Construction of Convention Hall, Cottages, Sports Complex, and External Development Works

Amount

SH: EARTHWORK Clearing grass and removing the rubbish up to a distance of 50 m outside the periphery of the area cleared, including cost and conveyance of all materials, labour charges, tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sq.m on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed. The rate quoted should be inclusive of dewatering. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.The rate quoted should be inclusive of dewatering. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth.1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil, disposed earth to be levelled and neatly dressed within the site as directed by the Engineer-in-Charge.but for every additional lift of 1.5m to 3.00m or part there of. The rate quoted should be inclusive of dewatering. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil, disposed of the earth to be levelled and neatly dressed within the site as directed by the Engineer-in-Charge. but for every additional lift of 3m to 4.5m or part thereof. The rate quoted should be inclusive of dewatering. All kinds of soil.

Earth work in excavation by means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth. and 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil, disposed earth to be levelled and neatly dressed within the site as directed by the Engineer-in-Charge. but for every additional lift of 4.5m to 6m or part thereof.The rate quoted should be inclusive of dewatering. All kinds of soil.

Supplying and filling in plinth , or trenches, under floors, in areas with crusher sand including watering, ramming, consolidating and dressing including cost and conveyance of all materials, labour charges, lead, lift etc. complete at all levels as directed by the Engineer-in-Charge

Supplying and filling in plinth or trenches underfloors, foundations in areas etc with red earth in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Carriage of materials by mechanical transport including loading, unloading and stacking lead up to 5 km, including all lifts involved as directed by the Engineer-in-Charge. Excavated Earth

Excavating and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Shoring with sheet piles as per IS 2314 using sheet thickness not less than 6 mm and sufficient numbers of stiffness for supporting soil up to depth of 5 mtr including conveyance, labour, cost of all materials, machineries, driving and removal etc complete. as per specification & direction of Engineer-in-charge.(The method of Measurement shall be in Sq.Mtr in elevation area of the retained height). The Contractor has to submit design and shop drawing for the approval of Engineer in Charge prior to the execution.

Providing and applying Antitermite treatement by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatement and creating a chemical barrier as per IS 6313 (Part ll) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.(Plinth area only to be measured for the payment ) (The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experienced persons shall be employed for this purpose.)

SH: CONCRETE WORK Providing and laying autoclaved aerated cement blocks filling with broken AAC blocks laying in sunken portion with approved block in cement mortar 1:4 ,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and laying cement concrete of specific grade properly mixed and consolidated and finished using power troweller, including cost and conveyance of all materials, labour, curing, lead lift, etc. complete as directed by Engineer-in-Charge at all levels. For screed concrete 1:2:4 (1 Cement: 2coarse sand : 4 graded stone aggregate 6mm nominal size) - All work up to plinth level

Providing and laying rubble as soling layer on the sump bed up to PCC bottom, 30 cm thick in required profile including cost of all material, labour, dewatering, preparation of bedding surface, filling the voids with stone screens and compacting with excavator etc. as directed by Engineer-in -charge

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification all complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size) all complete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of 40 mm nominal size aggregate and 100mm crusher sand filling, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and laying cement concrete of specific grade properly mixed and consolidated and finished using power troweller, including cost and conveyance of all materials, labour, curing, lead lift, etc. complete as directed by Engineer-in-Charge at all levels. For screed concrete 1:2:4 (1 Cement: 2coarse sand : 4 graded stone aggregate 6mm nominal size) - All work up to floor V level

Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the P.C.C. under subsoil water with the quantity of P.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1 m, 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub - soil water conditions.

SH: REINFORCED CEMENT CONCRETE WORK Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 400 kg/cum. All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 400 kg/cum. All works above plinth level upto floor V level

Providing and laying in position machine batched, machine mixedand machine vibrated design mix cement concrete of M30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 410 kg/cum. All works upto plinth level

Providing and laying in position machine batched, machine mixedand machine vibrated design mix cement concrete of M30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability but excluding the cost of centering, shuttering and reinforcement, as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 410 kg/cum. All works above plinth level upto floor V level

Providing, hoisting and fixing upto plinth level precast reinforced cement concrete work in rectangular cover on drains, string courses, bands, copings, bed plates, anchor blocks etc including the cost of required centering, shuttering but , excluding cost of reinforcement, with M-25 grade cement concrete for RCC work, all complete as per direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more, all complete including cost and conveyance of all materials, labour charges etc. complete as directed by Engineer-in-charge

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more, all complete including cost and conveyance of all materials, labour charges etc. complete as directed by Engineer-in-charge

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights :: Columns, Pillars, Piers, Abutments, Posts and Struts including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Vertical and horizontal fins individually or forming box louvers band,facias and eaves boards including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Edges of slabs and breaks in floors and walls under 20 cm wide including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Weather shade, Chajjas, corbels,, RCC Gutter, Elevation Feature ( As per drawing ) etc. including edges including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies, RCC Gutter, Elevation Feature ( As per drawing ) (Plan area to be measured) including cost and conveyance of all materials, labour charges etc. complete as directed by Engineer-in-charge

Extra for laying reinforced cement concrete in or under water and / or liquid mud, including cost of pumping or bailing out water and removing slush etc., complete. The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1 m, 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub - soil water conditions.

SH : MASONRY WORK Providing and constructing Solid concrete block masonry M-10 grade in C.M1:6 (1cement, 6 coarse sand) with Solid blocks of 30x20x10 cm size or nearest and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works in super structure above the highest plinth level as directed by Engineer-in-Charge.

Providing and constructing Solid concrete block masonry M-10 grade in C.M 1:6 (1cement, 6 coarse sand) with Solid blocks of 30x20x15 cm size or nearest and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works below plinth level as directed by Engineer-in-Charge.

Providing and constructing Solid concrete block masonry M-10 grade in C.M1:6 (1cement, 6 coarse sand) with Solid blocks of 30x20x15 cm size or nearest and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift, etc. complete for all types of masonry works in super structure above the plinth level as directed by Engineer-in-Charge.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

SH : STEEL WORK Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing of external grade wooden finished powder coated non polish SS 304 grade handrail.Top & vertical members are ss square tubes of size 50x50x2.5mm supported by the base plate of 5mm thick fixed to the floor using anchor fasteners & intermediate horizontal members are ss square tubes 40x40x2 mm .The members are connected by welding.Top & Bottom members connected with synthetic hemp rope of 1cm dia , all complete as per the approved design / architectural drawing and approval of Engineer-in-charge. Rate is inclusive of all material,assembling, errection, welding, curvaturing, grinding, buffling,anchor fasteners, etc ,other accessories etc complete.-Railing Height – 1000mm from FFL-Stair and Ramp Handrail

Providing and fixing railing with bottom aluminium channel of size 120 mm x 42 mm (5.35 KG/Mtr) of approved brand and Top Rail with SS304 Grade of size 40 x 40 x 2 mm (IM055T/equivalent)and 12 mm thick Toughened clear glass is fixed to the groove with EPDM gasket, The bottom section is fixed to the floor using Hilti/Fischer or Equvalent Chemical Anchor Bolt, The rate is including welding, grinding, buffing, polishing and fixing the railing with necessary accessories of required size, all complete as per the approved design / architectural drawing and approval of Engineer-in-charge.Railing Height – 1000 mm from FFL-Balcony Rail

Structural steelwork in built up tubular, trussess and framed work including cutting, hoisting, fixing in position and applying protective coating on steel structures two coats of aliphatic polyurethene of 35 microns each per coat with not less than 45% volume solids and DFT of 35 micron each over a base coat of fast drying, high solids two pack epoxy coating not less than 80% volume solids of DFT 130 microns with primer coat of two pack epoxy not less than 71% volume solids and a DFT of 50microns or equivalent. All areas to be blast cleaned to Sa 2.5(ISO8501- 1:2007) before applying primer The rate shall including cost and conveyance of all materials, labour charges, lead, lift etc complete as directed by Engineer-in-Charge at all levels. (Protective coating on external steel structure shall be measured and paid separately)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses, staircase, handrail etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. Electric resistance or induction butt welded tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Structural steel works such as tees,angles,channels,RS joints,MS Steel plates, MS riverts riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying protective coating on steel structures two coats of aliphatic polyurethene of 35 microns each per coat with not less than 45% volume solids and DFT of 35 micron each over a base coat of fast drying, high solids two pack epoxy coating not less than 80% volume solids of DFT 130 microns with primer coat of two pack epoxy not less than 71% volume solids and a DFT of 50microns or equivalent. All areas to be blast cleaned to Sa 2.5(ISO8501- 1:2007) before applying primer The rate shall including cost and conveyance of all materials, labour charges, lead, lift etc complete as directed by Engineer-in-Charge at all levels. (Protective coating on external steel structure shall be measured and paid separately)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete s directed by Engineer-in-Charge at all levels.

Providing and fixing foundation bolts of minimum grade 8.8 including nuts and washers complete as per standards including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Providing and fixing of electrically operated perforated Rolling Shutter with powder coated finish of approved shades and standards, constructed of galvanized steel slats, guide rails and bottom profile,Mild steel roller cage assembly,side brackets with bearings, Automation system hardware and accessories shall have 2 hour Fire Rating. The Slat Curtain with High Grade Special quality galvanized steel interlocked slats as per BS standards and designed edge end lock to achieve maximum holding strength.Bottom Plate with Structured galvanized steel L-shaped section welded with angle stiffener/heavy tubes 35 x 35 x 5 mm. Side Guides with Specially designed box type galvanised steel side guides 3.0mm thk surface mounted type should guide the slat curtain smoothly.Mild Steel bracket plate shall have minimum of 3.0 mm thickness of required dimension .Bracket plate dimensions vary as per size of shutter. Load of shutters transfers through brackets.Roller Shaft shall be of Heavy-Duty with inbuilt reductiongears, In built mechanical limit units and thermal protector.Manual override shall also be added in case of power failure.The rate is including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. Size of the opening: 380 cm x 410 cm

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 ,M.S. top cover of required thickness for rolling shutters and one coat primer.80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured) including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Providing and fixing ball bearing for rolling shutters, including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Providing material and labour for fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

SH : JOINERY WORKS Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed Windows comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track,37 mm x 62 mm Shutter (1.2 mm thickness) using (1,2) 21 MM Dgu Toughened Glass-(5 MM Tg+10 MM Airgap +6 MM Tg) or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc as per drawing. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium work for wood finish fixed windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24.including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium work for wood finish Open windows with extruded outer frame section 60 mm x 50 mm, Shutter 100 mm x 60 mm, 73 mm x 51 mm (1.2 mm thickness).Using, 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent). Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing and fixing aluminium work for wood finish 2-Track 2-Shutter sliding glazed Windows comprising of aluminium multi- chambered frame with in-built roller track and sash extruded profiles of 55 mm x 41 mm Sliding Track,37 mm x 62 mm Shutter (1.2 mm thickness) using 6 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent). Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24. including cost and conveyance of all materials, labour charges etc as per drawing. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium work for wood finish fixed windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 8 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24.including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium work for wood finish fixed glass louver windows extruded profiles of Outer Frame 60 mm x 50 mm, 51 mm x 73 mm Mullion (1.2 mm thickness) . Using, 5 mm Toughened clear glass or required thickness (Saint Gobain / Equivalent).Fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / stainless steel screws,G.I zinc plated Hilti screw 8X80 mm size for fixing frame to finished wall and necessary stainless steel screws 8X9,8X19,8X24.including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.The gap, if any between the frame and RCC / Masonry wall shall be filled and finished with Silicon weather sealant. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket , Silicon weather sealant etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Single Door (Size:75 x 240cm) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4.The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Single Door (Size: 100 x 240cm) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4.The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Single Door (Size: 120 x 240 cm) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price(Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function,4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Single Door (Size: 105 x 240 cm) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed functionn,SS 304 grade Pull Handle 300x22 mm, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board (GERMANY) and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Single Door Size - 80 x 240 cm ) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, SS 304 grade Pull Handle 300x22 mm, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4, The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Double Door (Size : 120 x 240 cm) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, SS 304 grade Pull Handle 300x22 mm, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Double Door (Size : 150 x 240 cm) Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ No (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.

