Building Work

Construction of I.C.D.P. Upkendra at Toranvera, Ta. Khergam, Dist. Navsari.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 291.70 Cumt 120.01

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

2 Excavation for foundation for depth from 1.5 m to 3.0 104.70 Cumt 166.35

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 22.00 Cumt 471.69

20 cm. Thickness including watering ramming and

consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in 136.50 Cumt 133.65

trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

5 Filling foundation and plinth with murrum or selected 122.00 Cumt 296.29

soil in layer of 20 cm in thickness including ramming

watering and consolidating etc. complete

6 Applying general insecticide pest control treatment to 81.90 Sqmt 51.52

floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5 SC. As Per

Part -II (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 liters chemical/ sqm of surface

is recommended as per I.S.

7 Providing and laying cement concrete 1:3:6 (1- 5.70 Cumt 3080.90

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

8 Providing and laying controlled cement concrete 62.45 Cumt 4336.94

M150 for curing complete including cost of formwork

but excluding the cost of reinforcement for reinforced

concrete work in PCC

9 Providing and laying controlled cement concrete 64.30 Cumt 4566.72

M250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work for Foundations, Footings , Mass

concrete , for Footing

Item Description of Item Quantity Unit Rate In Amount

10 Providing and laying controlled cement concrete 4.30 Cumt 7253.82

M250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work for ,Column Upto GL

11 Providing and laying controlled cement concrete 21.70 Cumt 6153.93

M250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work for ,Plinth Beam/Ground Beam

12 Providing and laying controlled cement concrete 10.40 Cumt 5582.17

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Plinth Slab,

13 Providing and laying controlled cement concrete 0.90 Cumt 7287.15

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Column Upto PL

14 Providing and laying controlled cement concrete M- 16.80 Cumt 7204.77

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts

and struts For GF

15 Providing and laying controlled cement concrete M- 2.60 Cumt 7204.77

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts

and struts For FF

16 Providing and laying controlled cement concrete 8.70 Cumt 6114.67

M.200 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Ground floor Beams,

17 Providing and laying controlled cement concrete M- 0.30 Cumt 6270.87

200 and curing etc. complete including the cost of

form work and reinforcement for reinforced concrete

work in (c) Chhajja for Ground floor

18 Providing and laying controlled cement concrete M- 0.70 Cumt 7403.05

200 and curing etc. complete including the cost of

form work and reinforcement for reinforced concrete

work in (c) Lintal for Ground floor

19 Providing and laying controlled cement concrete 9.60 Cumt 6870.61

M.200 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Ground floor Slab

20 Providing and laying controlled cement concrete M- 3.20 Cumt 6314.70

200 for RCC work and curing complete including the

cost of form work but excluding the cost of reinforced

concrete work in coping on Ground Floor

Item Description of Item Quantity Unit Rate In Amount

21 Providing and laying controlled cement concrete M- 1.00 Cumt 6314.70

200 for RCC work and curing complete including the

cost of form work but excluding the cost of reinforced

concrete work in coping on F Floor

22 Providing IS Mark TMT FE-500D bar reinforcement 16367.00 Kg 77.37

for RCC work including bending & placing in position

complete up to All floor Level

23 Brick work using common burnt clay building bricks 32.00 Cumt 4121.55

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional below plinth

24 Brick work using common burnt clay building bricks 32.30 Cumt 4403.40

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional For GF

25 Half Brick masonry in common brunt clay building 26.80 Sq m 669.34

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (B)

Conventional in super structure. for GF

26 Half Brick masonry in common brunt clay building 48.60 Sq m 669.34

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (B)

Conventional in super structure. for FF

27 Providing and fixing 150 mm wide, approved quality 53.10 Sqmt 295.93

chicken wire mesh at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by

nails, rowal plugs or tag before applying the plaster,

including curing, scaffolding all complete as directed.

