CGF Fund

1) Construction of Dhyana Mandiram (Ground Floor) in the Premises of Sri Prasanna Venkateswara Swamy Temple

Earth work excavation and depositing on bank with intial lead of 10m and initial lift of 2m in loamy cleay soils like block cotton soils hard red earth and ordinary gravelly soils etc., complete for foundation

Sand Filling in foundations and basement with best river sand in layers of not more than 15cms thick each well watered to saturation and consolidated including cost and conveyance of all materials incidental charges etc., complete

C.C(1:4:8) using 40mm HB metal for foundation bed with well compacted including cost and conveyance of all materials, labour for curing, ramming, watering etc.,complete For Column Foundations

V.R.C.C(1:1 1/2:3) using 20mm HBG crushed metal with necessary reinforcement including cost and conveyance of all materials, labour for mixing, laying, vibrating, curing etc., complete but excluding cost and fabrication of steel A) For Footings

B) For Plinth Beam

E) For Roof Beams

F) For Roof Slab 6" thick

G) For Kodangai

Supplying & fixing in position the following steel bars for all RCC works including cost and conveyance of steel to work site and including straightening,cutting, bending, hooking, lapping or welding where required and placing in position, tying with binding wire of approved quality and gauge including cost of binding wire, anchoring to the adjoining members wherever necessary etc., complete as per design specifications and directions.

Brick Masonary in C.M (1:6)using well burnt country bricks from approved kiln including cost and conveyance of all materials, labour charges, curing, lift charges etc.,complete for Super structure

Plastering with C.M(1:3)12mm thick using good river sand including cost and conveyance of all materials screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete. For Ceiling

Plastering with C.M(1:5) 12mm thick using good river sand including cost and conveyance of all materials screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete. For Inside

Plastering with C.M(1:5) 20mm thick using good river sand including cost and conveyance of all materials screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete. For Outside

Ornamental Plastering with CM (1:3) 20mm thick and CM (1:2) 12mm thick with required ornamentation rendering nealty with cement and using fine veriety of sand including cost and conveyance of cement and all other materials to work spot labour charges curing etc., complete A) Above Sthambhavargam Level (2nd class)

C) For Pushpa Potikas

Flooring with Double Charges/MultiCharged Vetrified floor tiles coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Edge Cut Rectified Ceramic tiles 7.30mm thick, 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing Dadooing/Skerting to internal walls with Glazed plain colour tiles 1st quality of size not less than 300x200mm with borders as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Providing cladding to walls with Galxy Granite 18-20 mm thick upto 2.43m (Premium Quality) (2.43 M) other than black and regular colours, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Supply and fixing doors as per drawings with ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter etc., complete

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM . Door Frame section of 63.5 x 100MM .The two Vertical members are to be joined together with the horizontal member using 8 x 75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine .The ready/assembled door frame is fixed to the wall using holdfast or bolt fasteners.A minimum of 4No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing of 28 -30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Providing and applying of synthatic plastered putty to prepare the surface even and smooth including cost and conveyance of all materials and labour charges etc., complete

Providing and fixing factory made UPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Supplying & Fixing of S.S.T-304 Grade Grills of any design for Doors and Windows including fabrication and fixing charges etc. complete.

Supplying and fixing of Gyp fine line grid false ceiling in size 600 x 600 mm using thick Gyp board sheet including to work spot labour charges etc. complete

Painting with best Emulsion Paint two coats over primary coat including cost and conveyance of cement and lall other materials to work spot labour charges, curing etc., complete

Supply and fixing of 25mm dia of 2mm thick PVC pipe concealled in wall with all required accessories to workspot labour etc., complete

Supply and run of 3 run of 2.5 Sqm FR PVC insulated flexible copper cable including labour etc., complete.

Supply and run of 2 run of 4.0 Sqm FR PVC insulated flexible copper cable including labour etc., complete.

Supply and run of 2 run of 6.0 Sqm FR PVC insulated flexible copper cable including labour etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch 2 way switch , Ceiling rose and Surface type Moduar Box covering to switch control box for light, fan points for stair way connection including cost and conveyance of all materials to work spot labour etc.( Taking out Six Points)

Supply and fixing of 6A 3 pin wall plug socket - 2 Nos and with 6A switch control on a different switch board including cost and conveyance of all materials to work spot labour etc., complete.

Supply and fixing of 16A to 32A Switch control on a common switch board including cost and conveyance of all materials to work spot labour etc., complete.

Supply and fixing of Batten holder with 90watts bulb including cost and conveyance to workspot labour etc., complete.

Supply, Transportation and fixing of 24 watts 1200mm length LED Batten Tubelight including cost and conveyance to workspot labour etc., complete.

Supply and fixing of Modular type Fan including cost and conveyance to workspot labour etc., complete.

Supply and fixing of Modular type Fan Regulator including cost and conveyance to workspot labour etc., complete.

