Balance Work for Construction of DIC Office Building and Modification or Renovation of Existing Office Building at SAIL DSP, Durgapur under risk and cost of original contractor

Bill of Quantity

Name of Work : Balance Work for Construction of DIC Office

Building and Modification/ Renovation of Existing Office

Building at SAIL-DSP, Durgapur under risk and cost of original

Sl. No. Description of items Amount

1 Total Amount of BOQ 3,83,71,286.48

1 Total Amount of BOQ 3,83,71,286.48

2 Less @5.4% tender premium 20,72,049.48

3 Gross Total Amount 3,62,99,237.00

3 Gross Total Amount 3,62,99,237.00

Digitally signed by SILKI

Bill of Quantity

Name of Work : Balance Work for Construction of DIC Office Building and Modification/ Renovation of Existing Office Building at

SAIL-DSP, Durgapur under risk and cost of original contractor.

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Earth work in excavation by mechanical

means (Hydralic excavator/manual

means)over areas (exceeding 30cm in

depth. 1.5m in width as well as 10 sqm on

plan) including getting out and disposal of

excavated earth, lead upto 50m and lift

upto 1.5m, as directed by Engineer - in

2.2 2.7.3 Hard rock (blasting prohibited) Cum 1,432.95 10.00 14,329.50

Excavating trenches of required width for

pipes, cables, etc. including excavation for

sockets, and dressing of sides, ramming of

3 2.10 bottoms, depth upto 1.5m including getting - -

out the excavated soil, and then returning

the soil as required, in layers not exc All

Pipes, cables, etc. exceeding 80mm dia but

not exceeding 300mm dia.

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding

20cm in depth, consolidating each

deposited layer by ramming and watering,

lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand

5 2.27 under floors, including watering, ramming, Cum 2,123.75 - -

consolidating and dressing complete.

Surface dressing of the ground including

removing vegetation and inequalities not

6 2.28 exceeding 15 cm deep and disposal of - -

rubbish, lead up to 50 m and lift up to 1.5

Supplying chemical emulsion in sealed

containers including delivery as specified

Chlorpyriphos/ Lindane emulsifiable

concentrate of 20%

Diluting and injecting chemical emulsion

for POST-CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical

Along external wall where the apron is not

provided using chemical emulsion @ 7.5

litres / sqm of the vertical surface of the

substructure to a depth of 300mm

including excavation channel along the wall

& rodding etc. complete: With

Chlorpyriphos/ Lindane E.C. 20% with 1%

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Treatment of soil under existing floors

using chemical emulsion @ one litre per

hole, 300 mm apart including drilling 12

mm diameter holes and plugging with

cement mortar 1 :2 (1 cement : 2 Coarse

sand) to match the existing floor:

With Chlorpyriphos/Lindane E.C. 20% with

1% concentration

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - All work

up to plinth level :

1 :3:6 (1 Cement : 3 coarse sand (zone-Ill)

10.1 4.1.5 natural sources : 6 graded stone aggregate Cum 7,294.70 0.05 356.46

size derived from natural sources)

Providing and laying damp-proof course

50mm thick with cement concrete 1:2:4 (1

cement : 2 coarse sand (zone-III) derived

from natural sources : 4 graded stone

aggregate 20mm nominal size derived from

natural sources).

Extra for providing and mixing water

proofing material in cement concrete work Per 50 kg

in doses by weight of cement as per cement

manufacturer's specification.

Providing & applying a coat of residual

petroleum bitumen of grade of VG-10 of

approved quality using 1.7kg per square

metre on damp proof course after cleaning

the surface with brushes and finally with a

piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of

cement concrete 1:3:6 (1 cement : 3 coarse

sand (zone - III) : 6 graded stone aggregate

20 mm nominal size) over 75mm thick bed

14 4.17 of dry brick ballast 40 mm nominal size, Sqm 749.30 45.00 33,718.50

well rammed and consolidated and

grouted with fine sand, including necessary

excavation, levelling & dressing & finishing

the top smooth.

Centering and shuttering including

15 5.9 strutting, propping etc. and removal of - -

Foundations, footings, bases of columns,

etc. for mass concrete.

Walls (any thickness) including attached

15.2 5.9.2 pilasters, butteresses, plinth and string Sqm 842.50 6.23 5,244.56

Suspended floors, roofs, landings, balconies

and access platform.

Lintels, beams, plinth beams, girders,

bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts

Stairs, (excluding landings) except spiral-

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all

complete upto plinth level.

Thermo-Mechanically Treated bars of

grade Fe-500D or more.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all

complete above plinth level.

Thermo-Mechanically Treated bars of

grade Fe-500D or more.

Providing and laying in position ready

mixed or site batched design mix cement

concrete for reinforced cement concrete

work; using coarse aggregate and fine

aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in

recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to

18 5.33.1 improve durability and workability - -

without impairing strength; including

pumping of concrete to site of laying,

curing, carriage for all leads; but excluding

the cost of centering, shuttering, finishing

and reinforcement as per direction of the

engineer-in-charge; for the following

grades of concrete. Note: Extra cement up

to 10% of the minimum specified cement

content in design mix shall be payable

Concrete of M25 grade with minimum

cement content of 330 kg /cum

All works above plinth level upto floor V

Concrete of M25 grade with minimum

cement content of 330 kg /cum

Add for using extra cement in the items of

20 5.35 design mix over and above the specified quintal 733.50 - -

cement content therein.

Brick work with common burnt clay F.P.S.

21 6.1 (non modular) bricks of class designation - -

7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse

Brick work with non modular fly ash bricks

conforming to IS:12894, class designation

22 6.34 10 average compressive strength in super - -

structure above plinth level up to floor V

Cement mortar 1:6 (1 cement : 6 Coarse

Half brick masonry with non modular fly

ash bricks of class designation 10,

conformingio IS :12894, in super structure

above plinth and upto floor V level.

Cement mortar 1 : 4 (1 cement : 4 coarse

Extra for providing and placing in position

24 6.15 2 Nos 6mm dia. M.S. bars at every third Sqm 104.80 28.90 3,028.65

course of half brick masonry.

Providing and fixing M.S. grills of required

pattern in frames of windows etc. with M.S.

flats, square or round bars etc. including

priming coat with approved steel primer

all complete.Fixed to openings /wooden

frames with rawl plugs screws etc.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing circular/ Hexagonal

cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm

height, top lid of 1.5 mm thick M.S. sheet

with its top surface hacked for proper

26 10.18 bonding, top lid shall be screwed into the Each 123.60 20.00 2,472.00

cast iron/ M.S. sheet box by means of 3.3

mm dia round headed screws, one lock at

the corners. Clamp shall be made of 12 mm

dia M.S. bar bent to shape as per standard

Steel work welded in built up sections/

framed work, including cutting,

hoisting, fixing in position and applying a

priming coat of approved steel

27 10.25.1 primer using structural steel etc. as Kg 220.65 528.12 1,16,529.68

required. In stringers, treads, landings etc.

of stair cases, including use

of chequered plate wherever required, all

Providing and laying matt finished vitrified

tile of size 300x300x9.8mm having with

water absorption less than 0.5% and

conforming to IS: 15622 of approved make

in all colours and shades in for outdoor

floors such as footpath, court yard, multi

28 16.89 modals location etc., laid on 20mm thick Sqm 1,455.65 318.89 4,64,198.96

base of cement mortar 1:4 (1 cement : 4

coarse sand) in all shapes & patterns

including grouting the joints with white

cement mixed with matching pigments etc.

complete as per direction of Engineer-in-

28.1 13.4 12 mm cement plaster of mix : - -

28.2 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 343.65 - -

18 mm cement plaster in two coats under

layer 12 mm thick cement plaster 1:5 (1

29 13.11 cement : 5 coarse sand) finished with a top Sqm 518.55 611.51 3,17,097.68

layer 6 mm thick cement plaster 1:6 (1

cement : 6 fine sand).

Add or deduct for plaster drip course/

30 5.3 groove in or moulding to R.C.C. metre 78.40 108.20 8,482.88

projections.plastered surface

31 13.16 6 mm cement plaster of mix : - -

Extra for providing and mixing water

proofing material in cement plaster work

in proportion recommended by the

Finishing walls with Premium Acrylic

Smooth exterior paint with Silicone

additives of required shade New work

33 338.25 (Two or more coats applied @ 1.43 ltr/10 Sqm 171.10 747.38 1,27,877.30

sqm over and including priming coat of

exterior primer applied @ 0.90 litre/10

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Designing, fabricating, testing, installing

and fixing in position Curtain

Wall with Aluminium Composite Panel

Cladding, with open grooves for

linear as well as curvilinear portions of the

building , for all heights and all levels etc.

(a) Structural analysis & design and

preparation of shop drawings for

pressure equalisation or rain screen

principle as required, proper drainage of

34 8.32 water to make it watertight including Sqm 5,015.05 439.00 22,01,606.95

checking of all the structural and functional

(b) Providing, fabricating and supplying

and fixing panels of aluminium

composite panel cladding in pan shape in

metalic colour of approved

shades made out of 4 mm thick aluminium

composite panel material

consisting of 3 mm thick FR grade mineral

core sandwiched between

two Aluminium sheets (each 0.5 mm thick).

Providing and supplying aluminium

extruded tubular and other aluminium

sections as per the architectural drawings

and approved shop drawings , the

aluminium quality as per grade 6063 T5 or

T6 as per BS 1474,including super durable

powder coating of 60-80 microns

conforming to AAMA 2604 of required

colour and shade as approved by the

Engineer-in-Charge. ( The item includes

cost of material such as cleats, sleeves,

screws etc. necessary for fabrication of

extruded aluminium frame work. Nothing

extra shall be paid on this account). The

weight of aluminium extruded section shall

be taken for purpose of payment.

Designing, fabricating, testing, protection,

installing and fixing in position

semi (grid) unitized system of structural

glazing (with open joints) for

linear as well as curvilinear portions of the

building for all heights and all

levels, including:

(a) Structural analysis & design and

preparation of shop drawings for the

specified design loads conforming to IS 875

part III (the system must passed the proof

36 25.2 test at 1.5 times design wind pressure Sqm 3,510.50 70.00 2,45,735.00

without any failure), including functional

design of the aluminum sections for fixing

glazing panels of various thicknesses,

aluminium cleats, sleeves and splice plates

etc. gaskets, screws, toggles, nuts, bolts,

structural and weather silicone sealants,

flashings, fire stop (barrier)-

cum-smoke seals, microwave cured EPDM

gaskets for water tightness,

pressure equalisation & drainage and

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing, assembling and supplying vision

glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6

mm insulated glass (double

glazed) vision panel units of size and shape

as required and specified,

comprising of an outer heat strengthened

float glass 6 mm thick, of

approved colour and shade with reflective

soft coating on surface # 2 of

approved colour and shade, an inner Heat

37 25.3 strengthned clear float glass Sqm 3,718.70 70.00 2,60,309.00

6 mm thick, spacer tube 12 mm wide,

dessicants, including primary seal

and secondary seal (structural silicone

sealant) etc. all complete for the

required performances, as per the

Architectural drawings, as per the

approved shop drawings, as specified and

as directed by the Engineerin-

Charge. The IGUs shall be assembled in the

factory/ workshop of the

glass processor. (Payment for fixing of IGU

Extra for openable side / top hung vision

glass panels (IGUs) including

providing and supplying at site all

accessories and hardwares for the

openable panels as specified and of the

approved make such as heavy

duty stainless steel friction hinges, min 4 -

point cremone locking sets with stainless

steel plates, handles, buffers etc. including

necessary stainless steel screws/ fasteners,

nuts, bolts, washers etc. all complete as per

the Architectural drawings, as per the

approved shop drawings, as specified and

as directed by the Engineer- in-Charge.

