REPAIR TO BR ITEMS OF ZONE C AND REPAIR REPLACEMENT OF ELECTRICAL WIRING WITH FITTING FIXTURES AND SUBMAIN WIRING WITH DBS AND SERVICE CONNECTION WITH EARTHING IN OFFRS MD ACCN AT MIL STN DHRANGADHRA

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed

M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick on vertical surface such as skirting/dado, incl highlighter patterns complete set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cmx20 cmx25 mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified.

M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, 25 mm thick and finishing the surface rough to receive tile complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors,aprons etc. laid beeded and jointed and pointed complete all as specified and directed.

M&L for machine cut kota stone slab, 550mmx550mm, 20-25mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:3), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed.

Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3)on fair faces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in two layers, 10mm thick in CM 1.:6 and 5mm thick in CM 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on ceilings complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coat of oil bond distemper on walls,with JK/Birla putty complete surfaces of wall including preparatory to distempering on walls all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint r complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall including brooming dowon or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on wall complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as sunken floor, roof padding etc complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded aggregate for filling into sunken floors, sub bse etc. complete as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Taking down chowkats or frame of any description n exc 1.5 Sqm each (without taking off shutters from the frames) removing to store complete as specified and directed.

Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) removing to store complete as specified and directed.

Taking down chowkats or frame of steel windows/ ventilators n.exc 1.5 Sqm (without taking off shutters from the frames) removing to store complete as specified and directed.

Taking down shutters of description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Re-fixing in the same opening of shutters of any description exc 1 sq and n exc 2 sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description complete all as specified and directed.

S&F, MS angle iron framed work as in doors or gates of angle or other section conforming to Fe 290(Gde E-165) with gusset plates, rails, braces, etc complete including hanging also fastening and fixing complete as specified and directed.

S&F, 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge.

S&F, 30mm thick flush shutter with solid core construction with block board core and plywood face panel commercial type on both faces complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing and suitable handle etc. complete all as specified and directed.

S&F 5mm thick Sheet glass, ordinary quality with and including neoprene beadings in square exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type including neoprene beading in in squares n exc 0.5 sq.m in each pane complete all as specified and directed.

M&L for anodised aluminium handles 75 mm size of approved pattern for aluminium windows complete all as specified and directed.

M&L for anodised aluminium tower bolts 75 mm size of approved pattern for aluminium windows

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F,as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F MS framed work such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge.

S&F, 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy complete all as specified and directed.

S&F, 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F, aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size complete all as specified and directed.

S&F, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F 100mm double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed.

S&F in repairs Harrison rails, mild steel, chromium platedwith fixing brackets,stops, rollers etc. complete all as specified and directed.

S&F 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F, in repairs, 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

S&F hasp & staples 125mm in size, safety type alu. anodised fixed with screws complete all as specified and directed.

Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, such as manholes cover etc complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs(for manholes etc) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inclding cranking, bendiing spirally for hooping for columns, hooking ends and biinding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in fins, facia, chajja, parapet, louvers, railing complete to match with existing all as specified and directed.

S&Fas in repairs vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china wash down closet pan (pedestal pattern) of white (excluding flushing cistern and flush pipe) but incluging trap, connection to drain pipe or outgoing pipe and to flushing pipe, antisyphonage pipe, seat and cover etc complete all as specified.

S & F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.

S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

Supply only 15mm pillar taps, brass chromium plated fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed.

S&F in repairs 25mm bore dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 40mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F, in repair, kitchen sink with drainage board made of stainless steel 1mm thick including supply and fixing 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Cutting chases in stone walls , pinning in, making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing or concealed conduit wiring, etc and making good, cutting exceeding 10cm girth but nexc 20 cm , complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks of capacity 500 Litres (Cylendrical vertical with closed top)hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks of capacity 1000 Litres (Cylendrical vertical with closed top)hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as specified and directed

Dismantling of 100mm dia cast iron , SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches if required complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/ walls complete all as specified and directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed.

S&F PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.

S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece single (single ‘Y’) equal or unequal suitable for 75mm bore pipe complete all as specified and directed.

S&F PVC (SWR) branch piece single (single ‘Y’) equal or unequal suitable for 110mm bore pipe.

S&F PVC (SWR) vent cowl of 75mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.

S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete fixed all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for walling of random rubble stone masonry, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

M&L for preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint complete all as specified and directed.

M&L for preparation of old painted Steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint.

Dismantling of asbests cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.

S&F, 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding t wall, fixed with self tapping screws as specified.

Dismantling timber scantling 40 sqcm and over in section, an any position (framed) complete all as specified and directed.

Dismantling of timber scantling fillet rails, post rafter purlin etc under 40 sq cm in section (unframed) complete all as specified and directed.

S&F Rolled section as in main and cross beam hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. Gde Fe 410-W including one shop coat of zinc chrome primer complete all as specified and directed.

