Box Cricket Game beneath the Overbridge near Narasang Tekri at Porbandar (2nd Attempt)

NAME OF WORK : Construction of a Box Cricket Ground beneath the Overbridge near Narasang Tekri, including all necessary civil

works, flooring, fencing, and allied facilities.

Quantity Discription of Item Rate Unit Amount

Demolition and disposal of unserviceable materials with all lead and

lift.(i) Lime concrete.

SOR Item No 20001A

Excavation for foundation upto 1.5 m depth including sorting out and

2 174.00 stacking of useful materials and disposing off the excavated stuff upto 128.79 CUM ₹

50 Meter lead.(A) Loose or soft soil

SOR Item No 04001A

Removal and Carting of Excavated stuff and laying within 5 km

porbandar limit as directed by Engineer in charge

Carting Statement 5A Quarry of material of Earth pg no 254pdf

Filling in foundation and plinth with murrum or selected soil in layers of

4 162.00 20cm. thickness including watering, ramming and consolidating etc. 307.41 CUM ₹

SOR Item No 04008A

Providing & laying spreading and compacting 200mm thick WBM Grade -

I of B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%)

filler i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at

the rate 0.08 cumt. including spreading in uniform thickness, hand

packing, rolling with vibratory roller 8-10 tonnes in stages to proper

grade and camber, applying and brooming type of screning/binding

materials to fill up the interstices of coarse aggregate, watering and

compacting to the required density.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

6 60.00 sand : 4- graded stone aggregates 20 mm nominal size) and curing 3842.91 CUM ₹

complete excluding cost of formwork in (A) Foundation and Plinth

SOR Item No 05010AA

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns

and Mass concrete

SOR Item No 05024AA

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns

and Mass concrete.

SOR Item No 05025AA

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M300 grade

10 120.00 concret as per approved design and including excavation for fixing in 419.96 Rmt ₹

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

SOR Item No 14023A

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (D) Columns, Pillars posts and struts, upto

floor two level.

SOR Item No 05025DA

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

SOR Item No 05014C

Providing fusion bonded Epoxy coating not less than 175 micron

thickness and up to 300 micron to reinforcement bars as per IS-13620-

1993/ASTM-775 M including testing of coating at plant and all taxes (A)

10mm to 16mm dia bar

SOR Item No 10064B

Supply, Installation and Fixing of 40 mm Synthetic Cricket Pitch Turf –

Providing, laying and fixing 40 mm thick high-density synthetic cricket

pitch turf made of UV-stabilized polyethylene / polypropylene

monofilament yarn tufted on reinforced backing, having a minimum

density of 9,000–12,000 stitches per sqm, suitable for cricket

applications with proper bounce, pace and non-directional playability.

The work shall include site preparation, leveling and compacting of the

sub-grade, providing and laying compacted granular-base as required

for a smooth, firm and even surface, unrolling, aligning, cutting and

trimming of turf to size and shape, joining with approved adhesive /

joining tape to make seamless joints, securing edges to prevent curling

or displacement and ensuring perfect finish. Turf shall be UV resistant,

weatherproof, and conform to international practice pitch standards (ICC

/ FIFA / FIH guidelines) and shall be installed strictly as per

manufacturer’s recommendations and as directed by the Engineer-in-

Providing and supplying Precast wet cast reinforced concrete bollards

of size 250 × 250 × 900 mm in natural grey colour (without pigment),

manufactured with high-quality materials and internal steel

15 8.00 reinforcement to ensure strength, durability, smooth finish, and long 2142.00 No ₹

service life, suitable for pedestrian protection, traffic management, and

security applications in high-traffic areas, on supply-only basis, complete

as directed and in accordance with the Engineer-in-Charge

White Stone Bela mesonry block in course in superstructure with stone

16 53.00 of approved quality in Lime Mortar 1:5 (1- Cement :5- course sand) 4158.02 CUM ₹

including packing the joints etc. complete.

SOR Item No 05024AA

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

17 146.00 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 1198.64 Sqmt ₹

pigment to match the shade of slab including rubbing and polishing etc.

