Development Of Shree Ramnath Mahadev Temple, At. Petlad, Dist.Anand (2nd Attempt)

NAME OF WORK: DEVELOPMENT AND RESTORATION OF RAMNATH TEMPLE, PETLAD.

BILL OF QUANTITIES

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Demolition including stacking of serviceable materilas and

1 disposal of unserviceable materials with all lead and lift. (i) CMT 12.00 1,071.63

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other

4 attachment etc. complete and stacking them within all lead Each 55.00 190.19

and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes

5 with fittings and clamps including stacking the materials with Rmt 27.00 75.92

all lead and lift ( for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian

6 and European type, flushing tank etc. including stacking the Each 16.00 410.13

materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(i) G.I.sheet

Clearance of debris around the heritage building by excavatio

n upto depth 1.50mtr to 2.00 mtr carefully without damaging

the buried architectural parts of the building and collect all th

8 e intact parts at proper place for reuse at CMT 14.00 486.27

the time of restoration work as per direction of

Engineer incharge.

Add extra for sorting lifting & stacking charges for architectur

al parts up to 50m lead.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Removing of old sulphated lime wash/white or colour wash in

multiple applications without causing damage to the below

stone/brick/plastered surface. Scrubbing (not by scraping

which leaves surfaces scarred and scratched ) with bristle

brushes and hot water ( Care to be taken if the surface is

weak one it will break down). Hot water should be used if the

limewash has an oil or tallow binder. Gentle cleaning with air

abrasive tools can be used if the wall surface is not very

11 week.The final clean will almost invariably have to be carried SMT 2171.00 471.35

out by hand scrubbing and rinsed with clean water on

completion. Including scaffolding two legged mild steel

tubular scaffolding, of width 1200 to1500mm largely free

standing, using H frames or mild steel tubular pipes of

minimum 40 mm diameter and 6mm thick ply. The work

should be done under supervision of a trained conservator

Removal of rust,existing coatings, mill scale, dirt, oil, grease,

and other contaminants from steel.sections/stone surface

using Micro sand with the help of pressure pump.

Dismantling dressed stone work ashlar face stone work,

marble work or precast concrete work manually/ by

mechanical means including stacking of serviceable and

disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-charge :. It should be kept in

mind that the debris is not thrown from the height which can

cause damage to the building due to vibration. In lime mortar

Careful Demolition of M.S. Jali,Railing etc type of work

manually/ by mechanical means including stacking of steel

14 bars and disposal of unserviceable material within 100 SMT 216.00 93.80

metres lead as per direction of Engineer - incharge.

Dismantling Tiles work in floors and roof laid in cement

mortar including stacking materails within 50 m lead For

thickness of tiles above 25 mm and upto 40 mm.

Raking out joints of stone masonry surface to the required

width and depth, with due care and precaution, by

mechanical / manual means, including preparing and cleaning

the surface for re-pointing/ refilling of joints, including

disposal of rubbish to the dumping ground within 50 metre

Removal of stains, dirt, blackening and other contaminantsfro

mMarble by using the solution of Non Ionic soap diluts

17 with water.The soap solution should be mild and the SMT 1501.00 146.01

recommeded PH Value is

Repointing of raked out joints of Ashlar masonry by using lime

18 mortar 1:1:1 (1Lime:1coarse sand:1 Dolomite) SMT 2111.00 340.90

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Stone consolidation-removing the loose/damaged stone and

19 reconsolidating with new stone/reusable stone with lime CMT 45.00 5,706.70

mortar(1:3) wherever ncessary.

Providing and laying lime concrete with graded brick

aggregate 50 mm nominal size and 50% mortar comprising of

1 lime putty : 2 coarse sand rammed excluding cost of

centring and shuttering.

