CA NO CWE/AF AMB/SAR-55/2019-20 SPECIAL REPAIRS TO MULTI UTILITY TESTING HALL AT 1AFSB DEHRADUN UNDER GE AIR FORCE SARSAWA

Amount

Dismantling of wall or ceiling board any thickness, fibre,pulp,insulation etc, fixed in any position with nails or screws including cover fillets complete all as specified and as directed..

Demolition of plain cement concrete,un-reinforced, in ground floor and paving not exceeding 15 cm thick below or above ground floor including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Dismantling of chairs fixed type, of any description, make, position, fixed with nails or screws or adhesive and removing from site including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance n.exc 500 mtr complete all as specified and directed.

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and as directed

Material and labour for 50 mm thick PCC 1:2:4 type B2 using 40 mm graded mechanically crushed stone aggregates as in floor filling and mass concrete or in any position complete all as specified and as directed.

Material and labour for coloured dark shade vitrified tiles, premium quality, 10 mm thick polished ,square/ rectangular, area of each tile not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed. Notes :- (i) The rates includes for all straight cutting and waste including raking or circular cutting complete. (ii) All corners in wall tiling should be properly metred jointed to give monolithic uniform apprearance. (iii) The rates for tiling includes for laying to any pattern with one or more colour as directed. (iv) If tiles of different sizes are used then no price adusjtment shall be made.

Supply and fixing auditorium foldable writing tablet BWT of moulded PU foam 45+/-5 density, tubular steel structure for stand 25x50x1.6 mm, seat frame made of steel flat 25x5 mm thick, back frame of steel flat 25x3 mm thick, PPCP tray for seat & back cover, wooden polish arm rest without cup holder, 3 mm foam laminated fabric and foldable writing table desk of size 17 inches x 10 inches at the back , size of chair 21 inches by 22 inches CTC complete all as specified and as directed. Make:- Innovative Seatings Pvt. Ltd. (ISPL) or equivalent of Godrej, Durian, Methodex

Supply and fixing safe L-nose of size 56x40x3mm, slip resistant, refrofit glow in the dark stair/step nosing aluminium painted, in any tint,fixed with rivet or nails or screws or approved adhesive in concrete floor or in tiles etc complete all as specified and as directed.

Supply and fixing wooden flooring 5 to 8 mm thick, size of each plank not less than 0.24 Sqm with and including locking arrangements fixed in concrete surfaces in patches fixed with adhesives/screws/ nails as per manufacturers instruction after taking down the damaged wooden floor complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and as directed.

Material and labour for sound proof paneling of GI frame and pre-painted perforated calcium silicate board 8mm thick size 2430x1200mm backed with non woven tissue on the back side having density 790-850kg/cum water resistant,non combustible(fire proof) as per BS 476 part-IV,termite resistant and thermal conductivity 0.15w/m 0KC in approved design with 50mm resin bonded mineral wool backing of 48kg/m3 density. including providing and fixing of frame works made of special section power pressed/roll from GI sheet with zinc coating of both side channel 50mm wide having equal flanges of 32mm and 0.55mm thick,fixing to be floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.55mm thick ,fixed to the floor and ceiling at the pacing of 610mm centre to centre with dash fastener of 12.5 mm dia meter 50mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts,including fixing of studs along both end of wall lining fixed flush to wall/column with suitable ancher fastener or metal screws with nylon plugs at spacing of 450mm centre to centre.studs of 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick is to be provided at 1220mm centre to make frame work as grid of size 1220x610mm including filling of cavity with 48kg/cum density &50mm thick mineral wool.perforated calcium silicate board is to fixed to facing side of frame work by 25mm long dry wall self tapping screws with under head cutter on studs floor and celing channels at the spacing boards ar per approved design complete all as specified and directed.

