Widening & Strengthening of Mandvi-Sehrulla road Km 0/0 to 14/0 Tal.Mandvi, Dist.Surat.

Name of work :- Widening & Strengthening of Mandvi-Sehrulla road Km 0/0 to 14/0 Tal.Mandvi,

Bill of Quantity

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

1 Clearing and grubbing road land including uprooting trunk vegetation, 6.30 Hec. 28179.36

grass bushes, shrubs, saplings and tree girth up to 300 mm, removal of

stumps of trees cut earlier and disposal of unserviceable materials (C)

by mechanical means in area of light jungle.

2 Box cutting the road surface to proper slope & camber for making a 61351.00 Cum 109.41

base for road work including compacting at O.M.C. and removing the

excavated stuff, and depositing on the road side slopes as directed with

all lead and lift.

3 Construction of granular sub-base 200 mm thick by providing machine 22242.00 Cum 759.52

crushed B.T. material satisfying MORT&H specification (Fifth

revision) of grading V including spreading in uniform layer with motor

grader on prepared surface, mixing by mix in place method with

rotavator at OMC and compacting with vibratory roller to achieve the

desired density etc. complete.

4 Construction of granular sub-base 150 mm thick by providing machine 8606.00 Cum 653.47

crushed B.T. material satisfying MORT&H specification (Fifth

revision) of grading III including spreading in uniform layer with motor

grader on prepared surface, mixing by mix in place method with

rotavator at OMC and compacting with vibratory roller to achieve the

desired density etc. complete.

5 Providing and laying wet mix macadam base course 250 mm thick in 13791.00 Cum 750.43

Each Layer of 125 mm as per MORTH specification using machine

crushed B.T. chips as per required gradation, mixing with required

optimum quantity of water, conveying the mix to site of work, spreading

in to grade and camber with paver/mechanical means and consolidation

each layer with vibratory roller to aschieve the desired density including

cost of material labour plant and equipment etc. complete.

6 Providing and applying priming coat with Bitumen grade Emersion SS- 48545.00 Sqm 62.37

1 at the rate of 7.50 kg / 10 Sq.mt. including cost of asphalt and

preparing the surface heating, and applying etc. complete.

7 Earth work for embankment including breaking clods, dressing with all 19209.00 Cum 177.91

lead and lift including watering, rolling and consolidation of sub grade

in layers at O.M.C to required dry density including filling the

depression which occur during the process using vibratory roller 8 to

Tonne (E) From borrow area within 3.0 Km. lead.

8 Rolling and watering of earth work in layers with power roller including 41436.00 Cum 23.11

filling in depression which occur during the process.

9 Earth work in cutting in all sorts of soil and soft murrum including 21520.00 Cum 134.63

conveying and spreading the stuff embankment as and where directed

within 200 meter from the end of cutting with all required lead and lift.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

10 Supplying and fixing reinforced concrete heavy duty nonpressure pipes 210.00 Rmt 3904.47

with collars for culverts including setting and joining the pipes in C.M.

1:2 watering and laying (To level of slops of I.S. 458 / 1971) Class NP4

casted by vertically vibrated technology of following internal diameter.

11 Providing and laying 50 mm thick compacted B. M. with B.T. aggregate 5340.00 M.T. 2795.68

as per MORT&H specification using Emulsion grade RS-1 for coat at

2.5 Kg. / 10Sq.mt. with mechanical sprayer and bitumen grade VG-40

for mixing at the rate 34.0Kg/M.T. i.e. 3.4 % of total mix including

heating the aggregate and asphalt by drum mix plant and spreading the

same by paver finisher and consolidation with vibratory roller including

providing all materials, equipments, tools and plants, oil, kerosene, fire

wood, labour charges etc. complete.

12 Providing and laying 50 mm thick Dense graded bituminous macadam 5582.70 M.T. 3326.94

with tack coat at 2.50 Kg /10 Sq.mt. of Emulsion RS-I by mechanical

sprayer and using stone chips as per MORT&H gradation and asphalt

VG-40 grade @ 4.50% (As per mix design)by total weight of mix for

binder by Drum mix hot laid process including transporting the mix and

spreading the same by paver finisher and consolidation by vibratory

roller including providing and operating required drum mix plant &

machinery cost of fuel, asphalt, oil, lubricant & labour charges etc.

