UT-11-148 Ghansali Ghuttu MR km. 27 to VEENA Motor Road Stage-II

Amount

Repairs of damages caused by rain/spillage of water Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with three wheel 80-100 kN static roller, complete as per Technical Specification Clause 301.5.5.1 (Sub grade preparation)

Earth Work in filling with local soil, E & B for making proper super elevation including ramming, watering & dressing the surface to the required level & slope also including supply of all material, labour, T & P etc. repuired for proper completion of the work.

Earth Work in filling with local soil, E & B for making proper pattri filling including ramming, watering & dressing the surface to the required level & slope also including supply of all material, labour, T & P etc. repuired for proper completion of the work.

Coolie Walling for Edge /filling protection including supply of all material labour T&P. etc.as per drawing required for proper comletion of word as white washing complete as per the derection of Engineer - in - charge.

Excavation for Structures: - Earth work in Excavation foundation for cross drainage structures, retaining walls, breast walls & other similar structures in all types of soils and rocks as met at site with all leads, lifts and disposal of surplus earth as directed by engineer in charge including supply of all material labour, T&P etc. required for proper completion of work in accordance with the MORD specification.

Stone masonry in cement mortar (1:5) for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Random rubble masonry In cement mortar (1:5)

Random Rubble stone masonry for structure laid dry by locally available approved stone, including supply of all materials, labour, T&P etc required for proper completion of work as per drawing & as per MORD specification for retaining walls, breast walls & other similar structures as directed by Engineer-in-Charge.

Providing & laying filter media as Hand packed stone filling in the back of retaining walls, abutments, wing walls etc. by locally available approved stone including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge.

Providing and laying of boulder apron laid in wire crates with 4 mm dia G.I. Wire conforming to IS: 280 & IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification of MORD and as directed by Engineer in charge.

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction

Providing & Laying M10 grade plain cement concrete in open foundation as per MORD specification including all material labour T&P etc. as directed by Engineer in charge.

Pointing with cement mortar (1:3) in front side of parapet as per drawing and technical specification Clauses 613.3 and 1204.

15 mm thick Plastering with cement mortar 1:4 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.4

Providing & Laying M20 grade plain cement concrete in open foundation as per MORD specification including all material labour T&P etc. as directed by Engineer in charge.( for Scupper )

White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915

Providing and fixing of C.C edge stones 12cm X12cm X 60cm size precast in M15 cement concrete with 4 nos. 6 mm dia HYSD vertical bars and 3 nos 6mm dia MS bar stirrups as per approved drawing including two coat white washing on valley side of formation as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1907.

Reinforced cement concrete Grade M 25 in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 M 25

Providing & Laying M25 grade plain cement concrete in open foundation as per MORD specification including all material labour T&P etc. as directed by Engineer in charge.( for Causeway )

Providing & laying filter media as Hand packed stone filling in the back of retaining walls, abutments, wing walls etc. by locally available approved stone including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge.

Supplying, fitting and placing HYSD bar reinforcement in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202.

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. Using naturally occuring gravel

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. By Mechanical Means

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means

Prime Coat Providing and applying prime coat Low porosity with Bitumen emulsion (SS-1) complying with IS:8887 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.

Tack Coat Providing and applying tack coat with Bitumen emulsion (Rapid setting RS-1 grade complying with IS:8887 ) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared grangular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Open Graded Premix Carpet Providing laying and rolling of cold mixed open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm nominal size aggregates using penetration grade Cationic Bitumen Emulsion (Medium Setting MS Grade complying with IS:8887) to required line, grade and level to serve as wearing cousre on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per MORD Specification clause 506.2

Seal Coat Providing and laying seal coat by Bituminous Emulsion (SS-2) as for sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type B as per Technical Specification Clause 508.

Providing & fixing of Semi reflective Traffic Sign Boards (cautionary, mandatory & informatory) as per attached drawing duly painted and written as per the MORD specification and as directed by Engineer-in-charge.

Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per attached standard drawing duly painted and written as per the MORD specification and direction given by Engineer in charge.

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.

Providing & fixing of Maintenance Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as directed by Engineer in charge. as per MoRD specification Clause 1701 .

Maintainance Activities:

Major Slip Clearence in all type of soils, Rocks and boulders including cost of all material, Machine, T&p etc required for proper completion of work as per MoRD specifications of work 1611.

1st Year

2nd Year

3rd Year

4th Year

5th Year

Deploying Hydraulic Excavators of 0.90 cum Bucket for clearence of Major Slip in all type of Soil, Rock and Boulders including its Operator, POL, and all other charges required for proper completion of work.

1st Year

2nd Year

3rd Year

4th Year

5th Year

Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications 1301.

1st Year

2nd Year

3rd Year

4th Year

5th Year

Coolie walling including supply of all material, labour, T&P , royalty etc. required for proper completion of the work , as directed by Engineer-in-charge and as per PWD specifications 8.90 (For Opening Communication Only)

1st Year

2nd Year

3rd Year

4th Year

5th Year

Maintenance Under PBMC for (1) Trimming of grass and weeds from the shoulders/Berms and disposing of the same to suitable locations as per technical specification clause 1914. (2) Maintenance of road side drain including minor slip clearence reshaping, deepening and regrading as well as catch water drains as per technical specification clause 1907. (3) Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per technical specification clause 1903 (4) Maintenance of scuppers & culverts by way of clearing, cleaning, erosion repair, repair to crack, parapet walls and protection works as per technical specification clause 1908. (5) Maintenance of Causeway by way of minor surface repairs, replacing guide posts, repair of fixed gauges, removal of debris providing boulders and protection works and painting as per technical specification clause 1909. (6) Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. (7)Maintenance of 200 metre, km stones, by way of refixing of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 meter, km stone and 5th km stone as per drawing and technical specification Clause 1912. (8)Repairing of pot holes by removal of loose material, trimming of sides, cleaning of surface and providind tack coat bitumen emulsion and patch repair with 20 mm thick premix carpeting and type B seal coat using biyumen bitumen emuision(in 3rd and 5th year) (9)Two coat White washing on parapet walls of CD work, edge stones, tree truncks and prominent rocks, patches on hill sides including preparation of surface by cleaning scrapping etc. as per Technical specification Clause 191.

1st Year

2nd Year

3rd Year

4th Year

5th Year

Rajeev Kandrai