Supply and installation of fully glazed fire-rated unlatched double leaf door system with 120 minutes of integrity and radiation control (EW 120) with symmetrical (bi-directional) fire protection. The frames shall be made of cold rolled profiles. The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory.The glass shall be 14mm clear, non-wired, toughened, interlayered, 120 minutes fire-rated glass for integrity and radiation control (EW 120) and insulation (I 20) with a light transmission of 86% and a sound reduction of 38 db and manufactured in UL & TUV audited facility and including UL-EU Certification (File number R38101) and compliant to class 1(B)1category of Impact Resistance as per EN 12600. The glass shall be tested for 5000 hours of UV resistance as per EN ISO 12543-4. The glass shall be EPD (Environmental Production Declaration) verified in accordance to EN 15804 and ISO 14025 in which its life cycle assessment is performed considering Cradle to Gate system boundaries. The glass must produce a recycled content declaration committing to a pre-consumer cullet of up to 11% and post-consumer cullet less than 1%. The glass shall provide bi-directional (symmetrical) fire protection.The shutters should be fixed to the frame using Forster Weld-on hinges of dimensions 179mm X 20mm. The profiles shall have groves to incorporate Fire Resistant CR gaskets. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. Beading shall be clipped on using Stainless Steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6 mm Calcium Silicate setting blocks. The door should be fitted with mortise dead lock , offset pull handle 450 mm long and door closer . The inactive leaf should be fixed to the frame using tower bolt at meeting edge at top as per the tested evidence. The doors shall be manufactured in a TUV audited facility. Fire rating & production audited certificate to be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge GD (Size : 150 x 260 cm )

Supplying and fixing of frameless glass fully openable double leaf door 12 mm toughened and heat-soaked clear glass. The glass shutter should be polished on the edges. The shutter should be mounted with the required Floor Spring with SS cover plate, with adjustable spring strength depending on door width, 25mm diameter 450mm long SS pull handles of approved pattern, door stopper, door lock etc. All hardware is of SS mirror finish, 304 grade unless otherwise mentioned.The Patch Fittings & Floor Spring fittings shall conform to EN 1154 Standards with adjustable spring strength (EN1-4) All SS material shall be Mirror finish and glass shall be heat soaked. The rate shall include the cost and conveyance of all materials, all structures if any to support the door patch fittings, locking arrangements, all hardware, labour charges, lead, lift, cleaning and clearing the debris from all levels, and disposing complete as directed by Engineer-in-Charge and as per drawing at all levels. (The purchase price considered for door handles is Rs.2362/ set (excluding GST ) and any deviation plus or minus in the purchase price will be adjusted(paid extra or deducted) while making payment to the contractor).The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Providing and fixing insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel,panic bar, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating.The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet.Door leaf should be minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm(18gauge) thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 48 kg/cum. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. The NABL accredited lab certificate shall be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D5 ( Size : 200 x 240 cm)

Providing and fixing insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel,panic bar, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating.The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet.Door leaf should be minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm(18gauge) thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 48 kg/cum. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. The NABL accredited lab certificate shall be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge FD1 ( 120 x 240 cm)

Providing and fixing of Fully Insulated Non Metalic Fire cum Acoustic Wooden fire doors as per IS 3614:2021, for 120 min integrity & insulation. The door is manufactured made out of thoroughly seasoned hard wood. The moisture content of wood material used at the time of construction of wooden composite fire door sets comprises of both frame and shutter shall not be more than 15% approx. in accordance with IS 287. The offered door must carry acoustic properties certification test evidence. To achieve Acoustic prooperties, the shutter thickness should be minimum 77mm. Door and frame should be factory finished with fire retardent primer FR880. All accressesories like hardware, vision panel, fire seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must carry a label confirming to type of door & its fire rating.Door frame shall be Single rebate profile of section 140 x 90 mm made out of Ivory Coast ( 2nd Class )having density of 550-600 kg/m3 with factory made groove of suitable size so as to accomodate Fire seal of size 20x4mm An EPDM seal also to be provided in the frame to check spread of smoke.The frame must be primed with Fire retardant primer FR880 .Wooden shutter must be of minimum 77mm of thickness finished with 6mm thick commercial ply on both faces. The Shutter should be provided with 6mm thick commercial ply along with 1mm thick laminate on both faces . The composite thickness of the core insulation will be 63mm consists of minimum 10mm thick Calcium Silicate boards of Hilux / Pamtech make and treated wool Insulation material . The calcium silicate board must have Density not more than 900kg/m3 , having thermal conductivity 0.15W/mK . The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping . The NABL accredited lab certificate shall be produced.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge D6 (Size : 200 x 260 cm)

Providing and fixing of Fully Insulated Non Metalic Fire cum Acoustic Wooden fire doors as per IS 3614:2021, for 120 min integrity & insulation. The door is manufactured made out of thoroughly seasoned hard wood. The moisture content of wood material used at the time of construction of wooden composite fire door sets comprises of both frame and shutter shall not be more than 15% approx. in accordance with IS 287. The fire door must carry earlier test evidence as per IS/ISO 3008-1. The fire door must carry a successful test evidence fire door design from CBRI , Roorkee / IPIRTI / NABL accrediated lab which operates in accordance with ISO/IEC 17025 for its fire rating. The offered door must carry acoustic properties certification test evidence as per IS 9901- Part(III)-1981 , DIN :52210 Part VI-1989 , ISO ( Part-II) - 2016 - 2016/ASTM-E-90. To achieve Acoustic prooperties, the shutter thickness should be minimum 77mm. Door and frame should be factory finished with fire retardent primer FR880. All accressesories like hardware, vision panel, fire seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must carry a label confirming to type of door & its fire rating.Door frame shall be Single rebate profile of section 140 x 90 mm made out of Ivory Coast ( 2nd Class )having density of 550-600 kg/m3 with factory made groove of suitable size so as to accomodate Fire & smoke seal of size 20x4mm of approved make. The frame must be primed with Fire retardant primer FR880.Wooden shutter must be of 77mm thickness finished with commercial ply on both faces. The Shutter should be provided with 6mm thick commercial ply along with 1mm thick laminate on both faces . The composite thickness of the core insulation will be 63mm thick consists of PAMTECH / HILUX make calcium Silicate boards and treated wool Insulation material of 48kg/m3 including acoustic insulation . The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed wooden lipping . To achieve apporx. 32db properties necessary Acoustic seal set needs to be provided both in frame and shutter such as Perimeter seal in rebate of the main frame , Automatic drop down seal in bottom of the shutter and for double leaf application Artragal seal needs to be provided . These seals along with all hardware will be payable in extra items.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. D6 (Size : 100 x 240 cm)

Providing and fixing 12mm thick prelaminated three layer medium density particle board with decorative lamination on both side Grade I type II conforming to IS 12823 etc inpanelling fixed in aluminium doors windows shutters and partitionframe with CP brass / stainless screws etc. complete as per specifications. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing stainless steel adjustable friction window stays with necessary stainless screws etc screws etc complete as per specifications and direction of Engineer-in-charge. 255x 95 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium handles anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessaryscrews etc. complete 125mm as per specifications.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:150x10 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing & fixing compact laminate toilet front partition of following standard dimension which includes 600mm door size width made of 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and amino plastic resin treated decor papers on the finish surface. This includes providing and fixing in position necessary hardware made out of stainless steel (Grade 316) as per manufactures specification & Architects instructions like (1) Door knob, (2) Spring loaded hinges (3) Slide Bolt with occupancy indicators (4) Coat hooks. Toilet front partition with dimension of 2050 mm height x 1200 mm width which includes 600 mm door size width.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing & fixing compact laminate toilet front partition of following standard dimension which includes 600mm door size width made of 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and amino plastic resin treated decor papers on the finish surface. This includes providing and fixing in position necessary hardware made out of stainless steel (Grade 316) as per manufactures specification & Architects instructions like (1) Door knob, (2) Spring loaded hinges (3) Slide Bolt with occupancy indicators (4) Coat hooks. Toilet front partition with dimension of 2050 mm height x 1000 mm width which includes 600 mm door size width.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Proving and fixing urnial partition made of 12mm thick compact laminate size 450mm(D) x 1190mm(H) Fixed on wall with the help of SS grade 316 brackets including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.

Providing and fixing Toilet Cubicle with dimension of 2000mm Height x 1800 mm width which includes 750 mm door size width, 8/10mm thickness tempered glass by heating 690° C with international standards. An Anti Lime scale coating applied on glass, Hydrophobic chemical coated in glass for prevention of all kind of stains on the glass 2 years warranty for this application. This includes providing and fixing in position necessary hardware made out of brass , stainless steel (Grade 316) and treated aluminium channels as per manufactures specifications. Solid hinges come in brass with chrome coated stabilizer rod and towel rod coming in stainless steel, sliding rail in treated aluminium profile. Floor clamps stainless steel. All hardwares are covered 5 years Replacement warranty.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Supply and installation of Single glazed mullion free demountable glass partition using 11.52mm (5mm+1.52+5mm) Laminated Glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. The Glass to be fixed with the help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic if required. Glass thickness - 11.52mm (5mm+1.52+5mm) Laminated Glass. All Profiles are min 1.5mm thickness excluding 20 microns of Anodizing.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Standards applicable: • Structural stability test in accordance to BS 5234: Part2:1992 & EN 1991-1-1:2002 • Acoustic test for sound insulation in accordance to DIN EN ISO 10140-2 ASTME-E 90 • ALT profile sections are manufactured and tested in accordance to EN573-3, EN755-2, DIN EN 12020 T2 , non- dimensions manufacturing tolerance deviation DIN ISO 2768-1 class C = coarse • Toughened glass complies accordance to BS 6262 (glass supplier specification from market) • Environmental product declaration (EPD) rating accordance to ISO 14025 & EN 15804 • HPDs - Ref HPD Unique Identifier; 22451 & 22452 - Classification : 09 84 00 Acoustic Room Components

Supply and installation of WSF approved free-standing glass back wall for Squash Court made of 12 mm thick heat soaked toughened glass with four panels, 1 door, 4 fines, fixtures and fittings and all the materials required for erecting the glass walls. The height of the glass wall will be 2100 mm or nearest above the finished floor level. Glass fins shall be of 15mm thick and 300 mm wide at full height including fittings and the bolts that are embedded for the glass fins. The Lock and Handle shall be of SS 304 Grade, all the hinges except L Hinges shall be Black Powder coated, L Hinges shall be transparent of Acrylic material.The rate is including cost and conveyance of all materials,labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Only skilled and experienced persons shall be employed for this purpose.