S&F Mild steel for roof trusses (framed), trussed purlins, crane gantires, rails and fasternings and heavy bracket framming (beam, tee, angle, channel or flat sections ) incuding distance pieces, clats etc. and confirm to Gde- Fe-410-0 or Fe 310-0 including one shop coat of zinc chrome primer complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed.

S&F, in repair Door closer hydraulically regulated, Aluminium (extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F, in repair, false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.

M&L for preparation of old plastered or un-plastered surfaces and applying one coats of Exterior emulsion paint (Apex) complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of Exterior emulsion paint (Apex) over a coat of primer complete all as specified and directed.

Supply only distemper oil emulsion any tint any shade complete all as specified and directed.

Supply only Cement Base Paint any tint any shade complete all as specified and directed.

Supply only Chalk whitining/ Lime for white washing complete all as specified and directed.

S&F, in repair, glass shelf, 600mm long complete all as specified and directed.

S&F, in repair, vitreous china table top wash basin, white, flat back of size 550mm x 400mm including grouted in cement mortar 1:2 on Granite top supported on RCC slab complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. Make : Cera (Brand Coyal/Corba/canal) or equivalent as approved by Engr-in-Charge.

S&F, in repair, vitreous china wash down water closet pan (wall hanging two piece pattern) including 'P' or "S" trap, and seat cover with complete fitting. Make : Cera (Brand Compell/Celiver) or equivalent as approved by Engr-in-Charge.

S&F in repairs 32mm waste fittings brass chromi-um plated for glazed ware basin etc with long screwed shanks and fly nuts flange end complete ISI marked complete all as specified and directed.

S&F, in repairs, 15mm pillar taps, brass chromium plated fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed.

S&F, in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F, in repairs, 15mm stop valves, fancy type brass chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed.

S&F, in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and directed.

S&F, in repairs, 8mm dia brass chromium plated health faucet(Hand shower) with 01 metre long flexible tube and wall hook complete all as specified. Make : Jaquar Cat No. ALD-573 or equivalent as approved by GE.

S&F,in repairs, chromium plated over head shower 100mm dia round shape single flow (ABS Body chrome plated with Gray face plate) with rubit cleaning system complete all as specified and directed.

S&F, in repairs, grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :- Make of Cable Polycab/Finolex/Havells

(a) One light/fan point controlled by one switch

(b) One light point controlled by two, 2- way switches.

(c) One 3 pin, 5 Amps, socket outlet on the same board controlled by another switch.

(d) One multi pin 5 Amps, socket outlet on Independent board.

(e) One bell/ buzzer point controlled by one push buttons independent

M&L for point wiring for modular points one light/ fan/ bell point controlled by one switch with1.5 Sqmm (Nominal area) PVC insulated, unsheathed, stranded copper, conductor cable FRLS (1100Volts grade) drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. PVC insulated cable with copper conductor of size 1.5 Sqmm as earth continuity conductor including fixing of modular white cover plate with frame for 2/4/6/8 modules, 1.2 mm thick modular metal flush box concealed type with 2/4/6/8 module for housing modular switches complete MS sunk terminal box duly flushed to wall fixed complete making good the disturbed surfaces complete all as specified and directed. Make of Cable Polycab/Finolex/Havells,ISI Marked Note:- (i) The Cuttingchases in the wall / stone machenary shall be deemed in the quotated rate (ii) The disturbed surfaces of wall shall be made good with including matching the surfaces with existing finishes and to the entire satisfaction of Enginer in Charge.

(a) One modular light/fan point controlled by one switch

(b) One modular light point controlled by two, 2- way switches.

(c) One modular3 pin, 5 Amps, socket outlet on the same board, controlled by another switch.

(d) One modular multi pin socket outlet, 5 Amps, on Independent board.

(e) One modular bell/buzzer point controlled by one push buttons independent.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed. Make of Cable Polycab/Finolex/Havells

M&L for wiring with and including multistranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 4.0 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed. Make of Cable Polycab/Finolex/Havells

S&F, in repairs, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed

S&F, socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed

S&F, in repairs, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed

S&F, in repairs, socket outlet, 2 in 1, 3 pin, 15 Amps and 5 Amps flush type complete all as specified and directed

S&F, in repairs, switch flush type 5 Amps, single pole, two ways complete all as specified and directed

S&F, in repairs, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

S&F, in repairs, bell push, flush type 5 Amps complete all as specified and directed.

S&F, in repairs, ceiling fan step type regulator,AC 230 Volts complete all as specified and directed. Make of Anchor(Penta) or equivalent make Legrand/ Havells

S&F, in repairs, lamp holder, PVC/Polycarbonate, with back plate suitable for batten fittings complete all as specified and directed

S&F , in repairs, modular switch 1 way 10A, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make Legrand/ Havell /ABB.

S&F , in repairs, modular socket 10 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make of Havells/ legrand.

S&F, modular switch 1 way 20A, 1 module complete all as specified and directed. As per Cat No. 21066 of Anchor(Roma) or equivalent make Legrand/ Havell /ABB.

