MPLADS 2017-18 Work Proposed by Sri K K Ragesh,Honble MP(RS) in Wandoor Block Area- Ayyancode water supply Scheme Ward 19 Thrikkalangode Grama Panchatath

Amount

Appendix. A.Construction of Open well

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

od287149/2017_2018 : earthwork in excqavation by mechanical means (hydraulic excavator manual means over areas exceedihnng 30cm in depth 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m first depth

od287152/2017_2018 : earthwork in excqavation by mechanical means (hydraulic excavator manual means over areas exceedihnng 30cm in depth 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m first depth

od287153/2017_2018 : earthwork in excqavation by mechanical means (hydraulic excavator manual means over areas exceedihnng 30cm in depth 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m first depth

od287156/2017_2018 : earthwork in excqavation by mechanical means (hydraulic excavator manual means over areas exceedihnng 30cm in depth 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m first depth

5.7 : Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.9.12 : Centering and shuttering including strutting, etc. and removal of form for:Well steining

50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

Appendix B. Pumping main and Distribution

50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

50.18.9.4.2 : Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2

50.18.9.3.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25 mm dia 12Kfg/cm2

18.12.2 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work20 mm dia nominal bore

18.15.2 : Providing and fixing brass bib cock of approved quality :20 mm nominal bore

od287159/2017_2018 : Supplying conveying and fitting 63 mm PVc pipe6kg/cm2 for stand post including all charges

18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

APPX.C.STEEL FABRICATED BOOTH PUMP HOUSE PUMP ERECTION

od10603/2018_2019 : Supply and erection of electrically driven best quality reputed make open well type submersible pumpset capable of discharging the design discharge against the designed total head.The pump should be with bronze impeller,stainless steel shaft,and all accessories such as main switch,starter ,voltmeter,suitable size sheet metal panel board,etc.complete.Vide order no.KWA/HO/SP/333/2011/pumps dtd 20-12-2011 for Rs.18135/HP

od10604/2018_2019 : Supplying and erecting steel fabricated Booth pumphouse of size 150X150X200cm made of MS Angles and flat of suitable size with 4nos of intermediate post,necessary braces cvering with GI sheet,GI sheet roofing including conveyance at site loading and unloading charges and fixing on concrete blocks etc.complete

Appendix .D. Platform & Water tank

9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

MOHAMMED ABDUL RAZAK NK

Bidder Name

MUJEEB RAHMAN TK

MOHAMMED ABDUL RAZAK NK