Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹39.9 L+₹4,738 (0.12%)Rejected-AOC 00 JAI BHAWANI COMPLEX MAIN ROAD SADAR WARD JAGDALPUR BASTAR CHHATTISGARH 494001 UDYAM CG 01 0003803 | BASTAR | CHHATTISGARH | 494001 | L2 | Rejected-AOC R | |
| 3 | L3₹40.8 L+₹93,797.10 (2.35%)Rejected-AOC 1 259 CHUKKUWALA DEHRADUN UK | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC R | |
| 4 | L4₹43.0 L+₹3.1 L (7.82%)Rejected-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC R | |
| 5 | L5₹45.0 L+₹5.1 L (12.8%)Rejected-AOC | L5 | Rejected-AOC R |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
CERTAIN REVENUE REPAIRS LBW AND MINOR WORKS UNDER AGE BR I AT IMA DEHRADUN
2022_MES_567557_1
GE/IMA/T-73 of 2022-23 9261/E8
Open Tender
Support/Maintenance Service
Item Rate
120 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹96,000
Yes
1 Mar 2023
6 Dec 2022
11 Jan 2023
7 Dec 2022
9 Jan 2023
26 Dec 2022
Amount
Surface dressing n. exc 15 Cm deep and getting out in soft/loose soil complete all as specified.
Excavation over areas n. exc 1.5m deep and getting out in soft/loose soil complete all as specified.
All as item No. 2 above but 1.5m to 3.0m depth.
Excavation in trenches n.exc 1.5 m deep and n.exc 1.5 m wide in depth for foundation etc or for shaft wells, cesspits, manholes, peir holes etc. n'exc.10 sqm on plan and n' exc 1.50 M depth and getting out in soft/loose soil for foundation etc complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 Cm thick in soil complete all as specified & directed.
Removing excavated materials (soil) n,exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point complete all as specified and directed.
M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and as directed.
M&L for reinforced Cement Concrete design mix M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced Cement Concrete design mix M-25 as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L for reinforced Cement Concrete design mix M-25 as in Beams, cantilevers bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L for reinforced Cement Concrete design mix M-25 as in Fins, fascias, louvres parapets, and railings exc. 60 Cm height, newels balustrade, and the like complete all as specified and directed.
M&L for reinforced Cement Concrete design mix M-25 as in chajjas complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished curved surfaces of concrete.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, circular on plan rough finished surface.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping
Formwork to fins, louvers, fascia rough finished surface all as directed.
Formwork to sides and soffits of floor or roof beams, beam haunching, girders rough finished plain surface.
Formwork to chullah hoods, chajjas, trough and similar items including edges rough finished flat surface of concrete.
M & L for TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia all as specified .
M & L for TMT MS bar 8 mm dia , cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia all as specified .
M&L for TMT MS bar 6mm dia & over up to 10mmdia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups all as specified .
M & L for masonry work using AAC BLOCKS size 625x250x150 mm straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.
M & L for Brick work with sub class 'B' brick (old size) straight or curved on plan to any radius in half brick thick wall built in cement mortar1:4 complete all as directed.
M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work complete all as specified & directed.
M & L for 10mm thick plaster in single coat over neat cement slurry on brick work or concrete surface with using READIPLAST (Readymixed) cement plaster water powder ratio 17-19% by weight, finished even and fair, complete all as specified and directed. Make:- UitraTach/ACC/Birala
M & L for 5mm thick plaster on concrete surface with using READIPLAST (Readymixed) cement plaster water powder ratio 17-19% by weight, on ceiling finished even and smooth incl watering, curing, scaffolding complete all as directed.Make:- UitraTach/ACC/Birala
M & L for 15mm thick external plaster in two layer of 10mm & 5mm each on brick work or concrete surface with using READIPLAST (Readymixed) cement plaster water powder ratio 17-19% by weight, over neat cement slurry including providing water proofing compound in top coat of plaster as per manufacturer's instructions, watering, curing, scaffolding complete all as specified and directed.( Note :- WPC shall be measured and paid separately). Make:- UitraTach/ACC/Birala
M & L for Rendering 20 mm thick on concrete surface with using READIPLAST (Readymixed) cement plaster water powder ratio 17-19% by weight, mixed with WPC as per manufacturer's instructions, surfaces finish even and smooth without using extra cement complete all as specified and directed. ( Note :- WPC shall be measured and paid separately). Make:- UitraTach/ACC/Birala
Supply only liquid water proofing compound complete all as specified & directed.