SOR Item No 14013 A

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

SOR Item No 17002A

Fabrication, supply, and fixing of 80-micron (80mic) Hot Dip Galvanized

Iron (GI) grill work as per approved design, including cutting, welding,

19 9658.00 grinding, anchoring with base plates and grouting, ensuring proper 160.00 Kg ₹

alignment and completing all related works as directed by Engineer-in-

Fabrication, supply, installation, and fixing of HDPE Box Cricket Net

(Medium size) made from 20 mm mesh, manufactured from high-

strength, UV-stabilized High Density Polyethylene (HDPE) material,

conforming to relevant IS standards and approved specifications,

20 660.00 including providing and erecting supporting structural framework as per 120.00 SQMT ₹

approved design and drawings. The work shall include cutting, stitching,

tying, edge reinforcement, fastening with suitable clamps, hooks,

binding wires, or nylon ropes, and securely fixing the net to supporting

GI/steel frame or poles.

Applying priming coat of over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil grease,

21 202.00 dirt and other foreign mater and scoured with brushes fine steel wool, 38.15 sqmt ₹

scrapers and sand paper with ready mixed priming paint brushing red

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Extra over item 7 and 11 for every subsequent coat of Paint

Providing, supplying, and fixing Surface Mount Stainless Steel Bench

with Back Rest of overall length 1300 mm (3-seater) conforming to

RDSO Specification (Item No. 172040 & 172050 of USSOR), fabricated

from 304 grade stainless steel conforming to IS:6911 / ASTM

A240/A240M, with seat and backrest connecting pipe of 40 mm dia ×

mm thickness, backrest width 300 mm, clear height 890 mm, including

all fittings, fasteners, installation on prepared surface, furnishing

confirmatory test reports for stainless steel grade, ensuring OEM is ISO

9001:2015 certified, and completing the work in all respects as per

specification and direction of Engineer-in-Charge.

Finishing wall with water proofing cement paint of on wall surfaces (Two

coats) to give an approved brand and manufacture and of required

shape even shade after thoroughly brushing the surface to remove all

dirt and remains of loose powered materials

SOR 2024-25 It.No.

Providing and Fixing of Approved Laser-Cut Design with GI Plate and GI

Frame – Supplying, fabricating, and fixing approved laser-cut decorative

design panels made from 3 mm thick GI plate (hot-dip galvanized,

minimum 80 gsm zinc coating) cut to the required pattern using CNC

laser cutting for smooth, precise edges, free from burrs or sharp

projections, and mounted on a supporting GI frame fabricated from hot-

dip galvanized hollow sections / angles of required size and thickness

25 10.00 conforming to IS:4923 / IS:1161. The work shall include fabrication, 4948.00 Sq mt ₹

welding / bolting of frame, surface cleaning, applying one coat of zinc-

rich epoxy primer and two coats of synthetic enamel / PU paint of

approved shade (or powder coating if specified), and fixing in position

with proper anchoring arrangement to wall / floor as per approved

drawing. The entire installation shall ensure proper alignment, level,

plumb, and aesthetically pleasing finish, strictly following approved

design and as directed by the Engineer-in-Charge.

Repairing the existing rainwater spout pipeline under flyover, including

tracing the line, clearing blockages, carrying out necessary repairs,

26 160.00 extending the pipeline up to the designated outfall point at the drainage 890.00 Rmt ₹

area, and completing all associated labour, fittings, and allied works as

directed by the Engineer-in-Charge.

The agency shall carry out the work at a height of approximately

metres by means of a hydraulic crane or other suitable vehicle, with all

such arrangements to be made by the agency at its own cost and

scope. All electrical connections, safety measures, and allied

arrangements required for execution shall also be in the scope of the

agency. The work shall be carried out strictly as clarified and approved

by the Engineer-in-Charge.

Providing and fixing rainwater collection system by means of G.I. sheet

gutter fabricated and bent/turned to the required profile, having a width

of 0.80 metre and a minimum sheet thickness of 1.20 mm, fixed along

the full length of the roof edges under the two individual slabs of the

flyover, supported with G.I. strip clamps/brackets at suitable intervals.

The gutter shall be aligned and jointed in such a manner that the entire

rainwater collected from the roof edges is directed into the designated

rainwater collection chamber, complete with necessary cutting, bending,

jointing, sealing, and allied works as per standard specifications and as

directed by the Engineer-in-Charge.

