CWE/FZR- /2022-23 Special repair to cook house No 01, 02 and 03 of trg unit area of CETC at Doraha under GE Ludhiana.

Amount

Demolition of cement concrete (unreinforced) concrete in ground floors and paving n.exc 15cm thickness (below or above ground floors.) complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

Material and labour Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial item No 3 here-in-before above but in shirting/doddo laid over 10mm thick cement screed in cm 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and Labour Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.06 Sqm but n.exc 0.11 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.

Material and labour Glazed ceramic coloured designer pattern tiles / printed tiles 450X350X7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 50mm thick cement conc one 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour 25mm thick cement concrete type B-O, 1:2:4 (20mm graded agg ) as in flooring finished even and fair complete all as specified and as directed by Engineer-in-Charge.

Material and labour 40mm thick cemnt concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in floorings , finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge laid in alternate bay.

Material and labour machine cut kota stone 20-25mm thick as in slab, flooring & tread of steps over 15mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Material and labour machine cut kota stone 20-25mm thick as in slab, flooring & tread of steps over 15mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing (Except stone) complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial item No 11 here-in-before above as item No 11 above but in riser of steps, skirting & dado laid over 10mm thick cement screed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour Endura ceramic tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 cement complete all as specified and as directed by Engineer-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar atc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for granite 20mm thick(table rubbed and polished) in cooking plateform and like in cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required complete all as directed by Engineer-in-charge.

Material and labour for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement morte 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete. (note: wlded mesh to be paid separately complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour 15mm thick plastering on fair faces of bricks or cone surfaces finished even and smooth w/o using extra cement in cm1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour 5mm thick plastering on fair faces ofr cone surfaces finished even and smooth w/o using extra cement in cm1:3 on ceiling complete all as specified and as directed by Engineer-in-Charge.

Material and labour 15mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement in cm1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour Preparing of new surface of plaster and applying three coats of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.

Material and labour Preparing of new plastered surface walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour two coats of Oil bound distemper over a coat of chalk whiting on wall surfaces inclduing prepration of newly plastere surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour Preparing of new plastered surface and applying two coats cement base paints on walls complete all as specified and as directed by Engineer-in-Charge.

Material and labour Complete removal of existing treatment and applying two coats of cement base paint of walls complete all as specified and as directed by Engineer-in-Charge.

Material and labour Complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of chalk whiting on wall surfaces inclduing prepration complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying two coat (finishing coat) of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Material and labour two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer including prepration of newly untreates surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or grith not other wise described. complete all as specified and as directed by Engineer-in-Charge.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 20mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixingTube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Complet all serial item No 32 here in before 20mm bore complete all as specified and as directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore complete all as specified and as directed by Engineer-in-Charge.

complete all specified in serial item No 34 here in before all as per above item but 20mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Bib taps long nose with flange CP 15mm dia Make Prayag, Jaguar cera or equivalent complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing stop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for union and fixed 15mm bore fixed in repair.

Supply and fixing stop cock /Angle cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore.

Supply and fixing as in repairs Pillar taps, Fancy type cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing as in repairs PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve flaot and handle including brackets. 10 ltr capacity complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aliminished hinging device fixed in repair complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Viterous china wash down water closet pan(pedestal pattern) white (excluding fixing bolts, flushing cistern and floor pipe) fixing in repairs EWC complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing viterous china squartting pan orrisa pattern , size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC shower roses with or without swivel joint 75mm size incl fixing to steel pipe in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed in repair 20mm bore complete all as specified and as directed by Engineer-in-Charge.

Material and labour for stainless steel sink with draining board made of 1.00mm thick sheet for kitchen with plug , washer waste pipe cast iron cantilever bracket connecting union overall size 915mmx 460mm with bowl size 330mm x160mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing CP grating 150mm dia with centre hole openable all as specified and directed by Engr-in-Charge

Material and labour for PVC bath room cabinet of size 535 x 483 mm x 110 mm with mirror complete all as specified and as directed by Engineer-in-Charge.