28 Providing 15mm thick cement plaster in single coat 235.50 Sqmt 182.15

on Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement

:4-sand). For G Floor

29 Providing 15mm thick cement plaster in single coat 53.40 Sqmt 182.15

on Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement

:4-sand). For F Floor

Item Description of Item Quantity Unit Rate In Amount

30 Providing 10 mm. Thick cement plaster in single coat 65.00 Sqmt 155.55

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4

(1 cement : 4 sand) smooth finish etc. complete. G

31 20 mm thick Sand faced cement plaster with 547.80 Sqmt 361.58

1cmx1cm grooves as suggested by this office

consisting of 12 mm thick backing coat of C.M. 1:3 (

cement : 3 coarse sand ) and 8 mm thick finishing coat

of C.M. 1:1 ( 1 cement : 1 coarse sand) for all heights

as directed etc. complete. and as per pattern sample

aprroved by the architect or directed engineer in-

32 Providing throating or plaster drip and moulding to 3.90 Rmt 43.22

R.C.C. Chhajja.

33 Applying two coats of Acrylic lapy (putty) & two coats 353.90 Sqmt 40.59

of primer of approved brand and manufacture on new

wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

34 Wall painting (two coats) with plastic emulsion paint 288.90 Sqmt 81.05

of approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

35 Painting (two coats) with plastic emulsion paint of 65.00 Sqmt 86.60

approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

36 Wall Painting (Two coats) with weather proof 547.80 Sqmt 117.40

acraylic emulsion paint of approved brand and

manufacture and of required shade on exterior wall

surface to give an even shade over and including

primery coat with Alkaly resistance primer of

approved brand after thoroughly brushing surface to

remove all dust and remains of loose powdered

material etc. copm. for all height

Item Description of Item Quantity Unit Rate In Amount

37 Providing and laying broken chine mosaic flooring for 61.00 Sqmt 765.97

terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme

out upto surface using white cement including

rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic acid

etc. as directed.

38 Providing and laying cement concrete flooring 1:2:4 61.00 Sqmt 370.13

(1-cement : 2- coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished

with a floating coat of neat cement. (B) 50mm thick

39 Providing Plinth Protection to Building including 50.20 Sqmt 2308.86

excavation in ordinary soil and laying cement

concrete 1:3:6 using stone aggregates of 40mm

nominal size in foundation layer 125 mm thick+

125mm thick sand layer below pre-cast Rubber Dye

inter locking concrete block 60mm thick with grade of

concrete M300 pneumatic compressed by

mechanically pressed and as per approved design

including 75mm Sand layer for levelling and filling

the joint with sand in proper line and level etc.

complete, Including Providing and fixing pre-cast

concrete kerb stone of grey cement based concrete

block 30cm length, 30cm height and 15cm thick made

of M250 grade concrete as per approved design and

including excavation for fixing in proper line and

level, filling the joint with C:M 1:3 (1cement:3 fine

sand) etc. complete.

40 Providing and fixing Approved Brand (30mm) Three 5.80 Sqmt 3363.60

track alluminium window standerd extruded colour

anodized aliminium section with Frame having frame

bottom member @ wt. Of 1.223 Kg/Rmt , frame Side

and top member @ wt. Of 1.685 Kg/Rmt with sliding

shutters of single glass shutter top bottom member @

wt. Of 0.839 Kg/Rmt & side member @ wt.of

Kg/Rmt & Inter lock member @ wt.of 0.731 Kg/Rmt

with 5 mm thick transparent plain float glass in

shutter including fitting, fixtures, rubber gasket and

transparent silicon sealant as per drawing and

instruction of Engineer - in - charge etc. completed for

window three track

Item Description of Item Quantity Unit Rate In Amount

41 Providing & Fixing in position standard extruded 0.40 Sqmt 2722.96

approved colour anodised Aluminum Ventilation with

outer frame 65 x 25 x 1.50 mm Stander Box Frame @

Wt 0.833 kg/Rmt with 5mm thick fixed ground glass

fixed to alluminium strip blade fixed or adjestable

ventilation & including all required materials,

fixtures, fastenning, labours and equipments as per

detailed drawing as directed. For Ventilators

42 Providing and fixing 35mm thick flush double door 3.00 Sqmt 4711.65

shutter with 100x50mm wooden frame , solid core for

durable grip of hinges & Double shutter with

required 75x35mm wooden batten having 1mm thick

pattern lamination on both side, Durable Grip shall be

providing with both side 60cm long stainless steel

handle , 2 tower bolts and aldrops including

necessary Locking system , S.S. fixtures & fastenings

etc. directed by engineer in charge.

