Construction of Boundary Fencing (chain link wire mesh) with Provision of Gate at Taibandal TCO under Mohanbhog Agri Sub Division Sepahijala District.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil

Earth work in excavation by mechanicl means ( Hydrolic excavetor)/manual means over areas exceeding 30 cm in depth, 1.5 m in width or 10 sqm on plan) including disposal of excavated soil lead of 50 m. and lift upto 1.5 m , disposal earth to be leveled and neatly dressed. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: a) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: (1:2:4)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level: 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Centering shuttering including struttings, propping etc. and removal of form work for: a) Foundations, footings, bases for columns.

Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank

Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto floor five level.Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars

Providing structural Steel work riveted , bolted or welded in built up section , trusses and framed work , including cutting hoisting fixing in position and applying a primin coat of approved steel primer all complete as required.

6 mm cement plaster of mix In cement mortar 1:4 ( 1 cement : 4 fine sand ).

Steel work r wellded in built up sections/framed work , including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete as required.

Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.67 kg/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete(payment shall be made after submission of test certificate issued by manufacturer). New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint ( two or more coats) of required colour of approved brand and manufacture on new work to give an even shade.(Payment shall be made after submission of test certificate issued by the manufacturer) -Two or more coats on new work

Providing and fixing Chain link wire mesh 1.5 m height of SWG with 4"x4" (10 cm x 10 cm) specing welded with MS 40 x 40 x 6 mm angle and MS Flat complete as per direction of the Engineer -in-charge ( Frame work to paid seperately).