Material and labour for stainless steel plate rack of superior quality size 36" x 36" with not less than 8 kg complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1,including dismanteling water tanks and removing to store complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs Rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1,,including dismanteling water tanks and removing to storecomplete all as specified and as directed by Engineer-in-Charge.

Supply and fixing brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge. .

Supply and fixing 32mm dia waste pipe for WHB complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing brass chromium plated Jet to EWC complete all as specified and as directed by Engineer-in-Charge.

Taking down chowket or frame with shutter(without taking off shutter from frame) exc 1.5Sqm and nexc 4Sqm complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial item No 59 here in before all as per above but n -exc 1.5 Sqm Each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and refixing in the same opening after easing and minor adjustment.

Supply and fixing pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats complete all as specified and as directed by Engineer-in-Charge.

Framed work as in doors or gate,coolers stand of angle or others section etc confirming to Fe 410-s complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing solid PVC door frame of sixe 50mmx47mm made out of 5mm wood grain printed PVC Sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail; panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete as specified, as shown in drawing and as directed by Engineer-in-charge.

Supply and fixing factory made 2nd class hard wood rail & style 35mm thick panelled shutter (Any no of planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

Glazed and skeleton shutters open rebated and prepared to receive (glass) gauze (without sash bars) edges of framing plain chamfered or rounted fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified 35mm thick 2nd class HW complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame including punching or drilling out old glazing pins and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Square meter Each pane complete all as specified and as directed by Engineer-in-Charge.

Material and labour above but Frosted glass glazing with oil putty in square nexc 0.5 Sqm Each pane complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for Each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. make/manufacture by 1. M/S Tee Pee enterprises, Amritsar 2. M/S Ram Fabricator 'P' ltd Panchkula. Note: wire mesh and painting shall be measured & paid separately under appropriate item complete all as specified and as directed by Engineer-in-Charge.

Complete as per serial item No 75 here in before but allasper above but glazed complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing steel windows or steel ventilators fixed type with glazing bar complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel framed work such as grills, framed guard bars, grating and like confirming to FE 410 or FE 310 complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Glavanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial item No 79 but for steel windows including taking out old/rusted wire cloth from steel windows either cutting or taking out galvanised wire staples and provisioning/securing the wire cloth to steel windows as per existing specification complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Aluminium anodised barrel tower bolts of extruded section and fixed 150mm long.

Supply and fixing Aluminium handles cast type anodised 150mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair door helical spring mild steel 300mm, ordinary rat tail rod patteren including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

Aluminium alloy anodised sliding door with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrudedsection or cast aluminium alloy and fixed 250mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long.

Taking down curatain rods along with wooden pallmate laid on wall complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair curtain rod made out of mild steel 25mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing plastic finial of 28 to 29mm bore, decorated type, of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel prepainted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling brick tiles or terracing tiles sinlge layer on roofs complete all as specified and as directed by Engineer-in-Charge.

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part there of) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for wire brushing neat cement slurry with 3kg of cement per sq m at top and bottom of base coat and cleaning top surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40. complete all as specified complete all as specified and as directed by Engineer-in-Charge.

Material and labour 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound , finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note :-water proofing compound will be measured and paid separately under other item.

Supply only integral water proofing compound.

Priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot complete all as specified and as directed by Engineer-in-Charge.

Material and labour providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application complete all as specified and as directed by Engineer-in-Charge.

Material and labour 40mm thick brick tiles laid on Screed bed of cement mortar (1:4) 15mm thick finished even and fair and joints grouted flush in cement mortar 1:3 mixed with 5% 0f crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial Item No 99 here in before but except tiles complete all as specified and as directed by Engineer-in-Charge.

Material and labour flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3 complete all as specified and as directed by Engineer-in-Charge.