Spreading and levelling of soil obtained from excavation in layers n exc. 25Cm and well ramming including watering as required complete all as directed.
S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .
S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .
S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately
M&L for 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter brown, minimum density of 600 kg/cum with stainless steel wire mesh in any number of division with (bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with WPC bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed.
M&L for box type Steel window factory made with side hung shutter including MS hinges with steel handle and steel hook & eye complete with glazing bars dovetailed or welded complete all as specified and directed.
M&L for box type Steel window factory made with side hung shutter including MS hinges with steel handle and steel hook & eye complete without glazing bars dovetailed or welded complete all as specified and directed.
M&L for box type Steel ventilators with top hung shutter including hinges, steel hook & eye complete all as specified and directed
M & L for Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed
M & L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed
M & L for 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed
M & L for Butt hinges, 100mm long, medium weight, cold rolled, stainless steel complete all as directed.Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
S&F 75 mm size stainless steel butt hinges complete all as specified and directed.Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
S & F125 mm long aluminium anodized handle cast complete all as directed. Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
S & F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
S & F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
S & F Floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in door, overall length of cover plate 150mm complete all as specified and directed.Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
M&L for Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7mm/450x350x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles complete all as directed.
M & L for Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed cement mortar1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as directed.
M & L for Machine cut kota stone slab flooring 18-20mm thick laid over 10mm thick rendering in cement mortar1:4 as base on vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing i complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar1:4 complete complete all as directed.
M&L for 20mm thick Granite stone of jet black colour (of any type) work (table rubbed, polished & moulding ) in wash basin plateform, cooking platforms and like including cutting of granite to accommodate oval type WHB over and including 15 mm thick screed bed in cement mortar(1:4) finished rough surface to receive granite including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.
M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.
M&L for broken stone hard core of gauge n. exc. 63mm, deposited, spread and levelled in layer n. exc 15 Cm thick watered & rammed to a true surface, complete all as specified and directed.
M & L for preparation of new steel surfaces of any description over 10 cement mortarwidth or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new or previously untreated concrete/plastered wall surfaces of any description and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new or previously untreated concrete/plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.
Preparation of new plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying two coats of oil bound emulsion over a coat of chalk whitening complete all as directed.
M & L for Preparation of new surfaces of wall / ceiling and applying two coats of exterior weather emulsion (Asian/Berger) over a coat of cement primer by mechanical means including scaffolding complete all as specified and directed.
M & L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete complete all as directed.
M & L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete complete all as directed.
M & L for Chromium plated Angle valve 15mm dia (angle cock) complete all as directed. Make: ESSCO (Jaquar) / Prayag polymer (700 series) or cera (Vector).
M & L for 15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe complete all as directed. Make: Zoloto/Leader/Kirloskar
M & L for 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe complete all as directed. Make:Zoloto/Leader/Kirloskar
M & L for 500 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I & directed.
S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as directed. Make: Prayag/Supreme/Shakti
M & L for 15mm dia pillar cock Super Delux with Aerator complete all as directed. Make- ESSCO (Jaquar) / cera (Victor) / Prayag polymer (700 series)
M & L for 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO / Cera (Victor) /Prayag (700 series)
S&F 110 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints,fixed to wall, complete all as specified and directed.
S&F for 75mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors, laid in trenches or in floors complete all as specified.
S&F 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm bore with oval access doors complete all as specified and directed.