Providing and fixing of Aluminium vertical

fabricate Using Aluminium tube 50X50MM

rate includes all

hardware ,fastener and strengthening

arrangement as per

approval of the Engineer-in charge, all

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Designing, supplying, fabricating and

erecting in position, point

fixed glass for canopy with 8MM clear Float

toughened + 1.5 to

PVB Clear laminated + 8MM clear Float

toughened glass of Saint

Gobain/Equivalent Make. The system

should be designed to

withstand the wind pressure of 160

KG/SQ.MTR confirms to IS

875-1987(Part III). The entire glazed

40 MR -2 canopy will be flush on the Sqm 12,335.00 7.10 87,578.50

label and SS spider fitting in true line and

slope. All holes in the

glass shall be drilled in cone shape. All the

glass expansion joints

to be sealed with clear UV proof structural

silicon sealant. All the

gap between glass to be sealed, whether

sea land. The cost

include all labour materials, bolts, and nuts

Tools tackles hosting

machines. Equipment’s, transportation, etc.

Providing and fixing MS WORK incliding

primer one coat & enalam paint two coat.

complete as per direction of Engineer-in-

Providing and fixing double scaffolding

system (cup lock type) on the

exterior side, up to seven story height

made with 40 mm dia M.S. tube

1.5 m centre to centre, horizontal & vertical

tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies,

M.S. clamps and M.S. staircase system in

the scaffolding for working platform etc.

and maintaining it in a serviceable

condition for the required duration as

42 14.72 approved and removing it there after. The Sqm 338.25 - -

scaffolding system shall be stiffened with

bracings, runners, connection with the

building etc wherever required for

inspection of work at required locations

with essential safety features for the

workmen etc. complete as per directions

and approval of Engineer-in-charge. The

elevational area of the scaffolding shall be

measured for payment purpose.

The payment will be made once

irrespective of duration of scaffolding.

Providing and laying water proofing

treatment in sunken portion of WCs,

43 22.5 bathroom etc., by applying cement slurry - -

mixed with water proofing cement

compound consisting of applying :

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

(a) First layer of slurry of cement @ 0.488

kg/sqm mixed with

water proofing cement compound @ 0.253

kg/ sqm. This layer will be allowed to air

cure for 4 hours. (b) Second layer of slurry

of cement @ 0.242 kg/sqm mixed with

43.1 22.5 water proofing cement compound @ 0.126 SQM 617.05 18.18 11,216.12

kg/sqm. This layer will be allowed to air

cure for 4 hours followed with water curing

for 48 hours. The rate includes preparation

of surface, treatment and sealing of all

joints, corners, junctions of pipes and

masonry with polymer mixed slurry.

Providing & laying integral cement based

water proofing treatment including

preparation of surface as required for

treatment of roofs, balconies, terraces etc

consisting of following operations: a)

Applying a slurry coat of neat cement using

2.75kg/sqm of cement admixed with water

proofing compound confirming to IS. 2645

and approved by Engineer-in-charge over

the RCC slab including adjoining walls upto

300mm height including cleaning the

44 22.7 surface before treatment. b) Laying brick - -

bats with mortar using broken bricks/brick

bats 25mm to 115mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse

sand ) admixed with water proofing

compound confirming to IS : 2645 and

approved by Engineer-in-charge over 20

mm thick layer of cement of 1:5 ( 1 cement

: 5 coarse sand ) admixed with water

proofing compound confirming to IS : 2645

and approved by Engineer-in-charge to

required slope and treating similarly the

With average thickness of 120mm and

minimum thickness at khurra as 65mm.

Providing, fixing, and installing, 6

passenger Lift well size - 1550 mm (W) x

1550 mm (D), No. of Stops 03, Openings-

03, Ground Floor to Second Floor 3.3 m ht.

Clear Door Opening- 700mm x 2000mm,

Speed of Lift - 0.6 M/s, Automatic rescue

device, etc., with all necessary features,

machine room Less, finish Side walls:

Painted Pearl White, Rear wall: Painted

45 MR-4 Saffron yellow, Front wall: Painted Pearl Each 13,62,440.00 1.00 13,62,440.00

White, Handrail Round Bend Handrail.

Painted Traffic Black at Rear Wall, Ceiling &

Lighting Integrated roof LS5 (RL5F)

Painted Pearl White

[TYP_CAR_LIGHTING(LS5)]

Flooring 3 mm Pattern (PVC) Dark Grey

Marble Pattern all complete as per

specification and instruction of Engineer in

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supplying and laying true to line and level

Double Charge Vitrified Tiles of approved

brand conforming to IS 15622: 2006

(Group B I a) and tested as per IS

13630:2006 (relevant parts) [Non-modular

sizes for tiles with Water Absorption (av.) ≤

0.08 %] in floor, skirting etc. set in 20 mm

thick sand cement mortar (1:4) bed

prepared after application of slurry using

1.75Kg of cement per Sqm over the base

and 2mm thick cement slurry using cement

46 MR @2.91Kg./sqm at the back side of the tiles - -

and laid over the mortar bed using 0.2

kg/sqm of White cement used for joint

filling with approved pigment as directed

and removal of wax coating of top surface

of tiles with warm water and polishing the

tiles using soft and dry cloth upto mirror

finish complete including the cost of

materials,Iabour and all other incidental

charges complete true to the

manufacturer's specification and direction

of Engineer-in-Charge.

Size not Iess than 800mm X 800 mm X 10.2

Size not Iess than 600mm X 600 mm X 9.5

Extra for epoxy grouting materials for

filling joints including spacer-2 mm.

Providing and fixing 1st quality ceramic

glazed wall tiles conforming to IS: 15622

(thickness to be specified by the

manufacturer), of approved make, in all

colours, shades except burgundy, bottle

green, black of any size as approved by

49 MR Engineer-in-Charge, in skirting, risers of Sqm. 1,267.95 93.01 1,17,930.76

steps and dados, over 12 mm thick bed of

cement mortar 1 :3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in

white cement mixed with pigment of

matching shade complete.

Providing and laying Vitrified tiles in floor

in different sizes (thickness to be specified

by the manufacturer) with water

absorption less than 0.08% and

conforming to IS: 15622, of approved

brand & manufacturer, in all colours and

shade, laid on 20 mm thick cement mortar

1 :4 (1 cement: 4 coarse

sand) jointing with grey cement slurry

@3.3 kg/sqm including grouting the joints

50 MR with white cement and matching pigments Sqm. 1,464.85 25.46 37,299.62

etc. The tiles must be cut

with the zero chipping diamond cutter only

. Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required

thickness, leveling system and rubber

mallet for placing the tiles gently and

Glazed Vitrified tiles Matt Antiskid

finish of size Size of Tile 600 x

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supplying, fitting & fixing granite slab

15mm to 18mm thick in floor, lobby, stair,

landing and treads etc. over 20mm(avg)

thick base of cement mortar (1:2) laid with

white cement slurry @4.40 Kg per square

meter before placing of granite and jointed

with white cement slurry @ 2.0 Kg per

square meter with necessary pigments and

complete as per direction of Engineer-in-

Charge including cost of all materials,

labours, curing and roughening of concrete

surface complete.

Cost of labour for prefinished and

52 MR premoulded Nosing to treads of steps, Rmt. 258.00 200.00 51,600.00

railing, window sill etc. of granite/stone.

Providing and fixing machine cut, mirror

polished, Italian Marble stone 18 mm thick

(Imported quality, such as Perlato,

Bottichino, Crema, Antique Beige, Dark

Emperadore, Red Verona, Black Marquino

etc.) in dado/wall laid in required pattern

in linear portion of the building all

complete as per architectural drawings

with Italian Marble stone slab laid over

15mm (average) thick base of cement

mortar 1 : 2 (1 cement : 2 coarse sand)

53 MR including making suitable arrangements to Sqm. 5,843.00 7.00 40,901.00

hold the stones properly by brass / copper

hooks applying white cement [email protected]

kg/sq.m the back site of marble and

pointing with cement mortar (1:2) (1

cement : 2 marble dust) admixed with

pigment to match the marble shade

including rubbing, curing and polishing etc.

all complete as specified and as directed by

the Engineer-in-Charge including cost of

materials, labours, scaffolding, staging,

curing complete.

Cost of labour for prefinished and

54 MR premoulded window sill of Italian Marble Rmt. 261.00 15.00 3,915.00

Providing and fixing M.F. suspended ceiling

made with 12.5 mm thick Gypsum plaster

board including G.I. perimeter channel of

0.55 mm flush (having two flanges 20 mm

and 30 mm respectively and web 27 mm )

along with perimeter of ceiling with G.I.

intermediate channel of 0.9 mm thick size

45 mmx15mm placed at 750 mm c/c with

G.I. ceiling angle of size 25 mmx10mmx0.55

mm thick fixed to the ceiling with G.I. Cleat

and steel expansion fastener ceiling section

fixed to the intermediate channels with the

help of connecting clip and in the direction

of perpendicular to the intermediate

channel of 300 mm c/c 12.5 mm thick

Gypsum plastered board are to be fixed

under ceiling section as above by machine

screws. The boards are to be joined and

finished with jointing compound, paper

tape and application of top coat etc. as per

the direction of Engineer-in-Charge. (The

rate includes of cost of all materials

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing decorative false

ceiling, framework made with 25 x 50 mm

aluminium extruded section of wall

thickness 1.5 mm fixed from true ceiling

with aluminium L cleat 25 x 25 mm.

Framework to be done at spacing not

exceeding 600 mm c/c both ways. Paneling

surface to be done with 12 mm thick BWP

56 MR grade solid plywood conforming to IS:710, Sqm. 4,950.00 135.00 6,68,250.00

complete as per design and direction of

Engineer-in-Charge. Plywood surface to be

fixed and finished with PVC interlocking

planks 8 mm thick made in honey-comb

construction of width 200/250 mm. The

rate includes cost of material, accessories,

labour, scaffolding and all incidental

Providing and fixing wall/column paneling,

framework made with 25 x 50 mm

aluminium extruded section of wall

thickness 1.5 mm fixed on masonary

surface with aluminium L cleat 25 x 25 mm.

Framework to be done at spacing not

57 MR exceeding 600 mm c/c both ways. Paneling Sqm. 4,850.00 30.00 1,45,500.00

surface to be done with 12 mm thick BWP

grade solid plywood conforming to IS:710,

complete as per design and direction of

Engineer-in-Charge. The rate includes cost

of material, labour, scaffolding and all

incidental charges.

Providing and fixing decorative lamination

conforming to IS: 2046 : 1995 as per

approved make, brand, finish and thickness

with fitting, fixing the same on plywood

with recommended / approved adhesive

58 MR with proper clipping the sides for better Sqm. 688.00 95.00 65,360.00

attachment as per design and direction of

Engineer-in-Charge. The rate includes the

cost of material, labour, scaffolding,

adhesive and all incidental charges.

Thickness of laminate - 1 mm.

Providing and fixing door

hardware/fittings from decorative range of

approved make Godrej/Ozone/Dorset for

solid core flush door consisting of 1 no.

medium duty hydraulic door closure, single

lever mortise lock with pair of handles in

SS matt finish, 1 no. of door stopper in SS

matt finish, 1 no. of tower bolt (6") and 4

nos. of hinges (4") in SS 304 grade, all

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supplying, fitting and fixing solid flush type

doors of commercial quality, the timber

frame consisting of top and bottom rails

and side styles of well seasoned timber 65

mm wide each and the entire frame fitted

with 37.5 mm wide battens places both

ways in order to make the door of solid

60 MR core and internal lipping with Garjan or Sqm. 2,659.00 4.00 10,636.00

similar wood veneers using phenol

formaldehyde as glue etc. complete,

including fitting, fixing shutters in position,

all complete as per direction of Engineer-in-

Charge. 32 mm thick shutters (single leaf)

with vision aperture with 5mm thick glass

pane with wooden beads.