43 Providing and fixing 35mm thick flush single door 4.20 Sqmt 3910.72

shutter , solid core for durable grip of hinges & single

shutter with required 75x35mm wooden batten

having 1mm thick pattern lamination on both side,

Durable Grip shall be providing with both side 60cm

long stainless steel handle , 2 tower bolts and aldrops

including necessary Locking system , S.S. fixtures &

fastenings etc. directed by engineer in charge.

44 Providing and fixing FRP frame size 100 x 50 mm and 1.90 Sqmt 2363.40

35 mm thick ( Fiber Glass with PUF Injection ) FRP

depress panel Single or Double shutter having extra

reinforcement on sides & edges in Gel coat finish.The

core of the both shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done

in situ along with embeded wooden pieces for

stiffening & also taking hinges & fintures.The whole

FRP frame & single or double shutter is to be

waterproof, weatherproof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & S.S fixtures &

fastenings & fartener sleeve.Colour and Shade

approved by Engineer-In-Charge.

45 Providing & Laying 60 x 60 mm GVT vitrified 8 mm 52.50 Sqmt 1213.01

thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring

and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete shade approved by directed engineer in-

Item Description of Item Quantity Unit Rate In Amount

46 P & L 60x60 cm GVT vitrified 8 mm thick tile risers of 5.00 Sqmt 1218.06

steps,skirting Dedo of cement mortar 1:3 (1cement :

coarse sand)and jointed with by adhesive materials

including colour cement slurry including finished

with flush pointing & cleaning the surface etc.

complete for including colour approved by directed.

47 Providing and laying antiskid ceramic tiles 30 x 30 cm 2.50 Sqmt 994.32

size 6 mm thick in flooring treads of steps and landing

laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in

48 Providing and laying primium printed glazed tiles 24.60 Sqmt 1477.25

tiles size 30 x 60 cm 8 mm thick in skirting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement

slurry etc completed.

49 Providing and laying machine cut free edge machine 2.20 Sqmt 944.35

Green Marble Slab 18 to 20 mm finished treads and

risers in length with 1cm projecting nozing rounded

moulding in ttread laid over 20 mm (av.) thick of CM

1:6 on treads and 10mm thick CM 1:3 on risers

jointed with grey or colour cement slurry including

rubbing and polishing incl. making Three No.s of

grooves of size 3mm X 3mm along the length of treads

50 Providing and fixing frosted finished 600mm x 0.80 Sqmt 6008.49

1200mm glass urinal partition with crystalline Dhar

polish on exposed edges, supported by SS legs and

fitting bracket clamp with cut holes and silicon

grouting, including all accessories and labor charges

directed by the engineering in charge, etc. complete

51 Providing and fixing mirror polished 18 mm thick 25.50 Sqmt 2277.55

Green Marble stone with full round edge and polished

of approved quality in clading on sill and around the

doors/ windows/ ventilation with 12 mm thick

cement mortor CM (1:4) and fixing with cement

slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc.

52 Providing and fixing pre-cast Rubber Dye inter 78.20 Sqmt 704.07

locking concrete block 60mm thick with grade of

concrete M200 pnumatic compressed by mechanically

pressed and as per approved design including 75mm

Sand layer for levelling and filling the joint with sand

in proper line and level etc complete.

Item Description of Item Quantity Unit Rate In Amount

53 Providing and fixing M.S Safty Grills having 16mm 18.20 Sqmt 2183.62

Solid MS Squre bar Horizontally at every equal 0.10m

C/C distance and 2 no of bar Vertically at every equal

0.375m C/C distance Fixing on around (5x40) mm

Solid MS Patti including cutting, welding and

fabrication etc; including one coat of primer of

approved quality and two coats of oil painting as per

detail drawing etc. complete as per directed Engineer

54 Providing erecting and fixing double coated PVC. (ISI) 5000.00 Litre 3.95

water tank of required capacity each with all

necessary fittings and connection etc. complete on

55 Providing laying and jointing in true line and level 54.00 Rmt 195.67

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

56 Providing laying and jointing in true line and level 34.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

57 Providing laying and jointing in true line and level 30.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

58 Providing laying and jointing in true line and level 15.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Description of Item Quantity Unit Rate In Amount

59 Providing, laying and jointing in true line and level 10.00 Rmt 834.38

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all

60 Providing, laying and jointing in true line and level 20.00 Rmt 857.65

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all

61 Providing, laying and jointing in true line and level 75 10.00 Rmt 737.30

mm dia. UPVC SWRType B pipe conforming to IS

13592-1992 with one end plain and other end

socketed with rubbering and fitting conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp at every 2000 mm c/c or shall be conceled

in walss as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

62 Providing and fixing in PVC SWR cowel went 75mm 1.00 No 16.16

dia to pipes.(B) 75mm dia.

63 Providing and fixing in PVC SWR cowel went 110mm 4.00 No 29.29

dia to pipes.(B) 110mm dia.

Item Description of Item Quantity Unit Rate In Amount

64 Providing and fixing PVC SWR Nahni trap IS 14735 for 2.00 No 585.37

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

65 Providing and fixing wash down water closet 1.00 No 2885.57

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve

with polythene float CP brass handle unions and

couplings for connection with inlet out let and over

flow pipes 40 mm dia porcelain enameled flush bend

including cutting holes in walls and making good the

same connection the flush bend with cistern and

closet vitreous china.

66 Providing and fixing stainless steel grab 22 cm x 60 1.00 No 1492.78

cm on door and handicapped toilet including all

fixture and accessary etc completed as per directed

engineer in charge.

67 Providing and fixing ball cock of approved. quality as 2.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

68 Providing and fixing washbasin with single hole for 1.00 No 2052.32

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

including Brass waste, and M I fisher union fittings

including pvc connection and waste pipe & all

necessary fittings For All Floor (A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In

69 Providing and fixing 600mm x 450mm bevelled edge 1.00 No 851.13

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

70 Providing and fixing C.P. brass towel rail comlete with 1.00 No 616.42

C.P. brass brackets fixed to wooden plugs with C.P.

brass scews.(B) 600mm x 20mm size

71 Providing and fixing screw down bib taps of following 2.00 No 186.83

size.(A) Brass screw down bib tap polished bright. (i)

Item Description of Item Quantity Unit Rate In Amount

72 Providing and fixing Urinal of approved quality 1.00 No 1584.86

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

73 Providing laying (to level or slopes) and jointing 182.00 Rmt 678.01

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete.(D) 300mm

74 Providing and fixing S.W. gully trap with C.I. grating 1.00 No 1246.92

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

75 Constructing brick masonry chamber for 13.00 No 3223.92

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line.

76 Constructing brick masonry chamber for 8.00 No 3933.95

underground C.I. Inspection C.I. Inspection chamber

and bends with briocks having croshing strength not

less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete (i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

77 Extra over items for every additional depth of 0.1M. of 5.00 No 242.39

part thereof beyond 450mm depth for Brick masonry

chamber.(i) for 455mm x 610mm size.

78 Extra over items for every additional depth of 0.1M. of 5.00 No 264.86

part thereof beyond 450mm depth for Brick masonry

chamber.(i) for 500mm x 700mm size.

Item Description of Item Quantity Unit Rate In Amount

79 Providing and fixing MS Ladder of required pattern 500.00 Kg 102.01

with MS flats(30x3mm) or round or square bars

(12mm) at required spacing & with round headed

bolts and nuts or screws or welding including primer

coat of approved quality and two coats of oil paintas

as directed by engineer in charge

80 Constructing drinking/Handwash Platform of 18 1.20 Sqmt 5248.97

mm thick Polished Black Granite having 0.45m width

and 0.60m height including 0.60m support at every

0.7m c/c with cementing Materials / adhsives

including makeing necessary grooves in walls iwith

all labour material of approved quality incl. full

moulded round front edge granite strip of one side

polished and jointed with grey cement slurry

including rubbing and polishing etc. complete for all

81 Providing and fixing in position 300 mm high, 150 20.00 No 1333.20

mm wide English letters made from 1.0 mm thick

stainless steel sheet as directed by Engineer in charge

with all necessary tools & plants etc. complete.

82 Providing and fixing in position 150 mm high, English 20.00 No 686.80

letters made from 1.0 mm thick stainless steel sheet

as directed by Engineer in charge with all necessary

tools & plants etc. complete.

83 Providing and fixing of Ridge flashing for roof panel 35.90 Sqmt 694.39

shall be made out of 0.5 mm thick pre coated GI sheet .

The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side

of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel

members by pop rivet or self drilling/self stitching

fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete.

84 Steel work, welded in built up sections framed work 2393.30 Kg 91.08

including cutting,hoisting, fixing in position and

applying a priming coat of read lead paint. (A)In

beams and joists, hannels angles Tees, flats, with

connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and the like.

Item Description of Item Quantity Unit Rate In Amount

85 Constructing Manhole with R.C.C. top slab in 1:2:4 mix 1.00 No. 11042.74

(1-cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:3

(1-Cement : 3-coarse sand) finished with a floating

coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished smooth

complete including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep including C.I. cover

with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of

cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm

thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5- Coarse sand) (1) A

type depth 0.90 Metre for 150mm diameter sewer

86 Providing and fixing and floor 10.0 Kg. F/Cm2 50.00 Rmt 339.05

working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

87 Providing and fixing and floor 10.0 Kg. F/Cm2 10.00 Rmt 696.90

working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)180 mm

88 Providing junction for rain water juncton chamber of 1.00 Nos. 9330.38

size 0.60x0.60x0.75m with excavation of size

1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete

including brick masonary wall in CM 1:6 of 0.75m

height & 0.23m thick with 15mm thick cement plaster

inside & outside & 1.06x1.06 RCC (1:2:4) slab of

thickness 0.15m with CRS steel and 0.60mx0.45m cast

iron manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

89 Providing and installation Recharge pit of “RAIWOHA” 1.00 Nos. 109645.60

Make 3 layer RCC Precast Injection well system of size

1.5 meter Dia. X 3.4 Meter Height rein forced concrete

precast three layer module with 6” dia x 12” dia. V

wire screen of 0.75mm x 1.0 mm Slot size in SS

material and 1.0 meter height with MS Top cover and

required Air vent including all necessary excavation

and transportation at site including required filter

media for the recharge system as per site

Item Description of Item Quantity Unit Rate In Amount

90 Drilling of min. 250 mm dia. bore hole in all strata 30.00 Rmt 1252.32

including dualover burden strata by combination

DR/DTH rig including lowering 200 mm dia MS ERW

pipes in bore hole and testing etc.all work as per

directed engineer incharge.

91 Supplying slotted PVC pipes of approved quality at 30.00 Rmt 555.50

site of work confirming to IS. 1239/1974 180mm dia.

92 Construction of granular sub-base 150 mm thick by 21.70 Cum 583.78

providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading I

(B.T. stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to

4.75 mm - 45 % and 2.36 mm below - 20 % )including

spreading in uniform layer with motor grader on

prepared surface, mixing by mix in place method with

rotavator at OMC and compacting with vibratory

roller to achieve the desired density etc. complete.

93 Providing and fixing pre-cast concrete kerb stone of 46.00 Rmt 370.68

gray cement based concrete block 30cm ength,30cm

height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing

in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

94 Box cutting the road surface to proper slope and 57.00 Cum. 106.81

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto upto All lift and lead..

95 Providing, laying and compacting natural sand & 8.00 Cum. 259.57

gravel[ C.B.R. not less than 20%] below sub base

course including carriage of materials spreading in

uniform layer manually on prepared base and

compacted with vibratory roller to achieve desired

density including all materials, labour etc. complete.

96 Providing and laying wet mix macadam base course 24.00 Cum. 648.42

250 mm thick in two layers using machine crushed

B.T. chips as per required gradation mixing with

required optimum quantity of water, conveying the

mix to site of work, spreading in to grade and camber

with mechanical paver and consolidation each layer

with vibratory roller including cost of material labour

plant and equipment etc. complete.

97 Compaction and finishing of cement concrete road by 70.00 Sqm 65.65

trimix process providing extra Labour charges for the

trimix vacume dewatering service process on cement

concrete road sutface by using vacuum dewatering

pump floater surface vibrator including making

groves and rough finish to surface including leveling

Item Description of Item Quantity Unit Rate In Amount

98 Providing and fixing concertina coil fencing with 58.00 Rmt 864.56

punched tape concertina coil 600 mm dia 10 mt

openable length having 50 no rounds per 6 mt length,

upto 3mt height of wall with existing angle iron

(50mm x50mm x5mm )requird shaped As per

Directed Engeenier in charge. placed 2.4mt or 3.00mt

apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips

to retain horizontal, including necessary bolts or

G.I.barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced

barbed tape (R.B.T.)/Spring core (2.5 mm thick) and

weight 43.478 gm/meter at compound wall for ESR

M4/ intakewell.

99 Constructing providing and fabricating cattle guard 9.00 Sqmt 5129.79

using channel section frame of size ISMC series

mm x 50 mm (Weight 9.20 kg/Rmt) and ISMC section

100 mm x 75mm (weight 11.50 kg/Rmt) intermediate

support for welding G.I.pipe at 12 Cm C/C of size

mm in a frame made of Channel section size 100 mm

x 50 mm all round including fixing the unit on

prepared chamber of masonary wall using MS hold

fast embeded in masonary wall top as directed by

Engineer in charge and as per drawing and necessary

required arrangement etc complete.

100 Earthwork in cuting in all sorts of soil and soft 1.00 Cumt 91.64

murrum including conveying and spreading the stuff,

embankment as and where directed within

200meters from the end of the cutting with all

required lead and lift.(C) Above 400 Meters upto

101 Earthwork for embankment including breaking clods, 127.00 Cumt 165.25

dressing with all lead and lift (excluding watering and

consolidation)(E) From Borrow area within all lead

102 Rolling of earthwork in layers with power roller 127.00 Cumt 22.89

including filling in depressions which occur during

the process and Watering of earth work as directed.

103 Point wiring for Light / Bell with 2-1.5 sq.mm & 12.00 Pt. 582.77

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of

pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete, Cat. III

Item Description of Item Quantity Unit Rate In Amount

104 Point wiring for FAN with 2-1.5 sq.mm & earth wire 6.00 Pt. 809.01

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

105 Point wiring for on board Looped Plug with 6A 6.00 Pt. 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories, Cat. III

106 Providing following type of Modular Type Accessories 1.00 Nos 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (3) Two Pin/RJ-11 Telephone

Socket [A] For One Gang, Cat.III

107 Providing following type of Modular Type Accessories 3.00 Nos 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (8) Computer RJ-45 socket,

108 Providing following type of Modular Type Accessories 4.00 Nos 199.98

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (10) 6/16Amp. Universal

socket, Cat.III

109 Providing following type of Modular Type Accessories 4.00 Nos 280.78

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (15) 32 Amps. DP switch with

Indicator, Cat.III

Item Description of Item Quantity Unit Rate In Amount

110 Providing and erecting ISI mark Medium class RIGID 96.00 Mtr. 24.24

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed. (a) 20 mm

111 Providing and erecting Mains with 1.1 kV grade FRLS 225.00 Mtr. 104.03

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories(b)

wire 2.5 sq. mm

112 Providing and erecting Mains with 1.1 kV grade FRLS 120.00 Mtr. 140.39

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size(A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

113 Providing and erecting Mains with 1.1 kV grade FRLS 35.00 Mtr. 184.83

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size(A) with medium class

Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

114 Supplying and erecting Flexible PVC insulated multi 18.00 Mtr. 58.58

strand multi core 1.1 kV grade ISI marked copper

wires of following size to be erected as directed.(e)

1.50 Sq.mm 3 core round PVC sheathed

115 Supplying & erecting approved make Telephone Cable 30.00 Mtr. 20.20

electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable

for telephone wiring & confirming to C-DOT erected

in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.[A]

Conductor Size 0.5 mm., (a) Unarmoured, (2) Two

116 Supplying & erecting approved make LAN cable of 90.00 Mtr. 47.47

following size in existing pipe as per direction. [C]

Item Description of Item Quantity Unit Rate In Amount

117 Providing & erecting Switch board for Computer or 3.00 Nos. 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

directed. 1 no. 6A/16A universal plug-switch

combined, 3 nos. 6A Switch, 3 nos. 6A 5 pin Plug, For

Modular Type Accessories, Cat. III

118 Providing & erecting Decorative call bell Ting-tong 1.00 Nos. 71.71

box type 250 volts complete erected.