Curtain glazing-Design, Supply installation, fixing and testing curtain glazing system at all heights consisting of powder coated aluminium frame and glass of approved make, aluminium frame work fabricated out of heavy duty Aluminium extruded profile, powder coated with durable thermosetting polyester powder coating by electrostatic spraying and hard stoved to not less than 60-micron thickness to comply with BS 6496:1994 (1991) and AAMA 2603-98 standard as per approved metallic shade. All aluminium members and profile shall be of AC-25grade as specified. Mullions & Transoms, extruded aluminium sections shall be of 6063-T6 alloy to be decided as per structural calculations. The aluminium members shall be protected with protections tapes all around the profile for safety against external scratches at site. (Protection tape shall be removed only at the time of handing over as per the instructions of Engineer In Charge).The anchoring /bracing of the Al. sections to the RCC slabs /beams /columns/block masonry shall be done with required number of non-corrosive galvanized extended brackets of approved design (Galvanizing to be done conforming to IS: 4759-1996 up to 610 gms per SqM, 80-90 microns thickness) with approved dash fasteners of minimum 12mm dia and depth of minimum 100mm, in the concrete/ stainless steel bolts including providing and fixing aluminium shims of various thickness to adjust the beam level and line variation. The anchoring system should be designed to withstand the dead load of structural wall as well as stresses due to wind pressure as per IS code 875-Part III. (MS frame work to be provided wherever required will be measured separately for payment).(The detailed structural design calculations & shop drawings both vetted by IIT shall be provided by the executing agency and mock-up based on approved design has to be approved by Engineer In Charge before start of work.)The glazing subframe shall be aligned for each vertical mullion of size 50 mm x 180 mm for the entire height and for each transom of size 50 mm x 75 mm for the entire width horizontally by laser beam equipment to ensure 100% x axis and y axis alignment. To make the joint water and air tight, the glazing sub frame work is provided with approved in built ventilation and drainage system. All the joints of the structural glazing system and the periphery of glass shall be properly sealed with specified weather silicon. The details of inbuilt ventilation and drainage system should be submitted by the contractor before execution. Heavy duty, best quality EPDM gasket of approved colour of suitable profile is provided at joints and connections between.The glass is to be fixed at the outer side of the aluminium subframe with structural silicon sealant of approved make & colour (the structural silicone bite size shall not be less than 6 mm as per the structural design calculation or requirement/as per manufacturers recommendation).All screws, washers, Bolts, Nuts and Anchors used shall be only stainless steel of 316 grade etc. complete as per direction of Engineer in Charge. Curtain wall should be sealed to hoist structure and allow movements, ensure water tight and water proof etc. in its service life. Item includes cost of design, supply, installation, fixing aluminium frame with structural members, mullions, transom, sub frame, fixtures etc, including glass as specified below, cost of sealants, brackets, fasteners, screws, sleeve, spacer tape, backer rod, bolts, gasket, scaffolding, transportation etc. complete in all respect and as directed by engineer in charge for the following items. Etc. (The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experience persons shall be employed for this purpose). Glass - 6 mm thk performance Glass. High performance glass U value less than or equal to 5.6+-0.1 Watt/m2k, SF-0.47+-0.02,SC -0.54+-0.2,VLT>43%, External reflection<11%, Internal reflection<18% etc.Provide Horizontal and vertical Aluminium Capping 50 mm x 100 mm in line with tender drawings, all visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming. The non visible aluminium surfaces shall have minimum chromatizing treatment.

SH: FLOORING WORK Providing and laying Polished Granite stone flooring of approved colour, design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase Price : Rs.2627 / Sq.mtr (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase Price : Rs.1460 / Sq.mtr (Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Extra for fixing marble /granite stone, over and above corresponding basic item,in facia and drops of width upto 150 mm with epoxy resin based adhesive,including cleaning,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.(Excluding GST ).Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, over cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile600x600 mm, Purchase Price :Rs. 600 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified polished floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980,inlcuding cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1600x800 mm, Purchase Price :Rs. 1045 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and fixing fully vitrified tile skirting in risers of steps and dado up to 2 m height with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980,complete inlcuding cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1600x800 mm, Purchase Price :Rs. 1045 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified polished floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1600x800 mm, Purchase Price :Rs. 840 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and fixing fully tile skirting in risers of steps and dado up to 2 m height with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase Price :Rs. 840 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile 1200x600 mm, Purchase Price :Rs. 1163 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and fixing fully vitrified tile skirting in risers of steps and dado up to 2 m height with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase Price :Rs. 1163 Per Sqm (Excluding GST) Any deviation plus or minus in the purchase price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 58 x 250 mm, Purchase Price :Rs. 3172.4 Per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase Price :Rs. 1087 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and fixing fully vitrified tile skirting in risers of steps and dado up to 2 m height with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase Price :Rs. 1087 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 198 x198 mm, Purchase Price :Rs. 2193.65 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing & laying of machine tuffed Nylon Carpet tile (Minimum 610 GSM ) with PVC Free E-Bac backing . The carpet shall have minimum production yarn weight equivalent in range of 100% Solution Dyed Universal Nylon 6 as mentioned below. The carpet shall have sufficient gauge 1/10 Inch with sufficient stitches11 Per Inch. The carpet should carry a warranty not less than 10 years from the manufacturer and supplier of carpets. The carpet shall have the pile height ranging from 2.5mm-5.5mm (±0.5 mm) and total thickness of the carpet tile shall also range from 7.5 mm (± 0.5 mm). The carpet shall have anti-static properties as per the manufacturers specifications and as approved by the Engineer-in-charge. The Carpet shall also be Stain and Soil resistant as per the manufacturers specifications. Shampooing of carpet to be done before site is handed over. This also includes covering of carpet with plastic cover and taping of joints with masking tape,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Purchase Price : Rs. 1140 per Sq.m (Excluding GST) (Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor.The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 8 years. Only skilled and experienced persons shall be employed for this purpose.)

Providing and laying Kota stone slab of size 600x600x20mm over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand). The rate is inclusive of all operation material and required pattern ,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.The Purchase PricePrice (Excluding GST) of tile shall be as mentioned below in basic price and any deviation plus or minus in the Purchase Price will be adjusted (paid extra/deducted) at the time of billing. The work shall be carried out by an agency having good experience with the skilled labours on the specified work mentioned above. Purchase Price:Rs. 408.12 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying calibrated Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Purchase Price :Rs. 408.12 per Sqm (Excluding GST ) . Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase Price :Rs. 893.41 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price(Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm, Purchase Price :Rs. 893.41 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully Vitrified matt tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 1200x600 mm .Purchase Price : Rs.582 per Sqm(Excluding GST ).Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and fixing fully vitrified tile skirting in risers of steps and dado up to 2 m height with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile1200x600 mm . Purchase Price : Rs.582 per Sqm (Excluding GST ).Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile1200x600 mm . Purchase Price : Rs.926 per Sqm (Excluding GST ).Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying 18 mm thick Granite of any colour and shade,gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 Sq.m,including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Purchase Price :Rs. 2440 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and laying fully vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 398 x 800 mm, Purchase Price :Rs. 1356 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Extra for providing edge moulding in steps of polished Granite of approved thickness including machine polishing to edge to give a high gloss finish, triple step groove, etc. complete as per the design and as approved by the Engineer-in-Charge at all levels.

Providing and laying tacttiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid with cement based high polymer modified quickset adhesive confirming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack, abrasion and resistance confirming to British Standards 5980:1980, including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Size of Tile 300 x 300 mm, Purchase Price :Rs.1356 per Sqm (Excluding GST) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing edge moulding to 18 mm thick granite work, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge for Granite work. The above work shall be carried by an agency having sufficient experience in flooring and only skilled and experienced persones shall be employed for this purpose.

Providing and fixing Marine grade plywood flooring with 10mm EPE foam sandwitched between 18mm thick plywood boards supported on necessary MS frame work( MS Frame work will be paid seperately). The rate is inclusive of cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and laying 5mm thick tile protection sheet ( a closed cell, polymer based micro cellular foam, reinfirced with high performance polymerson finished) vitrified tile/ engineered stone/ Laminated wooden / vinyl and other flooring for protection and removal of the same after completion of all other works, including cost and conveyance of all materials, labour charges, lead, lift, curing , till handover etc, complete as directed by Engineer in charge at all levels

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry,cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. but excluding the cost of nosing of steps etc. complete.

Providing and laying 20mm or nearest (+/-1mm) thick kiln seasoned & treated original North American Maple wood( second grade Northern hard maple, grade marked and stamped as produced by MFMA member manufacturer) flooring with planks of width 57 to 83mm in required design and patterns, laid over chemically treated (anti-termite) pine wood sleepers of minimum size 30mm thick x 60mm width installed 30 to 35cm centre to centre, which rest on 10mm thick professional EPDM rubber pad/ air cushion pads on damp free & levelled concrete floor over 6 mil(150 micron) thick polyethylene sheet. The flooring to be machine sanded in uniform level and finished with primer and polish Bona or equivalent and two coat game line markings including providing necessary fittings such as staples, cleats of required size, nails, adhesives etc complete as per the direction of Engineer-in-Charge. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Supply and Installation of European Origin, FIBA Certified, Point Elastic polyurethane Flooring having thickness of 9.0mm comprising of 7mm Prefabricated SBR Mat followed by 2mm PU Coatings. Seamless, non-porous, and smooth surface for Very good resiliency for comfort, injury prevention, Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. System consists of SBR Matt being laid using two component PU Adhesive followed by Sealer to fill in all the pores of SBR mat, 2 coats of PU Resin Layer followed by Top PU Coat and game line marking. Product should meet European standards EN- 14904 - P1 category, Shock Absorption: 26% as per EN 14808, Vertical Deformation: 0.9mm as per EN 14809, Friction value according to EN 13036-4 should be on or above 98, Ball Bounce: 99% according to EN 12235, Gloss: 5% as per EN 2813, Resistance to Rolling Load: ≥ 1500 N as per EN 1569, Resistance to impact: ≥ 800 gr @ 10°C & ≥ 1200 gr @ 23°C as per EN 1517, Resistance to indentation: 0,37 mm @ 5 min & 0,17 mm @ 24 hrs as per EN 1516, Resistance to wear: < 150 mg as per EN ISO 5470, Flammability: Bfl-S1 as per EN 13501- 1, Improvement impact sound insulation (ΔLw): 20dB according to ISO 717-2, V.O.C. content – adhesive/resins Solvent free, Resin composition Free of solvents and heavy metals, Elongation at break: structure 150 % as per DIN 53455, Tensile strength: structure 8 N/mm² according to DIN 53455, Tear strength: structure 25 N/mm according to DIN 53515. Consumption of materials has been as per standards which is 0.90Kg/sqm Adhesive for SBR Matt, 0.5Kg/sqm Sealer, 2.8Kg/sqm PU Wear Coating followed by 0.14Kgsqm Top PU Colour Coat mixed with Spheriglass. Product should be manufactured under ISO 9001 for quality management, ISO 14001 for environmental care and ISO 26000 for corporate sustainability. All the works to be carried out as per approved drawing & instruction by engineer in charge.Rate includes cost and conveyance of all materials, labour charges, lead, lift, scaffolding, sundries etc complete at all levels. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

SH : CEILING WORKS & PARTITIONS Providing and fixing Gypsum false ceiling (12.5 mm) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sq.m (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings,trap doors,grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and fixing 12.5 mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sq.m (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks).The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Tegular 15 BE Edge Tiles of 17mm thick and 15mm face exposed grid. The tiles shall have pin hole visual with Humidity Resistance (RH) of 99%, NRC 0.0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 30db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 17mm Tegular 15 BE edge and 8mm drop in module size of 600 x 600mm (nominal). The tile shall be laid on with 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill. The Tile & Grid system used together shall carry a 30 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate. The ceiling system to be suspended from slab / structural frame work using GI slotted cleats fixed to ceiling with expansion bolt/metal rawl plug, 4mm GI rods with galvanized spring steel level clips spaced at 1200mm centre along main T bottom all complete at all heights as per specifications as directed by the Engineer-in-Charge. The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