Providing Wood work with Malayasian Sal

in door and window frame fitted and fixed

in position complete including a protective

coat of painting at the contact surface of

the frame exluding cost of concrete, Iron

Butt Hinges and M.S clamps.

Removing loose scales, blisters etc. from

old painted surface and thoroughly

smoothening the surface to make the same

suitable for receiving fresh coat of paint.

Rendering the surface of walls and ceiling

with white cement based wall putty of

63 MR approved make and brand (1.5mm thick), Sqm. 110.00 1,150.00 1,26,500.00

complete to the entire satisfaction of

Engineer-in-Charge.

Providing and applying water based

interior grade Acrylic Primer of approved

quality and brand, 2 coats on plastered or

concrete surface old or new surface to

64 MR receive acrylic emulsion paint including Sqm. 45.00 1,150.00 51,750.00

scraping and preparing the surface

throughly, complete as per manufacturer's

specification and as per direction of

Engineer-in-Charge.

Providing and applying Acrylic Emulsion

Paint of approved make and brand, 2 coats

on walls and ceiling including sand

papering in intermediate coats including

putty to the entire satisfaction of Engineer-

Providing and applying protective and

decorative Textured exterior high class

matt finish paint, 2 coats of approved

quality, composed of special Tharmoplastic

Resin containing fine crystalline additives

66 MR derive from Granite as per manufacturer's Sqm. 101.00 50.00 5,050.00

specification and as per direction of EIC to

be applied over acrylic primer as required.

The rate includes cost of material, labour,

scaffolding and all incidental charges but

excluding the cost of primer.

Priming one coat on steel or other metal

surface with synthetic oil bound primer of

approved quality including smoothening

surfaces by sand papering etc.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and painting with best quality

synthetic enamel paint of approved make

and brand, 2 coats on steel or other metal

68 MR surface including smoothening surface by Sqm. 79.00 50.00 3,950.00

sand papering etc. including using of

approved putty etc. on the surface, if

Supply and installation of Window Blinds

69 MR with screen fabric, including the cost of Sqm. 1,635.00 30.00 49,050.00

fabric, roller, accessories all complete.

Providing and fixing full glazed reamless

sliding door with 12 mm clear toughened

glass conforming to IS: 2553-1992 (Part-II)

operated on automatic sliding mechanism

of Godrej/Dorma/Hafele, all complete as

per direction and approval of Engineer-in-

Charge. Door size - 2200 mm x 2100 mm

Providing and fixing full glazed reamless

door with 12 mm thick clear toughened

glass conforming to IS: 2553-1992 (Part-II)

mounted on heavy duty hydraulic action

floor spring with top and bottom pivot

assembly, fitted with SS lock and pair of SS

handles (600 mm x 32 mm), all complete as

per direction and approval of Engineer-in-

Charge. Double leafs - 1800 mm x 2100 mm

Providing, fabricating and fixing SS Railing

950 mm high (above the finished floor)

with 50 mm dia. x 2 mm thick SS 304 grade

pipe as top hand rail main runner and 50

72 MR mm x 50 mm x 2 mm thick bottom runner Rmt. 11,600.00 48.00 5,56,800.00

housing 12 mm thick clear toughened glass

with necessary supports, plates, anchor

fasteners, supports as per design and

direction of Engineer-in-Charge.

Providing, fabricating and fixing in position

SS Hand Rail along walls with main bar 40

mm dia. x 2 mm thick SS 304 grade pipe

with all necessary fittings as the main

73 MR runner joined to 25 mm dia. SS pipe and Rmt. 4,750.00 48.00 2,28,000.00

vertical bracket 2 mm thick held on to

walls by means of fasteners, base plates @

every 1050 mm c/c complete as per design

and direction of Engineer-in-Charge.

Providing and fixing sandwiched acrylic

panel with 2 layers of acrylic sheets of

imported quality, first layer with 4 mm

thick acrylic sheet and 6 mm thick acrylic

sheet on top with bevelled edges on all

sides. Panel to be mounted on

wall/partition with SS studs (25 mm dia. x

25 mm), all complete as per design.

Supplying FRP Planter Box, size - 30" x 10"

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing mirror of extra clear

quality, 6 mm thick fixed on existing

wall/partition with SS studs (25 mm dia. x

25 mm). Mirror edges on all sides to be

polished as per direction of Engineer-in-

Supplying and laying true to line and level

Double Charge Vitrified Tiles of approved

brand conforming to IS 15622: 2006

(Group B I a) and tested as per IS

13630:2006 (relevant parts) [Non-modular

sizes for tiles with Water Absorption (av.) ≤

0.08 %] in floor, skirting etc. set in 20 mm

thick sand cement mortar (1:4) bed

prepared after application of slurry using

1.75Kg of cement per Sqm over the base

and 2mm thick cement slurry using cement

77 MR @2.91Kg./sqm at the back side of the tiles - -

and laid over the mortar bed using 0.2

kg/sqm of White cement used for joint

filling with approved pigment as directed

and removal of wax coating of top surface

of tiles with warm water and polishing the

tiles using soft and dry cloth upto mirror

finish complete including the cost of

materials,Iabour and all other incidental

charges complete true to the

manufacturer's specification and direction

of Engineer-in-Charge.

Size not Iess than 800mm X 800 mm X 10.2

Size not Iess than 600mm X 600 mm X 9.5

Extra for epoxy grouting materials for

filling joints including spacer-2 mm.

Providing and fixing 1st quality ceramic

glazed wall tiles conforming to IS: 15622

(thickness to be specified by the

manufacturer), of approved make, in all

colours, shades except burgundy, bottle

green, black of any size as approved by

79 MR Engineer-in-Charge, in skirting, risers of Sqm. 1,267.95 156.38 1,98,285.57

steps and dados, over 12 mm thick bed of

cement mortar 1 :3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in

white cement mixed with pigment of

matching shade complete.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and laying Vitrified tiles in floor

in different sizes (thickness to be specified

by the manufacturer) with water

absorption less than 0.08% and

conforming to IS: 15622, of approved

brand & manufacturer, in all colours and

shade, laid on 20 mm thick cement mortar

1 :4 (1 cement: 4 coarse

sand) jointing with grey cement slurry

@3.3 kg/sqm including grouting the joints

with white cement and matching pigments

etc. The tiles must be cut

with the zero chipping diamond cutter only

. Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required

thickness, leveling system and rubber

mallet for placing the tiles gently and

easily. Glazed Vitrified tiles

Matt Antiskid finish of size

Size of Tile 600 x 600 mm

Providing and fixing machine cut, mirror

polished, Italian Marble stone 18 mm thick

(Imported quality, such as Perlato,

Bottichino, Crema, Antique Beige, Dark

Emperadore, Red Verona, Black Marquino

etc.) in dado/wall laid in required pattern

in linear portion of the building all

complete as per architectural drawings

with Italian Marble stone slab laid over

15mm (average) thick base of cement

mortar 1 : 2 (1 cement : 2 coarse sand)

81 MR including making suitable arrangements to Sqm. 5,843.00 7.00 40,901.00

hold the stones properly by brass / copper

hooks applying white cement [email protected]

kg/sq.m the back site of marble and

pointing with cement mortar (1:2) (1

cement : 2 marble dust) admixed with

pigment to match the marble shade

including rubbing, curing and polishing etc.

all complete as specified and as directed by

the Engineer-in-Charge including cost of

materials, labours, scaffolding, staging,

curing complete.

Cost of labour for prefinished and

82 MR premoulded window sill of Italian Marble Rmt. 261.00 15.00 3,915.00

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing M.F. suspended ceiling

made with 12.5 mm thick Gypsum plaster

board including G.I. perimeter channel of

0.55 mm flush (having two flanges 20 mm

and 30 mm respectively and web 27 mm )

along with perimeter of ceiling with G.I.

intermediate channel of 0.9 mm thick size

45 mmx15mm placed at 750 mm c/c with

G.I. ceiling angle of size 25 mmx10mmx0.55

mm thick fixed to the ceiling with G.I. Cleat

and steel expansion fastener ceiling section

fixed to the intermediate channels with the

help of connecting clip and in the direction

of perpendicular to the intermediate

channel of 300 mm c/c 12.5 mm thick

Gypsum plastered board are to be fixed

under ceiling section as above by machine

screws. The boards are to be joined and

finished with jointing compound, paper

tape and application of top coat etc. as per

the direction of Engineer-in-Charge. (The

rate includes of cost of all materials

Providing and fixing of false ceiling with

powder coated exposed G.I. grid

suspension system(E-GridU-1520 or

equivalent load carrying capacity with mid

span deflection not exceeding 1/360 span

with hanger spacing of 1200mmc/c)

consisting of main runner 3600 mm long,

cross Tee 1200 mm/600 mm long and wall

angle. The wall angle shall be fixed on PVC

dash fasteners on the perimeter of the wall

by steel screws with distance 300 mm c/c.

84 MR The main runners to be placed @1200 mm. Sqm. 1,357.00 145.00 1,96,765.00

The cross Tee 1200 mm will be inserted in

the pre-cut slots of main runner at a

regular interval of 600 mm to form a

modular grid of 1200 mm X 600 mm.

Additional cross Tees of 600 mm shall be

placed perpendicular to the cross Tee 1200

mm long to finally form a grid of 600 mm X

600mm. Grid of module size 600 mm X 600

mm shall be supported by 6 mm dia G.I.

wire from purlins/soffit. 15 mm thick OW

Acoustic Board (Mineral Fiber Acoustic

Providing and fixing wall/column paneling,

framework made with 25 x 50 mm

aluminium extruded section of wall

thickness 1.5 mm fixed on masonary

surface with aluminium L cleat 25 x 25 mm.

Framework to be done at spacing not

85 MR exceeding 600 mm c/c both ways. Paneling Sqm. 4,850.00 250.00 12,12,500.00

surface to be done with 12 mm thick BWP

grade solid plywood conforming to IS:710,

complete as per design and direction of

Engineer-in-Charge. The rate includes cost

of material, labour, scaffolding and all

incidental charges.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing decorative lamination

conforming to IS: 2046 : 1995 as per

approved make, brand, finish and thickness

with fitting, fixing the same on plywood

with recommended / approved adhesive

86 MR with proper clipping the sides for better Sqm. 688.00 401.00 2,75,888.00

attachment as per design and direction of

Engineer-in-Charge. The rate includes the

cost of material, labour, scaffolding,

adhesive and all incidental charges.

Thickness of laminate - 1 mm.

Providing and fixing Grooved Acoustical

Slats Wood based MDF panels with linear

perforations. The melamine laminate in

size 2440mm x 128mm x 16mm type 28/2

i.e. having 28mm strips and 2mm groove,

tongue and groove edges for seamless

mounting having density of 600kg/m3. The

back of the panels are perforated with 8-

10mm diameter circular holes with black

acoustic fleece covering for providing

sound absorption. Panel is wooden slat will

be backed with polyester fibre 1000 gsm.

Wooden slat will be fixed on 19 x 50mm ply

strip/framework.