13 Providing and laying 40 mm thick compacted Bituminuous Concrete 4661.00 M.T. 3706.70

using stone chips as per MORT&H gradation & VG-40 grade asphalt

for mixing @ 5.50% (As per mix design) by weight of total mix for

binder including heating the aggregate and asphalt by drum mix plant

and spreading the same by sensor paver finisher and consolidation with

vibratory roller including providing all materials, equipments, tools and

plants, oil, kerosene, fire wood, labour charges etc. complete.

14 Providing and laying Quarry Spall of approved quality including 4203.00 Cum 482.78

spreading, watering consolidation with vibratory roller including

loading and unloading etc. complete.

15 Road marking with hot applied thermoplastic paints with reflectorising 5593.00 Sqm 367.72

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35-2015. The finished surface to

be level, uniform and free from streaks and holes. zebra patta / bump

patta lane / center line / edge line / cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for

the Retro reflectivity should be two years.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

16 Supply and Apply Rumbble Strips Road marking with hot applied 522.00 Sqm 1772.55

thermoplastic paints with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic compound 8 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness

of 8mm is excluding of surface applied glass beds as per IRC:35-2015.

The finished surface to be level, uniform and free from streaks and

17 Supply and fixing cats eye (Stimsonite) made out of Acrilo beautile 7098.00 Nos. 375.72

sterine injuction high compressed molding with reflector made of MMC

(prismatic type) size 12 cms x 6 cms x 2.5 cms, provided with

bituminous adhesive 100 g. with each unit for fixing (High Intensity

18 Direction (Junction) Sign :-Providing and fixing sign boards made out 7.00 Nos. 26572.09

of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel) size

244x122 cms. rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with High

Intensity Prismatic Grade retro refiective sheeting of Type-4 as per

ASTM D- 4956 and latest M.O.S.T. Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy coatings in black and white

bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg including excavation,

curing etc. complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by

contractor. (B) Class-C Type-11 Retro Reflective sheeting.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

19 Cautionary Warning Sign :-Providing and fixing sign boards made out 84.00 Nos. 5077.27

of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel) size

90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching coated with one coat of

epoxy primer and two coats of best quality epoxy paint reflectorised

with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per

ASTM D-4956 and latest M.O.S.T. Specifications; 3.6mtr longstand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm painted with

bestquality epoxy coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

Cms. for each leg. including excavation, curing etc. complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting.

20 Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 92.00 Nos. 3666.30

mm aluminium sheet / 4 mm ACP (Aluminum composite Panel) size

90x30 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T. Specifications 1.8mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm painted with bestquality

epoxy coatings in black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc. complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

21 Village Name Sign :-Providing and fixing sign boards made out of 2mm 20.00 Nos. 6313.51

aluminium sheet / 4mm ACP (Aluminum composite Panel) size 90x60

cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with

Micro Prismatic Grade retro refiective sheeting of Type-11 as per

ASTM D-4956 and latest M.O.S.T. Specifications 3.3mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm painted with

bestquality epoxy coatings in black and white bends. The details of

symbol or inscription / letters / umerals for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC blockof size 45 x 45 x 60 Cms. for each leg. including excavation,

curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro eflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective sheeting.

22 Facility Informatory Sign :-Providing and fixing sign boards made out 15.00 Nos. 5906.48

of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel) size

80 x 60 cms rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T. Specifications 3.6mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm painted with bestquality

epoxy coatings in black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

23 Regulatory / Mandatory Sign :-Providing and fixing sign boards made 18.00 Nos. 4618.73

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel)

size 60 cms Dia Circle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type 11 as per ASTM

D-4956 and latest M.O.S.T. Specifications 3.6mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm painted with best quality

epoxy coatings in black and white bends. The details of symbol foreach

board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting.

