Providing, fitting fixing and installation of fire fighting system at Newly constructed Court Building of the Sabroom Sub Divisional Court, South Tripura 2nd call

Amount

Providing & Fitting fixing of Cylinder less Automatic Fire suppression system Blaze Cut 2 m to be installed in the Electric main Penal Board according to the recommendation of Fire advisory, TFS etc. Complete as per direction of the Engineer in Charge.

Providing & Fitting fixing of CO2 Fire Extinguisher 2 kg capacity Cylinder to be instsalled in the Electric Sub Penal Board according to the recommendation of Fire advisory, TFS etc. Complete as per direction of the Engineer in Charge.

Providing & Fitting fixing of DCP Fire Extinguisher 4 kg capacity Cylinder to be installed in the Electric Sub Penal Board according to the recommendation of Fire advisory, TFS etc. Complete as per direction of the Engineer in Charge.

Providing and fixing first aid fire hose reel equipment confirming to IS : 884-1969 with upto date amendments finished with post office red spray paint and complete with following as required : (i) 20mm dia 30- 36.5 metres long hose tubing of approved make confirming to IS : 5132-1969 with upto date amendments. (ii) Swinging type hose guide fixing bracket assembly (iii) 25mm dia gate valve (iv)6mm outlet SS nozzle with shut off valve as required etc. to be installed in the different places of the building according to the recommendation of Fire advisory, TFS , complete as per direction of the Engineer in Charge.

Supply, Erection, Testing and commissioning of Terrace fire pump located at terrace level capable of delivering following capacity complete with adequate HP. Electrical driven monoblock type Centrifugal pump wtih squirrel cage motor with bronze impellors, pressure gauge, pressure switch etc complete. 450 LPM 30M HEAD, 5HP, working on 3 Phase 415 V, 2900 RPM in/c suitable specification of starter main switch Electric cable as required for running of the pump set complete as per direction of Engineer in charge.

SLFTC of M.S. Pipes on surface Supplying, Laying, Fixing, Testing & commissioning of following sizes (NB) of ISI mark heavy class TATA/ JINDAL M.S pipes including cutting threading welding etc. and providing all fittings e.g. Elbows. Reducers. Clamps, Hangers, Flanges, Gaskets. Nuts& Bolts cost including providing two coats of synthetic enamel paints of approved shades over a coat of primer. prior to application to primer the surface should be clean for any dirt, rusts, rough substance etc. including painting of legends of both direction arrow as per approval of the project manager. i) 100 mm dia.

ii) 80 mm dia.

iii) 50 mm dia.

Providing and fixing butterfly valve confirming to type P.N. 1.6 of IS 13095-1991 complete with flanges, bolts, nuts, gasket etc. as per specifications complete in all respect hydraulically tested to 20kg/sqcm. i) 80 mm dia

ii) 100mm dia.

Providing and fixing dial type pressure gauge with isolation cock and pipe at hydrant station Dial diameter 150mm calibration 0-15kg

TINKU MAJUMDER