Material & labour PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, benching rounded or chamfered on edges complete complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick built in cm including all quoins arches pillars etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour Brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cm 1:6 complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial item No 104 here in before but except bricks

Taking down eaves gutter and rain water pipes (of any size and patern), incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) bends 110 mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) `P' trap 110 mm dia complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 18/19mm block boards grade two, interior grade, commercial type and fixed to timber frame work with screws complete all as specified and as directed by Engineer-in-Charge.

Material and labour 2nd class HWPlain fillets.square,rectangular or triangular in section, exc 13 & nexc 23 sqcm, clean sawn, secured with nails or brads complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing anodised aluminium snap grid work of size 605 x 605 mm for false ceiling complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 4mm thick E classic board tiles as in ceiling 600x600x4mm thick fixed with 3.15mm dia GI suspenders @ 600x600 c/c both ways including neccessary galvanized iron powder coated frame work at size 28x24x0.9mm thick main and supplimentry joint and 24x24x0.9mm thick angle at corners (model E-Board classic of everast) complete etc all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement corrugated sheet in roof covering complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings (Framed work) 40 sq. cm and over in section, in any position complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) quality A complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.

Material and labour reinforced Cement Concrete type B1 1:2:4 (nominal mix ) (using 20 mm graded stone aggregate) in Cooking platform,RCC self etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing use and waste rough finished flat Form work to ssoffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engineer-in-Charge.

Material and labour mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing pre-cast cement concrete type B1 1:2:4 (nominal mix ) (using 20 mm graded stone aggregate) as in cover slab for manholes etc using 20mm graded stone aggregate. Set in cement 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cleaning and removing sludge/soil mud, etc at blockage of sewage pipe of 100mm to 150mm bore by rodding manually from both side at manhole/gully trap of any depth/size and flushing with water till clear flow of water is observed at the lines, complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully point wiring copper/ aluminium (light, fan, socket, power) complete including switches, ceiling roses , pendants, regulators , sockets etc and removing materials to store and making good the disturbed surfaces of walls, floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring with PVC FRLS unsheathed, fire resistance, stranded copper conductor of size 1.5 sqmm (nominal cross sectional area ) single core cable in and including concealed (surface only on roof & colomns) wiring incl PVC conduit medium grade, ISI marked, 20 mm or higher dia complete with all accessorieSupply and fixingittings and sunkan MS boxes of thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with brass screws & washers including unsheathed single core PVC insulated cable green in colour 1.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, One light / fan point controlled by one , one way 5/6 switch. complete all as specified & directed by Engineer-in-Charge.

Complete as per item No 02here-in-before above but One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, oneway switch single pole 5/6Amps

Complete as per item No 02 here-in-before above but one socket 5/6 Amps on the same board with other switches /socket.

All as per srl item No. 02 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type white /ivory finish 5/6 Amps, single pole one way complete all as specified & directed by Engineer In-charge .

Supply and fixing switch piano flush type white /ivory finish 15/16 Amps single pole one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type complete all as specified and as directed by Engineer-in-Charge.

Complete all as per serial item No 133 here-in-before above but 3 pin 5/6 Amps & 3 pin 15/16 Amps complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing lamp holder, straight or angle ,including 7 watt LED Bulb retrofit B-22 holder base with poly carbonate diffuser and aluminium heat sink type complete all as specified & as directed by Engineer in Charge.

Supply and fixing ceiling rose surface Bakelite AC 220/240 volts 3 terminals complete all as specified & as directed by Engineer-in-charge.

Supply and fixing Decorative ultra slim linear LED lighting fixture 18/20 watt (4 Ft) with co extruded polycorbonate body, environmental friendly, energy efficient, including tube rod and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr - in - Charge.

Supply and fixing fan regulator , flush stepped type ,electronic ,230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB, single pole 240 Volts 6 to 32 Amps complete all as specified & as directed by Engineer-In-charge.