Providing and fixing door

hardware/fittings from decorative range of

approved make Godrej/Ozone/Dorset for

solid core flush door consisting of 1 no.

medium duty hydraulic door closure, single

lever mortise lock with pair of handles in

SS matt finish, 1 no. of door stopper in SS

matt finish, 1 no. of tower bolt (6") and 4

nos. of hinges (4") in SS 304 grade, all

Supplying, fitting and fixing solid flush type

doors of commercial quality, the timber

frame consisting of top and bottom rails

and side styles of well seasoned timber 65

mm wide each and the entire frame fitted

with 37.5 mm wide battens places both

ways in order to make the door of solid

89 MR core and internal lipping with Garjan or Sqm. 2,659.00 30.00 79,770.00

similar wood veneers using phenol

formaldehyde as glue etc. complete,

including fitting, fixing shutters in position,

all complete as per direction of Engineer-in-

Charge. 32 mm thick shutters (single leaf)

with vision aperture with 5mm thick glass

pane with wooden beads.

Providing Wood work with Malayasian Sal

in door and window frame fitted and fixed

in position complete including a protective

coat of painting at the contact surface of

the frame exluding cost of concrete, Iron

Butt Hinges and M.S clamps.

Removing loose scales, blisters etc. from

old painted surface and thoroughly

smoothening the surface to make the same

suitable for receiving fresh coat of paint.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Rendering the surface of walls and ceiling

with white cement based wall putty of

92 MR approved make and brand (1.5mm thick), Sqm. 110.00 2,600.00 2,86,000.00

complete to the entire satisfaction of

Engineer-in-Charge.

Providing and applying water based

interior grade Acrylic Primer of approved

quality and brand, 2 coats on plastered or

concrete surface old or new surface to

93 MR receive acrylic emulsion paint including Sqm. 45.00 2,600.00 1,17,000.00

scraping and preparing the surface

throughly, complete as per manufacturer's

specification and as per direction of

Engineer-in-Charge.

Providing and applying Acrylic Emulsion

Paint of approved make and brand, 2 coats

on walls and ceiling including sand

papering in intermediate coats including

putty to the entire satisfaction of Engineer-

Providing and applying protective and

decorative Textured exterior high class

matt finish paint, 2 coats of approved

quality, composed of special Tharmoplastic

Resin containing fine crystalline additives

95 MR derive from Granite as per manufacturer's Sqm. 101.00 120.00 12,120.00

specification and as per direction of EIC to

be applied over acrylic primer as required.

The rate includes cost of material, labour,

scaffolding and all incidental charges but

excluding the cost of primer.

Priming one coat on steel or other metal

surface with synthetic oil bound primer of

approved quality including smoothening

surfaces by sand papering etc.

Providing and painting with best quality

synthetic enamel paint of approved make

and brand, 2 coats on steel or other metal

97 MR surface including smoothening surface by Sqm. 79.00 110.00 8,690.00

sand papering etc. including using of

approved putty etc. on the surface, if

Supply and installation of Window Blinds

98 MR with black-out fabric, including the cost of Sqm. 1,695.00 90.00 1,52,550.00

fabric, roller, accessories all complete.

Supply and installation of Motorized Fabric

Curtain on tracks including the cost of

99 MR fabric, accessories and motor of make Sqm. 4,500.00 45.00 2,02,500.00

Somfy/equivalent with remote control.

Base rate of fabric- Rs. 1000 per rmt.

Providing and fixing sandwiched acrylic

panel with 2 layers of acrylic sheets of

imported quality, first layer with 4 mm

thick acrylic sheet and 6 mm thick acrylic

sheet on top with bevelled edges on all

sides. Panel to be mounted on

wall/partition with SS studs (25 mm dia. x

25 mm), all complete as per design.

Supplying FRP Planter Box, size - 36" x 12"

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing mirror of extra clear

quality, 6 mm thick fixed on existing

wall/partition with SS studs (25 mm dia. x

25 mm). Mirror edges on all sides to be

polished as per direction of Engineer-in-

Supplying, fitting and fixing DGU GLASS on

façade using double insulated glass unit

with exterior face of SAINT GOBAIN/AIS

make high performance heat reflective

toughened glass of 6 mm thick (with light

transmission VLT 34%, Solar factor SF 22 &

u Value 1.7w/m2/0 K) & interior glass in 6

mm clear non-heat strengthened & air gap

103 MR of 12 mm to be installed on curtain wall Sqm. 10,385.00 65.00 6,75,025.00

mullion & transom system using extruded

aluminium section make ALOM. The

section should be fixed section of 50 x 50

mm having thickness not less than 2 mm

powder coated in 40 microns in desired

colour of EPDM gaskets, silicon sealants.

(Contractor to submit manufacture's test

Providing and fixing storage cabinets,

structures made with 19 mm thick BWP

grade solid plywood conforming to IS:710.

Back surfaces fixed to the wall/partition to

be made with 6 mm thick BWP grade

plywood. Shutters and intermediate

shelves to be made with 19 mm thick BWP

grade solid plywood conforming to IS:710.

All inside surfaces to be finished with 0.7

mm thick balancer laminate and exposed

outside surfaces to be finished with 1 mm

104 MR thick decorative laminate conforming to IS: Sqm. 11,750.00 7.00 82,250.00

2046 : 1995 as per approved make, brand,

finish on plywood with recommended /

approved adhesive. Plywood edges to be

finished with 2 mm thick PVC edge banding

matching the lamination shade. The rate

includes the cost of SS hinges, handles,

locks accessories and adhesives, all

complete as per design and direction of

Engineer-in-Charge. Depth of storage - 450

mm. (For measurement purpose the face

area : length x height is to be considered)

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing pantry storage

cabinet, structures made with 19 mm thick

BWP grade solid plywood conforming to

IS:710. Back surfaces fixed to the

wall/partition to be made with 6 mm thick

BWP grade plywood. Shutters and

intermediate shelves to be made with 19

mm thick BWP grade solid plywood

conforming to IS:710. All inside surfaces to

be finished with 0.7 mm thick balancer

laminate and exposed outside surfaces to

105 MR be finished with 1 mm thick decorative Sqm. 15,600.00 5.00 78,000.00

laminate conforming to IS: 2046 : 1995 as

per approved make, brand, finish on

plywood with recommended / approved

adhesive. Plywood edges to be finished

with 2 mm thick PVC edge banding

matching the lamination shade. Top of the

storage to be provided with 18 mm thick

granite with 100 mm high splash back.

Granite edge to be moulded finished. The

rate includes the cost of SS hinges, handles,

locks accessories and adhesives, all

Providing and fixing overhead storage

cabinets, structures made with 19 mm

thick BWP grade solid plywood conforming

to IS:710. Back surfaces fixed to the

wall/partition to be made with 6 mm thick

BWP grade plywood. Shutters and

intermediate shelves to be made with 19

mm thick BWP grade solid plywood

conforming to IS:710. All inside surfaces to

be finished with 0.7 mm thick balancer

laminate and exposed outside surfaces to

106 MR be finished with 1 mm thick decorative Sqm. 11,500.00 3.00 34,500.00

laminate conforming to IS: 2046 : 1995 as

per approved make, brand, finish on

plywood with recommended / approved

adhesive. Plywood edges to be finished

with 2 mm thick PVC edge banding

matching the lamination shade. The rate

includes the cost of SS hinges, handles,

locks accessories and adhesives, all

complete as per design and direction of

Engineer-in-Charge. Depth of storage - 450

mm. (For measurement purpose the face

Wash Basin- wall hung with half

pedestal including flange, CP waste, PVC

107 MR waste, extension pipe & hanging Nos. 8,496.00 7.00 59,472.00

Cat. No: S2040163H

Cat. No: F1018101

Cat. No: F8060101

Wall hung WC with Dual Flush Cistern &

soft close seat cover including connecting

110 MR pipe, flange, extension pipe, hanging Nos. 22,107.30 5.00 1,10,536.50

accessories etc.

Cat. No: S1043147

Cat. No: F8060101

112 MR CP Angular Stop Cock Nos. 3,658.00 17.00 62,186.00

CP Tissue Paper Holder with Flap

Cera Hera F5007110

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

115 MR Tissue Paper Dispenser Nos. 9,150.90 2.00 18,301.80

Wash Basin- Granite counter top wash

basin including flange, CP waste, PVC

waste, extension pipe & accessories.

Cat. No: S2020161

Shower Unit overhead rain shower

Cat. No: F7010102SS

Diverter for Shower unit-Single lelver

concelead diverter

Wash Basin- wall hung with half

pedestal including flange, CP waste, PVC

119 MR waste, extension pipe & hanging Nos. 8,496.00 8.00 67,968.00

Cat. No: S2040163H

Cat. No: F1018101

Cat. No: F8060101

Wall hung WC with Dual Flush Cistern &

soft close seat cover including connecting

122 MR pipe, flange, extension pipe, hanging Nos. 22,107.30 8.00 1,76,858.40

accessories etc.

Cat. No: S1043147

Cat. No: F8060101

124 MR CP Angular Stop Cock Nos. 3,658.00 31.00 1,13,398.00

CP Tissue Paper Holder with Flap

Cera Hera F5007110

Urinal with Sensor including PVC

spreader, doom waste, hanging accessories

128 MR Tissue Paper Dispenser Nos. 9,150.90 4.00 36,603.60

Modular Urinal Partition 400 x 900mm in

compact laminate including all accessories.

SS Sink with drain board including flange,

CP waste, PVC waste & extension pipe.

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of

132 18.8 pipes & fittings with one step CPVC solvent - -

cement and the cost of cutting chases and

making good the same including testing of

joints complete as per direction of

Engineer in Charge.Concealed work,

including cutting chases and making good

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints

complete as per direction of Engineer in

Charge. Internal work - Exposed on wall

Supplying, fixing, testing and

commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095

of following sizes as required :

Providing and fixing PTMT Ball cock of

approved quality, colour and make

complete with Epoxy coated aluminium

rod with L.P./ H.P.H.D. plastic ball.

40 mm nominal bore, 206mm long,

weighing not less than 690 gms

50 mm nominal bore, 242mm long,

weighing not less than 1240 gms

Providing and placing on terrace (at all

floor levels) polyethylene water storage

tank, ISI : 12701 marked, with cover and

136.00 18.48 suitable locking arrangement and making per litre 11.00 10,000.00 1,10,000.00

necessary holes for inlet, outlet and

overflow pipes but without fittings and the

base support for tank.

Providing & fixing Auto Air vent for cold

137.00 NON DSR water supply risers, suitable for pressure - -

not less than 15 Kg/Sq.cm.

Providing and fixing on wall face

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

Providing and fixing on wall face

unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain

139.00 12.42 water pipes conforming to IS : 13592 Type - -

A including jointing with seal ring

conforming to IS : 5382 leaving 10 mm gap

for thermal expansion.

139.1 12.42.2 Single Push fit coupler - -

139.2 12.42.3 Single Tee with door - -

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing to the inlet mouth of

rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440

Providing and fixing unplasticised -PVC

pipe clips of approved design to

unplasticised - PVC rain water pipes by

means of 50x50x50 mm hard wood plugs,

141.00 12.43 screwed with M.S. screws of required - -

length, including cutting brick work and

fixing in cement mortar 1:4 (1 cement : 4

coarse sand) and making good the wall etc.