Material and labour for sound proof 8mm pre-painted perforated calcium silicate false ceiling tiles size-595x595mm backed with non woven tissue on the back side having density 790-850kg/cum water resistant,non combustible as per BS 476 part-IV,Termite resistant and themal conductivity 0.15w/m 0KC in approved design(Calsi micro square/calsi sand textured in hole) to be laid over grid and NRC of >0.85 with 50mm resin bonded mineral wool backing of 48KG/M3 Density all as specified by Engr-in-charge fixed celing tiles in horizontal level ,suspended on 15mm black groove inter locking metal gridn of hot dipped galvanized steel section consisting of main 'T' runner with suitably spaced joints to get required lenght and of size 15x38mm made form 0.30mm thick(minimum)sheet ,spaced at 1200mm long spaced between main 'T' at 600mm centre to center to form a grid 1200x600mm and secondary cross 'T'of length 600mm and 15x38mm made of 0.30mm thick (minimum)sheet to be interlocked at middle of 1200x600mm panel to form of 600x600mm and wall angle of size 20x15x0.40mm and laying false celing tiles of approved texture in the grid including requied cutting /making,opening for services like diffusers,grills,light fitting fixtures ,smoke detectors etc.main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners ,4mm GI adjustable road with galvanised butterfly levevl clips of 85x30x0.8mm spaced at 1200 centre to centre along main T.The bottom of T-section having exposed width of 15mm shall be pre-painted with polyester paint and a black groove running in length at centre complete all as specified and directed.

Material and labour for two coats of Oil bound distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc inluding taking down carefully by unscrewing from board/outlets/DBs/fittings etc such as switches,lamp holdes,brakets,ceiling fittings, bulkhead fittings,sketch fittings, tube light fittings, fan regulators,electric meters, meter bos any type etc and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and as directed .

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 25mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including flush boxes for modular switches including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one light/fan point controlled by one way modular switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including flush boxes for modular switches including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for modular socket outlet, multi pin,5 amp on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with and including flush boxes for modular switches including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for modular socket outlet, multi pin,5 amp on the same board with other switch complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etcwith and including flush boxes for modular switches including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one modular socket outlet, multi pin,15/16 amp on independent board complete all as specified and as directed. Notes for srl No. 16 to 19 :- (i) Modular cover plate with frame and modular Switch, socket outlet, fan regulator shall be measured and paid for separately. (ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match with the existing surfaces.

Supply and fixing modular switch 1 way 6 Amp 1 module ISI mark complete all as specified and as directed

Supply and fixing modular switch 1 way 16 Amp 1 module ISI mark complete all as specified and as directed

Supply and fixing modular socket outlet 2/3 pin,6 Amp combined 2 module ISI mark complete all as specified and as directed

Supply and fixing modular socket outlet 2/3 pin,6/16 Amp combined 2 module ISI mark complete all as specified and as directed

Supply and fixing modular white cover plate with frame of 02 module,ISI marked complete all as specified and as directed .

Supply and fixing modular white cover plate with frame of 03 module,ISI marked complete all as specified and as directed .

Supply and fixing modular white cover plate with frame of 04 module,ISI marked complete all as specified and as directed .

Supply and fixing modular white cover plate with frame of 06 module,ISI marked complete all as specified and as directed .

Supply and fixing modular white cover plate with frame of 08 module,ISI marked complete all as specified and as directed .

Supply and Fixing modular blank plate module 1 complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite, 65X50 mm three terminals ,230 volts,ISI mark complete all as specified and as directed.

Supply and fixing PVC board of size 30x25x5 cm deep complete all as specified and as directed.

Supply and fixing modular fan regulator step up type,120 watts , 2 module, including making necessary connections, to make it functional complete all as specified and as directed.

Supply and fixing in replacement MCB, SP, 5 to 32 Amps, 'C' curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCB, SPN, 40 Amps, 'C' curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCB, SPN, 32 Amps, 'C' curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCB, TP 63 Amps, 'C' curve, 10 kA capacity, 415 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCCB, TP 125 Amps capacity, 16 kA, 415 volts with fixed thermal and magnetic setting complete all as specified and as directed.

Supply and fixing in replacement MCCB, four pole, 200 Amps, 25 kA capacity, 415 volts with fixed thermal and magnetic setting complete all as specified and as directed.

Supply and fixing in replacement MCCB, four pole, 250 Amps, 36 kA capacity, 415 volts with fixed thermal and magnetic setting complete all as specified and as directed.

Supply and fixing vertical load line DB suitable for flush mounting and surface mounting with and including MCCB 160 amp ,triple pole and neutral, 16 kA, 415 volts with fixed thermal and magnetic setting with 250 Amps rated bus bar, 8 way, double door type flushed inside the wall including making good the disturbed surfaces after taking down/out material as existing at site complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,415 volts, single pole and neutral with 200 Amps rated bus bar 12 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing sheet metal enclosures with socket plug top and MCBs with a two pin, earth plug and socket with one single pole MCB 20 Amp, 'C' curve 240 volts,10kA including making nitch in walls and making good the disturbed surfaces,after taking down/out material as existing at site complete all as specified and as directed.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note :- Two runs of 4 sqmm cable alongwith One run of 2.5 sqmm cable as earth wire with conduit shall be measured as one length.