Providing and Fixing Suspended Metal Perforated Ceilings in Hook-on system (R-H 200) with Rectangular panels made out of 0.6 mm thick GI in width ranging from 500mm, length ranging from 1800 mm to 2400mm.RH200 Ceiling The R-H 200 rectangular Hook-On panels to be made of Galvanized Iron (GI), minimum thickness 0.6mm, 120gsm hot dipped galvanization (both sides), and recycled content of 25%. The panel surface to be powder coated (post coat) to 60-80µ on visible side after mechanical production, low gloss (degree of gloss approx. 20%). Scrubbable, architectural-quality, electrostatically applied polyester powder coat paint applied to entire panel after forming (post coat). The color to be approved Wood Grain finish (Pure Polyesterr) . The panels to be random perforation having 2.5mm dia. round holes square 90° perforations, 16% open area with border / without border.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. The panel should be formed with square/beveled edges decided as per the site mock up and instructions of Engineer-in-Charge. Suitable type edge trims should be used where ever ceiling ends near wall and as approved by Engineer-in-Charge. Screws with rawal plugs should be used to fix edge trims. Ceiling termination, edge trim, perimeter channel etc shall be as approved by Engineer-in-Charge. The ceiling height shall be as per drawing. The suspension system consisting of carrier, hanger, threaded rod, perimeter profile/ edge trim, security clips etc. shall be provided in accordance with approved Manufacturer's standard specification and directions of Engineer-in-Charge. The rate shall also include the cost of making openings of any shape and fixing light fittings, grills, diffusers, smoke extractor fan openings, Air terminal devices for HVAC, cut-outs etc. made with frame of perimeter channel/ Angle including wall trim/edge trim and infinity profiles of required width wherever it is necessary to create perimeter enclosures, interface carrier for other materials as per drawing and finishing the edges as directed by Engineer-in-Charge. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of metallic false ceiling, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, National Building Code and DIN ISO 9001, LEED & DGNB, EN 13964, EN 13501-1 building material class A2-s1, do Class A tested to ASTM E 84 class 0 tested to BS 476 part 6/7, E DIN EN ISO 354, ASTM C 423 etc to the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing and fixing Aluminium Baffle Ceiling manufactured of approved colour consisting of U-Shaped Profiles 25mm wide x 100mm deep x 0.6mm thick Aluminium Alloy 3105 with inwardly returned edges of 6 -9mm. The baffle shall be manufactured on high speed, high precision roll forming machine with Hi configuration roller levelling process to ensure the flatness and to avoid the failure of metal at corners which may occur normally on press brake machine. Panels to be pre-treated inhouse with latest nano technology process and electro statically powder coated with automatic Carona system and cured with gas catalytic technology for good bonding and high coating strength. Baffles are fixed to the GI Slotted angle Carrier of size 30x30x2mm thick powder coated to black colour with Outer and Inner bracket & Distance between 2 baffles shall be 150mm C/c. Slotted angle shall be fixed at a distance of 1.2mtrs to 1.5mtrs c/c and shall be suspended by means of G.I. Threaded Rod of 6mm diameter at a distance of 1.2mtr to 1.5mtrs c/c. The rate shall include cost, conveyance,lead, lift of all materials, labour, scaffolding charges, painting etc. complete as per drawings, specifications and direction of Engineer-incharge. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for proper installation, material composition & quality performance of both ceiling panels and supporting system for a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters.The structural steel work required for this work will be paid in the respective item seperately. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, National Building Code and DIN ISO 9001, LEED & DGNB, EN 13964, EN 13501-1 building material class A2-s1, do Class A tested to ASTM E 84 class 0 tested to BS 476 part 6/7, E DIN EN ISO 354, ASTM C 423 etc to the Engineer-in-Charge. Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Design, Supply,Installation, Fixing and Testing 4mm wood finish aluminium composite ceiling of approved make and colour including necessary aluminium framework.The aluminium composite panel should consist of total thickness with top and bottom coil of 0.5mm thick AA3003 Alloy grade with temper H44 and the top aluminum coil should be coated with fluoro-polymeric resin PVDF / FEVE from Kynar 500/Lumiflon as per approved colour and shade, with Humidity test for 4000 hrs As per ASTM D-2247.The core should be mineral core with minimum 70% inorganic matter passing reaction to fire EN13501-1 Class B S1 D0; also confirming as per BS 476 part 6 &7 and 3Hrs Fire rating as per ASTM E 119. Frame work - 50 x 25 x 1.5mm aluminium box section, 25 x 25 x1.5 mm angle, 6 x 19mm, 40 x 6mm nickel plated screws. Suspended from the roof area and frame covered with confirmed ACP with Tile format. Manufacturer must have valid process certification by any recognized third-party agency for testing and the supply must strictly be made from the unit mentioned in the FPC Certificate. Sound transmission loss (Acoustic Properties should be 27-30DB as per ISO: 354 ISO-10140(part- 2). Coating shall be protected by 80micron Surface protection film to prevent scratches during fabrication and installation. If stain or any damage noticed after peel off, such panel should be replaced with new one of the same shade and colour, at no extra cost. The rear aluminum skin shall be a wash coated or a basic Polyester coated surface with complete product identification printed on it along with date & time of manufacturing and batch details. Traywork has to be adopted for fixing of ACP panels wherein each panel is routed and bend on all four sides / sides needed as per site requirement over a subframe which is in turn fixed to the mainframe, using mechanical fasteners.The work shall be done in accordance with the approved shop drawings, fixed to ceiling, sides and faces of columns/piers, roofing to RC C/structural steel system,etc, to line and level. The tray work joints shall be sealed/capped with aluminium metal strips clipped, fixed over aluminium frame using mechanical fasteners/silicon sealant.The hairline joints may be sealed using 3M adhesive and structural sealant. The rate is inclusive of cost & conveyance of all materials, labour, scaffolding, lead, lift etc.complete at all levels as per specifications & as directed by Engineer-in-charge. ( The measurement for structural framework shall be paid under the relevant item ) . Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing and fixing 10.5 cm thick Gypsum Board Partition of approved make as per design. 48mm C stud of approved make (0.5mm thick having one flange of 34mm and another flange of 36mm made of GI Steel) placed at 610mm centre to centre in 50mm floor and ceiling channel (0.5mm thick have equal flanges of 32mm made of GI steel), which is anchored to the floor & true ceiling using suitable anchor fasteners. The boards are to be fixed to the framework with joints staggered to avoid leakage through joints. The fixing channel of 50mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal joints of the outer layer of boards screw fixed to the studs using metal to metal flat head screws. Also to have an additional 19mm thick ply supports (wherever required) as spacer at the false ceiling level and as sub frames for doors and glazed openings as per details or as per Engineer in charge instruction.The partition should be from Finished flooring level till false ceiling level. As an acoustic requirement, 25mm glass wool of density 20kg/m³ to be affixed as indicated in the drawing. The framework to be cladded with inner layer of 12.5mm plain board (IS-2095 Part 1:2011) and outer layer with15mm Gypsum board fixed on either sides of the frame with Drywall screws of 35mm at 300mm C/c and 150mm C/c at periphery of wall.The board to be fixed vertically to the frame work with joins staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper tape as per recommended practices of the manufacturer. Nogging channel is to be fixed using metal to metal flat head screws at the horizontal joints of the board. The Junction of the partition with masonry and all penetration through the partition has to be treated with fire and acoustic sealant of Hilti / 3M or any other approved brand. The junction between partition & ceiling to be provided with 12mm x 12mm shadow channel as per details. To have 12mm ply backing to fix skirting as per details, Contractor to make provision for all electrical/networking boxes and to provide cut-outs as required. Electrical/Network boxes /other services to be provided at desired height and location as indicated in the drawing. All junctions between materials, columns, walls, etc to have necessary groove with Aluminium `L' angle as per details. All exposed edges / corners/ grooves to have proprietary corner / edge bead sections/channels as per direction of Engineer in charge. All exposed gypsum board edges to be fixed with self-adhesive. At all locations where services are penetrating the partition above false ceiling to have MS frame work around the duct / cable tray / pipe and the gaps between the frame work and service to be filled with appropriate acoustic sealant / fire stop material as directed (As per acoustic consultants). The rate for MS frame work and 19mm thick plywood backing shall be measured in relevant items. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.Work shall be executed by standard specification and as per the direction of the Engineer-in-Charge. (The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Finishing Squash Court Walls with WSF approved Hard plaster system consisting of cement-based plaster as per manufacturers specification. The plaster is of one layer 12mm thick and assumes a level brick wall with rough plaster. The front wall bears the maximum impact is under laid with chicken mesh of approved mesh size and make and finally coated with a epoxy based cement putty. This ensures a crack free, hard, smooth and even playing surface which is resistant to breakage, flaking and cracks. The walls are finished with one coat of primer and two coats of high quality washable oil based acrylic paint . Marking lines to be painted in red color with paint.The rate is including cost and conveyance of all materials,chicken mesh,painting, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Only skilled and experienced persons shall be employed for this purpose and should ensure a guarantee for installation for a period of 6 years from the date of completion of the said work.

Providing & Fixing horizontal level suspended ceiling comprising of Galvanized steel Lay-in Plain metal ceiling consisting of 600x600mm (Nominal Size) 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5 mm thickness as per IS:513 (1994) in approved color with Square Tegular/Microlook 90˚ edge having 8mm drop and 5.5mm flange. The difference between the 2 diagonal dimensions of the tile to be less than 1mm. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523. The tile shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98 and Fire Performance of Class 0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm..The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile colour) having double stroke rotary stitching on all T sections i.e. the Main Runner at a spacing of 1200 mm & Cross Tees at a spacing of 600 mm with a web height of 32mm (all sections). The deflection loading of the system shall be 7.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 8.5kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel 90 gsm and pre-painted steel with baked polyester paint of 0T bending capability. Suspension System consist of accessories manufactured and supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs connected to RC C Slab /structural steel system. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of metallic false ceiling, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, National Building Code and DIN ISO 9001, LEED & DGNB, EN 13964, EN 13501-1 building material class A2-s1, do Class A tested to ASTM E 84 class 0 tested to BS 476 part 6/7, E DIN EN ISO 354, ASTM C 423 etc to the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing and fixing 1 layer magnesite bonded wood wool acoustic panel of approved make. 1mm thick fibre, exquisite surface structure, building biology recommended, size 600 x 1200 x 25mm, having edge detail SK-04, weight 11.30Kg/Sq.m, fire protection class B-s1,d0 as per EN 13501-1 & Humidity Resistance of 95%. Thickness Tolerance T2 (± 1 mm) according to EN 13168. Ceiling Installation : The wood wool panels to be laid in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 90 gsm/Sq.m) consisting of Main "Tee", size 24W x 38H x 3600L mm made from 0.30 mm thick sheet spaced at 600mm centre to centre and Cross "Tee", size 24W x 38H x 600L mm made of 0.30 mm thick sheet to be interlocked between the main T runners at the distance of 1200mm centre to centre to create 1200x600mm module to lay ceiling tiles of approved surface pattern in the grid including, wherever required, cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. The perimeter trims to be of 24W x 24H x 3600L mm and 0.30 mm thick. Main "Tees" to be suspended from ceiling using M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs suspended from the RCC Slab/ structural steel system. Adj ustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The first suspension from the perimeter trim should not exceed 300mm. The bottom exposed width of 24mm of all T-sections shall be factory pre-painted with polyester paint. Wall Installation: UD profile of width 28mm and 0.60mm thick is fixed to the wall, such that the base of the UD profile is 25mm above the planned finished ceiling level / 25mm less than the finished wall level. The ends of the CD profile is to be inserted into the UD profile and placed at a distance of 600mm centre to centre and is to be secured to the soffit/wall using the Universal Bracket. The Universal brackets are to be fixed to the soffit/wall at a distance of 900mm using 6mm dia anchor fasteners (for ceilings) and wall screws (for walls). Wood wool boards to be screw fixed to the CD profile using 6 screws (per board) 50/4.50mm dia screws. The wood wool board should be backed by 40mm thick glass wool slabs packed in 1200 x 600mm polythene bags having a gross density of 50kg/m3. The finished face of wood wool panels have to be installed at a distance of 300mm from the soffit to achieve a NRC of 0.90 as per ASTM C423. Panels can be spray painted on site (before installation) under supervision of manufacturer. The wood wool board should be backed by 40mm thick rock wool slabs packed in 600 x 600 polythene bags having a gross density of 50kg/m3. The finished face of wood wool panels have to be installed at a distance of 300mm from the soffit to achieve a NRC of 0.90 as per ASTM C423. Panels to be spray painted on site under supervision of manufacturer.The rate is including spray painting , cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, National Building Code and DIN ISO 9001, LEED & DGNB, EN 13964, EN 13501-1 building material class A2-s1, do Class A tested to ASTM E 84 class 0 tested to BS 476 part 6/7, E DIN EN ISO 354, ASTM C 423 etc to the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing & Fixing Wooden finished Suspended Ceiling System with Microlook edge tiles and edge profile in exposed grid. The 18mm thick Plain Tile shall be made of Medium Density Fibre of density 700+ Kgs/m3. The tile shall have melamine laminate finish of approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) on visible side and backing laminate (same shade) on the reverse with 0.8mm matching PVC edge banding in module size of 600mm x 600mm. The edges of the tile shall be Square Tegular/Microlook 90˚ having 8mm drop using 3mm thick compact board spline. The tile shall have Humidity Resistance (RH) of 70%, with sag limited to 1/300mm. The tile shall have a Fire Performance of class 1 according to BS 476 part 7. The tile shall be laid on 15 mm wide T - section flanges having double stroke rotary stitching on all T - sections i.e. the Main Runner at a spacing of 1200 mm and cross tee at a spacing of 600 mm with a web height of 38 or 43mm (all sections) as per manufacturers reccomendation. The deflection loading of the system shall be 12.5-15.6 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360 within suspension points) with deflection loading of 15.5 - 18.6kg/m2. The end details of the main beam and cross tee shall be made of pre hardened steel clip fixed to the ends. The cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Suspension System consist of accessories manufactured and supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs connected to the RCC Slab /structural steel system. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of metallic false ceiling, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes etc as per the direction of the Engineer-in-Charge. Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing and fixing Acoustic wall panels with Suitable colour pattern as per the approved drawing, 2400X1220X9mm or approved as per manufactures specification, Thickness Tolerance T2 (± 1 mm) according to EN 13168. Edges shall be straight cut. The Acoustic panels shall be fixed to the existing 8/9mm ply panelling using SR-998/arobond or equivalent adhesive Raw material shall be Recycled PET bottles The finished face of panels have NRC of 0.70 as per ASTM C423. The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary. The Samples of the panel shall be submitted to the Engineer-in charge for approval The purchase price (excluding GST) of acoustic panel shall be taken as Rs- 1200/sqm and any deviation plus or minus in the purchase price(excluding GST) will be adjusted(paid extra or deducted) in the payment making to contractor) The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years Only skilled and experienced persons shall be employed for this purpose.