S&F, in repairs, modular socket 20A, 2/3 pin combined, 2 module complete all as specified and directed.Make of Anchor(Roma) or equivalent make of Legrand/ Havells.

S&F , modular switch 2 way 10A, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make Legrand/ Havell /ABB.

S&F, in repairs, modular bell push 6 Amps, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make of Legrand/ Havells.

S&F, in repairs, modular fan step type regulator, sutabule for 1200/ 1400mm sweep, 1 module complete all as specified and directed. Make of Anchor(Roma) or equivalent make of Havells.

S&F, in repairs, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20 Amps, 10 KA, 240 volts complete all as specified and directed. Make ;Legrand / Havells/ standard.

S&F, in repairs, sheet metal distribution board, SPN, 12 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A bus bar complete all as specified and directed. Make ;Legrand / Havells/ standard.

S&F, in repairs, sheet metal distribution board, SPN, 8 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A bus bar complete all as specified and directed

S&F, in repairs, sheet metal distribution board, SPN, 4 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed

S&F, in repairs, sheet metal distribution board, single door, factory made and tested complete, suitable for mounting MCBs, isolator of capacity 2 way 240 Volt complete all as specified and directed

S&F, in repairs, sheet metal distribution board, 3 phase with neutral ( TPN ) of 4 way 415 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed

S&F, in repairs, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F, in repairs, in repairs, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.

S&F, in repairs, miniature circuit breakers, Single pole and neutral, type curve ‘C’ 10KA, 32 Amps 230 Volts. complete all as specified and directed.

S&F, in repair, miniature circuit breakers, Single pole and neutral, type curve ‘C’ 10KA, 40 Amps 230 Volts. complete all as specified and directed.

S&F, in repair, miniature circuit breakers, Three pole and neutral, type curve‘C’ 10KA, 40 Amps, 415Volts. complete all as specified and directed.

M&L for checking electrical points such as PT switches,Sockets 5A/15 Amps,light points, Lamp holders, Light fittings & fixtures, Ceiling rose, MCBs, MCB DBs, fans regulatores, call bell, bell push, ceiling fans/Exhaust fans for continuous electric supply ,locating & rectification of defects including carrying out minor repairs, fixing screws ,tightening of loose wires, applying PVC insulation tape, fixing fuse wire any type renewal of small pieces of wire upto 1.00 mtr length and similar work complete all as directed at site, Four complaints will be measured as one unit. Note :- 1. The contractor's electricians & helpers should be receive the Job cards of complaints from complaints cell (Arman and day to day complaints) on 0900 Hrs dailly basis ,electricians & helpers should be reporting 0900 Hrs to attend the complaints with necessary tools. The complaints shall be attended and completed within same day.The complaints received on sunday and holidays should be attended on the same day. Four complaints will be measured as one unit. 2. Stores such as PT switches,Sockets5A/15 Amps,light points, Lamp holders, Light fittings & fixtures, Ceiling rose, MCBs, MCB DBs, fans regulatores, call bell, bell push will be measured and paid separately under respective item.

S&F, in repairs, sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 2.5 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. Make of Cable Polycab/Finolex/Havells

S&F, in repairs, sub-main wiring with 4 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing 2 run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 2.5 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 4 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. Make of Cable Polycab/Finolex/Havells

S&F, in repairs, sub-main wiring with 4 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing 2 run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 2.5 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 4 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. Make of Cable Polycab/Finolex/Havells

S&F, in repairs, LED tubeler lamp (rod) 18/ 20 watt double side connection for soft diffuser lighting and of suitable for batten box type fitting testing on completion all as specified and directed all as directed by Engr-in-charge. Make: Havell / wipro/ Bajaj.

S&F, in repairs, surface /wall mounted batten box type fitting for LED Tube 18/20 watt, housed in extruded from powder coated aluminium, and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed all as directed by Engr-in-charge. Make: Havell / wipro/ Bajaj.

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 18 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. Make: As per Cat No. BAJAJ LED BATTEN 18W of Bajaj or equivalent make : Havell / wipro/ philips.

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 9 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. Make: As per Cat No. BAJAJ LED BATTEN 9W of Bajaj or equivalent make : Havell / wipro/ philips.

S&F, in repairs, LED Mirror light fitting, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. make of wipro/Havells/Philips wipro

S & F LED 24 watt recess mounting 2 x 2 luminaire of 24 watt, white powder coated CRCA housing with highpower LEDs. Aluminium front frame with flat white high transmission acrylic cover prewired and all accessories Make: Wipro , or equivalent in Havells/philiphs

S&F in replacement of building security light luminaries 25 watt with wall mounting bracket of suitable size and clamps, nut bolts etc.having pressure die cast housing with epoxy power coated dark graphite grey colour finish,prismatic polycarbonate cover with individual LED lenses-IP65 prewired Conforming to Crompton or of equivalent make of wipro/Havells/Philips wipro

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m.

AMI CONSTRUCTIONS

Bhumi Construction

BHAVIK SUPPLY CORPORATION