The agency shall execute the work at a height of approximately

metres by means of a hydraulic crane or other suitable vehicle, with all

arrangements (equipment, vehicle, staging, scaffolding, safety gear,

etc.) to be made at its own cost and responsibility. All electrical

connections, lighting, safety measures, and allied arrangements

required for execution shall also be in the scope of the agency. The

work shall be carried out strictly as clarified and approved by the

Engineer-in-Charge, and payment shall be released only after such

Supply and installation of Movable and height adjustable Volleyball Pole

of Standard Height for Man & Women (2.43-2.24 mtr),Pipe Size : 3" &

3.5" with heavy duty rechet for tightening the net, weight with cover :

Weight 90 to 100 kg Each side extrs, wheel size : 6x2 inches best

quality PU spary paint with net. Pole and Net of Approved Brand as per

approved by EIC.

Providing and fixing Volleyball Net as per instructions and aprovals of

engineer in charge.

30 1.00 Providing Volley Ball 2727.00 No ₹

SITC of 6x4x8 ft 80-micron (80mic) Hot Dip Galvanized Iron (GI)

Portable Security Cabin fabricated with MS hollow section frame

(IS:4923) and 1.2 mm MS sheet cladding (IS:2062), having a sloped MS

sheet roof for rainwater drainage, MS base frame with cross members,

18 mm marine plywood flooring finished with PVC/vinyl sheet, one MS

31 1.00 sheeted door with handle and locking arrangement, one 175000.00 No ₹

aluminium/glass window for ventilation, all surfaces painted with anti-

corrosive red oxide primer and two coats of synthetic enamel paint,

provided with forklift pockets for easy shifting and (optionally) basic

electrical fittings including one LED light point, switch and 5A socket,

suitable for use as a durable, economical guard room.

PORBANDAR MUNICIPAL CORPORATION

NAME OF WORK : Construction of a Storm Water Drain Works at Box Cricket Ground beneath the Overbridge near Narasang Tekri, including all

necessary civil works, flooring, fencing, and allied facilities.

Quantity Discription of Item Rate Unit Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

SOR Item No 04001A

Removal and Carting of Excavated stuff and laying within 5 km porbandar limit as directed

by Engineer in charge

Carting Statement 5A of Earth work

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2- Coarse sand :4-stone

3 4.00 aggregate 20mm nominal size) finished smooth complete including curing and festing (i) 11042.73 Nos ₹

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg.

and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

SOR Item No 24008A

Providing bedding incl. ramming, watering, levelling, consolidating etc. Complete as per

standard and instruction of engineer incharge

As above with required quality Sand brought from outside inclduing all lead

GWSSB SOR 2022-23, Item No. 3, Part 1&2 B, Page No.

Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in

standard lengths of following class and diameter suitable for either collar joints or rubber

ring joints including all taxes, insurance, transportation, freight charges, octroi, inspection

5 24.00 charges, loading, unloading, conveyance to departmental stores, stacking etc. & Lowering, 2332.20 RMT ₹

laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in proper position,

grade and alignment at all level as directed by Engineer-in-charge including conveyance

from stores to site of work, labour, giving hydraulic testing as per ISI code.

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length socketed

pipe, cost included in rates below.

Box Cricket Ground beneath (F2) 400 mm dia (NP4 Class)

GWSSB SOR 2022-23, Item No. 10.1.D & 10.1.E, Part 1&2 A, Page No. 15 & Item No. 11.b,

Part 1&2 B, Page No.

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

stuff as directed within a radius of 3 km.

GWSSB SOR 2022-23 Section 1&2 B, Item No. 14, Page No.

7 2.00 Tracing of old Manhole. All Types Of Manhole at Every 15 Mt. 1214.00 Nos ₹

As Per Market Rate

PORBANDAR MUNICIPAL CORPORATION

Name of Work:- ELECTRICAL WORK at Box Cricket Ground beneath the Overbridge near Narasang Tekri, including all necessary civil works,

flooring, fencing, and allied facilities.

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Incomer 1 Nos. 43,183.00 ₹

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC

60947-2 with trip free mechanism, current limiting type with Thermal-Magnetic /

Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum

(GWSSB Electro-mech 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections &

1 2022-23, SEC-E, Page No. interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure

83, Item no.1.13h dimensions- 1800(H) x 600(W) x 600 (D) & following technical features:

4 Pole, 125A MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu),

Microprocessor release

MEDIUM VOLTAGE PANEL BOARD (PMCC) 1 Nos 312,021.85 ₹

SITC of PMCC Panel (50kA) complete in all respects as per SLD / Specification / IS and including

following as minimum:

(1) Two nos. FP 125A Microprocessor MCCB for I/c with Digital Voltmeter with Voltmeter

selector switch, Digital power Factor Meter, Digital Ammeter with Ammeter selector

switch,MFM with RS-485, R,Y,B,on,off,trip Indicating lamps & ON, E-STOP, Reset Pushbutton,

2) One Nos Bus Coupler FP 125A.

