R/o NICU/PICU Ward in DYSPGMC at Nahan

Amount

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal al lead dressing of sides and bottom and backfilling in trenches with excavated suitable material. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Demolition of stone masonry below G.L. upto 1.5 metres depth including stacking of serviceable materials and disposal of un-servicable materials within 20 metres lead. Rubble masonry in cement mortar. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Dismantling textile covering in ceiling/ walling including frames and cover fillets stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Dismantling doors, windows and cleres ory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead. Not exceeding 3 sq.m in area including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) For thickness of tiles upto 25mm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing PVC ceiling fire proof complete of approved brand including all accessories including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 P.C.C. grade M-20 nominal mix 1:2:4 ( one cement : two sand: four crushed stone aggregate) including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Boulder filling under floors including all leads lifts and carriage of materials as per entire satisfaction of Engineer-in-Charge.

filling in plinth with sand and boulder under floors including watering ,ramming , consolidating and dressing comlete .including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size) treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistant heavy duty vtrified tiles Nitco or equivalent 600x600x10mm manufactured of approved shade and colour in flooring treads of steps and landings laid over 12nn thick cement mortar 1:3 (( one cement three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:- Cement Mortar 1:5 (1 Cement : 5 Sand) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 (ONe thousand two hundred eighty five) anodised transparent or dyed to required shade according to IS 1868. (One thousand eight hundred sixty eight) (Minimum anodic coating of grade AC 15(Fifteen ) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing grill in Aluminium including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior /interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Frosted Glass: 10mm thick.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass: 4mm thick.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreig matters sand papered smooth to give final matter finish to the surface complete.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Applying priming coat on wall cement primer including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous China water closet squatting pan (English type WC pan ) size 580mm (five hundred eighty milimetre) ( earth work,bed concrete, foot rest and trap to be measured and paid for separately (Orrisa Pattern) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing vitreous China wash down,water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orrissa Pattern including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 100mm ( one hundred milimetres) dia including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 110 mm dia. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing PVC fittings and accessories - Tee including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. 110mm Nominal Size.

Constructing man hole with Reinforced Cement Concrete top slab in 1;2;4 mix in (One cement two sand;four graded stone aggregate 20mm(twenty milimetre) nominal size,foundation concrete 1;4;8(One cement;four sand:eight graded crushed stone aggregate 40mm (forty milimetre) nominal size),inside plastering 15mm(fifteen milimetre) thick with cement mortar 1;3(One cement:three sand),finished with a floating coat of neat cement making channels in cement concrete 1;2;4mix (One cement;Two sand:four graded crushed stone aggregate 20mm (twenty milimetre) nominal size , finished smooth complete including curing and testing.Inside size 800x800mm ( eight hundred into eight hundred milimetre) and 500.00 mm (five hundred milimetre) deep including C.I.cover with frame.(Light duty single (seal) pattern-I) 455mmx610mm ( four hundred fifty five into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kgs (thirty eight kilogramme) ( Weight of cover 23 kgs (twenty three kilogramme) and weight of frame 15 kgs(fifteen kilogramme) with 300mm (three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 ( 1 cement: 3sand). including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing Aluminium sheet Ceiling with 1.00mm thick in Panal of Aluminium Channel base frame in ceiling with aluminium screws and aluminium beading 40*2mm etc complete.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing C.P. Jet includingcarriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- 15mm nominal bore including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- 25mm nominal bore including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing cast iron floor trap of self cleaning desion with sand cast iron screwed down or hinged grating with out vent arn complete including cost of cutting and making goods the walls and floors :- 100mm nominal diameter including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. 110 mm dia.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing 10.0/12.50/15.00 litres vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polygthene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush beng with cistern and closet (overflow pipe to be measured and paid for separately).

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- Flat back 630mmx450mm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. 610 x460 mm with boul depth 200 mm. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing C.P. Brass waste for wash basin or sink :- 32mm dia including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing 32mm(Thirty Two milimeter) dia.lead waste pipes for wash besin or sink including brass check nut including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing C.P. Brass Towell rail coplete with C.P. Brass brackets fixed to wooden pluges with C.P. Brass screws :- 750mm x 20mmm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing CP Brass towel ring complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws :-including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing brass bib tap (Superior or heavy type) :-15mm dia including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing CP Brass Pillar Tap with capstan head:-15mm(Fifteen milimeter) dia.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing P.V.C connection with brass unions :- 300/450mm length :- 15mm nominal bore including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing gate valve 25mm including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. Sintex Make including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing c.p. brass angle valve 15mm without Nuts and pipe. 15mm dia including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing 100 sand cast iron grating for gully, floor or Nahni trap. including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete 250x10mm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125 mm including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing brass hydraulic door closure with necessary nut bolts and screws all complete as per the direction of Engineer-in-Charge

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1Cement:6 Sand).including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and laying cement concrete 1:6:12 (One cement:six sand :twelve graded crushed stone aggregate 40 (forty) milimetre nominal size mechanically mixed and vibrated and curing complete excluding cost of centring and shuttering in: Foundation and plinth: including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars,ladders,railling,brackets and similar works.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing 0.60mm (Zeero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(Six millimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing ridges or hips 60 cm (Sixty centimetre)overall with 0.60mm (Zero point sixty millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty)microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing M.S. BP Sheet 1.66mm (One point sixty six millimetre) to 2mm (Two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Rakesh Chaudhary