REPAIR TO ROOFS, FLOORING, PLINTH PROTECTION, JOINERY, PLUMBING, PLASTERING, TILING, WATER TANK CLEANING ETC AND CONNECTING ITEMS AT STN HQ, STN INSTITUTES ( SWIMMING POOL, HSOI BN MARG, SAINIK INSTITUTE, APS/APPS SCHOOL, SHOPPING COMPLEX, FLAG STAFF

Amount

Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheet with side lap as in roof, wall etc, fixed with self tapping screw (Heavy duty)/Coach Screw and neoprene or EDPM washers etc. complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame work as per specifications and drawing including dismantling of old Wall lining of any description complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L 12mm thick gypsum board false ceiling fixed with standard GI frame work with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling etc GI perimeter channel 0.55 mm thickness with to unequal flanges of 20 & 30 mm & web of 27 mm fixed for the perimeter of the wall portion using nylon sleeves and screws at 450mm etc intermediate channel 0.9mm thickness with two equal flanges of 15mm each and wed 45mm suspended from the sofit 120mm c/c with ceiling hangers with GI cleat, ceiling section 0.55mm thickness with two equal flange 26mm thick & web of 50mm fixed a cross of the intermediated channel @ 457 mm c/c with connecting clips to hold the boards ceiling hanger 0.50mm thickness with two unequal flanges of 10 mm & 25mm used to suspended intermediate channel from sofit cleat @ 1220mm centre, connecting clip 2.64 mm dia it is used to hold the ceiling section to the intermediate channel soffit cleat 0.55 mm thickness with two unequal flanges 37 mm & 25 mm and web of 25 mm used at 1220 mm c/c to the rowl plug to suspended ceiling hanger, rowl plug of 12.7mm dia used @ 1220 mm c/c in both directions, screws self drilling and tapping screws with under head cutter 25 mm and 35 mm long used to fix board to the metal frame @ 200 mm c/c ( 12mm away from the edge and 40 mm from the corners) and preparation of newly ceiling surfaces and a coat of wall care putty 3 mm thick(Average), sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper over a coat of primer etc including dismantling of old ceiling of any description complete all as specified and as directed.

S&F false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or Electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaced between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturer’s instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width including dismantling of old ceiling of any description complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M & L for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to grade Fe-410-W (Gde E 250) for fixing complete all as specified and as directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

M&L for hard core with broken bricks of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M & L for PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M & L for PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough, lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, etc. including necessary formwork (straight or curved) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M & L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.

M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded crushed stone aggregates) as in path / paving / hard standing / floor and finished the surface even and fair without using extra cement complete all as specified and as directed.

M & L for 50 mm thick PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregates) as in path / paving / hard standing / floor and finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in levelling Course, floor/paving ect and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 50 mitre distance from starting point. (ii)M&L 10mm thick screed bed in cement mortar (1:4) using water proofing compound complete all as specified. (iii)M&L applying evenly a coat of oil based bitumen primer confirming to IS-3384 on roof, canopy, chajja, parapet ( vertical surfaces etc ) @0.40 litre per sqm by the same membrane manufacturer of density 250C, 0.87 to 0.89 litre And viscosity 70-160 cps after proper cleaning of the roof surface (Horizontal/vertical) and providing APP based polymeric membrane min weighing 3.6 kg/sqm and min 3mm thick reinforced with polyester non wove fabric ( weight not less than 150 gms/sqm ) laid on primed surface with side overlap of 100mm and end overlap 150mm, using bitumen torch or by LP gas torching & sealing all joints etc and ensuring complete thermos fusing and applying one coat of aluminium paint complete all as specified and as directed. (Note:- (i) Water proofing treatment shall be done by the approved authorised applicators.

M&L for cutting out cracks to V-Section existing roofs or terracing cleaning out, wetting, grouting with cement & sand slurry (1:3) complete all as specified and as directed.

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound @ 200Ml per bag(50Kg) of cement or as per manufacture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling surface finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using Airless Paint Primer Sprayer using smart technique, on newly plastered surface of wall, cornices complete all as specified and as directed .

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using Airless Paint Primer Sprayer using smart technique on old surfaces of wall including complete removal of existing old treatment including, preparation of surfaces of wall, cornices by wire brushing, rubbing down complete all as specified and as directed .

M & L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 1.5mm thick (average) wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper complete all specified and as directed.

M&L for complete removal of existing finishes/treatment of wall and applying two coat of oil bound distemper over one coat of primer including 1.5mm thick(average) wall care putty complete all as specified and as directe.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed.

Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm n exc 2 Sqm each and refixing in the same opening after necessary repair complete all as specified and as directed.

M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain framed paneled shutter (any numbers of panel), factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS:1003 complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 30 mm thick Flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S & F 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F 75 mm size stainless steel butt hinges, complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S & F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed.

S & F in repairs, aluminium door closer (Diecast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed.