Making khurras 45x45 cm with average

minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate of 20 mm nominal

size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement

plaster 1:3 (1 cement : 3 coarse sand) and a

coat of neat cement, rounding the edges

and making and finishing the outlet

Point Wiring in Medium Class PVC

Conduit, with Modular type Switch:

Wiring for light point/ fan point/ exhaust

fan point/ call bell point with 1.5 sq.mm FR

PVC insulated copper conductor single core

cable in surface/recessed Medium Class

PVC conduit, with modular type switch,

modular plate, suitable size of GI box and

earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core

cable etc as required. Make FRLS PVC CU

Wire:: Havells, Finolex Lap, KEI. (Make of

Modular switch Sockets:- Havells

(ATHENA), L&T ENGLAZE), Legrand

(LYNCUS) , Anchor(WOODS), Schneider-

(OPEL) PVC Conduit:- BEC AKG Precision

Wiring for twin control light point with 1.5

sq.mm FR PVC insulated copper conductor

single core cable in surface/recessed

Medium Class PVC conduit, 2 way modular

switch, modular plate, suitable size of GI

box earthing the point with 1.5 Sq. mm FR

PVC insulated copper conductor single

core cable etc as required. FRLS CU. Wire

Make:- Havells, Finolex, Lap, KEI. (Make of

Modular switch Sockets:- Havells (New

Murano), Legrand (Myrius)) , ABB

(Millenia), Schneider-(Zencello)

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Wiring for light/power plug with 2x4

Sq.mm FR PVC insulated copper conductor

single core cable in surface/recessed

Medium Class PVC conduit along with 1 No.

4 Sq.mm FR PVC insulated copper

conductor single core cable for loop

earthing etc. as required. Make:- Havells,

Polycab, Finolex. Lap

Wiring for circuit/ submain wiring

alongwith earth wire with the following

sizes of FR PVC insulated copper condcutor,

146 D.S.R 1.14 single core cable in surface/ recessed - -

Medium Class PVC conduit as required.

Make:- Havells, KEI, Finolex Lap. PVC

Conduit:- BEC AKG Precision

S/F PVC Conduit: Supplying and fixing of

following sizes of Med Class PVP conduit

along with the accessories in surface /

recess & cutting the wall and making good

the same in case of recessed conduit as

required for TV and TEL out lets.

Supply and fixing of Metal box following

size (nominal Size) on surface or recess

147 D.S.R. 1.22 with suitable size of phenolic laminated - -

sheet cover in front including painting etc

as required. (to use as gang box )

Supplying and fixing of following switch/

socket on the existing modular plate &

switch box including connections but

excluding modular plate etc. as reqd.

148.5 1.24.6 Telephone socket outlet Each 148.00 30.00 4,440.00

148.6 1.24.7 TV antenna socket outlet Each 148.00 1.00 148.00

Supplying and fixing Stepped type

electronic fan regulator on the existing

148 D.S.R. 1.25 modular plate & switch box including Each 369.00 15.00 5,535.00

connections but excluding modular plate

Supplying and fixing modular blanking

plate on the existing modular plate &

switch box excluding modular plate as

Supply and fixing of following size/

modules, GI box along with modular base &

cover plate for modular switch/ regulator

in recess, including connection as required.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

6 module (200mmx 75mm) (for 2 nos. 6A

Sockets & 2no. 6A Switch)

Supplying and fixing suitable size GI box

with modular plate and cover in front on

surface or in recess including providing

151 D.S.R. 1.31 and fixing 3 pin 5/6 Amp modular socket Each 477.00 20.00 9,540.00

outlet and 5/6 A modular type switch,

connections painting etc. as reqd. (for Light

Supplying and fixing suitable size GI box

with modular plate and cover in front on

surface or in recess including providing

modular socket outlet and 15/16 A

modular type switch, connections painting

Supplying & fixing of 3 pin, 5 amp Ceiling

153 D.S.R. 1.33 rose on the existing junction box/ wooden Each 87.00 250.00 21,750.00

block including connection as required.

Supplying and fixing call bell/buzzer

154 D.S.R. 1.38 suitable for single phase, 230 V, complete Each 99.00 7.00 693.00

Installation, testing and commissioning of

Ceiling Fans, including wiring the down

rods of standard length (up to 30cm) with

1.5 Sq mm FRLS PVC insulated copper

conductor, single core cable and earthing

etc. as required.

Installation of exhaust fan in the existing

opening, including making good the

damage, connection, testing,

commissioning etc. as required.

Supplying and fixing following way single

pole & neutral, sheet steel, MCCB

distribution board, 240V, on surface/

recces , complete with tinned copper bus

bar, neutral bar, earth bar, din bar

interconnections, powder painted

including earthing etc. as required (But

without MCCB/RCCB/Isolator) Make:-

SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Supplying and fixing following way,

horizontal type thee pole & neutral, sheet

steel, MCCB distribution board, 415V, on

surface/ recces , complete with tinned

copper bus bar, neutral bar, earth bar, din

bar interconnections, powder painted

including earthing etc. as required (But

without MCCB/RCCB/Isolator) Make:-

SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supplying and fixing of following ways

surface/ recess mounting, vartical type,

415 V, TPN MCCB/MCB distribution board

of sheet steel, dust protected, duly powder

painted, inclusive of 200 A tinned copper

bus bar, common neutral link, earth bar,

din bar for mounting MCBs( but without

MCCBs and incomer) as required. (Note :

Vertical type MCB TPDB is normally used

where 3 phase outlets are required.) Make:-

SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Supplying & fixing 5 amps to 32 amps

rating 240/415 volts 10 kA, C curve

Miniature Circuit Breaker suitable for

inductive loads of following poles in the

160 D.S.R 2.10 existing MCB DB complete with - -

connections, testing and commissioning

etc. as required. (Make:-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA

GUARD/ L&T- AU VERSION.)

160.3 2.10.5 Triple Pole and neutral Each 1,228.00 5.00 6,140.00

Supplying & fixing following rating double

pole (Single Phase & Neutral) 240 V,

Resudual Curren Circuit Breaker (RCCB) ,

having a sensitivity current uo to 300mA in

161 D.S.R 2.14 the existing MCB DB complete with - -

connections, testing and commissioning

etc. as required. Make:-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA

GUARD/ L&T- AU VERSION.

Supplying and fixing of 20A 240V, SPN

Industrial Type soclket out let with 2 pole

and earth, metal cenclosed plug top along

with 20A "C" Series SP MCB, in sheet steel

163 D.S.R 2.18 enclosure, on surface or in recess, with Each 1,621.00 20.00 32,420.00

chained metal cover for the socket out let

and complete with connections, testing and

commissioning etc. as required. Make:-

Legrand, L&T, Siemens, Schneider.

Providing & fixing of M.V. danger notice

plate of 200 mm x 150 mm, made of mild

steel, at least 2 mm thick, and vitreous

enamelled white on both sides, and with

inscription in single red colour on front

side as required.

Earthing with G.I. Earth Pipe 4.5 Meter long

, 40mm dia including accessories, and

providing massonry enclosure with cover

plate having locking arragement and

watering pipe etc. with charcoal/cock and

salt as required. (For LT Panels)

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Earthing with copper Earth plate 600mm x

600mm x 6mm thick including accessories,

and providing masonary enclosure with

166 5.6 cover plate having locking arrangement Each 13,838.00 4.00 55,352.00

and watering pipe of 2.7 Meter long etc.

(with charcoal and salt as required). (for

Supplying and laying 25 mm X 5 mm GI

strip at 0.50 meter below ground/surface

as strip earth electrode, including

connection/ terminating with nut, bolt,

spring, washer etc. as required (Jointing

shall be done by overlapping and with 2

sets of G.I. nut bolt & spring washer spaced

Providing and fixing 4mm dia copper wire

on surface or in recess in 25 mm medium

class PVC PIPE for loop earthing as

Providing and fixing of Lightning

Conductor finial, made of 25 mm dia

300mm ling, copper tube, having single

prong at top, with 85 mm dia 3 mm thick

copper base plate including holes etc.

complete as required.

Providing and fixing G.I. Tape 20mmx3mm

thick on parapat or surface of the wall for

lightning conductor complete as required.

(for Horizontal Run).

Providing and fixing G.I. Tape 20mmx3mm

thick on parapat or surface of the wall for

lightning conductor complete as required.

(for Vertical Run).

Earthing with G.I. Earth Pipe 4.5 Meter long

, 40mm dia including accessories, and

providing massonry enclosure with cover

plate having locking arragement and

watering pipe etc. with charcoal/cock and

salt as required.

Supplying and laying 25 mm X 5 mm GI

strip at 0.50 meter below ground/surface

as strip earth electrode, including

connection/ terminating with nut, bolt,

spring, washer etc. as required (Jointing

shall be done by overlapping and with 2

sets of G.I. nut bolt & spring washer spaced

Laying of I no. PVC insulated and and PVC

sheathed /XLPE power cable of 1.1 KV

grade of following size direct in ground

including excavation snad cushioning,

protective covering and refilling the trench

etc as required.

Laying and fixing one no. PVC insulated and

PVC sheathed /XLPE power cable of 1.1 KV

gade of following size on wall surface as

Up to 35 Sq mm (Clamped with 1 mm thick

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Above 35 Sq mm and up to 95 Sq mm

(Clamped with 25X3 mm MS Flat Clamp)

1.1 KV Cable End Termination:-

Supplying and making indoor cable end

termination with brass double

compression gland and aluminium lugs for

following size of PVC insulated XLPE Al. Ar.

Cable of 1.1 KV grade as required.

Providing, laying and fixing following dia

G.I. pipe (medium class) in ground

177 DSR 14.13 complete with G.I. fittings including - -

trenching (75 cm deep)and re-filling etc. as

A) Supply, fitting, fixing, commissioning

and testing 10 KVA True Online Double

Conversion UPS Stand alone, 3 phase in and

3 phase out with IGBT based rectifireand

inverter along with n]inbuilt isolation

Transformer with 30 min. back up time

Make UPS:- Numeric (Legrand), APC

(Schneider), Vertive(Emersion) Supply,

fitting, fixing and testing of 1 no. 10 KVA in

parallel redundant mode with SMF back-up

batteries suitable for 30 minutes

178 N.S. configuration with :- 415V, 3ph input & 3 Set 4,96,217.00 1.00 4,96,217.00

ph output ON-LINE UPS system backup

protection for 30 minutes and all standard

accessories as required. The UPS will have

in built protection for ground fault, DC

reverse polarity, DC over voltage and

current limitation, AC short circuit, AC over

Voltage and current limitation. The UPS

technology should consists of high double-

conversion efficiency IGBT Based rectifier

on line type UPS.The details are as follows:-

Configuration of UPS :-

Supplying, designing, manufacturing,

installation, un loading at site, shifting to

location, testing and commissioning in

correct alignment position, effecting

proper connection of all incomer and

outgoing of Main Panel as per IS 86230

and IEC 60439 and strictly as per technical

specification for the said Main LT Panel of

the Campus. The said Main LT Panel shall

be factory built floor mounting with Base

Channel size - 75 mm x 40 mm x 6 mm, (or

179 N.S. ISMB CHANNEL) IP-42, with proper lifting Set 9,08,793.00 1.00 9,08,793.00

arrangement completely modular and

compartmentalized made of CRCA Sheet of

2 mm thick (14 SWG) (Load and un load

The Panels should be Ethernet/ Modbus

ready suitable for monitoring and control

with BMS System through Multifuction

meter and miroprocessor incoming feeders

Panel builder shall include all necessary

hardwares in their scope to make LT panel

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supplying, designing, manufacturing,

installation, un loading at site, shifting to

location, testing and commissioning in

correct alignment position, effecting

proper connection of all incomer and

outgoing of LT Panel for HVAC indoor and

out door Units as per IS 86230 and IEC

60439 and strictly as per technical

specification for the said LT Panel of the

Campus. The said LT Panel shall be factory

built wall mounted with Base Channel size -

CHANNEL) IP-42, with proper lifting

arrangement completely modular and

compartmentalized made of CRCA Sheet of

2 mm thick (14 SWG) (Load and un load

Panel builder shall include all necessary

hardwares in their scope to make LT panel

ethernet ready and submit communication

test report during panel testing at shop

The Panels should be Ethernet/ Modbus

Supply of following size of 1.1KV XLPE /

PVC Insulated / PVC sheathed (Heavy

Duty) armoured electric cable with

181 N.S. aluminium conductor as per IS 7098 (Part- - -

1) 1988 with upto date Amendments.