Supply and fixing rigid non metallic PVC conduit,medium grade, 20mm dia with & including all accessories , fixed as in walls complete all as specified and as directed

Supply and fixing rigid non metallic PVC conduit,medium grade, 25mm dia with & including all accessories , fixed as in walls complete all as specified and as directed

Supply and fixing exhaust/air fan, plastic body, single phase 230/240 volt of size 200mm sweep 900 RPM including embedded in wall and grouting of nuts,bolt & washers etc and making good to match the existing surface including louvers and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and as directed.

Supply and fixing energy efficient ceiling fan 230 volt ,1200 mm sweep with 3 blades, 5 star rating & all standard accessories like down rods of extra length etc required at site for effective functioning of fan, in and including making connection with three core copper cable of size not less than 1.5 Sqmm from ceiling rose to connector of ceiling fan complete all as specified and as directed.

Supply and fixing wall mounted fan AC single phase,230/240V,of size 400mm sweep with delivery not less than 100 CMM including rib guard pull cord control for speed & oscillation ON-OFF cord 3 speed option with swing oscillation control wide 90 degree sweep angle with wall mounted brackets & aero dynamically designed blades complete all as specified and as directed. Note for Ser No 46 to 48:- Old retrieved ceiling/ wall fan/ exhaust fan / air fan shall be deposited in MES store yard with proper RV.

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed with and including 3 nos, 8mm dia, 25mm long hexagonal head screw complete all as specified and as directed.

Supply and fixing air termination single pointed copper rod 12 mm dia, 300mm long on 40 mm dia GI pipe, medium grade,of length as required, duly fixed/secured with PCC or with GI wire supports after taking down/out rod as existing at site complete all as specified and as directed.

Supply and fixing copper strip 20 x 3.15mm on porcelain base insulators of suitable size with saddles and fixing screws etc.for roof conductors and down conductors above ground complete all as specified and as directed.

Supply and fixing response indicator unit with and including wiring & testing complete all as specified and as directed.

Supply and fixing addressable manual call point break glass type with alarm LED with and including LED,wiring & testing on completion complete all as specified and as directed.

Supply and fixing voltage stabilizer for automatic operation,single phase, AC,230 volt, 50 Hz time delay relay naturallly air cooled, indoor type, desinged for input variation between 170 volt to 250 volt with out put voltage stablizer at 230 V with accurancy of +2.50% and capacity 5 KVA complete all as specified and as directed.

Supplying, installation, testing and commissioning inverter type split air conditioner 3 star BEE rated all weather "Hot and Cold" of capacity 2 TR consisting of indoor and outdoor units ,evaporative and condensive units including manufacturer's recommeded size/type cooper tubing duly insulated for connecting the unit both indoor and outdoor along with PVC insulated copper conductor for electric power supply including all connected item for fixing complete all as specified and as directed. Note for Ser No 54 to 55:- Old retrieved AC indoor and outdoor units with stabilizers shall be deposited in MES store yard with proper RV.

Supply and fixing 20 watts 6500K LED battern, 2000 lumens fitting with extruded aluminium housing four feet with integated LED & electronic driver with and including LED 20 watt with all accessories pre-wired including connecting up with twisted copper flexible wire 23/0.0076mm after taking down fitting as existing at site complete all as specified and as directed. Make:- philips Cat No BN021C LED20S PSU CW GR S2 or Havells Cat Part No ENDURALINEARNEOBS20WLED865SPCWH or Wipro Cat Part No LL20-281-XXX-65AL1

Supply and fixing recessed mounted 3600 lumens, 6500K 2 feet by 2 feet LED ceiling light fitting with 60mm width CRCA body, opal acrylic diffuser, electronic driver system life 50000 hrs @ L70%, PF 0.95 THD<10% CRI>80 ect with and including LED 36 watt with all accessories pre-wired including connecting up with twisted copper flexible wire 23/0.0076mm after taking down fitting as existing at site complete all as specified and as directed. Make:- Philips Cat Part No RC380B LED36S -6500 G4 L60 W60 PSU O or. Wipro LM25-481-XXX-65-G1 or Crompton Cat Part No LCTLR-36-CDL