S&F PVC (SWR) bend any radius 75mm pipe,with oval access door complete all as specified and directed.
S&F PVC (SWR) 110mm bore Branch pieces, double (double Y), equal or unequal with access doors complete all as specified.
S&F vitreous china Squatting pan of ‘Orissa pattern’ size 580mm x 440mm white, with integral foot rest & CI P trap complete all as specified & directed.
M & L for PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe complete all as directed.
M & L for Vitreous china WHB Star white oval type counter top WHB 63 x 50 Cm including CP waste coupling complete all as directed.
M & L for Brass chromium plated towel rail 600mm size fixed complete all as directed. Make : ESSCO (Jaquaro. ) Cat No. AEC-1111 or Cera Cat No. F5002103 / Prayag polymer.
S&F PVC connections 15mm size with PTMT length 600mm complete all as directed.
S & F Low density polyethylene pipe (LDPE) 32mm dia of pressure rating 6 kg/ cm2 fixed as in waste pipe, complete all as directed.
S&F Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. EOS-542N or Cera Cat part No. F7120108AB or Prayag polymer
M & L for 15mm dia chromium plated concealed stop cock, heavy body screwed both ends for iron or for union fixed in repair complete all as directed Make: ESSCO (Jaquar) Cera (Victor)/ Prayag polymer (700 series)
M & L for Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' with mouth size 150mm x 150mm setting and jointing to drains with cement mortar 1:1 including embedding in PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) complete all as specified & directed.
Surface excavation n. exc 30 Cm deep and averaging 15 Cm deep and getting out in any type of soil, complete all as directed.
M&L for 80mm thick factory made rubberised colored chamfered edge pre-published cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete, all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), complete all as directed.Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula.
M&L for Salt-glazed stoneware drain pipes grade 'A' 150mm dia laid in trenches and jointed as specified
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 150mm bore of pipe complete all as directed.
M&L for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in foundation of man hole complete all as specified and directed.
M&L for Brick work using sub class “B” old size bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:4 complete all as specified.
M&L for 15mm thick cement plaster in cement mortar 1:4 of of brick work finished even and smooth without using extra cement complete all as directed.
M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in cement mortar 1:4 complete all as directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ).
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as directed.
M&L for Construction of soakage well of size 1.20 M dia X 3.0M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including brick work in cement mortar 1:4, plaster where shown on drg shall be 12mm thick in cement mortar 1:6, bearing plaster 15mm thick in cement mortar 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.
M&L for Construction of septic tank 10 users, , excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of brick work in cement mortar 1:4,, plaster where shown on drg shall be 12mm thick in cement mortar 1:6, bearing plaster 15mm thick in cement mortar 1:4, RCC cover slab In M-25 complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.
M & L for Precast Cement concrete louvers & jallies 35mm thick 1:2:4 type B0 (using 12.5mm graded crushed stone agg) set in cement mortar 1:4, incl all mouldings including complete all as specified & directed.
Supply and laying connecting and testing XLPE insulated PVC sheathed armoured LT electirc power UG cable (heavy duty with stranded aluminium conductor) of size 16 sqmm 4 core 1100 volts (Earthed) grade. Confirming to IS 7098 (part -II) laid thorught duct/pipe in trenches etc with cable glands & suitable size of aluminum lugs complete all as specified and as directed. Make Havells/Finolex/ Polycab/Gloster
Supply and laying GI Tubing 40 mm bore light grade with fitting laid in trenches of for road crossing for protection of LT underground cables complete all as specified and as directed.
Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4 mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.
Material and labor for brick protection cover (0.23x0.115x0.075m) to undergroung cable with sub class "B" over brunt brick (locally available best quality) laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.
Material and labour for sand cushioning to under ground cables 8 Cm thick before laying the cable and 15 Cm, thick after laying, stretching and testing the cable complete all as specified and directed.