Make:- As per approved Make List (Make:-

Havell’s, Finolex, KEI)

Supply of 3.5 Core 300 Sq. mm. XLPE PVC

Al. / Ar. Cable 1.1 KV

Supply of 3.5 Core 95 Sq. mm. XLPE PVC Al.

/ Ar. Cable 1.1 KV

Cost of 3.5 Core 35 Sq. mm. XLPE PVC Al. /

Ar. Cable 1.1 KV

Supply, fitting fixing and testing of 63A

FP/10kA, C Series MCB (Make:-MCB-

182 N.S. LEGRAND- DX³/SCHNEIDER- ACTI- Each 2,745.00 8.00 21,960.00

9/SIEMENS- BETA GUARD/ L&T- AU

Suitable size & capacity Ceiling Fans/ Wall

Fans (White/Off White color) shall be

provided as per the details given below. All

Ceiling fans shall be of 5 star rating and

energy efficient. Similarly all wall fans and

Exhaust must be of best quality. Warranty

for all fans shoulkd be 2 years. Make:-

Havells, Crompton, Usha,

Supply, fitting, fixing and testing of

1200mm sweep ceiling fans complete

without regulator, double ball bearing,

motor, blades, down rod, canopies,

capacitor, suitable for operation on 230

183.1 N.S. volts, 50 Hz., 1 phase, AC supply connection Each 5,277.00 15.00 79,155.00

with 1.5 sq.mm PVC FRLS Copper wire

complete as required, (BLDC 5 Star (32

Watt) IS:374:2019 (energy efficient fan) .

Colour of Ceiling Fan- (White/Off White

Supply of Wall Fan 400mm 230V with

blade, guard (net), revolving type with

regulator system and proper stand and

fixing bracke, (plastic body).

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supply of 230V AC single phase, Exhaust

Fan (230 mm- 1400 RPM), double ball

bearing (Metal Body, metalick blade, Light

Duty) exhaust fan as required.

Supply of 230V AC single phase, Exhaust

Fan (300 mm- 1400 RPM), double ball

bearing (Metal Body, metalick blade,- Light

Duty) exhaust fan as required.

Note:- LED Luminaire manufacture shall

provide LM79 report from NABL

accredited lab & LM80 report issued by

LED manufacturer. Samples of all type LED

light fixtures are to be submitted to the

Engineering Incharge and each LED Light

should have 100lm/W for the approval

prior to procurement of light fixtures.

Make:- K-Lite/ XAL/Ledvance/Philips

/Wipro /Havells. Make of LED Chip:-

Philips/ Osram/Cree/Nichia. Supply fitting

fixing of follwing LED Light Fixtures :-

K - Lite make ID - 3322, Diva Deep Round

18 W CW Recessed LED down Lighter.

K - Lite make ID - 3485, Trio 1200 mm.

suspended Linear Light.

Ledvance make LDVAL LINEAR SPOT

5X2W Recessed type.

K - Lite make ID - 3497, NEO Pendant

Direct upto 40W, Length - 1210 mm.

Ledvance make 15W/Mtr 24v with Driver

Complete set, Length 5 mtr.

K - Lite make ID - 3612, Bema-7, 12W LED

Round Surface Light fitting.

Decorative type Chandalier light with LED

lamp Complete set.

SITC of 2x12.5 W (25W) LED outdoor UP-

DOWN light (Warm Light) with IP:65 /IP-

66 protection, die cast aluminium housing.

(LM 79 and LM 80 reports need to be

submitted , 50,000 burning hrs,) (Out

DOOR USE) (make-Havells, Philips, K-lite, )

Supply, fitting, fixing, installation & testing

of Water storage 15 Liters Geyser of BEE 5-

star rating (Energy Efficient) vertical type

acralic rust free body, facility of

temperature control ,with capillary

themostat and thermal cut, ISI certified

heating element along with inlet & outlet

connecting pipe, fixing clamps, fasteners,

etc. as required. Make:- Venus / Bajaj /

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Supply, Installation, Testing &

Commissioning of Hi efficient DC Inverter

Side discharge VRF Outdoor units equipped

with Variable refrigerant flow system

(Heating & Cooling), comprising Inverter

driven Scroll Compressor with a wide

range of frequency from 15 to 120 rps ( R-

410A refrigerant gas) . All the unit shall be

provided with micro- processor based

control advance refrigerant control , Liquid

186 N.S. back flow protection , precise oil control - -

technology, 3ph DC motor condenser fan

motor , subcooling through dual tube heat

exchanger & various electrical protection

like-phase sequence, high /low voltage

protection ,compressor overload

protection, temperature & pressure

Approved make : Fujitsu-General/

Mitsubishi Heavy/ Panasonic. Outdoor

Supply of 4-Way Cassette type Indoor Unit

with nominal capacty 3.5 TR, air flow not

less than 1118 CFM & sound pressur level

186.3 N.S. not more than 46 db with Remote Grill kit Nos 97,480.00 6.00 5,84,880.00

Approved make : Fujitsu-General /

Mitsubishi Heavy / Panasonic.

Supply of 3D Flow Cassette type Indoor

Unit with nominal capacty 2.0 TR, air flow

not less than 612 CFM & sound pressur

186.4 N.S. level not more than 46 db with Remote, Nos. 1,25,127.00 5.00 6,25,635.00

Grill kit &receiver kit.

Approved make : Fujitsu-General /

Mitsubishi Heavy / Panasonic.

Supply of 3D Flow Cassette type Indoor

Unit with nominal capacty 1.5 TR, air flow

not less than 512 CFM & sound pressur

186.5 N.S. level not more than 41 db with Remote, Nos. 1,23,310.00 2.00 2,46,620.00

Grill kit &receiver kit.

Approved make : Fujitsu-General /

Mitsubishi Heavy / Panasonic.

Supply of Y-Joints

187 N.S. Approved make : Fujitsu-General / Nos. 7,139.00 10.00 71,390.00

Mitsubishi Heavy / Panasonic.

Supply of ceiling mounted non-vrf 4-way

Cassette with nominal capacity 2.0 TR with

non-CFC refrigerant, Cu condenser, Rotary

type compressor and DC fan motor with

188 N.S. ambient temperature operating range Nos. 1,14,484.00 1.00 1,14,484.00

21deg C ~ 52deg C with 360 degree turbo

flow along with corded/cordless remote.

Approved make: Fujitsu-General /

Mitsubishi Heavy / Panasonic.

Supply of ceiling mounted non-vrf 4-way

Cassette with nominal capacity 3.0 TR with

non-CFC refrigerant, Cu condenser, Rotary

type compressor and DC fan motor with

189 N.S. ambient temperature operating range Nos. 1,36,030.00 1.00 1,36,030.00

21deg C ~ 52deg C with 360 degree turbo

flow along with corded/cordless remote.

Approved make: Fujitsu-General /

Mitsubishi Heavy / Panasonic.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

SITC of Refrigerant Gas (R410a) Charging

190 N.S. as per site requirements. Make : Dupont, Kgs. 1,752.00 30.00 52,560.00

Installation, Testing and Commissioning of

the VRF ODU/IDU with cordless remote

191 N.S. including lifting, shifting and complete with - -

insulation of all refigeration pipe joints VRF

191.1 N.S. 12 HP (Heating and Cooling) Nos. 20,768.00 2.00 41,536.00

191.2 N.S. 14 HP (Heating and Cooling) Nos. 24,922.00 1.00 24,922.00

191.3 N.S. 3.5 Tr 4-way Cassette Unit Nos. 4,543.00 6.00 27,258.00

191.4 N.S. 2.0 Tr 3D flow type Cassette Unit Nos. 4,543.00 5.00 22,715.00

191.5 N.S. 1.5 Tr 3D flow type Cassette Unit Nos. 4,543.00 2.00 9,086.00

191.6 N.S. 2.0 Tr NON-VRF type Cassette units Nos. 7,139.00 1.00 7,139.00

191.7 N.S. 3.0 Tr NON-VRF type Cassette units Nos. 7,139.00 1.00 7,139.00

Supply Installation and Testing of

Refrigerant pipe with 19mm/13 mm thick)

closed cell elastomeric nitrile rubber

tubular insulation between each set of

indoor & outdoor units complete with

192 N.S. necessary connecting Y joints and other - -

accessories as per specifications, all

Refrigerant Pipe Should Run on cable trays

of required Size and should be complete

with Supports ,Hangers etc. Make-

192.1 N.S. 28.6 mm O.D.(with 19 mm insulation ) Rmtr. 1,882.00 40.00 75,280.00

192.2 N.S. 22.2 mm O.D.(with 19 mm insulation ) Rmtr. 1,233.00 10.00 12,330.00

192.3 N.S. 19.05 mm O.D.(with 19 mm insulation ) Rmtr. 1,012.00 15.00 15,180.00

192.4 N.S. 15.8 mm O.D.(with 19 mm insulation ) Rmtr. 994.00 70.00 69,580.00

192.5 N.S. 12.7 mm O.D.(with 13mm insulation ) Rmtr. 844.00 85.00 71,740.00

192.6 N.S. 9.52 mm O.D.(with 13mm insulation ) Rmtr. 714.00 40.00 28,560.00

192.7 N.S. 6.35 mm O.D.(with 13mm insulation ) Rmtr. 467.00 20.00 9,340.00

Supply, Installation, Testing and

193 N.S. Commissioning of Cu ref Pipe for non-vrf Rmtr. 1,272.00 25.00 31,800.00

Cassette type Units

SITC of rigid PVC Drain Piping complete

with fittings, supports as per specifications

194 N.S. and duly insulated with 6 mm thick closed - -

cell nitrile rubber insulation. Make-

Supreme,Astral,Finolex,

SITC of control cum transmission wiring of

Copper conductor cable along with

195 N.S. conduit for looping between indoor & - -

outdoor VRF system . Make- Lapp/

195.1 N.S. 2 C X 1 Sq. mm Shielded for VRF Rmtr. 247.00 225.00 55,575.00

196 N.S. SITC of Anti Vibration Rubber Pad. Lot 11,163.00 1.00 11,163.00

197 N.S. SITC of OD Bracket for cassette Units Nos. 1,233.00 2.00 2,466.00

Supply and Fabrication of MS platform for

VRF type OD unit

199 N.S. Lifting Shifting of outdoor units Lot 26,998.00 1.00 26,998.00

SITC of Suction Filter & Ball Valve for ODU.

Make : Dafoss, Emarson.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

SITC of of 9 U Wall Mounted EQUIPMENT

Cabinet 504.65X600X500 (HXWXD): Rack

must be along with the following

components like; Width (mm)-600, Depth

(mm) - 500, Approx.Net Wt (kg) - 10-12,

CRCA 'D' Grade thickness (mm) - 1.2, RAL

9017 (Matt Black), Glass - 4mm Toughened

Tinted Glass Door, Accessories:, Cooling

Fan (230V A/C 90 CFM) - 2 Nos, PDU

230VAC - 1 No, Cable Manager Metal- 2

Nos, Mounting Hardware (20 sets of M6

screws,washer,cage nuts (nickel coated)) -

1 No, Wall Screws (4 sets of 2'' screws,

washer,rubber grommet (nickel coated)) -

1 No, Door Lock - 1 No, Front Metal Band -1

No. In the rack there must be maintained 1

U = 1.75 inches space. (Make : Legrand-

VALRACK/ Netrack/Rittal/APW.)

