Supply, Fitting and Fixing of Furniture, Gypsun board for False Ceiling, Electrification work etc.

Financial Proposal As per the Financial Forms Provided with Bid document Format of Financial quote is show in he table below:- 1. False Ceiling and Partition of Development Cell

SL.NO. DISCRIPTION OF WORK Unit Quantiy Rate Rate quoted by the manufaturer/ Company/Agency/Bidder

1 FALSE CEILING :Providing and fixing gypsum board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc | coating of 120 gms/sqm (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate GI. channels 45x1 5x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to GI. intermediate channel with connecting clips made out of 2.64 mm dia x 230 all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board . sft 882 0

2 PARTITION: Alluminium Partion with door sft 221 0

3 ELECTRIFICATION WITH LIGHTNING : sft 882 0

Total Amount 0.00

2. False Ceiling and Partition of IQAC

SL.NO. DISCRIPTION OF WORK Unit Quantiy RATE Rate quoted by the manufaturer/ Company/Agency/Bidder

1 FALSE CEILING :Providing and fixing gypsum board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc | coating of 120 gms/sqm (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate GI. channels 45x1 5x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to GI. intermediate channel with connecting clips made out of 2.64 mm dia x 230 all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board . sft 651 0.00

2 ELECTRIFICATION WITH LIGHTNING : sft 651 0.00

Total Amount 0.00

3. Furniture for Develoment Cell

Sl No. Image Specification Unit Qty Rate Rate quoted by the manufaturer/ Company/Agency/Bidder

1 1800x750x750 Supplying and placing in position office table of the following specifications. 1800W X 750D X 750H 400W X 450D X 640H(pedestal) Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+ Each 1 0.00

2 Type of chair:High Back,Tilt mechanism:Synchronic tilt mechanism,Locking mechanism:3 Position locking, Seat depth: adjustment ,Fixed type:Revolving mechanism,Designed with 360 degree-revolving type:Pedestal base, Aluminium die cast, Minimum thickness (in mm) of MS Plate Joining the backrest with seat of the chaiR:2 millimeterSeat material:PU foam, Density of PU used in seat (kg per cubic meter):>40<=50, Thickness of PU used in seat (mm):>40<=50, Minimum seat height from floor surface (mm):>400<=500,Width of seat (mm):>500, Depth of seat (mm):>500, Seat upholstery material:Leatherette, Backrest type: Flexi back, Backrest height:Fixed, Backrest support type:Contoured back / Without lumber support: Backrest base frame material, Hot pressed plywood Density of PU used in backrest (kg per cubicmeter) : >40<=50, Thickness of PU used in backrest (mm): >40<=50, Width of backrest (mm): >500, Backrest height from the seat level: >550, Backrest upholstery material: Leatherette, Armrest type and arm movement :Adjustable (Up and Down, Front and Back), Warranty period in number of years:1 year. Each 1 0.00

3 Providing, supplying and placing of Visitor.CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair.SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression.M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The powder coated (DFT 40-60micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mountedon to a tubular frame. WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM. This product should be certified by Greenguard. Each 8 0.00

4 1200x600x750 The Style table provides concealed and open storage options to systematically organize your essential files and books,Its sturdy PLT make, the Stylo Main Desk is your best bet if you're looking for a durable work desk,Dimensions W x H x D (cm): 120 x 75 x 60, Finish Color:Multiple Color Options, Frame Material:Particle Board, Table Top Material:Particle Board. Each 1 0.00

5 SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured. upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. MID BACK SIZE 47.5 cm. (W) x 58.0 cm. (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM : The mechanism is designed with the following features: ·360° revolving type. · Upight position locking · Tilt tension adjustmen. ·Seat/back tilting ratio of1:3. TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY : The bellow is 3-piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33%glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-centre dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. Overall Dimensions of Chair WIDTH (W): 76.3 CM. DEPTH (D): 76.3 CM. HEIGHT (H): 85.5-97.5 CM. SEAT HEIGHT (SH): 42.5-54.5 CM. Each 1 0.00