Providing and Fixing Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side including Installing Skirting for Channelled wall panel of width 50mm or more as required by the Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour for the wall Panel. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 21mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. Wall Area Installation : The panel shall be mounted by tongue and groove mechanism using inside clip on aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Ceiling Installation : The panel shall be downwardly installed with tongue and groove mechanism using Inside clip on Prelude 43 with 24 mm wide T - section flanges having rotary stitching on all T - sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel and the cross tee is designed to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The grid shall be installed with suspension system of approved make. SUSPENSION SYSTEM consist of accessories manufactured and supplied by approved manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs from the RCC slab / Structural ceiling. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling, wall cladding, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, etc as directed by the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 1 year from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing and Fixing Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side including Installing Skirting for Channelled wall panel of width 50mm or more as required by the Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour for the wall Panel. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 21mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual Wall Area Installation : The panel shall be mounted by tongue and groove mechanism using inside clip on aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Ceiling Installation : The panel shall be downwardly installed with tongue and groove mechanism using Inside clip on Prelude 43 with 24 mm wide T - section flanges having rotary stitching on all T - sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel and the cross tee is designed to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The grid shall be installed with suspension system of approved make. SUSPENSION SYSTEM consist of accessories manufactured and supplied by approved manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs from the RCC slab / Structural ceiling. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling, wall cladding, structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, etc as directed by the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 1 year from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area. Keel frame work will be paid in relevant item.

Supply and fixing of Exterior PVC Ceiling of panel sizes of 250mmx 2950mm or nearest, durable and resistant to moisture, water and borer-fungus-termite attack complies with IS 875 part 3 1987 on wind loading, the same should be tested for and complying to a wind Ibad resistance of minimum 1.2 kpa (as tested by an independent and competent authority) as per prevalent and in practice wind loading norms and procedures. Panels to be installed with Aluminium sections of suitable gauge as per the installation of planks & size according to site conditions . Panels with suitable trims for edge profiles, Connecting profiles, starter and ventilation profile, interior and exterior corner profiles shall be used . Panels must be maintenance free , rust proof and are 100% Water proof. 10 years warranty for colour & finish of the panels.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, etc as directed by the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

Providing & Fixing Of Perimeter Trim for channeled perforated panels in walls with 19mm face for perimeter solution using appropriate accessories made of extruded aluminum of dimension 19.3 x 100 x 3000mm. The inverted F- Shape section provides 2 flanges and 19mm face for resting of tile, must be powder coated of approved colour. Profile to have engineered design for fitment of Tee bar connector, Splice plate Corner connector & hanger clips. The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing & Fixing of Perimeter Trim for channeled perforated panels in ceiling with 152mm face for perimeter solution using appropriate Accessories made of extruded aluminum of dimension 152 x 64 x 3000mm. The L- Shape section provides a visible face of 152mm from the bottom, must be powder coated of approved colour. Profile to have engineered design for fitment of Tee bar connector, Splice plate Corner connector & hanger clips.Alignment plate are to be used for aligning the face of the knife edge axiom. The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing & Fixing of aluminium extruded keel frame work made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel framework shall be fixed over the structure using self-tapping screws spaced every 50cm. Finally, fix woodworks panels onto the Keel using clamping accessories.The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Supply & fixing of Suspended Aluminum sections of 50x75mm and 0.5mm thick powder coated with wood finish with U shaped profiles in varying grid dimensions as per drawing detail. The section is suspended from RCC Slab / Structural system with plywood backing supported on aluminium sections / structural frame work. Aluminium section , Structural frame work, and Plywood shall be measured under relevant items. Powder coated aluminium section to be fixed to plywood backing using anchor fastners each at anchorage ends.and all required accessoriers at all levels & all heights of building all complete as per the 3D views and architectural drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 10 years from the date of completion of said work.

SH : ROOFING Providing and laying pressed clay tiles including top ridges and end ridges (as per approved pattern 20 mm nominal thickness of approved size) on rough surface of roof laid over concrete battens . Concrete battens are made up of cement mortar 1:4 (1 cement : 4 coarse sand)of size 100x75mm thick are laid at intervals @380mm c/c.Battens require 3-5 days curing .Tiles are fixed on battens using the legs provided in the tiles, finished and completed as per the approved architectural drawing.The rate shall include cost and conveyance of all materials including end and top ridges, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and fixing single skin system with Insulation made of 0.45mm BMT (0.50mm TCT excluding paint), Steel Grade of G550 (min 550 yield strength ), 1000-1015mm effective cover width with five major corrugations, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg of approved make. The base steel sheet shall be coated with zinc-aluminium alloy Zincalume (i.e. 55% Al, 43.4% Zinc, 1.6% Si), class AZ150- minimum of 150 g/m² coating total on both sides, pre-painted with (Paint system - Resin and pigments used) exterior quality XRW paint system of Super Durable Polyester resin with stable inorganic pigment with no lead contents for colour durability, high solar reflectance Index (SRI) - Thermatech technology for cool comfort, of Colorbond XRW steel or equivalent shall conforms to general requirement of IS 15965 class 3/ AS/NZS 2728 type 4 durability value of approved make. The sheet shall be free from defects and brand marking of the manufacturer giving product details on the back of the sheet at regular intervals confirming genuinity of the material. The steel sheet shall be fastened with minimum 25µm mechanically plated zinc-tin alloy coated, hex head, self-drilling screw, with EPDM washer of approved make conforms to AS 3566. Glass wool of 50mm (insulation specification) thick, density 24kg/m3 as per design requirement complying with IS 8183 BS-3958 Part-5, ASTM C592-80 approved by engineer in-charge shall be laid uniformed over vapour barrier Installed over GI welded wire mesh of 12 Gauge, Mesh size of 2 inchs and tensile strength ranging from 300 - 450 N / mm2.The sheets shall be separated with #Z# shaped sub girts of 50 x 50 x 50mm size made out of 1.6mm thick galvanized steel sheets. The sub girts shall be fixed on the purlin and shall be used for supporting the top sheet.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and fixing ridge/ valley capping/flashing in required width (upto maximum 600 mm) with plain galvalume colour coated sheet made out of 0.50mm TCT, minimum 300 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms /sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all mat erials, scaffolding, lead, lift, labour charges etc. complete at all levels as directed by Engineer-in-Charge

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete for Gutter (600 mm over all girth) including cost and conveyance of all mat erials, scaffolding, lead, lift, labour charges etc. complete at all levels as directed by Engineer-in-Charge

Supply & fixing of Double Skin metal Roofing with insulation consisting of profiled colour of pre-painted Zincalume trapezoidal sheets shall be made of 0.45mm BMT (0.50mm TCT excluding paint) 1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg of approved make. The steel sheet is having high tensile sheet G550 strength metallic coated with Zinc Aluminium alloy (i.e. 55% Al, 43.4% Zinc, 1.6% Si - Zincalume), AZ150 (min 150 gm/m2 total on both side), pre-painted with Super Durable Polyester (SDP) XRW quality paint with stable inorganic pigment and Infrared Pigments with no lead contents for colour durability (High SRI-”Thermatech technology”). The steel sheet shall have total paint coating thickness of 35microns as 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces of approved color. The exposed paint system shall have stable inorganic pigments for better color performance conforming to AS/NZS 2728 type-4 / IS15965 class 3 for the durability of approved make.The bottom Liner sheet shall be fixed directly to the purlin as liner sheet using galvanized imported self drilling and self tapping fasteners with EPDM washers.The Rockwool insulation shall be 50 mm thick, 48 kg/m3 flexible or as per design requirement complying with IS 8183,BS - 3958 Part-5 ASTM C592-80. The insulation shall be supplied in the form of rolls. The steel sheet shall be fastened with 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.T he sheets shall be separated with #Z# shaped sub girts of 50 x 50 x 50mm size made out of 1.6mm thick galvanized steel sheets. The sub girts shall be fixed on the bottom sheet and shall be used for supporting the external sheet (top sheet).The profile sheet, fastener size etc. shall be approved by the Engineer in charge. All the accessories like flashing and capping shall be made from the same material (or manufacturer’s recommendation) which is used for main cladding application and shall be measured under relevant item. The measurement shall be based on finished/covered surface area. The rate shall include cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and fixing structural decking panel of approved make of 960 mm effective cover width profile with 51 mm deep ribs, pitch of 316 mm centre-to-centre, with 3mm deep and 19 mm long embossment on either side of webs which are diagonally opposite to each other, the top embossment on is 1.5mm deep and 15.21mm wide providing the mechanical interlocking between the steel and concrete ensuring adequate composite action between steel and concrete. The panel shall have v” shape of 10mm deep on rib and pan as a stiffener and male and female interlocking at side lap. The feed material shall be 1.2mm Base Metal Thickness (i.e. excluding coating thickness) with zinc coating of Z275 (275g/m2 minimum coating mass), 550 MPa Yield strength grade confirming to IS513 or ASTM A653M. The required accessories (edge forms /flashing) shall be made of same material of decking panel. Shear studs of approved make shall be used with metal decking with steel beam structure or as per manufacture recommendation. The deck sheets shall be supplied in required sizes according to the cutting schedule.Cutting of sheets to length shall not be permitted at site.Cutting and trimming of small openings which were not finalized at the time of working drawings can be allowed at site. Power tools shall be used for cutting. No gas cutting shall be done on the sheet. Before installing decking sheet, it shall be ensured that the beam support is in true planes, correctly placed and securely fixed. The work shall be executed as per manufacturers specifications by a specialised agency having sufficient experience in similar work and should ensure a warranty for any defective installation, material for a period of 5 years from the date of completion of said work.