Supply and fixing of Ceiling Lights including cost and conveyance to workspot labour etc., complete.

Supply and fixing of fuse indicator including cost and conveyance to workspot labour etc., complete.

Supply and fixing of 4mode MCB with 16-32 amp mcb-2,10amp mcb-1 including cost and conveyance to workspot labour etc., complete.

Supply and fixing of 4mode MCB with 16-32 amp mcb-3,10amp mcb-1 including cost and conveyance to workspot labour etc., complete.

Supply and fixing of 16way TPN Distribution board with 4Pole 63Amp Isolator-1, 2Pole 63Amp Isolator-1, 40Amp isolator-1, 63Amp fuse -4 including cost and conveyance to workspot labour etc., complete.

Supply and fixing of 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/R-410A,COP not less than 4.5 including cost and conveyance to workspot labour etc., complete.

Supply and fixing of CPVC including cost and conveyance to Work Spot Labour etc., Complete A) 3/4" CPVC Pipe

B) 1" CPVC Pipe

C) 1 1/2" CPVC Pipe

Supply and fixing of SWR Pipes PVC including cost and conveyance to Work Spot Labour etc., Complete A) 75mm PVC Pipe

B) 110mm PVC Pipe

Supply and fixing of PVC Spacials including cost and conveyance to workspot labour etc., complete. A) 110mm L-Bow

B) 110mm Double T

E) 75mm Double T

G) 4" Floor Trap

I) 1 1/2" Nipple

K) 1 1/2" Ball Valve

Supply, Installation and Commissioning approved floor mounted close coupled EWS Suit with internal parts of Dual Flush, Ultra Solid Seat cover abd 15mm angle stap cock 450mm long including cost and conveyance to workspot labour etc., complete.

Supply and fixing of Indian make Wash Hand basin ISI marks including cost and conveyance of all materials to work spot labour etc.

Supply and fixing of heavy duty 12.7mm dia Taps ISI marks including cost and conveyance of all materials to work spot labour etc. Long Body Taps

Supply and fixing of angle cock including cost and conveyance to workspot labour etc., complete.

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work.

2) Construction of Dhyana Mandiram (First Floor) in the Premises of Sri Prasanna Venkateswara Swamy Temple

V.R.C.C(1:1 1/2:3) using 20mm HBG crushed metal with necessary reinforcement including cost and conveyance of all materials, labour for mixing, laying, vibrating, curing etc., complete but excluding cost and fabrication of steel A) For Columns

C) For Roof Beams

D) For Roof Slab 6" thick

Supplying & fixing in position the following steel bars for all RCC works including cost and conveyance of steel to work site and including straightening,cutting, bending, hooking, lapping or welding where required and placing in position, tying with binding wire of approved quality and gauge including cost of binding wire, anchoring to the adjoining members wherever necessary etc., complete as per design specifications and directions.

Brick work in C.M(1:5) using 2nd class bricks iccluding cost and conveyance of cement and all other materials to work spot, labour charges, curing etc., complete

Providing weather proof course plastering with CM (1:3) 20mm thick mixed with accoproof including cost and conveyance of cement and all materials to work spot labour charges, curing etc., complete over Roof slab

Plastering with C.M(1:3)12mm thick using good river sand including cost and conveyance of all materials screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete. For Ceiling

Plastering with C.M(1:5) 12mm thick using good river sand including cost and conveyance of all materials screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete. For Inside

Plastering with C.M(1:5) 20mm thick using good river sand including cost and conveyance of all materials screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specification etc., complete. For Outside

Flooring with Double Charges/MultiCharged Vetrified floor tiles coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Edge Cut Rectified Ceramic tiles 7.30mm thick, 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing Dadooing/Skerting to internal walls with Glazed plain colour tiles 1st quality of size not less than 300x200mm with borders as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Providing cladding to walls with Galxy Granite 18-20 mm thick upto 2.43m (Premium Quality) (2.43 M) other than black and regular colours, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Supply and fixing doors as per drawings with ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter etc., complete

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM . Door Frame section of 63.5 x 100MM .The two Vertical members are to be joined together with the horizontal member using 8 x 75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine .The ready/assembled door frame is fixed to the wall using holdfast or bolt fasteners.A minimum of 4No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing of 28 -30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Providing and applying of synthatic plastered putty to prepare the surface even and smooth including cost and conveyance of all materials and labour charges etc., complete

Providing and fixing factory made UPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Supplying & Fixing of S.S.T-304 Grade Grills of any design for Doors and Windows including fabrication and fixing charges etc. complete.

Supplying and fixing of Gyp fine line grid false ceiling in size 600 x 600 mm using thick Gyp board sheet including to work spot labour charges etc. complete

Painting with best Emulsion Paint two coats over primary coat including cost and conveyance of cement and lall other materials to work spot labour charges, curing etc., complete