Re-Conditioning, Operation & Maintenance of Street Lights at Koorgalli, Belawadi, Hootgallli Industrial Area of Mysuru District.

Re-Conditioning, Operation & Maintenance of Street Lights at Koorgalli, Belawadi, Hootgallli Industrial Area of Mysuru District.

Part-A: Repair & Reconditioning: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed s...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers, complete with all lead and lift etc, as per specification and direction of E...

Supplying Heavy Duty Copper Terminal Long Barrels 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fabricating, supplying and erection of 9 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includ...

Supplying and fixing hot dip galvanized M.S. bracket suitable for outdoor luminaries and mounted on octogonal pole using necessary bolts, nuts etc.,. Complete. Single arm bracket with 1500mm standard ...

Supply of LED Streetlight luminaries with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyc...

Fixing Halogen/metal hallide/SVL/IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires., complete with all lead and lift etc...

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...

Supplying Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable,Up to 4C x 50 Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 25 Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut out sand other equipment son the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit. The pit should b...

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable a)2.5 to 25 Sqmm, complete with all lead and lift etc, ...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5 ...

Supply & installatioon of CCMS-10KVA, Rated Input voltage, 240 Volts & 415V AC, 50Hz, KVA Rating upto 10KVA, Current rating - 12A/24A/32A (Single & Three phase), connection single three phase-2 wire /...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Dismantling of existing old corrogated/ scrap Streetlights pole of height 9 mtr , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Part- B Maintenance work: Operation and annual maintainance of LED street lights system including replacement of damaged/failed/fused out components like LED drivers. LED array, MCPCB, surge protectiv...