(2)125/200 A TPN Main busbars. (main & auxilary busbars size with current density

(4) 5 kVAR APP Type Capacitors.

(5) Three no. 63A TPN MCCB feeders (for PDB - Ground and First Floor)

(6) One no. Outdoor lighting LDB feeder with 32A TPN 'C' curve MCB with 32A contactor & Time

(7) 3nos. 200A/1A, Cl.-1 metering CT

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface 1 Nos. 2,421.00 ₹

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(R&B SOR 2023-24, Item (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

No. 3.11.5 (B-a-iii) (PPI)

(a) Double door

for Outdoor Area Lighting

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 1 Nos 3,010.00 ₹

30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature &

(R&B SOR 2023-24, Item do not incorporate any electronic component for following Max. rating erected as directed.

4 (ii) 63Amps. FP - Cat. III, Incomer

No. 3.12.2 (iii)

for Outdoor Area Lighting

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA 8 Nos 297.00 ₹

breaking capacity & confirms to IS : 8828 in existing box having following capacity

(R&B SOR 2023-24, Item Double pole 6A to 32A Cat.III

5 for Outdoor Area Lighting DB

No. 3.10.2 A Cat-III

MEDIUM VOLTAGE CABLES 40 Mtr 486.00 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

(R&B SOR 2025-26 Item for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

6 size of cables

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) (1Run for Incomer to LT Panel )

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor 10 Mtr 189.00 ₹

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

(R&B SOR 2025-26 Item size of cables

no. 4.3.5 - B (B) 4 core 25 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium 40 Mtr 125.00 ₹

(R&B SOR 2025-26 Item conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

8 following size of cables

4C x 6 sq. mm. A2XFY Cable ( For Outdoor Lighting LDB)

CABLE Gland 2 Nos. 130.00 ₹

Providing and, fixing heavy duty flange type brass double compression type cable gland with

(R&B SOR 2025-26 Item

9 rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc

for following size of cables.

(D) 3 1/2 core 95 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with 4 Nos. 66.00 ₹

rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc

(R&B SOR 2025-26 Item for following size of cables.

no. 4.6.3 - A (A) 3 & 1/2 / 4 core 25 Sq. mm (1Run for Ground Floor DB , for First and Terrace DB and

Outdoor Area Lighting DB I/C)

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Providing and, fixing heavy duty flange type brass double compression type cable gland with 2 Nos. 38.00 ₹

rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc

(R&B SOR 2025-26 Item

11 for following size of cables.

2 to 4 core 6 Sq. mm ( For Outdoor Lighting LDB)

CABLE LUGS 4 Nos. 40.00 ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

(R&B SOR 2025-26 Item

12 evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

(F) 95 Sq.mm. (1Run for Incomer to LT Panel )

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size 32 Nos. 15.00 ₹

(R&B SOR 2025-26 Item evenly crimped with high pressure tool & connected to switchgear terminals with

no. 4.7.1 - C brass/cadmium plated nut bolts in an approved manner.

(C) 4 core 25 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size 16 Nos. 6.00 ₹

(R&B SOR 2025-26 Item evenly crimped with high pressure tool & connected to switchgear terminals with

no. 4.7.1 - A brass/cadmium plated nut bolts in an approved manner.

4C x 6 sq. mm. A2XFY Cable ( For Outdoor Lighting LDB)

CABLE TRAY 20 Mtr. 357.00 ₹

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as per required and as per IS 2062/1079 and shall

be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with

(R&B SOR 2025-26 Item

15 coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support( included) as per Specification and as per instruction of engineer in charge.