Mix lime mortar to the lime water which is to be applied with

natural additives like jaggery,soapnut,bhel fruit,etc depends

upon the region Wet the surface.Remove all the dust

21 particles. Apply lime plaster up to required thickness.Rework SMT 117.00 1,376.07

on the plaster to Lime plaster 1:1:1 (1 lime putty : 1 surkhi:

finesand) 12mm thick- single coat

Providing ,Designing & Fixing of New carved Sand stone

(dhrangadhra stone) in all thicknesses wherever required

upto all level/height in plain/ decorative work carved by

manual/machenical methode including base(dasa) ,shaft

,capital of columns , springer ,key stone of arches,

DecorativeLime stone band at plinth level. etc as per old

design including coldroll stainless steel clamp ,copper pins of

required diameter for securing adjacent stones in stone wall

22 lining tem includes cost of adhesive/ safety measure /use of CMT 41.00 68,736.98

specified equipment for workers required to complete the

work.(Overall length , width and thickness of stone (cut stone

/ replaced new stone quantity) will be measured for the

purpose of payment).For Heavy art Work & Figure &

Sculpture minimum Carved Stone Depth 10mm to 15mm

Dutchman Repair of stone sections that are severely

distressed, installation of new Sand stone pieces to match

existing stone as a fascia as mentioned in below items no.

23.1, 23.2, 23.3 and 23.4 as per Engineer - incharge.

23.1 Pain Work Area NOS 50.00 650.40

23.2 Cornice & Moulding Area NOS 50.00 1,706.10

23.3 Heavy Art Work NOS 50.00 2,409.90

23.4 Figure & Sculpture NOS 50.00 2,761.80

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and applying decorative on wall exteriorand interior

of Heritage surface texture Stone finish Texture Paint 1.5 to

2.0 mm th. Decorative acrylic texture surface of specified

brand and manufacture and of approved colour n design as

per details given by The rate also includes for all necessary

items required to complete the job as per design/drawing and

client/consultant's instructions. sub strata to get an average

finish coat thickness of 0.08 to 1.2 mm comprising of three

24 components viz. Dry Stone texture, bonding agent and top SMT 2312.60 1,489.00

coat of glossy finish (Dry Stone texture shall be made from

Dhanghdra and same material) homopolymer emulsion mix

etc,texture finish as per architect selection, complete as

directed by architect and EIC.,The rate also includes for all

necessary items required to complete the work as per

client/consultant's instructions

Providing /supplying & fixing of Helifix make Hi-Fin

reinforcement Bars-Helibar having 6mm Dia MOC. Austenitic

Stainless Ateel ASTM 304 having cross section area 8.3mm2

with UTS 1150n/mm2 at various places where there is cracks

in Stone Msonary /Arches .Item includes HELIFIX & HELIBOND

Grout a special cementitious grout with low expansion ,non-

gasing & injectables with exceptional thixotropic properties is

to be used to bond the stainless steel Hi-Fin reinforcement

bars & pins with the help of pressure gun to be injected in the

slot of stone Masonary .ensuring that it remains tight in the

joint after curing .Item also include Crackbond TE -250ml a

injectable special epoxy resin with the help of Crackbond

applicator ensuring that it covers entire cracked area

wherever required.

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(i) G.I.sheet

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B)Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1 Cement : 3-

Coarse sand : 6- Graded brick bat aggregate 40mm normal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying cement concrete work 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass concrete

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and laying cement concrete work 1:2:4 (1-Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

30 reinforcement for reinforced concrete work in (B) Slabs, CMT 230.00 4,101.23

landing, shelves, Balconis , Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

31 including bending, binding and placing in position complete Kg 17640.00 76.52

upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm.in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in G.L to Up to

two floor, level, in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional (upto 10 ton)

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

34 Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in SMT 118.00 623.60

foundation and plinth (B) Conventional

Providing 10 mm thick Cement Plaster in single coat on

brick/concrete wall/Ceiling for interior plastering up to floor

two level finishing with a floating coat of neat cement

slurry.(i) Cement mortar 1:3 (1-cement :3-sand) upto two

floors, etc. Complete, as per detailed and directed by EIC.