SITC of UTP Cat. 6 patch panels

(Compartible for Armrmoured CAT-6

Cable) equipped with 24 RJ 45 connectors

19" panel - 1U , Equipped with 4 cassettes

of 6 pre-fitted Cat. 6 LCS³ RJ 45 connectors,

Automatic cassette removal by simple

pressure,Each connector can be removed

individually,T568A and B marking with

colour codes,Equipped with rear cable

guide to hold cables during

maintenance,Supplied with coloured

labels,Compliant with ISO/IEC 11 801, EN

50173 and ANSI/TIA 568 standards,Flat

panels,24 RJ 45 connectors - 1U - PoE++

UTP ,Equipped with new-generation Quick-

Fix for automatic (screwless) mounting on

enclosure and cabinet uprights,Universal

mounting on all cabinets or

enclosures,Panels ensure automatic

earthing of each connector, equipped with

4 bundles guides fixed at the rear. (Make:-

Legrand /Commscop/ RIT/Bendel

Supply fitting, fixing, and testing of Cat. 6

RJ 45 patch cords and user cords ,RJ 45/RJ

45 - straight,With special “easy grip” plug

Compliant with ISO/IEC 11 801, EN 50173

203 NS and ANSI/TIA 568 standards, Shielded no. 649.00 1.00 649.00

UTP, impedance 100 Ω,PVC,Length CAT6A

UTP Patch Cord - LSZH - 2mtr - Red, boot

bioth end ; (Make:-Legrand /Commscop/

Supply fitting, fixing, and testing of

BLUE/YELLOW color C of Cat. 6 RJ 45

patch cords and user cords ,RJ 45/RJ 45 -

straight,With special “easy grip” plug

204 NS Compliant with ISO/IEC 11 801, EN 50173 Nos. 424.00 24.00 10,176.00

and ANSI/TIA 568 standards, Shielded

UTP, impedance 100 Ω,PVC, Length 1 mtr

boot both end, for Rack End.; (Make:-

Legrand /Commscop/ RIT/Belde

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing, fixing, fitting, connecting and

testing of 2 module white RJ 45 Cat 6 Data

outlet / (CAMERA END) Toolless

information outlets with white coloured RJ-

45 transparent shuttered modular scoket

outlets with front plate. ETL verified to

meet or exceed TIA / EIA category 6

requirements, universal wiring label

205 NS permitting to either T568A or T568B, UL Each 706.00 12.00 8,472.00

listed, and B marking with colour codes, for

computer networking complete in all

respect suitable to fix in modular plate type

switch system with connections as

required and Compiance with ISO/IEC 11

801, EN 50173 and ANSI/TIA 568

standards. (Make:- Legrand-

Arteor/Scheinder- Zencelo/ Mk- Blenz)

SITC of Armoured CAT 6 UTP Cable for

CCTV,Performance 500 MHz, 4 pairs or 2x4

twisted pair cables, 100 Ω,Yellow RAL

1018,LSZH sheath: zero halogen. ANSI/TIA

colour code,Compliant witISO/IEC 11 801,

EN 50173 and ANSI/TIA 568

standards,Products conforming to the new

CPR regulation ,F/UTP - 4 pairs,Length 500

m,Supplied on reel, :,Yellow : (to be drawn

in existing 25 mm PVC conduit or existing

metal floor race way.) Make:_ Belden,

Legrand, Tyco, Digisol

"Supply, fitting, fixing, connecting and

testing of switch with 24 x 10/100/1000T

ports and (4x10 Gbps SFP+ Port for up

linking) , Switching Capacity 56 Gbps and

Forwarding Rate 41.7Mpps, Switch should

support PoE and PoE+ with 370W

minimum power budget, operaating

temperature 0°C to 50°C, Switch should

support link reccovery within 50ms for

Ring architecture, SDN or similar kind of

technolgy should support, Warranty 5 year

207 NS from Day 1 . Make:- Cisco / Allied Telesis / Set 2,09,988.00 1.00 2,09,988.00

The above L2 Managed Data Switch

consists of the following:-

1. Power cord India, right angle.

2. Both side Cable connector.

3. 1 year free service pack.

Interface- 24 x 10/100/1000T ports and

(4x10 Gbps SFP+ Port for up linking)

Switching Capacity/Forwarding Rate :-

56Gbps/41.7Mpps

Supply of Fiber Module 1310nm 10G Base-

LR SFP module; The detailed specification

in Annexure 1 of this module is a part a

necessary part of the BOQ

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing, fixing, connecting & testing of

Krone box (Telephone Tag Block) in a

thermoplastic, IP 65 (weather proof)

enclosure, internally embedded gasket, anti

corrosive, insulated and shock proof with

provision for cable through IP 65 glands

complete in all respects. (Make :

Matrix/Alcatel/Avaya.

10 pair Tag Block (krone Box) (136 mm x

20 pair Tag Block (krone Box) (136 mm x

50 pair Tag Block (krone Box) (300 mm x

209.4 N.S. SITC of IPM with lightning protection. No. 237.00 15.00 3,555.00

Providing, laying, connecting, testing &

commissioning of telephone Unarmoured

cables of conductor size 0.5 sq.mm. high

conductivity Solid Annealed Bare tinned

Copper Telphone cable (with ferrule) with

high density Polythene insulation, Paired,

210 N.S. Polyester and seathed with high Oxygen - -

Index, Fire Retradant, PVC Compound, Gey

Outer Sheath generally confirming ITD

Specification, laid on existing cable tray or

along the wall or laid through under floor

chanel (Metal floor Race Way) as required.

(Make : Finolex / Polycab / Havells)

Cost of 5 pair Telephone Unarmoured

cables of conductor size 0.5 sq.mm./mtr

Providing, laying, connecting, testing &

commissioning of Jelly Filled telephone

Unarmoured cables of conductor size 0.5

sq.mm. high conductivity Solid Annealed

Bare Tinned Copper Telphone cable (With

Ferule) with high density Polythene

inssulated, petrolium Jelly Filled with Ploy

211 N.S. Al. laminated Moisture Barrier, ,Paired, - -

Polythene seathed, unarmoured Polythene

Jacketed Telephone cable as per DOT

Specification, laid on existing cable tray or

along the wall or laid through under floor

chanel (Metal floor Race Way) as required.

(Make : Finolex / Polycab / Delton

Cost of 10 pair PIJF UNARMOURED 10 PAIR

TELEPHONE CABLE /metr

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing, laying, connecting, testing &

commissioning of Jelly Filled telephone

Armoured cables of conductor size 0.5

sq.mm. high conductivity Solid Annealed

Bare Copper Telphone cable with high

density Polythene inssulated, petrolium

Jelly Filled with Ploy Al. laminated

Moisture Barrier, ,Paired, Polythene

seathed, unarmoured Polythene Jacketed

Telephone cable as per DOT Specification,

laid on existing cable tray or along the wall

or laid through under floor chanel (Metal

floor Race Way) as required. (Make :

Finolex / Polycab / Delton/Commscope)

Cost of 50 pair Tel. Cable. (1 mtr.) Jelly

Filled telephone Armoured cables

Wall Mounted 15 U Rack:- Supply of Fully

Loaded 15 U 19" 500*600 Wall Mounted

Rack with all required accessories - ,6A 6

Plug PDU-1 Nos. ,Cable Manager-2 Nos.,

Mounting Screws-20 Pcs ; , Pro Tek Wall

Mount - 15U - 600W - 500D - Double Fan

Provision - Black Fine Tex.- 3nos , Single

Fan For Wall Mount- 3nos., Metal Cable

Manager - 01U - Plastic Cable Loop's

Mountable - Black Fine Tex. - Assembly

Preffered , Power Distribution Unit - 06/16

213 NS Amp Universal - 06 Socket - 16 Amp Switch Set 27,613.00 2.00 55,226.00

with Indicator - 06 Amp Fuse - 06/16 Amp

3 Pin Plug with Power Cable 0.75 sq.mm

1.5 meter Length - Black Fine Tex. –

Assembly, Mounting Hardware Packet {

Containg 1 Nos Each Of 3 } - 20 Set . (Make

: Legrand / Net-Rack/ APW).

Cooling Fan (230V A/C 90 CFM) - 2 Nos

PDU 230VAC - 1 No,

Cable Manager Metal - 3 Nos,

Earthing Strips 150mm H - 1 No,

"SITC of 27 U floor standing network

enclosure should be designed for servers,

networking, data centres and telecom

applications. Vented top cover with fan

mounting provision, front glass or

perforated metal door with lock and key.

Back vented, perforated or perforated dual

metal door with lock and key. Free floor

standing design with 4 Castor wheels

having 2 wheels with brakes and 2 wheels

without brakes. There should be 4 fans of

214 NS 360CFM. Power distribution unit with two Set 84,701.00 1.00 84,701.00

numbers of dual input, vertically mounted,

230 volt, with 32amps MCB and having 25

power outputs of 6/16 amps sockets, with

vertical & horizontal cable managers.

Clearance should be taken from EA before

supply of material regarding product

standard, specification.

Installation of the Network Enclosure is to

be done as per standard practices in DSP

and direction of EA. Transportation of the

item and supply of accessories for erection

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

SITC of UTP Cat. 6A patch panels equipped

with 24 RJ 45 connectors 19" panel - 1U ,

Equipped with 4 cassettes of 6 pre-fitted

Cat. 6A LCS³ RJ 45 connectors, Automatic

cassette removal by simple pressure,Each

connector can be removed

individually,T568A and B marking with

colour codes,Equipped with rear cable

guide to hold cables during

maintenance,Supplied with coloured

215 NS labels,Compliant with ISO/IEC 11 801, EN Nos. 20,893.00 3.00 62,679.00

50173 and ANSI/TIA 568 standards,Flat

panels,24 RJ 45 connectors - 1U - PoE++

UTP ,Equipped with new-generation Quick-

Fix for automatic (screwless) mounting on

enclosure and cabinet uprights,Universal

mounting on all cabinets or

enclosures,Panels ensure automatic

earthing of each connector, equipped with

4 bundles guides fixed at the rear. (Make:-

Legrand /Commscop/ RIT/Belde

Supply fitting, fixing, and testing of Cat. 6A

RJ 45 patch cords and user cords ,RJ 45/RJ

45 - straight,With special “easy grip” plug

Compliant with ISO/IEC 11 801, EN 50173

216 NS and ANSI/TIA 568 standards, Shielded Nos. 649.00 60.00 38,940.00

UTP, impedance 100 Ω,PVC,Length CAT6A

UTP Patch Cord - LSZH - 2mtr - Red ; Boot

Both End. (User End) (Make:-Legrand

/Commscop/ RIT/Optronix.

Supply fitting, fixing, and testing of Cat. 6A

RJ 45 patch cords and user cords ,RJ 45/RJ

45 - straight,With special “easy grip” plug

Compliant with ISO/IEC 11 801, EN 50173

217 NS and ANSI/TIA 568 standards, Shielded Nos. 424.00 60.00 25,440.00

UTP, impedance 100 Ω,PVC,Length CAT6A

UTP Patch Cord - LSZH - 2mtr - Red ; Boot

Both End. (User End) (Make:-Legrand

/Commscop/ RIT/Optronix.

