8475 REPAIR TO JOINERY LIKE DOORS, WINDOWS ROOF TREATMENT, ATT, ROLLING SHUTTERS, PETTY REPAIR TO B/R ASSETS AND CERTAIN MICELLANEOUS WORKS AT NSTL VISAKHAPATNAM AND DRDL KALINGA

Amount

Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified.

Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified.

Taking down shutters of any description n.exc.1Sqm each, all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc. 1Sqm and not exc. 2Sqm each, complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2.00 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed.

M & L for inspecting joinery and carrying out petty repairs, easing adjusting door/window/kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed by Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer-in-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S & F MS butt hinge cold rolled medium weight 100mm size

S & F anodised aluminium barrel tower bolt 150mm long.

S & F 'D' type handle aluminium anodized 125mm in size.

S & F Aluminium Sliding Bolt of Size 200mm

M & L plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat or both sides or of veneered particle board mediam density wood particle board with commercial face veneerd supplied and fitted to chowkats

S & F 2nd class hardwood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into sauares with plain chamfered or rounded mitred and rebated sash bar all as specified in SSR Part - I section 8 clause No. 8.20

S & F flush shutters 35mm thick, solid core construction, with block board core and plywood face panel, commercial type on both sides and one face covered with deocrative face venner with lipping/frame work to mach all as directed.

S & F MS butt hinge cold rolled medium weight 125mm size

S & F anodised aluminium barrel tower bolt 200mm long.

S & F 'D' type handle aluminium anodized 150mm in size.

S & F Aluminium Sliding Bolt of Size 300mm

S & F 300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller plate complete

S & F 2nd class hardwood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into sauares with plain chamfered or rounded mitred and rebated sash bar all as specified in SSR Part - I section 8 clause No. 8.20

S & F MS butt hinge cold rolled medium weight 75 mm size

S & F anodised aluminium barrel tower bolt 125mm long.

S & F Aluminum Hooks & eye of size 150mm fixed to window shutter

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S & F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed

S & F 4.8 mm thick sheet glass frosted, on one side quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts or lugs to a depth exceeding half brick but not exceeding one brick from the face of jamb and making good dismantled portion in cement concrete 1:2:4, type B-1 as required all as specified and as directed.

All as per item No.29.00 here-in-above but in stone masonry walls

M & L Two coat of synthetic enamel paint over a one coat of pink primer including preparation of new or previously untreated wooden or wood base surface of any description, not otherwise described over 10cm with or girth, complete all as specified and directed by Engineer-in-charge.

S & F in repair tubular towel rail 600mm long of PTMT fixed with & incl CP brass screws & plastic cleats min wt 170gm complete.

S & F in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys, fixed in repairs, including cutting holes in existing pressed steel frames, all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frame and provided & fixed with new ones complete all as specified and directed

S & F in repairs 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed.

S & F repairs 4.8 mm thick sheet glass frosted, on one side quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed.

S & F 50 mm micron reflective type sun control film sticked to glass panes as per manufacturer's instructions all as specified and as directed including taking down old.

S & F in Repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs anodised aluminium barrel tower bolt 150mm long.

S & F in repairs 'D' type handle aluminium anodized 125mm in size.

S & F in repairs Aluminium Sliding Bolt of Size 200mm

S & F in repairs anodised aluminium barrel tower bolt 200mm long.

S & F in repairs 'D' type handle aluminium anodized 150mm in size.

S & F in repairs Aluminium Sliding Bolt of Size 300mm

S & F in repairs anodised aluminium barrel tower bolt 125mm long.

S & F in repairs in repairs Aluminum Hooks of size 150mm fixed to window shutter complete all as directed.

S & F only in repair 300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller plate complete all as directed.

S & F in repairs for18mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work with decorative veneer on one face complete all as directed.

S & F in repairs in block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nail complete all as directed.

S & F 30mm flap continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F in repairs 30mm flap continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F magnatic catcher for cup board shutters including necessary screwed complete all as specifie dand directed by Engineer-in-Charge all as specified and as directed.