24 STOP Sign :-Providing and fixing sign boards made out of 2mm 2.00 Nos. 7213.42

aluminium sheet / 4mm ACP (Aluminum composite Panel) size 90 cms

Octagone as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type- 11 as per ASTM D-4956 and

latest M.O.S.T. Specifications 3.6mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm painted with bestquality epoxy

coatings in black and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

25 Route Marker sign :-Providing and fixing sign boards made out of 2.0 2.00 Nos. 5108.58

mm aluminum sheet / 4 mm ACP (Aluminum composite Panel) size

60x45 cm rectangular plus 30x25cm additional plate as per design of

IRC-67-2012. Pretreated with phosphating process & acid etching;

coated with one coat of epoxy primer and two coats of best quality

epoxy paint reflectorised with Micro Prismatic Grade retro reflective

sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications 3.6 mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size

iron angle of 35x 35 x 3mm painted with best quality epoxy coatings in

black and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for

each leg. including excavation, curing etc. complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting.

26 Chevron Sign:- Providing and fixing sign boards made out of 1.5mm 45.00 Nos. 4681.35

aluminium sheet / 3 mm ACP (Aluminium composite Panel) size

x50 cm as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching coated with one coat of epoxy primer and two

coats of best quality epoxy paint reflectorised with Micro Prismatic

Grade retro refletivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T. Specifications 3.3 mtr. long stand post of 75 x 75 x6mm

/ 65 NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 50 x 50 x 5mm; painted with bestquality

epoxy coatings in black and white bends. the deails symbol or inscriptio/

numerals for each board shall be per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blac of size 45 x 45 x

Cms. for each leg. Including excavation, curing etc. complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeing from originaa manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective Sheeting.

27 Metal Beam Crash Barrier:-Type - A, "W" Metal Beam Crash Barrier 605.00 Rmt 4178.17

(Providing and erecting a "W" metal beam crash barrier comprising of

3 mm thick corrugated sheet metal beam rail, 70 cm above road /

ground level, fixed on ISMC series channel vertical post, 150 x 75 x

mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground / road

level, all steel parts and fitments to be galvanised by hot dip process, all

fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed

on the vertical post with a spacer of channel section 150 x 75 x 5 mm,

330 mm long complete as per clause

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

28 Providing and fixing 5th kilometer stone of precast C.C. 1:2:4 including 4.00 Nos. 1935.15

necessary reinforcement as per I.R.C. type design in C.C. 1:4:8

including painting and lettering etc. complete.

29 Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 24.00 Nos. 1293.38

including necessary reinforcement as per I.R.C. type design in C.C.

1:4:8 including painting and lettering etc. complete.

30 Providing and fixing hectometer as per I.R.C. type design including 113.00 Nos. 356.50

painting lettering etc. complete fixing in C.C. 1:5:10.

31 Removing of stumps and roots of trees and disposal of unserviceable 605.00 Nos. 567.62

materials and stacking of serviceable materials to be used or auctioned

up to a lead of 1000 meters including refilling the excavated pit with

selected soil and compacting with vibratory roller as directed (A) Trees

having 300 mm to 600 mm girth.

32 Removing of stumps and roots of trees and disposal of unserviceable 242.00 Nos. 759.52

materials and stacking of serviceable materials to be used or auctioned

up to a lead of 1000 meters including refilling the excavated pit with

selected soil and compacting with vibratory roller as directed (A) Trees

having 600 mm to 900 mm girth.

33 Removing of stumps and roots of trees and disposal of unserviceable 242.00 Nos. 913.04

materials and stacking of serviceable materials to be used or auctioned

up to a lead of 1000 meters including refilling the excavated pit with

selected soil and compacting with vibratory roller as directed (A) Trees

having 900 mm to 1800 mm girth.

34 Removing of stumps and roots of trees and disposal of unserviceable 121.00 Nos. 1134.23

materials and stacking of serviceable materials to be used or auctioned

up to a lead of 1000 meters including refilling the excavated pit with

selected soil and compacting with vibratory roller as directed (A) Trees

having girth above 1800 mm.

(Rupees Eleven Crore Forty Three lakh Eight Thousand Five Hundred Seventy Three and Twenty Nine Paise Only.)

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be

written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…114308573.286 Put to tender Rs.

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

*( please strike out whichever is not applicable)

Note 1:- The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

Note 2:- The labour cess will be deducted as per prevailing rules ie. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Item Description of Item (with brief specification and reference to book Quantity Unit Rate Amount

No. of specifications) In figure

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual

mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Note 5:- To be continued on additional sheet, if found necessary.

Signature of Bidder Deputy Executive Engineer

Mandvi (R&B) Sub Division,

Executive Engineer

Surat (R&B) Division No.2,