6 (3+1+1) Dimensions W x H x D (cm): 175 x 83 x 86, Finish Color: Black, Upholstery Material: Synthetic Leather, Warranty: 1 Year Warranty, The sofa offers generous lumbar support, which engulfs your entire back area. This helps your back receive optimum support and gives you a comfortable seating experience, It features a synthetic leather upholstery, giving it a smooth and rich finish. You can easily clean the surface, as it does not let dust accumulate, The mattress is made from soft foam, increasing the level of comfort it provides. The recron filling inside only adds to its comfort and support, for a luxurious seating, The ground elevation of the sofa facilitates easy cleaning underneath the sofa. It also makes it easy to access objects that have accidentally rolled under.The Pinewood frame of the sofa is not just responsible for its good looks. With impeccable strength, it can withstand rough usage. Each 1 0.00

7 Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLE LEGS METERIALS:Color :cherry, TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm), L X W X T : 1000x650x10mm Color : clear FINISHING:MDF + PU Each 1 0.00

Total Amount 0.00

4. Furniture for IQAC

Sl No. Image Specification Unit Qty Rate Rate quoted by the manufaturer/ Company/Agency/Bidder

1 1800x750x750 Supplying and placing in position office table of the following specifications. 1800W X 750D X 750H 400W X 450D X 640H(pedestal) Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+ Each 1 0.00

2 Type of chair:High Back,Tilt mechanism:Synchronic tilt mechanism,Locking mechanism:3 Position locking, Seat depth: adjustment ,Fixed type:Revolving mechanism,Designed with 360 degree-revolving type:Pedestal base, Aluminium die cast, Minimum thickness (in mm) of MS Plate Joining the backrest with seat of the chaiR:2 millimeterSeat material:PU foam, Density of PU used in seat (kg per cubic meter):>40<=50, Thickness of PU used in seat (mm):>40<=50, Minimum seat height from floor surface (mm):>400<=500,Width of seat (mm):>500, Depth of seat (mm):>500, Seat upholstery material:Leatherette, Backrest type: Flexi back, Backrest height:Fixed, Backrest support type:Contoured back / Without lumber support: Backrest base frame material, Hot pressed plywood Density of PU used in backrest (kg per cubicmeter) : >40<=50, Thickness of PU used in backrest (mm): >40<=50, Width of backrest (mm): >500, Backrest height from the seat level: >550, Backrest upholstery material: Leatherette, Armrest type and arm movement :Adjustable (Up and Down, Front and Back), Warranty period in number of years:1 year. Each 1 0.00

3 Providing, supplying and placing of Visitor.CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair.SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression.M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The powder coated (DFT 40-60micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mountedon to a tubular frame. WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM. This product should be certified by Greenguard. Each 8 0.00

4 1200x600x750 The Style table provides concealed and open storage options to systematically organize your essential files and books,Its sturdy PLT make, the Stylo Main Desk is your best bet if you're looking for a durable work desk,Dimensions W x H x D (cm): 120 x 75 x 60, Finish Color:Multiple Color Options, Frame Material:Particle Board, Table Top Material:Particle Board. Each 1 0.00

5 SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured. upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. MID BACK SIZE 47.5 cm. (W) x 58.0 cm. (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM : The mechanism is designed with the following features: ·360° revolving type. · Upight position locking · Tilt tension adjustmen. ·Seat/back tilting ratio of1:3. TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY : The bellow is 3-piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33%glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-centre dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. Overall Dimensions of Chair WIDTH (W): 76.3 CM. DEPTH (D): 76.3 CM. HEIGHT (H): 85.5-97.5 CM. SEAT HEIGHT (SH): 42.5-54.5 CM. Each 1 0.00

6 (3+1+1) Dimensions W x H x D (cm): 175 x 83 x 86, Finish Color: Black, Upholstery Material: Synthetic Leather, Warranty: 1 Year Warranty, The sofa offers generous lumbar support, which engulfs your entire back area. This helps your back receive optimum support and gives you a comfortable seating experience, It features a synthetic leather upholstery, giving it a smooth and rich finish. You can easily clean the surface, as it does not let dust accumulate, The mattress is made from soft foam, increasing the level of comfort it provides. The recron filling inside only adds to its comfort and support, for a luxurious seating, The ground elevation of the sofa facilitates easy cleaning underneath the sofa. It also makes it easy to access objects that have accidentally rolled under.The Pinewood frame of the sofa is not just responsible for its good looks. With impeccable strength, it can withstand rough usage. Each 1 0.00

7 Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLE LEGS METERIALS:Color :cherry, TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm), L X W X T : 1000x650x10mm Color : clear FINISHING:MDF + PU Each 1 0.00

Total Amount 0.00