TMGP 2026-27 LRRP 2024-25 Adoor LAC SL No 2947 Mundackalpadi palam Chembalamannil Sreevasudevan Road

3.2:Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

OD535859/2025-2026: : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., All kinds of soil

2.15:Dismantling of Cement Concrete Pavements as per Technical Specification Clause 202. Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD535843/2025-2026:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD522032/2025-2026:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 WITHOUT FORMWORK I. P.C.C grade M 10 (i) Nominal mix 1:3:6

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

OD22775/2026-2027:Providing and fixing of direction and place identification retro-reflectorisedsign with 7 yrs warranty manufactured as per IRC 67 made of Type 4 micro prismatic grade sheeting fixed over aluminium sheeting,2mm thick/aluminium compasite panneling sheeting 4mm thick with area not exceeding 0.90m2,with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB-2Nos confirmig to IS1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concretemin size 40x40x60 cm ,60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved draing and clause 801 including lettering symbols etc(Derived from MoRD spec 10.3.A.2)