SH : FINISHING WORKS 6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge.

12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Providing control joints in 6mm Width X 10 mm depth at 3M X 4M panels. along the length and breadth of the entire screed area. The joint can be provided by using a saw cutting machine attached with a 3 mm blade within 18-24 hrs of application of the screed. 28- 30 days later, these joints can be filled with one-part moisture-curing Polyurethane Sealant.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two or more coats to acheive an even coat.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sq.m over and including priming coat of exterior primer applied @ 2.20 kg/10 Sq.m).The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Providing and applying protective coating on external steel structures two coats of aliphatic polyurethene of 35 microns each per coat with not less than 45% volume solids and DFT of 35 micron each over a base coat of fast drying, high solids two pack epoxy coating not less than 80% volume solids of DFT 130 microns with primer coat of two pack epoxy not less than 71% volume solids and a DFT of 50microns or equivalent.All steel surface to be cleaned throughly withstrong detergents and high pressure fresh water to remove oil, grease, salt and contaminations.All areas to be blast cleaned to Sa2.5(ISO8501-1:2007) before applying primer . The rate shall including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineering- Charge at all levels.

Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 Sq.m) over and including priming coat of exterior primer applied @ 2.20kg/10 Sq.m.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

SH: WATERPROOFING AND MISCELLANEOUS WORK Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/Sq.m mixed with water proofing cement compound @ 0.253 kg/ Sq.m. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/Sq.m mixed with water proofing cement compound @ 0.126 kg/Sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.,leakage testing by ponding etc complete.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and applying waterproofing treatment in roof with a 3mm thick polymer-modified Bituminous membrane of Approved make. Atactic Poly-Propylene (APP) based with UV resistant, ground chemical resistant, high melting points, flexible and elastic with high adhesive strength. The membrane shall be reinforced with nonwoven polyester reinforcement of a minimum of 160 gm/Sq.m including carving the corner by torch welding over the primer with the overlap of 100 mm and appropriately pressing the membrane to remove any entrapped air. The termination of the membrane at 30 cm above the vertical wall.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing ,supplying and applying Chemical crystalline of approved make for waterproofing of water tank.The chemical should be mixed with mortar made of fine aggregate and cement on the concrete floor/Surface. Precautions should be taken such that there is no water or wetness seen on the slab while applying the mix. The mix has to be applied on the wall and the water tank has to be left to curing for a minimum of 24 hrs without any activities. After curing, water has to be filled in for observation for a minimum of 24 hrs to assure a leak proof finish as per the manufacturer specification including cost and conveyance of all material to site, lead, lift, and hire charges for scaffolding, labour charges etc. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the under ground and overhead water tanks,sewage collection tanks, roof slabs etc., prepared by mixing in the ratio of 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on the negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm.For horizontal surface one coats @1.10 kg per Sqm. The work shall be carried out all complete as per specification. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The product performance shall carry a guarantee for 10 years against any leakage. (The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the under ground and overhead water tanks,sewage collection tanks, roof slab etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and applying the same from the negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-2,12-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification.For vertical surface two coats @0.70 kg per sqm. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The product performance shall carry a guarantee for 10 years against any leakage.(The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Providing and laying PVC membrane waterproofing system over the vertical side for retaining wall Installing geotextile of 300gsm as correction layer, over the vertical side of the over head & underground water tank ,sewage collection tanks etc. before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300percentage) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging dueto self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. (The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years). Only skilled and experienced persons shall be employed for this purpose. Only external surface area of retaining wall will be measured.

Providing and laying PVC membrane waterproofing system in horizontal plane of the over head & underground water tank ,sewage collection tanks etc. including adjustment layer to take up any surface irregularities of the substrate, in order to avoid any imperfections or foreign particles damaging the waterproof layer. It shalll composed of geotextile, the weight of 300 g/m2, laid in dry conditions with edge overlap of 10/15 cm. Synthetic membrane of plasticized PVC, 2mm thick of approved manufacturer shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent. Double seam welding of PVC waterproofing membrane joints shall be pressure tested to 2 bars of 10 minutes .The waterproofing project to be divided into sectors if required and it is composed of shaped joints of PVC and it is welded to the existing waterproof liner. The rate shall be inclusive of providing and laying protection layer of non-woven 300gsm geo-textile membrane over the laid PVC waterproof membrane system, followed by a cement mortar screed of 50mm thick over the top layer of geo-textile membrane to facilitate the placing and tying of reinforcement bars of raft and all pressure release mechanism etc complete as directed by the Engineer-In-Charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. (The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years). Only skilled and experienced persons shall be employed for this purpose.The 50mm thick cement mortar shall be measured seperately. Plan area only to be measured for the payment.

Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing rebar.Embedment depth as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The approved chemical shall be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) For fixing 8mm Dia bar with a hole dia of 10-12 mm. (Excluding the cost of reinforcement )

Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing rebar.Embedment depth as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The approved chemical shall be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) For fixing 10mm Dia bar with a hole dia of 12- 14 mm. (Excluding the cost of reinforcement )

Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing rebar.Embedment depth as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The approved chemical shall be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) For fixing 12 mm Dia bar with a hole dia of 14-16 mm. (Excluding the cost of reinforcement )

Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing rebar.Embedment depth as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The approved chemical shall be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) For fixing 16mm Dia bar with a hole dia of 20mm. (Excluding the cost of reinforcement )

Providing and supplying heavy duty injection adhesive for rebar / anchor rod fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing rebar.Embedment depth as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corrosion tested. The approved chemical shall be installed in hammer drill, diamond coring holes , including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)For fixing 20mm Dia rebar / anchor rod with a hole dia of 25mm. (Excluding the cost of reinforcement/ anchor rod )

Providing and fixing high-performance galvanized steel M20 anchor rod of 300 mm lenght, 5.8 grade strength of approved make including cost and conveyance of all materials, labour charges, lead, lift, etc complete as directed by Engineer-in-Charge at all levels.(The above work shall be carried out by an agency having sufficient experience.

Providing and fixing G. I round holding down bolts with nuts and washer plate including two coats of approved make and colour synthetic enamel paint over two coats of approved make yellow zinc chromate primer, including cost and conveyance of all materials, labour charges, lead, lift, etc complete as directed by Engineer-in-Charge at all levels.

Providing and fixing in position medium duty FRP manhole cover and frame of size 60 cm x 60 cm and class B-125 of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places as per the design and drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.

Providing and fixing in position medium duty FRP manhole cover and frame of size 90 cm x 80 cm and class B-125 of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places as per the design and drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.

Providing and fixing in position heavy duty FRP manhole cover and frame of size 60 cm x 60 cm and class C-250 of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places as per the design and drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.

Providing and fixing in position heavy duty FRP manhole cover and frame of size 90 cm x 80 cm and class C-250 of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places as per the design and drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.

Providing and fixing in position heavy duty FRP manhole cover and frame of size 120 cm x 90 cm and class C-250 of required shape and approved quality for inspection chamber / manhole / gulley trap / and other required places as per the design and drawings. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.

Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing & fixing self adhesive tarfelt sheet minimum 3mm thickness in single layer over corrugated metal roofing sheets. Bitumen Felt to be laid over existing metal sheet or any other place as directed as per existing details. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

SH: INTERIOR WORKS Providing and fixing 20mm thick stone cladding of approved,quality and material over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase Price : Rs. 1484 Per Sqm (Excluding GST ) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor

Providing and fixing 20mm thick laterite stone cladding of approved,quality and material over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase Price :Rs.1130 per Sqm (Excluding GST ) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor

Providing and fixing wall panelling with 6mm thick Exterior Grade HPL Sheet of approved make in wood grain shade over framing work with Aluminium sections as per approved drawing including cutting sheet to required size panels,all necessary rivets, self screws, self bolts,anchor fasteners,Al profiles,finishing of joints with suitable sealents etc all complete as per the dirextion of Engineer-In-Charge. 10 Year warranty must be provided for the material and workmanship.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Providing and fixing Wash counter unit made of 17mm multiwood for boxing and shutter works finished with 1 mm l laminate for shutters and outer surfaces , inside to be lined with 0.8mm liner laminate .Top to be laid with granite 20mm thick, edges to be champhered. All neccessary hardwares and accessories like Soft close hinges, handles and other fittings should be provided as per the design and drawings.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Purchase Price (Excluding GST ) for 1mm laminate :Rs.470 per Sqm , 0.8mm laminate : Rs. 303 per Sqm Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor

Providing & fixing 9 mm thick BWP grade ply confirming to IS- 710 on existing Aluminum frame work for column , wall cladding etc using approved size screws at every 600 mm center to center at all levels as per drawing.The ply shall be fixed in correct line and level as per drawing. The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.

Design,supplying and fixing in position Fluted /Louvers panels as per drawing. The core of the fulted/Louver panels shall be PVC composite material and the finish shall be of wooden finish . Each panel shall be of size 3060X230mm and the thickness of the panel shall be 1.20mm.Panel shall be fixed to plywood backing .(The cost of the plywood backing shall be paid seperately). Exposed edges of the Fluted /Louvers panels shall be protected with corner/Edge/T trim of matching shade. The cost shall be inclusive of all material,acessories, fixing screws, conveyance, lead , lift, etc complete at all levels as directed by Engineer in charge.The Purchase Price ( Excluding GST) of panel to be considered as Rs 1453/sqm any deviation plus or minus in the Purchase Price( Excluding GST) in approved shade will be adjusted while making payment to the contractor.Dismantling ,Removing,Leading to allocated locations,Refixing of Existing Collars of Air terminal devices including Air distribution System as per the instructions of Engineer in charge shall be in the scope of works.The contractor shall making the cut outs for HVAC grills/diffusers/service access doors, electrical/fire fighting/CCTV appliances etc wherever necessary.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years .Only skilled and experienced persons shall be employed for this purpose.

Providing and fixing Vinyl graphics including 3M printable self adhesive vinyl, with Latex print over 2mm pvc foam board fixing directly on the wall. The graphics/design shall be approved by the Engineer in charge prior to the printing.Rate to be inclusive all necessary hardwares, Screw etc all complete as per the Architectural drawings, as specified and as directed.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.)