(2) 100 X 50 X 1.6 mm Thick

CHEMICAL EARTHING SYSTEM 2 Nos 7,025.00 ₹

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of

mm with constant ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy duty

(R&B SOR 2025-26

16 cover.(approved make OEM has to submit test certificate including value of earth resistane of

Item no. 3.14.10 - B

[B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock,

Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

(Each for body of Incomer, Panel & PDBs, 4 Nos for DG Set)

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ 92 Kg 77.00 ₹

(R&B SOR 2025-26

17 ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Item no. 3.14.2

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 4 Kg 787.00 ₹

(R&B SOR 2025-26

Item no. 3.14.4

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI 4 Pt 632.00 ₹

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

(R&B SOR 2025-26 erected on PVC / Metallic/Wooden box, single mounting base frame covered with

19 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

Item no. 1.2.2 A

with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of 20 Pt 445.00 ₹

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base

(R&B SOR 2025-26 frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling

20 as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

Item no. 1.2.1 A

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 2 Pt 562.00 ₹

(green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with

(R&B SOR 2025-26

21 necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

Item no. 1.2.5 A

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden 25 Nos 150.00 ₹

box, single mounting base frame covered with textured / metallic/white front plate , modules

(R&B SOR 2025-26 erected with necessary connections as per site situation directed by Engineer In charge.

Item no. 1.2.6 - 1 (1)One No. SP 6 Amp. - Cat.III

(R&B SOR 2025-26 (2) One No 5 pin plug - Cat.III 5 Nos 150.00 ₹

Item no. 1.2.6 -

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden 5 Nos 51.00 ₹

box, single mounting base frame covered with textured / metallic/white front plate , modules

(R&B SOR 2025-26 erected with necessary connections as per site situation directed by Engineer In charge.

Item no. 1.2.7 - 2 (2) 16 Amp. SP one way switch - Cat.III

(R&B SOR 2025-26 (10) 6/16Amp. Universal socket - Cat.III 5 Nos 82.00 ₹

Item no. 1.2.7 -

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 475 Mtr 82.00 ₹

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling,

(R&B SOR 2025-26 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

26 continuity of following size

Item no. 1.4.1 A - A - c

(A) With medium class Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm

(R&B SOR 2025-26 (d) 3 wire 2.5 sq. mm 475 Mtr 101.00 ₹

Item no. 1.4.1 A - A - d

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium 2 Nos 2,034.00 ₹

(R&B SOR 2025-26 duty ring mounted low noise operation suitable for medium duty having following dia size and

Item no. 5.3.4 A maximum speed in RPM [A] 305 mm dia 900 RPMCat.II

SOUND SYSTEM Supplying & erecting Amplifier having following specification: Power Output 1 Ea 4,831.00 ₹

:65 W (RMS) (90 w Max.)lnputs : 4 Mics & I Auxfrequency

Response :65-13000 Hz+ 3dbTone Controls : Cut typeSpeaker Matching :4-8-16 ohms

(R&B SOR 2025-26 100 V lineThe amplifier suitable to operate 240V A.C.or 12volt D.C. (Battery) with automatic

Item no. 7.3.1 changeover from AC to Battery operation, duly protected by wrong Battery Polarity.

[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying and erecting wall mount speaker with rated power of 30 watt/power tapping 2 Ea 2,544.00 ₹

(R&B SOR 2025-26 30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound pressure level 88 dB

30 ,frequency response of 70Hz to 20KHz [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

LED LIGHT: 4 Nos 187.00 ₹

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,

(R&B SOR 2025-26 minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,

Item no. 2.15.2 A mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(iii) 10 to 15 watts

32 (iv) 16 to 20 watts - Cat-lll 4 Nos 256.00 ₹

33 (v) 21 to 30 watts - Cat-lll 4 Nos 400.00 ₹

Supplying and erecting approved make oscillating type medium duty bracket fan with 4 Nos 3,484.00 ₹

Aluminium Blades A.C. 23OV. 50cy/s, with thermal overload protection wall mounted with

(R&B SOR 2025-26 height adjustment and rotary tilting device complete with guard, pull cord for speed and

Item no. 5.4.4 a oscillation flexible Core plug top complete erected with lead wires as directed. (a) 450mm

Supplying and erecting LED street light / Flood light fittings with High power White LEDs 10 Nos. 5,143.00 ₹

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

(R&B SOR 2025-26 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- 79 & LM-80

Item no. 2.16.2 B - i certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (i) above 40 to 48 watts

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 8 Nos 111.00 ₹

(R&B SOR 2025-26 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming

Item no. 3.10.1B to IS 8828/1996 with ISI Mark Cat.III

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per 1 Nos 49,069.00 ₹

hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a

(R&B SOR 2025-26 hour, The water cooler should be comprising of hermetically sealed compressor, fan motor,

37 condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete

Item no. 8.13.1

with necessary inlet & outlet connection. The body of water cooler will be made from Stainless

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. 1 Nos 15,466.00 ₹

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter

(R&B SOR 2025-26 suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto

38 low & high pressure switches with following size of storage tank & LPH capacity & erected as

Item no. 8.13.6 - B

directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

SAFETY ACCESSORIES 2 Nos 8,586.00 ₹

SITC of following safety accessories complete with necessary fixing brackets, other

accessories and tools etc. as required to complete the job.