S & F in repairs 2nd Class HW Plain filltes, sqaure or recatangular in section clean sawn, secured with nails or brnds of size exc 6 to 13 Sq .cm complete all as directed.

M & L 2nd Class HW Boarding of size 25mm thick , planed on both sides and fixed with nails including dismantling old boards complete all as directed.

S & F Hasp and staple,aluminium anodised , 100mm size including bolt to hinges plate and fixed with screws complete all as directed.

M & L Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cm 1:6 complete all as directed.

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or iveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Hold fasts similar work con- forming to Fe.290.Gde-E-165 complete all as directed.

M & L for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S & F Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight upto 60kg, fixed in repairs all as specified and directed.

Removing existing grills from window and refixing the same after carrying out repairs for windows to external side of buidling complete all as directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S & F Steel rolling shutters of thickness 1.25mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, manual operated type with chain wheel and hand chain complete all as specified and directed.

S & F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as directed.

M & L for preparation New steel and iron surfaces of any description not other wise described over 10 cm width or girth and applying Two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed on stee shutters all as directed.

M & L for repairs and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioning and making good the disturbed surfaces of walls to match with existing complete all as directed by the Engineer-in-Charge (NOTE: (i) Quoted rate is inclusive for replacement all minor spare parts as required and supply of major spare part such as MS Spring, ball bearings, laths, shaft pipe, gear set required for replacement will be measured and paid separately under relevant items.

S & F MS spring for rolling shutter fo any size or any lenght completer all as specified and directed.

S & F ball bearing of for rolling shutter completer all as specified and directed.

S & F gear set for rolling shutter completer all as specified and directed.

M & L in repair of rolling shutter shaft assembly including all necessary fittings complete all as directed.

S & F mortise lock steel 6 lever chromium plated with double handles for single shutter to match with existing one and fixed to true position in repairs. Make : Godrej , Universal

Repairs to collapsible gates removal, replacement of worn out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning complete all as specified and as directed.

(a) M& L for mechanical cleaning of surface to make it free from any bituminous residue /dirt, oil and Greece etc all as specified and directed by GE/Engr-in-Charge. (b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt/loose materials etc and filling with polyurethane based sealant with and including application of PU based primer all as directed by GE/Engr-in-Charge . (c) M&L for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same materials after dilution of water at 50% or specific primer matching same materials as per manufacturer specification and as directed by GE/Engr-in-Charge. Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic. (ii) UV Resistance. (iii) Adhesion to concrete. (iv) Tensile strength – not less than 2.0 N /Sq.mm for free film. (v) Elongation – not less than 300%. (vi) Solid content by weight- not less than 60% (vii) Air/water permeability BSEN 12390 at 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0 mm. (viii) Accelerated weathering (ASTM453) : Pass 1000 hours. (ix) Reaction to fire – non inflammable.

M & L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45º at 150mm centre to centre and sealing the same complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M & L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M & L for uPVC factory made, white colour louvered ventilators made of extruded profiles with figured/ frosted glass louvers; profiles of frames and sash will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete as directed by the Engineer-in-charge.

M & L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M & L for non - skid coloured ceramic tiles 7 to 8mm thick, 300x300mm size, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:4) complete all as specified.

M & L for glazed ceramic digitally printed tiles of size 300x450mm, 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified.

M & L for vitrified tiles, double charged, first quality of size 600x600mm, 9 to 10mm thick as in Floors, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)]

M & L for vitrified tiles, double charged, first quality for skirting cut from tiles of size 600x600mm, 9 to 10mm thick, to suit the size of floor tile, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)]

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid and including 15mm thick screed bed in CM (1:4) complete all as specified.

S & F II nd class H/W plain solid straight chowkats or frames rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints .

RAVI VARMA JAMPANA

B SRINIVAS

SRI LAKSHMI GANAPATHI CONSTRUCTIONS

SRI SRK ENGINEERS

cevelworck

ESWAR CONSTRUCTIONS