Providing 10 mm thick Cement Plaster in single coat on

brick/concrete for plastering on ceiling and soffits of stairs

above floor two level finishing with a floating coat of neat

cement slurry.(i) Cement mortar 1:3 (1-cement :3-sand) upto

two floors, etc. Complete, as per detailed and directed by EIC.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

37 upto floor two level and finished even and smooth in (i) SMT 1957.00 201.76

Cement mortar 1:3 (1-cement:3-sand)

Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

38 Cement : 4 coarse sand) in rough finishing and 8 mm thick top SMT 2029.00 281.14

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and laying fine dressed sand stone (Dholpur stone

and Bansipahadpur stone flooring Mix two Color Flooring 70-

30%) of any thickness for floor paving of approved size and

pattern over 3 to 4 inches (average) thick base of cement

39 mortar 1 : 6 ( 1 Cement : 6 Sand) with joints finished flush and SMT 980.00 3,754.17

pointed with mortar mixed with pigment of matching colour

:Fine dressed Sand Stone in Design combination given by

Providing and laying fine dressed sand stone of any

thickness for Wall Cladding of approved size and pattern over

3 to 4 inches (average) thick base of cement mortar 1 : 3 (

Cement : 3 Sand) with joints finished flush and pointed with

mortar mixed with pigment of matching colour :Fine dressed

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

41 material including dismentaling of existing flooring and SMT 1847.00 1,453.19

jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit

Granite Sill & Jambs

Providing and laying 18 mm thick polished granite stone

machine cut in single piece (Max. available) in tread,Riser, sill

and jambs of door/window frame laid over 10 mm thick

42 cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed SMT 40.00 2,804.00

with grey cement slurry with matching pigment incl. rubbing

and polishing rounding edge etc. complete colour and shed as

approved by architect engineer in charge

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of

approved size applying between the RCC and masonry

junction in proper line, level and plumb with all material,

labour, tools, tackles and equipment. Including providing and

fixing the jali with nails, etc complete as directed by the site-

Providing throating or plaster drip and moulding to R.C.C.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and laying sandwich platform comprising of

a) Sandwich of 18 mm thick single side polish Granite of

approved size, shade and sample on top and 25 mm thick

polished kota in bottom with 25 mm thick cement mortar

(1:4) in between

b) At centre vertical sandwich supports of 25 mm thick two

kota stone on sides and 25 mmCM (1:4) in between and at

both end walls vertical supports of 18 mm thick double side

c) 75 mm raised platform at bottom with kota on top and

50mmC M(1:4) at bottom, kota stone skirting as per design

and approved sample. The rate includes rounding

champhering and mirror polishing of edges , facias of granite

MS support including necessary bonding adhesive (if

required).Rate shall be also inclusive of curing , making holes

& cut outs for sink , washbasin, Pillertap / Bib tap but

excluding the cost of MS work, plumbing fixtures and sink . at

all floors all height etc complete as directed by Engineer In

charge. (Only plan area shall be measured & paid for ).Rate

shall be included all kota & granite mentioned in above.

Providing and fixing 35 mm thick shutters for Doors, windows

and clearstory windows including blackenamelled M.S. butt

hinges with necessary screws. (A) Indian teak wood. (i) Fully

Providing and fixing window having extruded aluminum olour

anodized section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

vertical member of size 61.85 mm x 31.75mm x 1.30 mm @

wt.of 0.659 Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 0mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

:2434, @ Wt. 0.643 Kg/mt) with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing and fixing M.S. grill of required pattern top wooden

frames of windows etc. with M.S.. flats at required spacing

and frame alround square or round headed bolts and nuts or

by screws.including applying a priming coat of red lead paint

and two coats of oil painting etc complete (A)Plain grill

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and fixing combination of Cast Iron & Wrought Iron

51 Gate including installation, locking arrangement, Painting etc. kg 1600.00 207.17

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type sections, in framed

work, including cutting, hoisting, fixing in position and

52 applying a priming coat of approved steel primer all complete kg 14122.60 130.52

as per the structural designs and directions of Engineer in

charge.Column ( 122 x 61 x 3.6mm )

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil,grease, dirt and other foreign matter and scoured

with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead.

