Repairs to Dr. Ambedkar Bhavan at Bharuch Dist. Bharuch (Repairing of GF & FF flooring, colour, plaster, toilet block, compound wall, paver block, door & window & other misc. work)

Name of Work :- Repairs to Dr. Ambedkar Bhavan at Bharuch Dist. Bharuch

(Repairing of GF & FF flooring, colour, plaster, toilet block, compound wall,

paver block, door & window & other misc. work)

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 29.28 Sq.m. 10.99

stacking of useful materials and disposing off the excavated stuff upto

any lead. (A) Loose or soft soil.

2 Dismentaling tiled of stone floors laid in mortar including stacking of 1064.00 Sq.m. 46.77

serviceable materials and disposal of unserviceable materials with all

lead and lift..

3 Removing dry or oil bound distemper by a washing and scraping 4080.00 Sq.m. 10.99

and sand papering the wall surface smooth including necessary

repairs to scratches complete.

4 Demolition of Brick work and stone masonry including stacking of 78.00 Cum 536.09

serviceable materials and disposal of unserviceable materials with all

lead and lift. (ii) In Cement Mortar.

5 Dismantling sanitary fittings like wash basin W.C. pan Indian and 26.00 No. 394.51

European type, flushing tank etc. including stacking the materials with

all lead and lift.

6 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse 7.00 Cum 3481.28

sand : 4 graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and plinth.

7 Providing 20mm thick cement plaster in single coat on single or half 1868.00 Sq.m. 211.05

brick walls for interior plastering upto floor two level and finished even

and smooth in cement mortar 1:4 (1 cement : 4 sand)

8 Steel work, welded in built up sections framed work including cutting, 18.00 Qtl. 8958.28

hoisting, fixing in position and applying a priming coat of read lead

paint & two coat oil paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins connected to common rafters and

9 Applying two coats of putty & two coats of primer of approved brand 1868.00 Sq.m. 78.90

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

10 Wall painting (two coats) with plastic emulsion paint of approved brand 3614.00 Sq.m. 78.90

and manufacture on undercoated wall surfaces to give an even shade

including throughly brushing the surface free form mortar droppings

and other foreign matter and sand papered smooth.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

11 Distempering (two coats) with oil bound distemper of approved brand 517.00 Sq.m. 651.67

and manufacture and of required shade on wall surfaces to give an

even shade, over and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth. Extra over Item

44, 45 for distempering with oil bound washable distemper on ceiling

and sloping roofs.

12 Providing and fixing wash basin with single hole for pillar tap with C.I. 8.00 Each 1382.37

or M.S. brackets painted white including cutting holes and making

good the same but excluding fittings (A) Vitreous china (ii) flat back

wash basin 550mm x 400mm size in white colour.

13 Providing and fixing 600mm x 450mm bevelled edge mirror of 8.00 Each 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet and

fixing to wooden plug with C.P. brass screws and washers.

14 Providing and fixing precast Rubber Dye / steel Dye inter locking 357.00 Sq.m. 685.42

concrete block 60mm thick with grade of concrete M-300 pneumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines

of IRC : SP 63-2018 etc. complete.

15 Providing and laying brick work using common burnt clay building 78.00 Cum 4388.47

Modular type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:5 (1 cement :

5 fine sand) including the cost of all materials and labour charges etc.

16 Providing and laying 24" x 24" vitrified 8 mm thick tile flooring over 20 979.00 Sq.m. 916.27

mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement

slurry including finished with flush pointing & cleaning the surface etc.

complete for light shade.

17 Providing and laying Ceramic tiles 6 mm. thick in skirting, risers of 216.00 Sq.m. 995.81

steps and dedo on 10 mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry.

18 Providing laying and jointing in true line and level I.S.I. mark 15mm 120.00 Rmt. 72.65

dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

19 Providing laying and jointing in true line and level I.S.I. mark 25mm 62.00 Rmt. 91.84

dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

20 Providing and fixing screw down bib taps of following size. (A) Brass 14.00 Each 186.83

screw down bib tap polished bright (i) 15mm dia. as directed by

Engineer in charge.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

21 Providing and fixing cast iron (spun) Nahni trap of the following 14.00 Each 615.63

nominal diameter of self cleaning design with C.I. screwed down or

hinged grating including cost of cutting and making good the walls and

floors 100 mm inlet and 50 mm. outlet. (C) 100 mm dia.

22 Providing and fixing wash down water closet (European type W.C. 12.00 Each 2382.59

Pan) wall hung type with integral "P" or "S" trap and PVC flushing

cistern with fittings and including plastic sheet cover including jointing

trap with soil pipe in cm 1:1 (1 cement : 1 fine sand) and connecting

cistern with closet as approved quality etc. complete.

23 Providing and fixing pillar tap, capstan head, screw down high 10.00 Each 308.73

pressure with screws, shanks and back nuts. (i) 15mm dia. as directed

by Engineer in charge.

24 Providing and fixing brass screw down stop tap. (A) 15mm dia. as 12.00 Each 205.73

approved & directed by Engineer in charge.

25 Providing and fixing chromium plated brass half turn flush cock of 12.00 Each 263.77

approved quality including fixing in pipe line etc. complete. (ii) 25mm

dia. as directed by Engineer in charge.

26 Providing and fixing Urinal of approved quality including connection 6.00 Each 1557.35

with trap and with integral longitudinal flush pipe. (A) Squatting plate

pattern white earthenware 550 x 300mm.

27 Providing & fixing standard extruded of alluminium section of size 5.00 Sq.m. 1175.56

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc. complete for Ventilation.

28 Providing and fixing window having extruded aluminum colour powder 52.00 Sq.m. 1591.87

coated section frame main outer size 95mm x 24mm x 1.17mm (@ wt.

of 0.738 kg/mt), horizontal three track member size 92mm x

31.75mm x 1.30mm (@ wt. of 1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (@ wt. of 1.06 Kg/mt) with sliding shutters

of horizontal member size 40mm x 18mm x 1.29mm (@ wt. of

Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (@ wt. of

0.456 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated alluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

29 Providing and fixing door having 18mm thick outer granite frame 48.00 Sq.m. 3665.29

with 20mm thick cement plaster and finished with cement mortar C.M.

(1:3) having side hung single shutter having factory fabricated

standard for door frame, with factory made 35mm thick flush door both

side pre laminated with lach lock as per detail colour & pattern

approved by this office including necessary anodized alluminium

fixtures and fastening.

30 Providing and fixing machine cut free edges, pre mirror Polished 49.00 Sq.m. 2456.32

Green Marble stone slab 18 mm to 20mm thick (single piece not

more than 150 cm) for Doors & windows sill, jambs & cladding as

per design including full moulded round front edge and 1cm nosing on

20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) jointed with

grey cement slurry including rubbing, polishing & finishing etc.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

31 Providing and laying broken china mosaic flooring for terrace using 353.00 Sq.m. 747.29

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall, clearing with water and

oxalic acid etc. as directed.

i.e. Rs. Thirty Nine Lakhs, Thirty Four Thousand One hundred Ninety One and Eighty Four Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed and

to be approved from the Engineer in charge.

6. Credit for dismantalled materials of amount of Rs. 15960.00 must be recovered from 1st R.A. bill of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division, Bharuch (R & B) Division, Bharuch (R & B) Division,

Bharuch Bharuch Bharuch