E Tender No 02/EDC(Kashipur)2024-25

Supply Item

Supply of Nut and Bolts

Supply of PG Clamp 95-25 SQ.mm. (As Per Specification & Drawing of UPCL)

Supply of PG Clamp 95-95 SQ.mm. (As Per Specification & Drawing of UPCL)

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for Distribution Box with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of Stay clamp for PCC Pole duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of M.S Clamp for PCC Pole with nut and bolts and washer for Suspension Clamp. (As Per Specification & Drawing of UPCL)

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 120 Sq mm to 25 sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 120 Sq mm to 120 sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6 mm. MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of M.S Clamp for PCC Pole with nut and bolts and washer for Dead End Clamp. (As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 25 mm. (As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 120 mm. (As Per Specification & Drawing of UPCL)

Pole & LT AB Cable Work

Cartage of Following Material by private truck from store centre Rudrapur /Haldwani/ Kashipur to dump store approx. distance 21 to 50 Km. including loading into truck and unloading at road work site.

PCC Pole

SP Pole SP-33

Head Load Cartage of Following Material approx. distance 0 to 1 Km. including loading unloading.

PCC Pole

SP Pole SP-33

Small Line Material including Conductor

Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 0.3 m deep below ground level connected to support with earth wire 16 swg fixing of all accessories in all respect as per Specification of UPCL.

Excavation of earth for Stay set pit of size 0.6x0.6x1.2 Mtr Length in all type of soil including proper dressing of sides and ramming of bottom including getting out soil and disposal of surplus excavation soil as directed complete work in all respect.

Erection of LT stay set with pole and stay rod on required tension as per specification of UPCL.

Grouting of Stay Set in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement:4 graded stone 20 mm nominal size:8 coarse sand) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per specification of UPCL.

Excavation of Earth for Pole Pit of Size (.9x.6x1/6) of pole length in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and diposal of surplus soil as directed complete work.

Erection of Follwing Pole Structure after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Single PCC Pole Structure.

Single SP Pole SP-33 Structure

Grouting of pole in size (.45x.45x1/9) length of support in CC ratio 1:4:8 (1Cement:4Graded Stone:20mm nomial size:8 coarse sand) Block Including cost of material in all respect.

Muffing of pole in size (.45cmx.6cm) radious with CC ratio 1:3:6 (1Cement :3core sand:6 graded stone 10mm nomial size) Block size 45cm height from ground level Including cost of material in all respect.

Dismantling of following Old ACSR Conductor from Existing LT Line including Re- rolling back etc.including stacking and transportation of material to the UPCL Central stores.

1 Phase 2 wire

2 Phase 3 wire

3 Phase 4 wire

Laying,Stringing and sagging of LT A.B Cable size (3x120+1x95 sq.mm) complete in all respect as per Specification of UPCL.

Labour Charges For Single Phase of Disconnection & Re-Connection of L.T.Consumer Service Connection.as per norms of UPCL.

Labour Charges For Three Phase of Disconnection & Re-Connection of L.T.Consumer Service Connection.as per norms of UPCL.

Installation of LT Distribution Box.

Looping and Chopping of Tree Branches

Laying of LT Cable 4x16 sq.mm

SHIKHAR ENTERPRISES

KUMAUN ELECTRICALS