Providing and fixing PUF Insulated continueous sandwich

panels for roofs of total thickness not less than 30 mm made

out from continue line method.Panel shall have 0.5 mm thick

pre coated GI sheet on both side of Polyurethane foam with

external face being corrugated in shape for GI and PU foam

both material.The crest height of the panel shall be of 35mm

minimum wiht 250mm c/c pitch. The Precoated sheet shall be

of minimum 240 mpa steel grade confirming to IS 14246:1995

and shall have zinc coating of 120 gsm as per IS:277 , 5-7

microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron.The PPGI Sheet shall have protective

guard film of minimum 25 microns to avoid scratches wihile

trasportation.The roof panels are laid over a frame work of

trusses, columns and purlins fixed using 90mm self drilling

bolt with rubber washer including all types of flashings. PU

Foam must be self-extinguishing, fire retardant type having

minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including

0.25mm craft paper edging,self tapping screws of required

length and nos.etc complete as per structural design and

direction of Engineer-in-charge.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

55 surface to give an even shade including throughly brushing SMT 1171.80 82.03

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give

56 an even shade including thoroughly brushing the surface free SMT 1439.80 40.19

from mortar dropping and other foreign matter and sand

papered smooth.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Wall painting (two coats), celing and sloping roof painting

with plastic emulsion paint of approved brand and

manufacture on undecorated wall and sloped roof ,ceiling

57 surface to give an even shade including throughly brushing SMT 673.00 89.84

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

58 after thoroughly brushing the surface to remove all dirt, and SMT 1846.00 119.07

remains of loose powdered materials.etc complete

Providing and fixing 18mm thick granite takati. as per

Architect detail drawing etc as directed by EIC.

Direction sign (Junction board):-Providing and fixing sing

boards made out of 2mm aluminium sheet; size 244 x

122cms. rectangle as as per the design of IRC-67-1977 pre

treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x 5mm

75x75x6mm as required; painted with best quality epoxy

coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of

engineer in charge.(B)High Intensity Grade

Providing wood work in Trusses, Purling, Rafter, Post,Post

61 Plates, wall plates and the like wrought framed, hoisted and Cu.dm 499.00 1,373.86

fixed in position

Providing and fixing wooden planks ceiling with tounged and

grooved jointing and wood screw(frame work and cover

62 fillings to be measured andlaid for separately) (A) Indian Teak SMT 110.00 5,224.28

wood (iii) 25mm thick (upto 10 ton)

Provding and fixing of new Stainless Steel mesh wire net as

per specific material compostion specification & traditional

design including all ornamental work ,curvature , welding,

grinding, buffing, polishing , coating and fitting the same with

necessary nuts and bolts complete, i/c fixing the railing with

necessary accessories & fasteners , bolts etc., of required size,

on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer - incharge.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Repairing of existing Zarokha as per old design intact

,including replacement of damaged member with masonry

work werever required and finish with lime kara as per

prescribed process a.Item includes cost of shuttering

64 /scaffolding /safety measure /use of specified equipment for Lumsum 1.00 5,05,172.98

workers of building required to complete the work .

minimum 10cmt stone may be used in 1 Zarokha, as per

instruction of EIA & Detail Drawing

Providing mirror polishing to floors and dado preparing the

surface, etc.,complete

66 Melamine polishing on wood work (one or more coat). SMT 250.00 983.16

Providing and erecting two legged mild steel tubular

scaffolding, of width 1200 to1500mm largely free standing,

using H frames or mild steel tubular pipes of minimum 40 mm

diameter,with base plates, fixed or adjustable with necessary

clamps, couplers, brackets for projections, joint pins,pullies

and other accessories, including steel angle or tubular pipe

bracings at adequate intervals, access platforms of metal or

timber planks of span not exceeding 2.5 Metre, including

provision of rubber inserts to pipe ends at points of contact

with structure to avoid damage, with intermediate

Traditional stone work in ashlar masonry construction

technology in lime mortar in proportion similar to the

existing traditional lime mortar (1 Lime: 1 Sand: 1 Khakha:

Surkhi aggregate) in exposed stone work including making

horizontal and vertical grooves 10 mm wide 12 mm deep

complete up to all floors for replacement of loose masonry,

missing, damaged and out of plumb masonry from the

historic structure. The recycled stones or bricks should match

stone or brick in the original masonry in terms of its colour,

texture and course. Dhangadhra sandstone shall be cleaned

and sufficiently wetted before laying to prevent absorption

of water from mortar. Every stone piece shall be carefully

fitted to the adjacent masonry so as to form neat and close

joints. The joints shall be staggered. Chips of stones may be

used wherever necessary to avoid thick mortar beds or joints

and hollow spaces. The course shall be truly horizontal and

the work strictly in plumb. The mortar shall be removed from

the stone faces after the work is completed. The joints should

be raked to provide for key to plaster. All stonework shall be

maintained wet for a minimum period of 10 days, All Stone

Work in Dholpur Stone.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Traditional stone work in ashlar masonry construction

technology in lime mortar in proportion similar to the

existing traditional lime mortar (1 Lime: 1 Sand: 1 Khakha:

Surkhi aggregate) in exposed stone work including making

horizontal and vertical grooves 10 mm wide 12 mm deep

complete up to all floors for replacement of loose masonry,

missing, damaged and out of plumb masonry from the

historic structure. The recycled stones or bricks should match

stone or brick in the original masonry in terms of its colour,

texture and course. Dhangadhra sandstone shall be cleaned

and sufficiently wetted before laying to prevent absorption

of water from mortar. Every stone piece shall be carefully

fitted to the adjacent masonry so as to form neat and close

joints. The joints shall be staggered. Chips of stones may be

used wherever necessary to avoid thick mortar beds or joints

and hollow spaces. The course shall be truly horizontal and

the work strictly in plumb. The mortar shall be removed from

the stone faces after the work is completed. The joints should

be raked to provide for key to plaster. All stonework shall be

maintained wet for a minimum period of 10 days (ornamental

Works) All Stone Work in Dholpur Stone.

Random rubble masonry with hard stones in foundation and

plinth including levelling with lime concete (1 lime:3surkhi:6

70 coarse sand) with 40mm stone aggregate upto plinth level CMT 14.00 6,224.01

with lime mortar 1:1:1(1Lime: 1Surkhi:1Coarse sand)

Providing and laying lime concrete with graded brick

aggregate 50 mm nominal size and 50% mortar comprising of

1 lime putty : 2 coarse sand rammed excluding cost of

centring and shuttering.

Providing ,Designing & Fixing of New carved Sand stone in all

thicknesses wherever required upto all level/height in

plain/ decorative work carved by manual/machenical

methode including base(dasa) ,shaft ,capital of columns

springer ,key stone of arches, DecorativeLime stone band at

plinth level. etc as per old design including coldroll stainless

steel clamp ,copper pins of required diameter for securing

adjacent stones in stone wall lining tem includes cost of

adhesive/ safety measure /use of specified equipment for

workers required to complete the work.(Overall length

width and thickness of stone (cut stone / replaced new stone

quantity) will be measured for the purpose of payment).For

Heavy art Work & Figure & Sculpture, All Stone Work in

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and fixing pre-cast Rubber Dye / steel Dyeinter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

75 wall with the help of clamp at every two metre C/C or shall Rmt 75.00 71.93

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

76 wall with the help of clamp at every two metre C/C or shall Rmt 23.00 90.93

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

77 wall with the help of clamp at every two metre C/C or shall Rmt 10.00 117.97

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

78 wall with the help of clamp at every two metre C/C or shall Rmt 5.00 146.65

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

79 wall with the help of clamp at every two metre C/C or shall Rmt 55.00 193.73

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing wsh down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with

a pair, of C.I. or Mild brackets, complete with fittings such as

lead valve less syphon, 15mm nom.nal size brass ball valve

with polythene float, C.P brass handle unions and couplings

for connections, with inlet, outlet and overflow pipes, 40mm

81 dia. porcelain enamelled flush bend including cutting holes in Each 9.00 2,346.92

walls and making good the same connecting the flush bend

with cistern and closet (overflow pipe to be measured and

paid for separately)(A) Vitreous China (I) In white colour

Providing and fixing plastic seat and cover for wash down

82 water closer with C.P. brass hinges and rubber buffers. (B) Each 9.00 288.45

Black plastic seal and cover.