Supplying and fixing green spot gen 2 adjustable recessed spot for unique look in the ceiling light fiitting with opal acrylic diffuser, electronic driver, each system life 50000 hrs @L70%, PF 0.95, THD <10% CRI>80 etc with and including LED lamp with all accessories pre-wired including connecting up with twisted copper flexible wire 23/0.0076mm after taking down fitting as existing at site complete all as specified and as directed. Make : Philips Green spot Gen 2 DN311B LED12S-5000 PSR MB WH or equivalent of Wipro, Havells, Crompton

Supplying and fixing LED mirror light fitting 7 Watt 6500K comprises of aluminium extruded channel, frosted diffuser integrated electronic driver, IP-20 protection and all accessoness pre-wired including connecting up with twisted copper flexible wire 23/0.0076 mm after taking down fitting as existing at site complete all as specified and as directed. Make:- Crompton Cat Part No LCL 07 CDL - 7 W or equivalent of philips or Wipro

Supplying and fixing industrial double beam LED emeregency/light with exit sign, light beam double-12Watts LED beam with & including LED12 watts, plus 4 Watts exist display equivalent to 180Watts standard light, powder coated heavy duty steel sheet made body dismension 13inches by 3 inches by 12 inches, charging voltage 230 VAC with 3 to 4 hours back up, fully automatic on in case of input power failure and automatic off as power resumes with complete protection i.e battery over under change and short cicuit protection in-built including connecting up to make it functional after taking down fitting as existing at site complete all as specified and as directed. Make : Philips/Crompton /SKP Automatic system.

Supplying and fixing LED security light fitting 40 watt, 5500-6000 lumens > 1101 m per watt, 5700K with IP- 65/66 protection comprises of a pressure dia cast aluminium housing heat resistance toughened glass/polycabonate LED lenses surge protector,BIS electronic driver. etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 sq mm, 3 core for connections and 32mm bore, light grade, GI tube mounting bracket 1.5 meter in length,bend to shape at 140 degree in 'L' shape, fixed to wall with 02 Nos,40x5 mm flat iron clamps, nuts, bolts and washers etc after taking down fitting as existing at site complete all as specified and as directed. Make :-Wipro Cat Part No LR02-451-XXX-57-XX or equivalent of Philips/ Crompton/ Havells

Supplying, installation, commissioning and testing advance maintenance free envionment friendly ring earting system,each set consisting of 3 Nos , 10 feet long, 17 mm dia earth electrode made of high tensile low carbon steel circular rods, molecularly bonded copper on outer surface minimum copper bonding thickness 250 microns, with terminals to connect incoming strip 3 bags of 25 Kg each, of environment friendly backfill compound as per manufacturer's instructions with ROHs test certificate for each 150 X 25 X 6 mm copper bar with 4 hole exothermically welded on top to copper bonded rod to make terminal laid in minimum 80mm dia bore with manufacturer'e name embossed on rod, 25 X 3 mm copper shall be used to interconnected the earths and to make the ring with & including providing earth pit cover 300mm X 300mm made of polypropeline and testing on completion after taking down earthing as existing at site complete all as specified and as directed. Notes : (i) Earthing shall be tested after completion of work in presence of GE and proper record shall be maintained duly signed by all concerned. (ii) On testing if the desired earth resistance of less than 1.0 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. (iii) The cooper strip from test point to equipment or entire earthing system to Eqpt/bldg only shall be measured and paid seperetely.

Supply and fixing detector complying with and type certified to EN-45 addressable type multi sensor detector with heat and smoke combination detector photo electric/optical with base with self built intelligence as per IS-11360 including testing on completion with procure test certificate from autnorised company complete all as specified and as directed.

Supply and fixing fire alarm sounders/ Sirens, electronic type, horizontal two stage continuous normal operation for at least 50 minutes with sound level 65 db to 120 bd ,measured at 1.5 m with sound output variation of +5 db,1500m range including testing on completion with procure test certificate from authorised company complete all as specified and as directed.

Supply and fixing beam master detector, transceiver type with and including complete wiring and testing on completion complete all as spefified and as directed. Note :- Two year written warranty certificate shall be given by the contractor for replacement of part or rectification of any fault/defect noticed.

Supply and fixing loop addressable fire alarm panel unit including wiring,connected with beam detector and smoke detector alonwith alarm sounders and testing on completion complete all as specified and as directed .Note :- Two year written warranty certificate shall be given by the contractor for replacement of part or rectification of any fault/defect noticed.

Deduction of Total of Sch of credit amount Rs 111775.00

SUBHASH CHAND CONTRACTOR

RAMAPATI ENGINEERING SERVICES

SHRI RAM ENTERPRISES

sagar associates