(R&B SOR 2025-26,item Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary

no.10-2-26-B) clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with 2 Nos 212.00 ₹

(R&B SOR 2025-26,item extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with

no.10-2-5 dry-sand and kept on existing stand provided or hung on wall hook.

ITEM NO. REFERENCE DESCRIPTION QTY UNIT UNIT RATE AMOUNT

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1 Nos 933.00 ₹

1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with

( R&B SOR 2025-26,item

41 cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and

two coats of approved enamelled silver paint.

For Fire Station

Supplying stand first AID box with anticeptic cream, medicine for use on wounds due burn, 1 Nos. 297.00 ₹

( R&B SOR 2025-26,item crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for

42 medicinal user, scissors, anticeptic solution (Savlon or similar) etc. (All above contents shall be

of standard makes)

Providing printed instruction (First Aid) Chart both in English and Gujarati and duly framed 1 Nos. 129.00 ₹

( R&B SOR 2025-26,item with front glasses, for treatment of person suffering from electric shock. (1no. For LT Room)

(R&B SOR 2025-26, item Supply and laying of 4 mm thickness, Rubber Matting as per as per IS:15652/IEC 61111. (for LT 3 Sqmtr 1,017.00 ₹

no. 10-2- 3 ) - b & APFC etc. Panels)

MISCELLANEOUS: 80 kg 77.00 ₹

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting,

(R&B SOR 2025-26, item welding, grinding & finishing duly painted with one coat of red oxide with erection on site as

no. 3-16-4-A per direction of engineer in charge with necessary grouting, cementing, plastering & finishing

complete. (For Misc works like Panel Stand, RO Stand, Flood Light supporting structure etc.)

C TOTAL OF ELECTRICAL WORKS ₹

PORBANDAR MUNICIPAL CORPORATION

DISTRICT :- PORBANDAR

NAME OF WORK :- Provision Of CCTV System including all necessary alied work at Box Cricket Ground beneath the Overbridge near Narasang Tekri

Estimated Cost Rs.

Item No. & Description Quantity Rate EXCLUDING 1% L.C Per Amount

Providing and instaling IP Camera 1/2.8” Progressive Scan CMOS 2 megapixel resolution

Digital WDR, 3D DNR 50 meters IR range 12V DC±10%, ICR *power supply not included, Wall

mount bracket is included 4mm lens, PoE Camera. 2 MP IP Network Camera, 1/2.8″HD

Progressive Scan CMOS Image Sensors, 1920×1080 Resolution, DWDR (Digital Video

Dynamic Range) Up to 50 Mtr IR distance, POE Optional 3D DNR, Mobile Monitoring . Image

Sensor: 1 / 2.8 “ progressive scan CMOS Min Illumination: 0.01 Lux , 0 Lux with IR Shutter

Speed: 1/3 s to 1/1000,000 s , Supports slow shutter. 4 mm @ ( F 2.0) Horizontal Field of

View 83.6 Degree, 6 mm Lens@ (F 2.0) Horizontal Field of View 55 Degree, 8mm@ (F 2.0 )

Horizontal Field of View 38.5 Degree, 12mm@ (F 2.0 ) Horizontal Field of View 24.6 Degree,

Optional. ( Including cost of Bracket.)

CCTV including cost of connectivity OFC to CCTV Wire with all switch, wire,and

IP 67 Junction Box (Metalic) : Providing & erecting approved make street light / wall mounting

metalicjunction box compression moulded from DMC (thermoset plastic) vertical sliding cover

having locking with square head stud loop in / loop out in built terminal suitable for four core

cable, waterproof of I.P. 67 protected with clamp or bolt nut & earth bolt of following size.[B]

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable

(ELECTRIC S.O.R2022-23, I.No. 4.5.8, Pg No.72)

Providing & Laying Opticle Fiber :with 4 core high tensile strength and flexibility in compact

cable sizes. At the same time, it provides excellent optical transmission and physical

performance, Excellent quality control is achieved through intense in-house quality check and

stringent audit acceptance.

