Construction of LILO of 220KV C.B. Ganj-OCBTL Line alongwith supply of material and other associated Works at 220KV Substation Budaun Road Bareilly under ETD, Bareilly

Amount

Construction of LILO of 220KV C.B. Ganj-OCBTL Line alongwith supply of material and other associated Works at 220KV Substation Budaun Road Bareilly under ETD, Bareilly with all Cost of Men, Materials, Misc. Consumables, T&Ps, Transportation of Materials for Satisfactory Completion of the Work as per Technical Specifications and Direction of the Supervising Engineer, as per Details below :

Supply (A)

48 fibre OPGW fibre optic cable

supply and installation of hardware set for 48 fibre OPGW

joint box (48 fibre)

Compression type double Tension Fitting Assembly, suitable for ACSR zebra Conductor consisting of Compression Dead End Clamp with Jumper Terminal (Cone), Anchor Shackle, Ball Clevis (HH type), Socket Clevis (HH type), Line side Arcing Horn, Tower side Arcing Horn complete with Bolts-Nuts-Spring Washers, Split Pin etc. as per Technical Specifications & Sample.

Compression type single Tension Fitting Assembly, suitable for ACSR zebra Conductor consisting of Compression Dead End Clamp with Jumper Terminal (Cone), Anchor Shackle, Ball Clevis (HH type), Socket Clevis (HH type), Line side Arcing Horn, Tower side Arcing Horn complete with Bolts-Nuts-Spring Washers, Split Pin etc. as per Technical Specifications & Sample.

Mid Span Compression Joint, suitable for ACSR zebra Conductor consisting of extruded Aluminium Outer Sleeve (OD 38±1 mm, ID 23±0.2 mm, L 610±5 mm) and Mild Steel Inner Sleeve (OD 18±0.5 mm, ID 9.5±0.2 mm, L 203±5 mm) as per Technical Specifications & Sample.

Repair Sleeve suitable for ACSR zebra Conductor duly made of extruded Aluminium Sleeve (OD 38±1 mm, ID 23±0.2 mm, L 241±5 mm) as per Technical Specifications & Sample

Stock Bridge Vibration Damper (4R type), suitable for ACSR zebra Conductor as per Technical Specifications & Sample.

Number Plate in size of 165 mm x 150 mm duly made of 16 SWG M.S. Sheet with Letters and Numerals in enameled Red colour on White Colour Enameled Background, Indicating Name of Transmission Line in Short Form (in English Letter of size 35 mm height) and Tower No. (in English Letter of size 65 mm height) as per Requirement alongwith 2 No. 16 mm x 40 mm size G.I. Bolts - Nuts - Spring Washers with of 2 No. holes in Number Plate for Fixing as per Technical Specifications & Sample and Instruction of Supervising Engineer.

Phase Plate in Sets of both sides Enamelled Red, Yellow & Blue Colour Circular Discs of dia. 100 mm duly made of 16 SWG M.S. Sheet alongwith 1 No. 16 mm x 40 mm size G.I. Bolt - Nut - Spring Washer with 1 No. hole in Phase Plate for Fixing as per Technical Specifications & Sample.

Danger Plate in size of 380 mm x 250 mm duly made of 16 SWG M.S. Sheet and Written 'DANGER' in English Letter of size 35 mm Height, in Hindi Letter of size 45 mm height, '132000 Volt' in English Letter of size 30 mm Height, Indicating 'Sign of Danger' in size of 70 mm x 80 mm all shown Symmetrically in Enamelled Red Colour on White Colour Enamelled Background alongwith 2 No. 16 mm x 40 mm size G.I. Bolts - Nuts - Spring Washers with 2 No. holes in Danger Plate for Fixing as per Technical Specifications & Sample.

Pipe type earthing material.

Work (B)

Survey including Making of Location Route, Preparation of Profile, Tower Schedule, Schedule of Materials for Transmission Line on 132KV D.C. Towers.

