PROVN OF OVERHEAD ROOFING COVER PASSAGE BETWEEN SSDH AND SS BLOCK AND PARKING SHED INFRONT OF WARDROOM AT NAVAL BASE UNDER GE NAVY PORBANDAR

Amount

Surface dressing n exc 15 cm deep in hard/dense soil.

M & L for PCC 1:4:8 (40mm graded aggregate) type D2 as in foundation.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for PCC type C-1, 1:3:6 (20mm graded aggregate) for bed blocks and similar work as specified.

M&L Removing excavated rocks exceeding 250 M but n.exc500m and depositing where directed.

M&L for porbandar stone masonry work built in cement mortar 1:6 complete all as specifieid.

M & L for rendering 15mm thick C:M 1:4 on stone masonry surfaces finished even & smooth without using extra cement

M & L for hardcore of gauge n exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface

M&L PCC 100 mm thick 1:2:4 type B-2 using 40 mm graded stone aggregare finished even and smooth without using extra cement layed alternative bays.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A'

S & F for steel work in tubular trusses including special shaped washer etc, coplete using ERW or induction butt welded tubes conforming to ISI 1161-1998 grade st-240.

S&F MS plate 6mm thick (Plain or chequred) channels, and counter sank) forming holes, with out any attachment FE-410-W (Code E - 250) Quality - B

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for painting two coat of epoxy paint over a coat of epoxy primer on steel surfaces of any description, n.exc. 10cm in width or girth when unconnected with other painting including removing of existing painting by burning off by blow lamps and cleaning with scrapers including preparation of surfaces, complete all as directed by Engr-in-charge. (Note :- EPLUX 610 HBLD primer coating and two coats of EPILUX 155 High build Enamel finishing coat of Berger protection coating).

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to distance n. exc 50m and making good surface inhard / dense soil complete all as specified and directed.

M&L for PCC type B-0, 1:2:4 (12.5mm graded aggregate) for post holes including neecessary formwork as specified.

S&F of rolled mild steel as in roof russes, (framed), trusses purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde E-250) quality A complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or grith and also applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

J J ENTERPRISES

RAJ ENTERPRISE

JAY BHARAT METAL SUPPLIERS

OM ENTERPRISE

BABUBHAI BHIMABHAI PANDAVADRA

SANVI ASSOCIATES

AADESH CONSTRUCTION

shree chamunda enterprise

Vastushilp Building Designer