Supply Main/Sheer curtain and sttitch it as pleated style , install it in a Heavy Duty M track(Brand-Slide Impex) with side cap,Noice less wheel Runner,First Quality PVC pull batten.(The purchase price of material - Rs. 400 / Mtr ).The rate is inclusive of cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor

Providing and fixing Badminton pole and nets in international standards including all material and labour for fixing 1.55 m high uprights made from 40mm dia and 5mm thick steel with polyster powder coating. The net (Garware / Equ make ) shall made of 3mm HDPE twine to ensure better knot stability and specially treated to provide resistance to UV degradation ensuring high durability.The post should be BWF Approved material. All the works has to be carried out by certified sports area manufactures as per the approved design and direction of Engineer-In-Charge.All works must be executed by authorised agency/vendor approved by the Engineer-In-Charge

Supplying and Installing ITTF approved Foldable table for Table Tennis. The playing surface of the table shall be rectangular, 2.74 m long and 1.525m wide, and shall be in a horizontal plane 76cm above the finished floor.The thickeness of top shall be 25mm with 20 x 50mm frame size and 50 x 50 mm leg size.The playing surface shall be divided in to two equal courts by a vertical net running parallel with the end lines and shall comply with EN NORM 14468-1.The ITTF approved TT S5 rubbers Bat uses a 2.0 mm sponge and the acs-technology and 5+2-ply blade has a concave handle with excellent comfort and grip.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge All the works has to be carried out by certified sports area manufactures as per the approved design and direction of Engineer-In-Charge. Purchase :Rs.65000 per Set (Excluding GST ) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor

SH: OTHER WORKS Supply and fixing of ISOWALL 50 mm thick EPS, both side GI coated sheet panels for wall and ceiling, making return air boxing & access door with necessary angles, sealant etc.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Supply & fixing of coil coated laminated perforated aluminium sheet as per drawing of total thickness 2mm with fluorocarbon based (PVDF/ FEVE) coating applied through a reverse roller coating process on continuous color coating line. The weight of the panel should be 5.5 kg/m2. The aluminium panel top and bottom skin should confirm to alloy 3105 series and H24 temper with mechanical properties confirming to EN 485-2 standard. The top coated surface shall comply with the “specification for coated coil for the exterior building application” issued by ECCA (European Coil Coating Association). The coating shall confirm to AMMA-2605 for superior performing of exterior grade finish. The external cladding panel surface shall be in-house factory prefinished by the manufacturer with a fluorocarbon based (PVDF/ FEVE) coating applied through a reverse roller coating process on continuous color coating line. Screen panels will have customized perforation as per architect’s design. The manufacturer should have minimum 5 years of inhouse coil coating experience and thereby submit proof of same.Approved coil coating applicator certificate needs to be submitted by the manufacturer. The manufacturer should have inhouse quality control lab with calibrated testing equipment from NABL accredited third party.The reverse side of the cladding panel surface facing the wall shall be in mill finish / service coat. Application of the coating system by means of powder / spray coating after forming and shaping of the cladding elements shall not be permitted. The finished surface shall be protected with a self adhesive (Rubber based) peel off foil with 70 microns thickness white or black, tested to withstand upto 6 months exposure to standard weather condition without losing the original peel off characteristic or causing stain or other damages on the coated surface of the panels. If stain or any damage noticed after peel off, such panel should be replaced with new one of the same shade and colour, at no extra cost.The panels shall be manufactured with quality management system and manufacturing processes which are eco-friendly to the nature, conformity to ISO 9001:2015 (Quality management systems), ISO 14001:2015 (Environmental management systems) & ISO 45001:2018 (Occupational health and safety management systems) certifications of the panel manufacturer.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. (The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Purchase Price : Rs. 3350 Per Sqm (Excluding GST ) Any deviation plus or minus in the Purchase Price (Excluding GST) will be adjusted (paid extra / deducted ) while making payment to the contractor

SH : DISMANTLING & DEMOLITION WORKS Pile chipping and removing top excess lengths of RCC piles of 450m dia in same lines and levels as per structural details/instructions till sound concrete is met with, without damaging the remaining portion of pile, including chipping of the concrete, cutting of the ties reinforcement, conveying the cut bit of the reinforcement and stacking the same within the plot, removing debris away from the project site etc, complete including all labour charges and hire charges of tools and plants. but depth of cut pile up to 5.0m, complete as per directions of Engineer-in-charge.

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Cutting and removal of 8 mm thick M.S. liners for piles of 450mm diameter as per detailed drawings and designs.The rate is including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:Channels, angles, tees and flats.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge

SH : SANITARY FIXTURES & FITTINGS Providing and fixing white vitreous china wall mounted type water closet (European type) with soft close duroplastic seat and lid of approved make and model, etc. complete, including cost and conveyance of all materials, labour charges, lead, lift, fixing to the frame of concealed flush tank, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of WC pan with soft close seat and lid including all acessories shall be taken as Rs. 15250/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).W.C. pan with white soft closing duroplastic seat and lid

Providing and fixing white vitreous china wall mounted type water closet (European type) with soft close duroplastic seat and lid of approved make and model, etc. complete, including cost and conveyance of all materials, labour charges, lead, lift, fixing to the frame of concealed flush tank, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of WC pan with soft close seat and lid including all acessories shall be taken as Rs. 21413/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. W.C. pan with white soft closing duroplastic seat and lid

Providing and fixing Concealed Flushing Cistern with full frame for EWC with dual flushing system 3 / 6 litres with all accessories, actuator plate of approved make and model etc. complete including cost and conveyance of all materials, labour charges, lead, lift, cutting and making good the walls wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price ( Excluding GST ) of flushing cistern including all acessories shall be taken as Rs. 4140/- and Purchase Price ( Excluding GST ) of actuator plate including all acessories shall be taken as Rs. 3600/- and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing white vitreous china Wall Hung Urinal with built-in sensor (DC Type), of approved size with all accessories to provide satisfactory functioning, including necessary wall cutting / chasing and making good, waste connection and clamps, including all fittings as required for urinal flushing etc. complete, cost and conveyance of all materials, labour charges, lead, lift, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels.. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of Wall Hung Urinal with built-in sensor (DC Type) including all acessories shall be taken as Rs. 22385/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing complete set of sanitary fixtures for handicapped toilets, make of Cera "Crane" / Hindware Cat. no. 70002) / or approved equivalent comprising of EWC - P, Cistern, Seat Cover, Twin Flush Fittings, Wash Basin 450x300, Half pedestal, 1 faucet with spatula lever, 1 hinged rail and 2 grab bars, including cutting and making good the walls and floors wherever required, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of handicaped toilet including all acessories shall be taken as Rs. 46540/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing Counter Top Wash Basin 600 x 380 x 70 mm, or approved size and quality, 32 mm CP Brass waste assembly, 15 mm C.P. brass mixer taps, including cutting and making good the walls and floors wherever required, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price ( Excluding GST ) of counter top wash basin including all acessories shall be taken as Rs. 10944/-, waste coupling Rs. 1955/- and 15 mm CP bras mixer taps Rs. 8242/- and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).. White Vitreous China Counter Top Wash Basin rectangular size with single 15 mm C.P. brass mixer tap

Providing and fixing Counter Top Wash Basin 600 x 380 x 70 mm, or approved size and quality, 32 mm CP Brass waste assembly, 15 mm C.P. brass mixer taps, including cutting and making good the walls and floors wherever required, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price ( Excluding GST ) of counter top wash basin including all acessories shall be taken as Rs. 10944/-, waste coupling Rs. 1955/- and 15 mm CP pillar cocK RS 3179/- and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make including, cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP Brass 32mm size Bottle Trap including all acessories shall be taken as Rs. 884/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Providing and fixing C.P. Brass Health Faucet with chrome plated flexible tube 1.0 metre long with SS cup and wall hook etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of C.P. Brass Health Faucet with chrome plated flexible tube including all acessories shall be taken as Rs. 1300/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing C.P. Brass Health Faucet with chrome plated flexible tube 1.0 metre long with SS cup and wall hook etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of C.P. Brass Health Faucet with chrome plated flexible tube including all acessories shall be taken as Rs. 2745/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing gloss white cast acrylic construction reinforced marble freestanding bath tub 1700 x 800 x 565 or nearest size with slip resistant surface, of approved quality and make, waste coupling, bath tub over flow with floor flange accessory pack, pop up waste, masonry / concrete supports, etc. complete including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of gloss white cast acrylic construction reinforced marble freestanding bath tub including all acessories shall be taken as Rs. 63894/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Providing and fixing superior quality 15mm dia CP concealed diverter 4 way, of approved make and model, including cost and conveyance of all materials, labour charges, lead, lift, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP concealed diverter 4 way including all acessories shall be taken as Rs. 9625/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Providing and fixing superior quality 15mm dia CP bath tub spout, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP bath tub spout including all acessories shall be taken as Rs. 5160/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Providing and fixing superior quality CP Bath & Shower mixer set for Bathtub, of approved make and model, including cost and conveyance of all materials, labour charges, lead, lift, cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP Bath & Shower mixer set including all acessories shall be taken as Rs.7950/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Providing and fixing C.P. brass Ceiling Mounted Over Head Shower with 15 or 20 mm inlet of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of C.P. brass Ceiling Mounted Over Head Shower including all acessories shall be taken as Rs. 4740/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. 220 mm diameter

Providing and fixing CP Brass towel rail complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of CP Brass towel rail including all acessories shall be taken as Rs. 1375/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).450 mm long towel rail with CP cup

Providing and fixing CP Brass towel ring complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP Brass towel ring including all acessories shall be taken as Rs. 1350/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. CP towel ring with CP cup

Providing and fixing CP Brass towel rack complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc, of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP Brass towel rack including all acessories shall be taken as Rs. 2600/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. 600 mm long towel rack with CP cup

Providing and fixing CP brass toilet paper holder and accessories etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of CP brass toilet paper holder including all acessories shall be taken as Rs. 584/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. C.P. brass

Providing and fixing CP Brass soap Dish Holder with CP concealed fittings and accessories etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of CP Brass soap Dish Holder including all acessories shall be taken as Rs. 1400/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing Automatic Liquid Soap Dispenser of capacity 0.8L, aluminium / ABS body with chrome / black finish etc. complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of Automatic Liquid Soap Dispenser including all acessories shall be taken as Rs. 2800/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing Liquid Soap Dispenser, aluminium / ABS body with chrome / black finish etc. complete with brackets fixed to grips with CP brass screws with concealed fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of Automatic Liquid Soap Dispenser including all acessories shall be taken as Rs. 1295/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.

Providing and fixing CP brass twin coat hook with concealed fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.(The Purchase Price of CP brass twin coat hook including all acessories shall be taken as Rs. 600/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing C.P. brass long nose bib cock conforming to IS standards and weighing not less than 810 gms of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of C.P. brass long nose bib cock including all acessories shall be taken as Rs. 618/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points conforming to IS:8931 of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of C.P. brass angle valve including all acessories shall be taken as Rs. 712/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). 15mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. (The Purchase Price of 600x450 mm beveled edge mirror including all acessories shall be taken as Rs. 1284/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing Single lever Diverter with Over head shower fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose.(The Purchase Price ( Excluding GST ) of Single Lever Shower Mixer Rs. 3500/- with diverter Rs. 3800/- Bath spout Rs. 1750/-,Over head shower Rs. 5550/- Shower arm brass -1475/- and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing Gyser 15 Ltr with flexible connection fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 15 years and only skilled and experienced person shall be employed for this purpose.(The Purchase Price of 15 Ltr Gyser shall be taken as Rs. 11500/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore. , cost and conveyance of all materials, labour charges, lead, lift, etc. complete, testing and commissioning to the satisfaction of the Engineer-in-Charge as per direction of the Engineer-in-Charge at all levels.