83 Providing and fixing toilet paper holder.(A) C.P. Brass Each 9.00 423.75

Providing and fixing washbasin with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting

84 holes and making good the same but excluding fittings.(A) Each 9.00 1,511.53

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing M.I. fisher union for washbasin or sink.

Providing and fixing pillar tap, capstan head, screw down

87 high pressure with screws, shanks and back nuts. (i) 15mm Each 9.00 305.67

Providing and fixing chromium plated, bottle trap with

88 necessary couplings of approved quality for wash basin. Each 9.00 292.87

Providing and fixing Rubber plug for sink or wash basin.

Providing and fixing 600mm x 450mm bevelled edge mirrror

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and fixing C.P. brass towel rail comlete with C.P.

91 brass brackets fixed to wooden plugs with C.P. brass scews.(B) Each 7.00 610.32

600mm x 20mm size.

Providing and fixing screw down bib taps of following size.(A)

92 Brass screw down bib tap polished bright. (i) 15mm dia. Each 14.00 184.98

93 C.P. Angle stop cock 15 mm Heavy duty with cap Each 30.00 476.00

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware 550mm

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (ii) 50mm dia.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

97 wall with the help of clamp at every two metre C/C or shall Rmt 25.00 117.97

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

98 of PVC clamp of the size 110 mm diametre x 149 mm length x Rmt 71.00 868.22

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal diameter

99 of self cleansing design with C.I scread down or hinged grating Each 23.00 580.47

including the cost of cutting and making good the walls.

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends

prepared for collar joints including testing of joints

complete.(C) 250mm (upto 10 ton)

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

101 300mm x 300mm size (inside) with standard weight.(i) Square Each 6.00 1,234.57

mouth traps.(B) 150mm x 100mm size P or R type

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse

sand :4-stone aggregate 20mm nominal size) finished smooth

complete including curing and festing (i) Inside size 900mm x

1200mm and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not

less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type

depth 1.50 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every

103 additional depth of 0.1M. or Part thereof over item No.24.27 Each 0.84 517.78

(I) for depth from 0.9M to 1.5M.

Providing and fixing cast iron steps of size 500mm x 150mm x

104 22.5mm and painting with two coats of Anti-corrosive paint Each 28.00 205.60

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected

105 on PVC / Metallic box, single mounting base frame covered no 28.00 424.20

with textured/metallic front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

with medium class Rigid PVC pipe and accessories

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on

wall/ceiling, complete with earth continuity and necessary

connection with primary light with accessories erected on

Metal / PVC box covered with 3 mm thick PC(Polycarbonet) /

Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.

with medium class 25 MM DIA Rigid PVC pipe and accessories

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Primary light point controlled by one SP MCB ( Same as above

item but controlling with SP MCB )

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in following type of pipe

to be erected concealed in / flushed on wall/ceiling complete

with 6A Modular type switch and hum free EME four or more

step type electronic fan regulator with separately mounted

108 and accessories with earth continuity of following type no 17.00 606.00

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

Point wiring for Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic box, single mounting

109 base frame covered with textured / metallic front plate no 13.00 242.40

modules erected on / in wall / ceiling with following type

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of to be

erected concealed in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug erected on PVC /

Metallic box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of to be

erected concealed in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug erected on PVC /

Metallic box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Wiring for the 250 volts single phase and neutral

amps switched socket outlet with 4.0 sq.mm FRLS flexible

copper conductor 1100 volts grade wires of approved

make with concealed or surface mounted 25 mm dia

medium gauge PVC Conduit including providing and fixing of

16 amps 5 pin switch socket outlet of approved quality color

make & design in 2 mm thick GI box and earthing of

fixtures and the outlet box with 2.5 sq.mm PVC insulated

copper conductor stranded flexible "FRLS" wire.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI

mark (embossed) RIGID PVC PIPES of following size complete

erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following type of

erection.2) For erecting concealed in RCC / Brick wall/slab or

113 Open along with continuous fish wire to draw mains, laid in Mtr. 1200.00 32.32

approved manner with plastering by cement mortar &

finishing the surface to match the wall/ceiling.

