REAPIR/MAINT OF INCINETORS, FIRE FIGHTING SYS, FIRE ALARM SYS AND CONNECTED ITEMS AT AFS PHALODI

Amount

Supply,fixing and istallation fire alarm control panel 220v AC micro contoller based, 4 zone addressable & fault monitoring,separate LED display, 8 hours battery backup, controll switch, LED indication made of CRCA sheet with powder -coated finish and the degree of protection IP54, the panel shall be provided with software for programing complete all as specified and as directed

Supply and fixing Battery 12 volt, 7 mAh dry type suitable for fire alarm control panel make and model as per existing all as specified and directed.

Supply and fixing PVC multistrand FRLS cable with copper conductor 1100 volt, of size 2 core 1.5 sqmm suitable for fire alarm system complete all as specified and directed.

Supply and fixing in replacement of detectors complying with certified to EN-45 addressable type multisensor detector with heat and smoke combination with base with self built intelligence as per IS:11360. complete all as specified and directed.

Supply and fixing in replacement testing and comissioning of manual call point resettable type suitable for addressable type fire alarm system complete all as specified and directed. Note:- Make shall be genuine and as per existing make.

Supply and fixing in replacement testing and comissioning analouge addressable type fault isolator module capable to monitoring shorted loop circuit and outomatically restore communications when shorted conditions are corrected complete all as specified and directed.

Supply and fixing in replacement testing and comissioning addresseable electronic sounder cum strobe complete all as specified and directed.

Supply and fix in replacement testing and comissioning of fire alarm control panel 220v AC micro contoller based, 4 zone conventional type & fault monitoring,separate LED display, 8 hours battery backup, controll switch, LED indication made of CRCA sheet with powder -coated finish and the degree of protection IP54 complete all as specified and as directed.

Supply and fix in replacement testing and comissioning of fire alarm detector heat and smoke combination conventional type with base as per existing make and model complete all as specified and directed.

Supply and fixing in replacement conventional type manual call point of fire alarm system resettable type complete all as specified and directed.

Supply and fixing in replacement Hooter PVC body 12 v DC red colour for fire alarm sound level 90-110 db complete all as specified and as directed.

M & L for painting to fire huydrant system and its connected parts complete,electric motor , monoblock pump,hydrant branch pipe,hydrant hose box,all type of valve, suction and delivery pipe line of size 80mm to 150mm scraping old paint and apply two coat of enamle paint as per exting colour including marking of IN- OUT water pipe line complete all as specified and directed.

Supply, installation, testing & commissioning in renewal of non percolating flexiable hose (RRL type- A' ) ISI marked (IS:636) 63 mm dia and 15 metre long, instantaneous type Stainless steel 63mm dia, ISI marked male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5mm dia copper wire as per fire standard comepete all as specified and directed.

M & L in renewal of 63mm dia stainless steel short branch pipe instantaneous inlet, made threaded outlet, 15mm bore nozzle short, ISI Marked (IS:903) complete all as specified and directed.

Supply and fix Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed.

Supply and fixing pressure gauge 8"dial 0-21 kgs rating complete all as specified and directed.

Supply and fixing pressure switch universal type pressure range 0.2 to 7 bar complete all as specified and directed.

Supply and fixing in replacement testing and comissioning of manual call point resettable type suitable for addressable type fire alarm system complete all as specified and directed. Note:- Make shall be genuine and as per existing make.

Supply and fixing in replacement testing and comissioning analouge addressable type fault isolator module capable to monitoring shorted loop circuit and outomatically restore communications when shorted conditions are corrected complete all as specified and directed.

Supply and fixing in replacement testing and comissioning addresseable electronic sounder cum strobe complete all as specified and directed.

S & F in renewal of Thermal overload relay 24 to 40 Amps & confirming to relevant IS/IEC complete all as specified and directed.

S & F in renewal of Thermal overload relay 30 to 50 Amps & confirming to relevant IS/IEC complete all as specified and directed.

S & F in renewal of Thermal overload relay 45 to 75 Amps & confirming to relevant IS/IEC complete all as specified and directed.

S & F in renewal of Power contactor 3 Pole, 415Volt, 50Hz AC, 40 Amps & confirming to relevant IS/IEC complete all as specified and directed.

S & F in renewal of Power contactor 3 Pole, 415Volt, 50Hz AC, 50 Amps & confirming to relevant IS/IEC complete all as specified and directed.

S & F in renewal of Power contactor 3 Pole, 415Volt, 50Hz AC, 80 Amps & confirming to relevant IS/IEC complete all as specified and directed.

S & F in renewal of Timerblock 01 to 30Sec complete all as specified and directed.

S&F in replacement on / off switch (push button) complete all as specified and directed.

S&F in replacement indicating lamp with holder and cover as per existing complete all as specified and directed.

S&F in replacement volt meter analog type range 0 to 500 volt AC supply as per existing model , incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified and directed.

S&F in replacement Ammeter range 0 to 100 amp suitable for 3 phase AC supply as per existing make & model , incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified and directed.

M & L in renewal of Sprinkler rossette 25mm dia, stainless steel, IS marked complete all as specified and directed.

Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 4 core complete all as specified and directed. Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc. (ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately.

Repair/Maint to Incinerator and connected items including repair to electric panel control wiring, replacement of leakage fuel pipe, removing westage material from furnace, cleaning to water storage, complete painting to all parts of incinerator as per existing colour complete all as specified and directed.

Taking up or down 80 mm bore of pipe MS water mains (including all fittings), with fitting , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed. Note :- Excavation and earth work shall be measured and paid for separately.

Taking up or down 100 mm bore of pipe MS water mains (including all fittings), with fitting , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed. Note :- Excavation and earth work shall be measured and paid for separately.

Taking up or down 150 mm bore of pipe MS water mains (including all fittings), with fitting , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed. Note :- Excavation and earth work shall be measured and paid for separately.

S & F in replacement MS ERW pipe for fire hydrant system of size 150mm bore including fittings (MS bend, Tee, reducer ,socket), cutting welding grinding etc all as required at site laid in trenches complete all as specified and directed.

S & F in replacement MS ERW pipe for fire hydrant system of size 100mm bore including fittings (MS bend, Tee, reducer ,socket), cutting welding grinding etc all as required at site laid in trenches complete all as specified and directed.

S & F in replacement MS ERW pipe for fire hydrant system of size 80mm bore including fittings (MS bend, Tee, reducer ,socket), cutting welding grinding etc all as required at site laid in trenches complete all as specified and directed.

Supply, install, connecting and testing in replacement of Butterfly valve non return type size 80 mm bore,PN 1.6 (as per IS 5312), cast iron body, flanged ends, Valve seat steel rings (LT bronze) and fasteners stainless steel of ISI marked including jointing materials i.e rubber or fibre board, gaskets, nuts, bolts etc., complete all as specified and directed.

Supply, install, connecting and testing in replacement of Butterfly valve non return type size 100 mm bore, PN 1.6 (as per IS 5312), cast iron body, flanged ends, Valve seat steel rings (LT bronze) and fasteners stainless steel of ISI marked including jointing materials i.e rubber or fibre board, gaskets, nuts, bolts etc., complete all as specified and directed.

Supply, install, connecting and testing in replacement of Butterfly valve non return type size 150 mm bore, PN 1.6 (as per IS 5312), cast iron body, flanged ends, Valve seat steel rings (LT bronze) and fasteners stainless steel of ISI marked including jointing materials i.e rubber or fibre board, gaskets, nuts, bolts etc., complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed. Note-: All excavation will be done manually and any kind of electric/ AFNET cable , pipe line damage during excavation will be repaired by the contractor without any other payment.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified and directed.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply and fixing in renewal Fire brigade inlet connection 4 way valve as per existing inlet size complete all as specified and directed.

Supply and fixing fire hydrant valve single headed complete all as specified and directed.

Supply and fixing fire hydrant valve double headed complete all as specified and directed.

Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 150mm bore, confirming to IS-4038 complete all as specified and directed.

Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 100mm bore, confirming to IS-4038 complete all as specified and directed.

M & L general servicing and repair to automation fire hydrant panel work on pressure differential system for following electric, diesel driven fire hydrant pump set with complete testing of power/ control cable replacement iof faulty including lug connection,replacement of realy and trip circuit,measuring meter callibration , NO NC point cleaning ,complete burnt control wiring replace maint all connected accessories regarding serviceablity of fire hydrant control panel complete all as specified and directed.

Anil Builders (BID ID -3497489)