SH: COLD / HOT / FLUSHING WATER SUPPLY (INTERNAL-EXPOSED ON WALL) Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 65 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 80 mm nominal inner dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 65 mm nominal inner dia Pipes

Providing and fixing UPVC ASTM Sch 40 pipes, for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal inner dia Pipes

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 20 mm nominal bore

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 25 mm nominal bore

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 32 mm nominal bore

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 40 mm nominal bore

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 50mm nominal bore

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 65mm nominal bore

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal gate valve with C.I. wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 80mm nominal bore

SH: INTERNAL DRAINAGE (SOIL, WASTE & VENT) Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing inside sunken slab / suspended below RCC slab for concealed soil and waste lines, making proper connection and also pipes may be laid / fixed in sunken floors, under hung from ceiling. The pipes laid in sunken floor shall be supported with cement concrete (1:2:4) blocks and under hung lines shall be supported from slab with universal clamps. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All GI pipe supports to hold the pipes is included in this item). 75 mm dia Type B

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing inside sunken slab / suspended below RCC slab for concealed soil and waste lines, making proper connection and also pipes may be laid / fixed in sunken floors, under hung from ceiling. The pipes laid in sunken floor shall be supported with cement concrete (1:2:4) blocks and under hung lines shall be supported from slab with universal clamps. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All GI pipe supports to hold the pipes is included in this item). 110 mm dia Type B

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing at wall / ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc., making proper connection etc for duct and ceiling suspended soil and waste lines. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS / GI supports to hold the stack is included in this item). 75 mm dia Type B

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing at wall / ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc., making proper connection etc for duct and ceiling suspended soil and waste lines. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS / GI supports to hold the stack is included in this item). 110 mm dia Type B

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent pipework conforming to IS : 13592 Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials, jointing done with solvent cement for fittings and specials, fixing at wall / ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc., making proper connection etc for duct and ceiling suspended soil and waste lines. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS / GI supports to hold the stack is included in this item). 160 mm dia Type B

Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 of class 3 ( 6kg/cm2) as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation for cocealed drain lines. (All major MS / GI supports to hold is included in this item) 40 mm dia 6 kg/cm2 (Class III )

Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 of class 3 ( 6kg/cm2) as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation for cocealed drain lines. (All major MS / GI supports to hold is included in this item) 50 mm dia 6 kg/cm2 (Class III )

Providing, fixing, jointing, testing and commissioning UPVC (Class III) Rain water downtake pipe conforming to IS:4985 cut to required lengths including all necessary fittings and specials.UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offsets and other specials. Fixing at wall/ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc. Making proper connection with cement solvent joint as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab and making good wherever required. (All major MS / GI supports to hold the stack is included in this item). 110 mm dia. 6 kg/cm2 (Class III)

Providing, fixing, jointing, testing and commissioning UPVC (Class III) Rain water downtake pipe conforming to IS:4985 cut to required lengths including all necessary fittings and specials.UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offsets and other specials. Fixing at wall/ceiling level supported by galvanized steel slotted rails, threaded rods, clamps, hangers etc. Making proper connection with cement solvent joint as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab and making good wherever required. (All major MS / GI supports to hold the stack is included in this item). 160 mm dia. 6 kg/cm2 (Class III)

Providing and fixing UPVC/SWR trap (Multi trap) of self cleaning design as per IS:13592 : 1992 complete including cost of cutting and making good the cutouts in walls and floors etc.including cutting and making good the walls and floors wherever required complete. 100 mm inlet and 75 mm outlet.

Providing and fixing Heavy Class cockroach free SS floor grating of approved design and make, including setting in floor with cement mortar / tile adhesive / epoxy joint filler to match with floor finish, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The Purchase Price of Heavy Class cockroach free SS floor grating including all acessories shall be taken as Rs. 500/- ( Excluding GST ) and any deviation plus or minus in the Purchase Price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. Size 125 mm X 125 mm or nearest size

SH: EXTERNAL SEWAGE/ STORM WATER DRAINAGE Providing, fixing, jointing, testing and commissioning UPVC (Class III) Soil, Waste & Rain Water Drainage pipes conforming to IS:4985 cut to required lengths including all necessary fittings and specials. UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, reducers and other specials including trenching, refilling & testing of joints etc. Making proper connection with cement solvent joint as per BIS / manufacturer, complete as per direction of Engineer in Charge. External work 75 mm dia 6 kg/cm2 (Class III )

SH: EXTERNAL SEWAGE/ STORM WATER DRAINAGE Providing, fixing, jointing, testing and commissioning UPVC (Class III) Soil, Waste & Rain Water Drainage pipes conforming to IS:4985 cut to required lengths including all necessary fittings and specials. UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, reducers and other specials including trenching, refilling & testing of joints etc. Making proper connection with cement solvent joint as per BIS / manufacturer, complete as per direction of Engineer in Charge. External work 110 mm dia 6 kg/cm2 (Class III )

SH: EXTERNAL SEWAGE/ STORM WATER DRAINAGE Providing, fixing, jointing, testing and commissioning UPVC (Class III) Soil, Waste & Rain Water Drainage pipes conforming to IS:4985 cut to required lengths including all necessary fittings and specials. UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, reducers and other specials including trenching, refilling & testing of joints etc. Making proper connection with cement solvent joint as per BIS / manufacturer, complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. External work 160 mm dia 6 kg/cm2 (Class III )

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 110 mm dia. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 160 mm dia. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.

Supplying, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of PVC gully trap of size 160 x 110 mm and CI grating 150 x 150 mm size and water tight C.I. cover with frame of 300 x 300 mm size (inside), the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cm x 30cm internal size gully trap shamber and depth upto 60cms, 115 thick brick wall in CM 1:6 on a foundation of PCC 1:4:8, 100 mm thick, plastering inside with CM 1:3, 12mm thick with a neat flushing coat and conveying to site, cleaning, installing and testing approved make PVC Gully Trap with 110mm outlet, surrounding with CC 1:1.5:3, 150x150mm, top with CI Grating, above the PVC Gully Trap, and light duty CI cover and frame over the chamber, including cost of all materials, etc. complete as per approved drawing and as directed by the Engineer-in-Charge. 160 x 110 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing, laying, jointing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls wherever necessary, testing of joints, etc complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm dia nominal bore

Providing, laying, jointing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls wherever necessary, testing of joints, etc complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm dia nominal bore

Providing, laying, jointing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls wherever necessary, testing of joints, etc complete as per direction of Engineer in Charge. Internal work - Exposed on wall 80 mm dia nominal bore

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal non- return valve of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 40 mm nominal bore, Vertical

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal non- return valve of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 50 mm nominal bore, Vertical

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of gun metal non- return valve of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. Vertical 80 mm nominal bore

SH: EXTERNAL SEWAGE PUMPING LINES Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes by thermal fusion method and testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. Internal work - Exposed on wall 63 mm outer dia Pipes

Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes by thermal fusion method and testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. Internal work - Exposed on wall 90 mm outer dia Pipes

Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings. This includes jointing of pipes by thermal fusion method, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. External work 75 mm outer dia Pipes

Providing, laying, jointing and fixing HDPE (PE-80) pipes 16kg/cm2 for sewerage, pipes confirming to IS 14333, including all HDPE fabricated and plain fittings. This includes jointing of pipes by thermal fusion method, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete. External work 110 mm outer dia Pipes

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of Butterfly Valve (Wafer Type), PN-1.6 with S.S-304 Disc, S.G. Iron body, Lever Operated, with Nitrile / EPDM Rubber Lining, of approved quality including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 40 mm dia

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of Butterfly Valve (Wafer Type), PN-1.6 with S.S-304 Disc, S.G. Iron body, Lever Operated, with Nitrile / EPDM Rubber Lining, of approved quality including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 50 mm dia

Providing, fixing, testing and commissioning to the satisfaction of the Engineer-in-Charge of Butterfly Valve (Wafer Type), PN-1.6 with S.S-304 Disc, S.G. Iron body, Lever Operated, with Nitrile / EPDM Rubber Lining, of approved quality including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer-in-Charge at all levels. 80 mm dia

SH: WATER SUPPLY PUMPS Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 1 to OHT for Cottage Capacity : 5.5 Litres / sec Head : 12 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 1 to UG Sump 2 Capacity : 7.4 Litres / sec Head : 18 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete. Cold Water Pump: Drinking Water Sump 2 to OHT for Convention Hall Capacity : 4.7 Litres / sec Head : 18 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 2 to OHT for Restaurant Capacity : 4.7 Litres / sec Head : 14 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Drinking Water Sump 2 to OHT for Sports Complex Capacity : 4.6 Litres / sec Head : 20 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Non Drinking Water Sump to OHT for Convention Hall Capacity : 3.0 Litres / sec Head : 24 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Non Drinking Water Sump to OHT for Restaurant Capacity : 3.0 Litres / sec Head : 24 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of monoblock centrifugal pump three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping drinking and non drinking water from sump to sump / overhead water tank, the pumps shall be made of CI casing, Boonze Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Cold Water Pump: Non Drinking Water Sump to OHT for Sports Complex Capacity : 2.3 Litres / sec Head : 28 Mtrs Type of Pump : Monoblock Centrifugal Pump Total No. of Pump-2No.(1W+1S)

SH: SEWAGE TRANSFER PUMPS Providing, fixing, testing and commissioning of self priming sewage / dewatering pump monoblock, three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping sewage from sump to sump / STP, the pumps shall be made of CI casing, CI Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Sewage Transfer Pump: Sewage Collection Tank 1 to Sewage Collection Tank 3 Capacity : 4.3 Litres / sec Head : 20 Mtrs Type of Pump : Self Priming Sewage / Dewatering Pump Monoblock Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of self priming sewage / dewatering pump monoblock, three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping sewage from sump to sump / STP, the pumps shall be made of CI casing, CI Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Sewage Transfer Pump: Sewage Collection Tank 2 to Sewage Collection Tank 3 Capacity : 5.9 Litres / sec Head : 20 Mtrs Type of Pump : Self Priming Sewage / Dewatering Pump Monoblock Total No. of Pump-2No.(1W+1S)

Providing, fixing, testing and commissioning of self priming sewage / dewatering pump monoblock, three phase electric motor, starters, all accessories like base plate, nuts, bolts, sundries etc. for pumping sewage from sump to sump / STP, the pumps shall be made of CI casing, CI Impeller, SS shaft & sleeve, Mechanical Seal, motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary accessories etc. complete.(The above work shall be carriedout by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Sewage Transfer Pump: Sewage Collection Tank 3 to STP Capacity : 10.5 Litres / sec Head : 15 Mtrs Type of Pump : Self Priming Sewage / Dewatering Pump Monoblock Total No. of Pump-2No.(1W+1S)

SH: PRESSURE BOOSTER PUMP SYSTEM Supplying, Installing, Testing & Commissioning at site in position Twin Booster Pack Pump system, vertical multistage pump with indivdual VFD, 100 litres pressure tank for HNS system, suction & delivery manifold, control panel suitable for automatic operation with cascade control facility and level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.(The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Twin Booster Pack System for Cottages Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Capacity : 3.0 Litres / sec Head : 40 Mtrs Pressure Vessel: 100 Litre / Suitable Capacity Total No. of Pump-2No.(1Working + 1 Assist)

Supplying, Installing, Testing & Commissioning at site in position Twin Booster Pack Pump system, vertical multistage pump with indivdual VFD, 100 litres pressure tank for HNS system, suction & delivery manifold, control panel suitable for automatic operation with cascade control facility and level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.(The above work shall be carried out by an agency having sufficient experience. Only skilled and experienced persons shall be employed for this purpose.) Twin Booster Pack System for Convention Hall Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Capacity : 2.0 Litres / sec Head : 30 Mtrs Pressure Vessel: 100 Litre / Suitable Capacity Total No. of Pump-2No.(1Working + 1 Assist)

Supplying, Installing, Testing & Commissioning at site in position Single Booster Pack Pump system, horizontal multistage pump without VFD, integral 60 litres tank, suction & delivery manifold, control panel suitable for automatic operation with level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Single Booster Pack System for Restaurant Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Head : 30 Mtrs Pressure Vessel: 60 Litre / Suitable Capacity Total No. of Pump-1No.(1Working)

Supplying, Installing, Testing & Commissioning at site in position Single Booster Pack Pump system, horizontal multistage pump without VFD, integral 60 litres tank, suction & delivery manifold, control panel suitable for automatic operation with level switch etc complete in all respects. The rate shall include the cost and conveyance of all materials, labour charges, lead, lift, etc. complete.The above shall be tested and commissioned in the presence of OEM technical representative and should ensure a guarantee of 2 years and only skilled and experienced person shall be employed for this purpose. Single Booster Pack System for Sports Complex Material of Construction : Impeller : SS, Delivery Casing : Cast Iron Capacity : 1.2 Litres / sec Head : 30 Mtrs Pressure Vessel: 24 Litre / Suitable Capacity Total No. of Pump-1No.(1Working)

USHA CONSTRUCTIONS

RAY ENGINEERING LTD

Crescent Contractors Pvt. Ltd.