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI

mark (embossed) RIGID PVC PIPES of following size complete

erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following type of

erection.2) For erecting concealed in RCC / Brick wall/slab or

114 open along with continuous fish wire to draw mains, laid in Mtr. 350.00 53.53

approved manner with plastering by cement mortar &

finishing the surface to match the wall/ceiling.

Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI

mark (embossed) RIGID PVC PIPES of following size complete

erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following type of

erection.2) For erecting concealed in RCC / Brick wall/slab

115 along with continuous fish wire to draw mains, laid in Mtr. 250.00 67.67

approved manner with plastering by cement mortar &

finishing the surface to match the wall/ceiling.

Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm

MAINS : ( not for Point wiring )

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel, relays, power

116 switchgears, motor starters & control wiring) with required mtr 50.00 434.30

size of copper lugs, nuts and bolts if required.

Supplying and Laying of 4 nos. of 10 sq mm Cu. FRLS flexible

wires with 2 nos 4 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size

Supplying and Laying of 4 nos. of 6 sq mm Cu. FRLS flexible

wires with 2 nos 2.5 sqmm Cu. FRLS flexible wires

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour

118 for earth continuity of following size mtr 50.00 146.45

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible

wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour

119 for earth continuity of following size mtr 50.00 111.10

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible

wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of

120 green colour for earth continuity of following size mtr 800.00 80.80

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible

wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires

Distribution Board

Supply, Assembling, grouting, leveling Connecting & testing

D.B of IP 43 of specified make.

Distribution Board-VTPN

121 Supply, Erecting, testing and commissioning of only VTPN D.B. no 1.00 13,099.70

PPI type with space for FPMCB as incoming and space for

DPELMCB and 8 TPMCB as outgoing per phase (i.e. 8 way

VTPN D.B.) of Legrand Make Cat. No.

Distribution Board-TPN

Supply, Erecting, testing and commissioning of only TPN D.B.

PPI type with space for FPMCB as incoming and space for

DPELMCB and 4 SPMCB as outgoing per phase (i.e. 8 way per

phase D.B.) of Hensel Make KV9236M

Distribution Board-SPN

Supply, Erecting, testing and commissioning of SPN D.B. PPI

123 type with space for DPELMCB as incoming and 8 SPMCB as no 2.00 3,977.38

outgoing per phase (i.e. 12 way D.B.) of Hensel Make

Miniature circuit breaker single pole 6A to 32A suitable to

operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

0.5 to 2 A SP MCB

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

126 40Amp SP MCB no 5.00 564.59

Providing & erecting 240 V MCB double pole switch for motor

& inductive load (C Curve) having 10 KA breaking capacity &

127 confirms to IS : 8828 in existing box having following capacity no 5.00 308.05

6 to 32 A DP MCB

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand

capacity of 6 KA and suitable for operation on single phase

240 V. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

25 to 32A / 100 mA DP ELMCB

131 SITC of 6 to 32 A TP MCB (10KA) no 4.00 1,117.06

132 SITC of 40 A TP MCB (10KA) no 2.00 1,644.28

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

133 confirms to IS :8828 in existing box having following capacity no 3.00 616.10

6 to 32A FP MCB

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only

Approved make four pole moulded case circuit breaker

having breaking Capacity ICU of 35KA. At 415 V, having

normal current rating up to 125A. With fixed thermal &

magnetic release suitable to work on A.C. supply 50 c/s. with

all iternal connections & complete erected in existing

G.M.S. housing.

ICS= 100% of ICU only.

Approved make four pole moulded case circuit breaker

having breaking Capacity ICU of 35KA. At 415 V, having

normal current rating up to 200A. With fixed thermal &

magnetic release suitable to work on A.C. supply 50 c/s. with

all iternal connections & complete erected in existing

G.M.S. housing.

