REPAIR TO ROOF SHEET, JOINERY, FLOORING AND PLUMBING AT KOTDWARA UNDER GE LANSDOWNE

Amount

M&L in repair for providing E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as spd & directed by GE/Eng-in-Charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling ceiling board of insulation boards etc any thickness including cover filter complete all as specified and directed.

Taking down cement plaster, any desription on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately.

Supply only liquid water proofing admixture of make-pidilite or equivalent.

M & L for preparation of new surfaces of wall & applying two coats of colour wash complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed .

Dismantiling of timber scantling 40 Sqcm and above in section in any position, unframed work, complete all as specified and directed.

Dismantiling of timber scantling in fillets, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed (Make JSW , SAIL, TATA BLUE .)

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed (Make JSW , SAIL , TATA BLUE) .

S&F 0.63 mm thick galvanised zinc coated @ 120 gm / Sqm, corrugated mild steel sheeting in roof with two corrugations side lap fixed coach screws and washers , in roofs walls etc with grade of zinc coating 275 complete all as specifed and as directed (Make JSW , Tata , SAIL).

S&F for 0.63 mm thick plain galvanised mild steel sheeting using grade ‘O’ sheets with 120 gm Zinc (Spelter) coating Per Sqm both sides inclusive, as in ridges, hips, valley gutters, drip and straight flashing fixed with ‘L’ or ‘J’ type hook and washers complete all as specified and directed (Make JSW , TATA , SAIL).

M&L for PCC 1:2:4 type B0 (using 12.5 mm aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed.

M&L for second class soft wood as in scantlings, fixed in unframed work clean swan complete all as spd and directed.

M&L for second class soft wood clean swan plain fillets, square, rectangular in section screwed with nails exc 13 & n.exc 25 Sqcm complete all as spd & directed.

S & F for 20 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roofs, ceiling, partition, fascia, barge, soffit etc. (except flooring and skirting) complete all as specified and directed.

Demolition of cement concrete of ground floors and saving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Material & labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth by using extra cement complete all as specified and directed .

Supply only 3mm thick and 38 mm wide glass strips as in floor complete all as specified and directed .

Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

S.M. KAZIM

PIONEER REFRIGERATION AND ELECTRICALS

AMAR NATH SHARMA

SHRISHTI ENTERPRISES

Panwar Electrical