RC 2 Phase 2 - One Year RC For various roads under roads section Peermade in Idukki district- 5 road stretches for a length of km 27.76

Amount

APPENDIX-A Reactive Maintenance( Initial Rectification works)

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD42874/2024-2025:Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 of MORD.Type A :- By Manual Means

OD42914/2024-2025:Providing and fixing R.C board. of Fabricated steel work by using ISA 25x25x5 mm and MS sheet of 0.5 mm thick including all charges of materials and all labour charges, fabrication , conveyance, fixing painting vinyl sticker letter work etc, complete as per direction of departmental officers

APPENDIX-B Pre-Monsoon works)

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

OD42951/2024-2025:Engaging JCB for removal of raised berm , clearing of drains , other obstructions and minor land slides in the PWD road including fuel charges , bata for driver and all other expenditure etc complete

OD42952/2024-2025:Engaging tipper for removing earth and other unusable materials from road including fuel charges, and other expenses etc complete

OD42959/2024-2025:engaging Labour for cutting of fallen trees , clearing of water blockage in road , drains , eviction of minor encroachments, rectifying with shelmac , and various other works

OD42964/2024-2025:Procuring and supplying of approved quality ready mixed cold bituminous compound or equivalent potholes filling works , including cost conveyances , loading and unloading , packing of 25 kg etc complete

OD43050/2024-2025:Raising the slabs the footpath , clearing the drain and relaying the slabs back in position without causing damages as per direction of departmental staff

3.24.A:Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil by mechanical Means to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 metres (average lead 25 metres)<br>

55.15:Refurbishment of existing signboards<br>Refurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

10.2:Maintenance of Earthen Shoulder (filling with fresh soil) Making up the loss of material/ irregularities on the shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.

2.1.1:Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit.<br> Girth from 300 mm to 600 mm

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer - (Without formwork) <br>

APPENDIX-C Proactive / Preventive Maintanence

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD43062/2024-2025:Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 of MORD.Type A :- By Manual Means

OD43071/2024-2025:Engaging labour with passenger car not less than 1000 cc for conducting and reporting routine inspection for 20 kms in frequency of 7 days throughout the entire span of project work

APPENDIX-D Emergency works

3.32:Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres.

3.33:Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres.

10.11:Removal of earth from the choked hill side drain and disposing it on the valley side manually

10.12:Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side

3.24.A:Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil by mechanical Means to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 metres (average lead 25 metres)<br>

OD43076/2024-2025:engaging Labour for cutting of fallen trees , clearing of water blockage in road , drains , eviction of minor encroachments, rectifying with shelmac , and various other works

OD43077/2024-2025:Engaging tipper for removing earth and other unusable materials from road including fuel charges, and other expenses etc complete

OD43078/2024-2025:Engaging JCB for removal of raised berm , clearing of drains , other obstructions and minor land slides in the PWD road including fuel charges , bata for driver and all other expenditure etc complete

Bidder Name

Jose Prince