Material and labour for point wiring with PVC insulated and unsheathed electric able 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Finolex, Havells, Polycab, Gloster,Grandlay. Make of conduit: Finolex, Ess Ess Kay, ICL.AKG Note: (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
One light point controlled by one, one way switch 5 Amps
One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
All as per item No.105 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.
Supply and fix Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.
Supply and fix Switch piano, flush type, single pole, one way, 15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.
Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.
Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 &15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.
Supply and fix Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all specified and as directed. Make:- Anchor/Legrand/Havells/C&S.
Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed Make:- Anchor/Legrand/Havells/C&S.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200MM sweep. Min are delivery 210CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified. Make:- Crompton/Havells/Bajaj
Supply and fix surface and wall mounted LED batten fitting 22 watt 230 volts AC, cool white not less than 1135 mm extrude aluminium housing provided for effiicient heat dissipation with polycarbonate diffuser and integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as directed. make philips ( BN 021 LED40S-6500 PSU GR (4 FT)/Crompton/ Havells/Bajaj
Supply and fix LED Mirror Light 10 W, baten type 2 feet long including LED lamp and all fixing arrengement, connection complete all as directed. Make: Philips ( BN 021 LED12S 6500 PSU GR)/Crompton/Havells/Bajaj
Supply and fix building security light fitting 1x30 W new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with mid power led as lighting source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK 07 including suitable size of bracket bend in shape with 2 Nos of clamps,nuts,bolts etc including taking down existing fitting etc all as specified and directed.Make:- Crompton(LSTS-30-CDL-M)/Wipro/ havells/Philips
S & F plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make : Bajaj/Usha/Crompton/havells.
Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
Supply and fix MCB Isolator TPN 415 volts, 50 Hz of capacity 40 Amps all as specified and directed.
Supply and fix MCB SP 240 volts, 50 Hz capacity 32 Amps all as specified and directed
Supply and fix Water heater storage type, electric,capacity 50 litres.BEE 5 star rated complete all as specified and directed. Make:- Havells/ Crompton/Bajaj
Supply and laying GI Tubing 20mm bore medium grade with fitting laid in trenches of for road crossing for protection of LT underground cables complete all as specified and as directed.
S&F MS Joist, channel, angle, tee sections or Hollow tublar section, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated.
Excavation in post holes (or similar holes) each n. Exc 0.5Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 Cm complete all as specified and directed.
M&L for PCC 1:2:4 type B2 (using 40 mm graded aggregade ) in foundation, filling & mass concrete for post holes complete all as specified.
Cast iron work grade FG 150, unmachined, in brackets, gully traps,gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles n. exc 5.00 Kg each complete all as specified.
S&F Manually operated gear system suitable for straightening & tightening of horizontal rope complete all as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified.
M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
Rolling and consolidating, formation surfaces (in cutting) with 8 to 12 ton power roller complete to reqd level, gradient, slopes, camber and super elevation including approved earth which may occur during rolling process complete all as specified and directed
Taking down carefully existing mild steel latches from door shutters complete all as directed.
S&F in repairs 12mm thick commercial plywood panel grade BWP, fixed to timber frame with nails inliew of damaged particle board door panels, all complete all as directed. Make:- Green Ply,Century Plywood, Archid Ply Industries Ltd
S&F 9mm thick commercial plywood panel grade BWP, fixed to timber frame with nails as lock rail to door shutter , all complete all as directed. Make:- Green Ply,Century Plywood, Archid Ply Industries Ltd
S&F 250mm long stainless steel sliding door bolt with clips, hasp & staples, fixed with stainless nut bolts/screws, all as specified.Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.
S&F, 2nd class hard wood, plain fillet, square, rectangular or triangular in section, wrought timber secured with nails, sectional area not exc. 3.00 Sqcm complete fixed in repair all as directed.
M & L for Preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
M & L for Preparation of old treated wooden surfaces of any description, not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed.
Sanjay Enterprises
Sharda Enterprises
M/S PUNDIR BUILDERS
JAIN BUILDERS
G S CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .