Tender on Providing and Erecting cable and switchgear in Gir Wildlife Hospital and Treatment centre at Sasan of Sanctuary Range, Wildlife Division, Sasan-Gir

Name of Work :- Providing & Erecting Cable & Switchgears in Veterinary Hospital at Sasan, Dist. Junagadh

SOR NO Iteam Description Qty. Unit Net Rate Total

1 1-3-2-B Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & 460 Mtr 33.33

Clamps with following dia of pipes, in approved

manner as directed (b) 25 mm

2 1-4-4-e providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, 310 Mtr 56.56

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required.(e) One wire 6.00 sq. mm

3 1-4-4-g (g) One wire 16.00 sq. mm

4 1-4-4-h (h) One wire 25.00 sq. mm

5 1-4-4-j (j) One wire 50.00 sq. mm 20 Mtr 470.66

6 3-3-2-F providing and erecting Approved make Three Phase &

Neutral LT Heavy Duty Switch Disconnector Fuse Unit

Cubical type for panel mounting complete with

operating mechanism suitable to operate on 415V

A.C. , 23A duty With HRC fuses of suitable load 1 Ea 11086

confirming to IS. 13947 (Part I & III). of following

capacities.(f) 300/320 Amp

7 3-4-1. Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all 10 Ea 6173.1

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

8 3-4-3. Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal 2 Ea 16222

connections, spreader tinned copper & complete

erected in existing 16 G.M.S.housing ICS=100% of

ICU only Cat III

SOR NO Iteam Description Qty. Unit Net Rate Total

9 3-4-4. Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all 1 Ea 20946

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

10 3-6-8-E Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

11 3-8-2-A Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, 2 Rmt 1961.4

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing

cubical panel with necessary connections.(A) Suitable

for 100 Amp. Capacity

12 3-8-2-C (C) Suitable for 300 Amp. capacity

13 3-10-3-B Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat-III

14 3-10-5-b Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (b)40 Amp. Cat-III

15 3-10-5-C (c)63 Amp. Cat-III

16 3-11-3. Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB 6 Ea 108.07

17 3-14-5 Providing and erecting HOT deep Galvanised iron

strip wire 8 to 16 SWG. 2.5 Ea 77.77

SOR NO Iteam Description Qty. Unit Net Rate Total

18 3-14-9-A Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth

resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of 6 Ea 4591.5

earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary

test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil Length

of pipe - 1 Mtr Back filling compound - 1 Nos Bag of

19 3-16-1-C Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles with

3.9 Sq.Mtr 16392

locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.(C)

The standard companies switch gear shall be used and only

manufacturers as per IEC 61439 for beneficial use. (i) with

SOR NO Iteam Description Qty. Unit Net Rate Total

20 3-16-4-B Providing and erecting ,Fabricating the box type items

made from M.S. Sheet with A.I. supports, wings,

doors, handles other hardware materials as per

requirement design with finishing by three tank powder 350 Kg 180.79

coating processed inside and outside painted, erected

as directed including minor civil work.

21 4-1-3-B Supplying & erecting XLPE(IS:7098) (I)-88 ISI

unarmoured Aluminium cable 1.1 KV.grade to be

erected as directed of following size. (B)4 core 4 Sq.

22 4-3-3-H Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (H) 3 25 Mtr 904.96

1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

23 4-3-4-A Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with 250 Mtr 117.16

necessary clamps or in existing trench / pipe of

following size of cables (A) 4 core 4 Sq. mm

24 4-3-4-B (B) 4 core 6 Sq. mm

SOR NO Iteam Description Qty. Unit Net Rate Total

25 4-3-5-B Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in 680 Mtr 190.89

existing trench / pipe of following size of cables (B)

26 4-5-2-B Making trench in Hard Murrum / Tar Road of suitable

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back

filling the same and making the surface as normal 910 Mtr 357.54

ground. (B) If additional machinery like hammer driller

or JCB use [Add]

27 4-5-6-D Supplying following size of Light duty “A” Class G.I .

Pipe & erecting as directed by Engineer-in-charge. 98 Mtr 696.9

(D) 100 mm dia.

28 4-5-8-A Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for 860 Mtr 62.62

laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

29 4-6-1-A Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.(A) 2 to 1 Ea 33.33

4 core 2.5 / 4 Sq. mm

30 4-6-1-E (E) 2 to 4 core 25 Sq. mm

31 4-6-3-G Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber ring

for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of 3 Ea 238.36

cables.(G) 3 & 1/2 core 185 Sq. mm

32 4-7-1-A Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an 4 Ea 6.06

approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

SOR NO Iteam Description Qty. Unit Net Rate Total

36 6-6-1-A Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S. Sheet with

angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door

internally supported on both side, with internal and

outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one

is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS

of 1962 (A) 150 X 90 X 75 cm section pillar fabricated

from 14 Gauge MS Sheet with angle iron legs 95 cm

long made from 40 X 40 X 6 mm thick MS angle.

37 6-6-2-B Supplying and erecting HYLAM sheet on existing

angle iron frame.for following thickness (B) 4mm 3 Sq.Mtr 771.64

38 6-4-3-C Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & 8 Ea 476.72

washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(C)150mm

x 125mm x 100mm [deep]

39 6-4-3-H (H) 300mm x 200mm x 135mm [deep]

40 9-5-2-A Supplying & erecting approved make motor control

cubical panel (Direct - on - line) made from 16 G.

CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter 2 Ea 7722.5

each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload

relay & contactors will be of L & T, Siemens or BCH

make only. (A) DOL up to 5.0 H.P.

41 9-7-1-C Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

approved make of following Size.(C) 3 Core x 4 Sq. 350 Mtr 146.45

Amount put to Tender

ime of work:Providing & Erecting Cable & Switchgears in Gir Wildlife Hospitaland Treatment Centre at Sasan,Dist. Junaga

cuna4*4brmlouer d Cable Watt wiresq.m One wiresOo16q.m One wiresqI/25.m One wire

piller cS4*25aqb.lme Flat

Sgwql1.a8mnd5 gS6lqa.nmd Sg25ql.amnd GSlqa.nmd R185Sq.mmlug Sq.mm95Lug Sq.mmLug 25Sq.mmLug LugSq.mm4

FP MCB DPMCB40A SMC(BoxBig) (SMCBoxsmal ) cSG185aqb.lme cS4*6aqb.lme cS4*4aqb.lme |5Omm

B3Aus0bar 1b0usbAar SFU-300A Change M-3C0BA MNC20BA MwCA10BA FP

g25mmland 25mmlug sDtaOrtLer

40A Earthing |Strip |3*4 Flo d sg.m One