Supply and fixing Isolator single pole and neutral 240 Volts 40 Amps complete all as specified & as directed by Engineer-In-charge.

S& F sheet metal enclosure for DB , eight way , double door type, SPN, with 200 Amps bus bar , 240 Volts suitable for housing MCBs and isolator and making good,replastring to match with existing surface etc complete all as specified & directed by Engineer-In-charge.

Supply and fixing sheet metail enclosure for DB , four way , double door type, SPN, with 200 Amps rated bus bar , 240 Volts suitable for housing MCBs and isolator and making good, replastring to match with existing surface etc complete all as specified & directed by Engineer-In-charge.

M & L for sub main wiring with two run of 4 Sqmm (nominal cross sectional area ) of single core unsheathed PVC insulated cables 1100 Volts grade multi stranded copper conductor drawn through & including non metallic rigid PVC conduit of size 19/20 mm or higher dia with & including necessary conduit accessories concealed/surface only on roof & colomn) type including one run of 4 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly complete all as specified & directed by Engineer-In-charge.

Material and labour for energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65/66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India only complete all as specified and as directed by Engineer-in-Chage. Note: (i) Contractor shall be provided 2 years written manufacturer's guarantee for the LED fixture complete including driver from the certified date of completion.

Taking down carefully ceiling fan 1200/1400 mm sweep and refixing after repair/replaceing unservicable parts/servicing and painting work at existing location Complete all as specified & directed by Engineer in Charge.

Rewinding of U/S ceiling fans of size1200/ 1400mm sweep with approved copper enamelled wire of suitable gauge, varnishing, replacing existing split pins, rubber insulator,ball bearing,bush, capacitor 2.5 Mfd of and testing complete all as directed by Engineer-in-Charge.

Painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified & as directed by Engineer-in-Charge.

Taking down carefully exhaust fan 300/450 mm sweep and refixing after repair/replaceing unservicable parts/servicing and painting work at existing location Complete all as specified & as directed by Engineer in Charge.

Rewinding of U/S exhaust fans of size 300/450 mm sweep with approved copper enamelled wire of suitable gauge, varnishing, replacing existing split pins, rubber insulator,ball bearing,bush etc and testing complete all as directed by Engineer-in-charge.

Painting of exhaust fan complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified & as directed by Engineer-in-Charge.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable of LT under ground cable complete all as specified and directed by Engineer-in-Charge.

Material and labour sand cushioning for under ground cable 23 cm thick (one layer of 8cm thickness before laying the cable and other layer of 15cm thickness after laying the cable) all as specified and directed by Engineer-in-Charge.

Material and labour brick protection with old size sub class 'B' bricks laid flat across the route of underground cable all as specified and as directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & as directed by Engineer-in-charge.

Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & as directed by Engineer-in-charge .

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 10 Sqmm 2 core complete all as specified & as directed by Engineer-in-Charge.

Supply and laying XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 35 Sqmm 3.5 core complete all as specified & as directed by Engineer-in-Charge.

Supply and fixing GI tubing 'Light' grade for cable protection fixed in poles/walls/laid under roads crossing etc of 40 mm bore size complete all as specified and as directed by Engr-in-Charge

Material and labour for earthling complete with galvanized steel earth plate, electrode 600 x 600x6 mm thick , buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the plate at a depth of not less than 1.5 below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanized earth lead 4.0 mm dia (8 SWG) by means of nuts, bolts, check nuts & washers, of galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15 mm dia and water pipe 20mm dia GI light grade with funel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-2 and CI cover with frame all as Shown in MES Schedule Part-I complete all as specified & as directed by Engineer-in-Charge. Note :- (1) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber and water pipe shall be provided in slanting position. (2) On testing, after completion of Job , if desired earth resistance is not obtained , the earthing shall be redone at no extra cost to contractor.

M/s R.N Construction Co.

GURPARTAP SINGH GULATI

CHOUDHARY ENTERPRISES

ANUJ ABROL CONTRACTOR

PK ENTERPRISES