01.It is designed, manufactured and tested according to international standards

The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate

is applied over fiber cladding as optical fiber primary protective coating.

9U-NVR Reck : Usability- Network Switches/Routers/Firewall/ DVR/NVR/Audio- Visual

Equipment/Low Depth Servers Front Door- Glass Door With Key LockRear door- Not Available

due to Wall Mount Provision Rear door available For Floor Stand Rack,Side Panels- Fixed

Welded/bolted with Top/Base Frame,Cable Entry Cut- Top/ Bottom ,2 Pair Heavy Duty

(1.5/2.0mm) Vertical Mounting Rail.,Cooling Option- fan Provision mounted on Top Panel,Load

Bearing Capacity up to 25 -30 KG,Construction- Dismantle/Welded Construction Overall 1.0mm

Thick (20 gauge), Load Bearing angles are 1.6 MM,Power Distribution Unit- 4 Socket 5 &

64 CH - NVR : Dual-OS design to ensure high reliability of system running,Up to 64-ch 12 MP

IP cameras can be connected,H.265+ compression effectively reduces the storage space by

up to 75%,Full channel recording at up to 12MP resolution,HDMI1/VGA1 and HDMI2/VGA2

outputs provided,HDMI1 Video output at up to 4K (3840 × 2160) resolution,Up to 8 SATA

interfaces and 1 eSATA interface for HDD connection,10TB capacity for each HDD,16-ch

synchronous playback at up to 1080p resolutionTwo-way audio-1-ch, RCA (2.0 Vp-p, 1 k

Ω),Outgoing bandwidth 256 Mbps, or 200 Mbps (when RAID is enabled),Remote connection

128, CVBS output (Optional) 1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC:

704 × 480,Capability 2-ch @ 12 MP (20fps) / 4-ch @ 8 MP (25fps) / 8-ch @ 4MP (30fps) / 16-

ch @ 1080p (30fps),Network protocols TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP,

UPnP™, HTTPSSATA 8 SATA interfaces for 8HDDs,eSATA 1 eSATA interface,Capacity Up

to 10TB capacity for each HDD,Array type RAID0, RAID1, RAID5, RAID6, RAID10

HDD 6 TB : Engineered specifically for surveillance security systems, Supports up to 180 TB

per year work load rate ,Prioritized write-operations for maximized surveillance performance

Support for more than eight bays,

Tuned for write-intensive, low bit-rate, high stream-count applications typical to most

surveillance applications TLER and ATA streaming support Tarnish-resistant components

Disk Speed: 5400 rpm, 7200 rpm , Compatibility: storage is built to handle up to 64 cameras

per drive and is designed for 24/7, always on, high-definition surveillance security systems with

more than eight bays.Capacity up to

• Support for up to 64 cameras per drive

• AllFrameTM technology

• MTBF of up to 1.5 million hours

LED - 32 Inch :80 cm (32 inch) HD LED TV Details.Television Type Flat Panel

Samsung or equilant approved make

32 Inches, Type LED , Backlight Technology

Ratio 16:9 Dynamic Contrast Ratio

Mega Contrast Refresh Rate

60 Hz Vertical Viewing Angle

178 Degree Horizontal Viewing Angle

178 Degree Picture Processor

HyperReal Engine Color Enhancer

Wide Color Enhancer (Plus)

Wire Less Mouse : Wireless Mouse features compact design, convenient scroll wheel, and a

wireless USB receiver. The built-in USB receiver is plugged into your USB port of your device

and enables you to operate the device even from a fair distance seamlessly.

Working Principle: 2.4 GHz Radio Frequency

DPI Button: 600/1200/1600 DPI adjustable

Buttons: Left, Right, Wheel and DPI

Receiver: USB dongle

USB Receiver: Nano

Working Range: Max 10 Meters

Wheel 1 Scrolling Wheel

Power Consumption: 3V DC 15 mA

Switch/MTBF: Left/Right Button (100±gf/upto 1 kk times) and Middle Button (120±gf/upto 1 kk

Total Amounts Rs...………........ ₹

Total Amounts Rs...………........ ₹

Say Amounts Rs...………........ ₹