Check Survey & Peg Marking of Tower Locations. (1 Job per Loc.)

Excavation of Foundation Pits for 220KV Towers including all Earth Work, Back Filling, Levelling etc.

Setting of Stubs of 220KV D.C. Towers including all Foundation Work but excluding the Cost of Concerting & Excavation as per Details below (01 job per loc.)

B+0' & 'B+5' type Tower

C+5' / type Tower

Concreting of Foundations using M20 Grade Cement - Concrete - Coarse Sand Mixture in the Ratio of 1:2:4 with 20 mm Stone Metal for Towers & Gantries including Cost of Materials, De-Watering, Shoring, Shuttering, Framing, Curing etc.

Installation of Steel Reinforcement Bars in R.C.C. Foundation for Towers & Gantries including Cost of Steel Reinforcement Bars with due Cutting, Bending, Placing, Binding etc.

Erection of Super Structures of above 220KV Towers, their Extensions wherever Required including all Work above Ground Level with Proper Fixing & Tightening of all Tower Parts including Fitting of Danger Plate, Phase Plate, Number Plate, Bird Guard etc. but Excluding the Hoisting of Insulators, Fixing of Hardware Fittings, Conductor / Earth Wire Fittings / Accessories etc.

Tack Welding of all the Bolts - Nuts upto 2nd Section of the Towers from Ground Level with 3 Tacks of 10 mm thickness & Finally, Applying of Zinc Rich Aluminium Paint on the Affected Surfaces.

Anchoring by providing of Stay on Cross Arm of Section Towers before removal of old Conductors by making C.C. Foundation for Anchoring of Stay Wire, Fixing of suitable Stay Wire / Rod etc. and finally, removal thereof after String of new Conductors. (1 Job. per Cross Arm)

De-Stringing of 3 No. Phase Conductors between Tower Loc. No.33B to Loc. No.34A of existing 220KV S.C. budaun-CB ganj Transmission Line on S.C. Towers. (1 Job per Span)

installation ,Laying ,test & commissioning of links of 48 fibre OPGW fibre optic cable alongwith all necessary hardware sets excluding joint box.

Laying, Stringing, Tensioning, Clamping of ACSR zebra Conductor including Hoisting of Tension Insulator Strings, Single Tension Fittings, Vibration Dampers etc. On all of six phases of 220kv DC lines.

Laying, Stringing, Tensioning, Clamping of ACSR zebra Conductor including Hoisting of Tension Insulator Strings, Single Tension Fittings, Vibration Dampers etc. On all of three phases of exixting 220kv SC lines.

Earthing Work including Earth Work etc. for Pipe type Earthing of new Section Towers including cost of Coke, Salt etc.

Dismantling of 01 No. 220KV ‘A’ Type S.C. Tower at Loc. No. 34A of existing 220KV budaun - C.B. Ganj Transmission Line on S.C. Towers including all associated Works above the Ground Level with Proper Opening of Bolt-Nuts-Washers, all Towers Parts including Danger Plate, Phase Plate, Number Plate. Bird Guard etc. and due Cutting of Tack Welding of Bolts-Nuts.

Cutting of Stub and taking out the Chimney by Scrapping & Excavating the Earth, then Removal of Scrap Materials & Leveling of the Earth to Make it suitable for Farming. (1 Job per Stub / Chimney)

Transportation of Dismantled Tower Parts ,ACSR zebra Conductors, 7/10 SWG Earth Wire, Disc Insulators, Hardware Fittings etc. (Approx. 05 MT) from Line Site to 220KV Sub Station C.B. Ganj, (Approx.up to 25 Km Distance) as per Direction of the Supervising Engineer including Loading, Unloading & Stacking etc.

Round the Clock Watch & Ward of the Line / Line Materials during construction Work to Avoid Theft of Conductors, Hardware Fittings, Accessories etc. (1 Job per Day).

M/s S.S. Refregeration

Jagad Electrical & Fabricators