Providing, fixing, fitting, connecting and

testing of 2 module white RJ 45 Cat 6A

Data outlet / Toolless information outlets

with white coloured RJ-45 transparent

shuttered modular scoket outlets with

front plate. ETL verified to meet or exceed

TIA / EIA category 6 requirements,

universal wiring label permitting to either

218 NS T568A or T568B, UL listed, and B marking Nos. 706.00 60.00 42,360.00

with colour codes, for computer

networking complete in all respect

suitable to fix in modular plate type switch

system with connections as required and

Compiance with ISO/IEC 11 801, EN 50173

and ANSI/TIA 568 standards. (Make:-

Legrand- Arteor/Scheinder- Zencelo/ Mk-

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing, Laying, connecting and testing of

6 Core Armoured unitube Single Mode

OS2 OFC (Fiber Optics cable 6 F) for

Outdoor connectivity. Armored fiber Optic

219 NS Cable shall be laid in existing underground Mtr 254.00 150.00 38,100.00

in HDPE pipes with suitable Manholes for

easy pulling and proper Maintenance and

in door in existing floor raceway. (Out

Door Connectivity)

Providing, fixing, connecting and testing of

Modular of 24 port loaded LIU SC- (Single

Mode) type. (Make:- Legrand /Commscop/

Providing, fixing, connecting and testing of

221 NS 3 Duplex SM 9/125 SC adapter plate. (Make Each 1,211.00 3.00 3,633.00

: Legrand/Benden/ Commscop/Molex.

Providing, fixing, fitting, connecting and

222 NS testing of SC- Pigtial 1 Mtr 10 GB -9/125, Each 774.00 3.00 2,322.00

MM (Make:- Legrand /Commscop/ RIT

Providing, fixing, fitting, connecting and

testing of SC/LC duplex Fiber Patch

cords OS1/OS2 of 2 Mtrs. Length PC. .

(Make:- Legrand /Commscop/ RIT

Providing, fixing, fitting, connecting and

testing of OS1/OS2 SC/SC duplex Fiber

patch cords 2 mtr, PC (Make:- Legrand

Providing, fixing, fitting, connecting and

225 NS testing of Splice Tray - 24 Fiber Capacity. Each 2,626.00 3.00 7,878.00

Make:- Legrand /Commscop/ RIT

SITC of Cat. 6A unarmoured cables for

local networks, Performance 500 MHz, 4

pairs or 2x4 twisted pair cables, 100

Ω,Yellow RAL 1018,LSZH sheath: zero

halogen. ANSI/TIA colour code,Compliant

witISO/IEC 11 801, EN 50173 and

226 NS ANSI/TIA 568 standards,Products Mtr 102.00 1,500.00 1,53,000.00

conforming to the new CPR regulation

,F/UTP - 4 pairs,Length 500 m,Supplied on

reel, :,Yellow : (to be drawn in existing 25

mm PVC conduit or existing metal floor

race way.) Make:- Benden, Optronix,

Legrand, Commscop

SITC of Cat. 6A armoured cables for local

networks,Performance 500 MHz, 4 pairs or

2x4 twisted pair cables, 100 Ω,Yellow RAL

1018,LSZH sheath: zero halogen. ANSI/TIA

colour code,Compliant witISO/IEC 11 801,

EN 50173 and ANSI/TIA 568

standards,Products conforming to the new

CPR regulation ,F/UTP - 4 pairs,Length 500

m,Supplied on reel. (to be drawn in

existing 25 mm PVC conduit or existing

metal floor race way.) Make:- Benden,

Optronix, Legrand, Commscop

Splicing of SM/MM Fibre Optics Cable:

228 NS Splicing, testing and commissioning of Core 168.00 50.00 8,400.00

supplied, OFC cable of 6-Core Fibre Optics

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

"Supply, fitting, fixing, connecting and

testing of switch with 24 x 10/100/1000T

ports and (4x10 Gbps SFP+ Port for up

linking) , Switching Capacity 56 Gbps and

Forwarding Rate 41.7Mpps, Switch should

support PoE and PoE+ with 370W

minimum power budget, operaating

temperature 0°C to 50°C, Switch should

support link reccovery within 50ms for

Ring architecture, SDN or similar kind of

technolgy should support, Warranty 5 year

229 NS from Day 1 . Make:- Cisco / Allied Telesis / Set 2,09,988.00 3.00 6,29,964.00

The above L2 Managed Data Switch

consists of the following:-

1. Power cord India, right angle.

2. Both side Cable connector.

3. 1 year free service pack.

Interface- 24 x 10/100/1000T ports and

(4x10 Gbps SFP+ Port for up linking)

Switching Capacity/Forwarding Rate :-

56Gbps/41.7Mpps

SITC of Fiber Module 1310nm 10G Base-LR

SFP+ module; The detailed specification in

Annexure 1 of this module is a part a

necessary part of the BOQ

Metal/GI Raceway:- SITC of following

compartmental Raceways-Metal/GI for

Screed floors, Should be IP20-IK08 for

distributing LV and ELV cabling in screed

floors particularly suitable for

appalications requiring EMC screening,

should be pre-galvanised sheet 275 GSM

coating with thickness of 1.5 mm with

bolted construction might be combined

with junction boxes or floor boxes for

wiring devices, fixing and coupler

accessories, should consisit of body and

cover, cover can be fitted on to the body

with screws and can be opened easily if

required as per IEC 61534-22. Make:-

Legrand, Optronix, Cope

225 x 38 mm 3 compartment raceways -

Data & IP-TEL, Power

231.2 MR 150 x 38 mm 1 compartment raceways . Mtr 1,800.00 50.00 90,000.00

231.3 MR 150 x 25 mm 1 compartment raceways . Mtr 1,659.00 100.00 1,65,900.00

231.4 MR 100 x 25 mm 1 compartment raceways . Mtr 1,518.00 50.00 75,900.00

231.5 MR 50 x 25 mm 1 compartment raceways . Mtr 1,235.00 50.00 61,750.00

coupler for joining metal raceways :-

SITC of coupler for joining metal raceways

232 MR 38mm for Screed floors, can be fitted on to Nos. 120.00 19.00 2,280.00

the body of the raceways with screws.

Make:- Legrand, Optronix, Cope

Bracket:- SITC of fixing bracket for metal

raceways of following sizes for Screed

233 MR floors, can be fitted on to the body of the - -

raceways with screws and the floor. Make:-

Legrand, Optronix., Cope

233.1 MR 150 x 38 mm fixing bracket Nos. 76.00 14.00 1,064.00

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Junction Box:- SITC of Back box for Screed

Floor with Screed Thikness 50 mm to 70

mm , IP 44 junction boxes for tiles/marble

234 MR should Conforms to IEC/EN 60670-23 , Nos. 5,121.00 6.00 30,726.00

Compatible with screed floor system.

(225x225x65-90mm) Make:- Legrand,

Floor Box with LID & Trim for screed floor:-

SITC of Floor access box with LID & Trim

for Tiles /Marbles Grey cover RAL 1019 for

3 compartment floor box with flexible

cable exits need to installed in backbox for

screed floor system. (hi- Adjustable

225x225x65-90mm) Make:- Legrand,

Support Plates for Floor Boxes :- SITC of

Support Plates for Floor Boxes 77 mm

236 MR width waved support Plates for 4 Nos. 981.00 17.00 16,677.00

Modules(2 x 2) -03 Nos. set for each floor

Boxes. Make:- Legrand, Optronix, Cope

Demolishing R.C.C. work manually/ by

mechanical means including stacking of

237 15.3 steel bars and disposal of unserviceable Cum 3,551.25 - -

material within 50 metres lead as per

direction of Engineer - in- charge.

Demolishing brick work manually/ by

mechanical means including stacking of

serviceable material and disposal of

unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

239 15.12 chowkhats, architrave, holdfasts etc. - -

complete and stacking within 50 metres

239.1 15.12.1 Of area 3 sq. metres and below Each 367.20 5.00 1,836.00

239.2 15.12.2 Of area beyond 3 sq. metres Each 502.75 5.00 2,513.75

Taking out doors, windows and clerestory

240 15.13 window shutters (steel or wood) including - -

stacking within 50 metres lead :

240.1 15.13.1 Of area 3 sq. metres and below Each 143.50 5.00 717.50

240.2 15.13.2 Of area beyond 3 sq. metres Each 188.90 5.00 944.50

Dismantling tile work in floors and roofs

241 15.23 laid in cement mortar including stacking - -

material within 50 metres lead.

For thickness of tiles above 25 mm and up

Disposal of building rubbish / malba /

similar unserviceable, dismantled or waste

materials by mechanical means, including

loading, transporting, unloading to

approved municipal dumping ground or as

approved by Engineer-in-charge, beyond

50 m initial lead, for all leads including all

lifts involved.

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - All work

up to plinth level : 1 :3:6 (1 Cement : 3

coarse sand (zone-Ill) derived from natural

sources : 6 graded stone aggregate 20 mm

size derived from natural sources)

Providing and laying in position ready

mixed or site batched design mix cement

concrete for reinforced cement concrete

work; using coarse aggregate and fine

aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in

recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to

improve durability and workability

without impairing strength; including

244 5.33.2.1 pumping of concrete to site of laying, Cum 9,860.40 1.52 14,975.48

curing, carriage for all leads; but excluding

the cost of centering, shuttering, finishing

and reinforcement as per direction of the

engineer-in-charge; for the following

grades of concrete. Note: Extra cement up

to 10% of the minimum specified cement

content in design mix shall be payable

separately. In case the cement content in

design mix is more than 110% of the

specified minimum cement content, the

contractor shall have discretion to either re-

Lintels, beams, plinth beams, girders,

cantilevers with water proof ply 12 mm

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all

complete above plinth level. Thermo-

Mechanically Treated bars of grade Fe-

Brick work with non modular fly ash bricks

conforming to IS:12894, class designation

10 average compressive strength in super

structure above plinth level up to floor V

level in : Cement mortar

1:6 (1 cement : 6 Coarse sand)

12 mm cement plaster of mix : 1:6 (1

cement: 6 coarse sand)

18 mm cement plaster in two coats under

layer 12 mm thick cement plaster 1:5 (1

249 13.11 cement : 5 coarse sand) finished with a top Sqm 518.55 300.00 1,55,565.00

layer 6 mm thick cement plaster 1:6 (1

cement : 6 fine sand).

Providing wood work in frames of doors,

windows, clerestory windows and other

frames, wrought framed and fixed in

250 9.1.1.1 position with hold fast lugs or with dash Cum 1,42,949.70 0.28 39,454.12

fasteners of required dia & length (hold fast

lugs or dash fastener shall be paid for

separately). Second class teak wood

Digitally signed by SILKI

Sr. No. BOQ Item No. Description of items Unit Rate Qty Amount

Providing and fixing M.S. fan clamp type I

or II of 16 mm dia M.S. bar, bent to shape

with hooked ends in R.C.C. slabs or beams

during laying, including painting the

exposed portion of loop, all as per standard

design complete.

252 MR Addressable SMOKE DETECTOR with base Nos. 2,183.00 132.00 2,88,156.00

Addressable LOOP SOUNDER/HOOTER

254 MR RESPONSE INDICATOR Nos. 112.10 40.00 4,484.00

255 MR Addressable 1 LOOP PANEL Nos. 81,272.50 2.00 1,62,545.00

256 MR Addressable MANUAL CALL POINT Nos. 4,106.40 4.00 16,425.60

257 MR 1.5 X 2 Core Copper Armoured Cable Rmt. 135.70 1,000.00 1,35,700.00

258 MR Junction Box Nos. 259.60 50.00 12,980.00

Installation, Testing & Commissioning of

Total Amount 3,83,71,286.48

Total Amount 3,83,71,286.48

Less @5.4% tender premium 20,72,049.48

Gross Total Amount 3,62,99,237.00

Gross Total Amount 3,62,99,237.00

Digitally signed by SILKI