S & F in Repairs, 25mm aluminium powder coated (wood colour finished), single curtain rod( thickness not less than 1mm) including funnels etc complete all as specified and as directed.

S & F aluminium brackets( Heavy duty), powder coated of best quality as approved for fixing 25mm bore curtain rod fixed in wall complete all as specified and as directed.

S & F 150 mm size Aluminium plate type II Gate and shutter, hook & eye complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators, partitions etc. with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 12 mm thick medium density fibre board, exterior grade, fixed with screws to aluminium frame work complete all as specified and as directed.

M & L for prelaminated particle board 18/19mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M & L for coloured joint free non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors etc. over and including 15 mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, complete all as specified and as directed.

M&L for coloured joint free non skid ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed light coloured/printed ceramic tiles 350x250x7mm/450x350x7mmthick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15 mm thick screed in cement mortar (1:6) including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut Kota stone slab 20-25 mm thick in verticle surface such as riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 10 mm thick rendering in CM (1:4) including rubbing and polishing complete all as specified and as directed.

M & L for green marble work 18mm to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 20 mm thick screed bed in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

M&L for pre painted, polished chequered cement concrete tiles in floor, area exc 0.06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including screed bed of 15 mm thick cement mortar (1:4) including dismantling of old tiles of any description complete all as specified and as directed.

S & F 60 mm thick machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 M-35 Grade over and including 40 mm thick sand bed complete all as specified and as directed.

Disconnecting existing water tanks, of any description and of capacity exc 250 liters and not exc 500 liters setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing water tanks, of any description and of capacity exc 500 liters and not exc 1000 liters setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and as directed.

S and F Rotational molded PVC water storage tanks 500 litre capacity ( cylindrical vertical with closed top) hoisted and fixed in position fixed with float valve of PVC 20mm dia high pressure with polythene float and fly nut and 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or brass including dismantling of old PVC tank of any description complete all as specified and as directed.

S and F Rotational molded PVC water storage tanks 1000 litre capacity ( cylindrical vertical with closed top) hoisted and fixed in position fixed with float valve of PVC 20mm dia high pressure with polythene float and fly nut and 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or brass including dismantling of old PVC tank of any description complete all as specified and as directed.

Taking up or down 15 mm bore GI water tubing and connections including cleaning for re-fixing complete all as specified and as directed.

S & F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

Taking up or down 20 mm bore GI water tubing and connections including cleaning for re-fixing complete all as specified and as directed.

S & F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 20 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

Taking up or down 25 mm bore GI water tubing and connections including cleaning for re-fixing complete all as specified and as directed.

S & F GI tubing 25 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

S&F 32 mm low density polyethylene pipes (LDPE) of pressure rating 6 kgf/sqcm fixed to walls ceiling or in floor etc. complete all as specified and as directed.

S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore, PTMT bib taps, standard, any colour, high pressure, screwed down for iron pipe and fixed (minimum weight 105 gram) complete all as specified and as directed.

S&F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe.

S&F in repairs, 15mm bore dia of concealed stop valves cast copper alloy chromium plated, fancy type with long shank and cup screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs, fancy type Brass chromium plated 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and as directed.

S & F in repairs, toilet paper holder chromium plated fixed to wall with chromium plated brass screw complete all as specified and as directed.

S & F in repairs, chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, chromium plated centre hole wash basin mixer complete all as specified and as directed.

S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets and pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia 600mm long PVC connection pipe complete all as specified and as directed.

S & F in repairs, chromium plated waste coupling 32mm (half or full thread) complete all as specified and as directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, Vitreous china urinal, half stall white (excluding flushing cistern) including urinal spreader, 450mm long PVC connection pipe , 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and as directed.

S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets,PVC connection pipe 15mm dia, 450mm long etc complete all as specified and as directed.

S & F in repairs, PVC connection pipe 15mm bore and 450mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.

S & F in repairs, PVC connection pipe 15mm bore and 600mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.

S & F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F in repairs, 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S & F 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

S&F 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs, Cast iron 100 mm dia P or S trap complete all as specified and as directed.

S&F in repairs, Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and as directed.

Grubbing up tree trunk including cutting of trunk portion, girth of tree not exc 30 cm, protruding over ground / building / wall / root / chajja / stack pipes etc. digging out roots, and applying root killer chemical as per manufacturer's instructions, filling holes with cement mortar (1:4) or PCC 1:2:4 type B-0 and removing the unserviceable materials from the site complete all as specified and as directed.

R N CHATTERJEE (BID ID -3467402)

FALCONS INDIA (BID ID -3468547)

PIONEER TRADING (BID ID -3468289)

ABHISHEK CONSTRUCTION CO (BID ID -3467283)

SENCO (BID ID -3467281)

K. K. CONSTRUCTION (BID ID -3468145)

TAMALIKA ENTERPRISE (BID ID -3467724)

RAJ TRANCON (BID ID -3468765)