119 Supplying and erecting LED indoor fittings with LEDs 10.00 Nos. 535.30

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt, LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (v) 36-40 Watts, Surge-2 kV, IP-20,

conventional 4 feet, Cat.III

120 Supplying and erecting led lamps with following 1.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5, (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts, Cat-III

Item Description of Item Quantity Unit Rate In Amount

121 Supplying and erecting LED street light / Flood light 6.00 Nos. 4248.06

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio > 0.45, Luminaire

efficacy > 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.(ii)

48 - 59 Watts, Cat-III

122 Providing and erecting Miniature circuit breaker 6.00 Nos. 297.95

single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark, Cat-III

123 Providing and erecting Miniature circuit breaker 8.00 Nos. 123.22

single pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996

with ISI Mark , Cat-III

124 Providing & erecting 240 V MCB double pole switch 6.00 Nos. 329.26

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity. (A) 6 to 32 Amp., Cat-

125 Providing & erecting 240 V MCB double pole switch 2.00 Nos. 362.59

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity. (B) 40 Amp., Cat-III

126 Sheets steel powder coated enclosure suitable for 3.00 Nos. 176.75

incorporating One/Two nos. MCB.

127 Providing and erecting Sheet Steel powder coated 2.00 Nos. 1492.78

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

suitable for(A) single phase incoming and horizontal

single phase outgoing, (b) sheet steel double door (IP-

43), (iv)12 way

Item Description of Item Quantity Unit Rate In Amount

128 Providing and erecting Approved make RCCBs 3.00 Nos. 2458.34

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat. III

129 Providing and erecting Annealed bare Copper wire 10.00 Kg. 794.87

130 Supplying & erecting earth pit of minimum bore 2.00 Nos. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2% (C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal

soil, Length of pipe - 1 Mtr., Back filling compound -

Nos Bag of 15 Kg.

131 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI 160.00 Mtr. 112.11

armoured cable Aluminium conductor for 1.1 kV. to

be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (B) 2 core

132 Making trench in soft soil of suitable width of 90 cm 65.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

133 Providing & laying approved make Double walled 65.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II) with necessary connecting accessories

of same material at required depth in existing trench

for laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

Item Description of Item Quantity Unit Rate In Amount

134 Providing and, fixing heavy duty flange type brass 14.00 Nos. 38.38

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.(B) 2 to

4 core 6 Sq. mm

135 Solder less crimping type Aluminium lugs conforming 56.00 Nos. 6.06

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/ cadmium plated nut

bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

136 Providing & erecting Approved make Power Saving 6.00 Nos. 1948.29

45 - 50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in

137 Supplying and erecting 19 / 20 mm. nominal bore 6.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

138 Supplying & erecting fan hook box of 10 mm M.S. 6.00 Nos. 108.07

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

139 Supplying & erecting approved make low noise 1.00 Nos. 1703.87

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.250mm with

140 Supplying & erecting approved make SMC press 6.00 Nos. 476.72

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip

5way (3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(C)150mm

x 125mm x 100mm [deep]

141 Supplying and erecting B class galvanised iron pipe 6.00 Nos. 343.40

32 mm outside dia 45 cm long duly welded on 20 cm x

20 cm x 3 mm thick M.S. base plate, erected on wall or

corner for mounting street light luminaire with

necessary hardware materials duly painted.

Item Description of Item Quantity Unit Rate In Amount

142 Supplying & erecting approved make Digital time 1.00 Nos. 3168.37

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required

with necessary connection erected as directed.

143 Supplying & erecting power contactor, AC3 duty for 1.00 Nos. 1883.65

time switch complete erected as per direction Cat III

(B) 2 pole 250V 32 Amp.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt. mentioned

in all the tender.

Deputy Executive Engineer Executive Engineer

Chikhli ( R & B ) Sub Division Navsari ( R & B ) Division

Chikhli Navsari