ICS= 100% of ICU only.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed.t

25 Amp DP Dinrail Mounted Contactor Equivalent to Legrand

make Cat. No. 4125

SITC of 40 Amp DP Dinrail Mounted Contactor Legrand make

142 SITC of IP65 Polycarbonate enclosure for DP MCB no 5.00 1,380.67

143 SITC of IP65 Polycarbonate enclosure for FP MCB no 21.00 1,464.50

144 SITC of IP65 Polycarbonate enclosure for FP MCCB no 1.00 3,134.03

SITC Of 32A x 250 Volt single phase Power socket outlet point

145 having IP rating of IP:65 at convenient location with MCB.for no 2.00 6,331.69

SITC Of 32A x 415 Volt three phase Power socket outlet point

146 having IP rating of IP:65 at convenient location with MCB.for no 2.00 6,598.33

Making trench in soft soil of suitable width of 90 cms deep for

laying cable or locating the fault all over the run and

backfilling the same and making the surface proper. Providing

147 and erecting iron clad cable route marker duly marked with mt 10.00 54.54

ELE.CABLE of size 23 cms.X 12 cms. Flushed with ground in

cement foundation as directed by Engineer in charge. The

width shall be as per requirement

Covering of cable with second class bricks laid cover the cable

crosswise & also on both sides with covering of 7. 5 Cms.

layer of sand above & below cable (cable shall be laid in

148 0.9mtr.deep & 0.4 Mtr.wide trench). Where there are more rmt 10.00 157.56

than one cable in the trench on either side of the cable,

Cms. over lapping of bricks shall be provided.

Providing cement concrete.for foundation or for concrete

filling in 1:2:4 ratio with 20 to 25 mm stone metal duly

plastered with necessary curing for pole muffing or any other

Providing burnt brick masonry with 1:6 cement concrete duly

plastered including watering, stacking joint on exposed faces,

150 rocking at joints on exposed faces and watering complete Cu.mtr 2.00 4,494.50

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Construction of brick masonry pulling chamber 450 mm x

450 mm inside clear size and depth up to 0.6 meter with

mm thick masonry in cement mortar proportion 1:5,cement

finish cement plaster in CM proportion of 15 mm thickness

from inside with 150 mm thick PCC at bottom with top slab

minimum 200 mm thickness in M20 grade with

reinforcement. The rate shall be inclusive of providing and

fixing frame and 450 mm dia cover of FRC for the Heavy Duty.

Rate also inclusive of excavation and back filling & clearing

the site by removing debris & Shifting of the debris & making

site good As per the Instruction of the Engineer In charge

complete in all respect.

Construction of brick masonry pulling chamber 600 mm x

600 mm inside clear size and depth up to 0.60 meter with

mm thick masonry in cement mortar proportion 1:5,cement

finish cement plaster in CM proportion of 15 mm thickness

from inside with 150 mm thick PCC at bottom with top slab

minimum 200 mm thickness in M20 grade with

reinforcement. The rate shall be inclusive of providing and

fixing frame and 600 mm dia cover of FRC for the Heavy Duty.

Rate also inclusive of excavation and back filling & clearing

the site by removing debris & Shifting of the debris & making

site good As per the Instruction of the Engineer In charge

complete in all respect.

Construction of brick masonry pulling chamber 750 mm x

750 mm inside clear size and depth up to 0.75 meter with

mm thick masonry in cement mortar proportion 1:5,cement

finish cement plaster in CM proportion of 15 mm thickness

from inside with 150 mm thick PCC at bottom with top slab

minimum 200 mm thickness in M20 grade with

reinforcement. The rate shall be inclusive of providing and

fixing frame and 750 mm dia cover of FRC for the Heavy Duty.

Rate also inclusive of excavation and back filling & clearing

the site by removing debris & Shifting of the debris & making

site good As per the Instruction of the Engineer In charge

complete in all respect.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Supplying , fabricating and installation of various sizes MS

race way / junction boxes/clamps/hangers for Cable Tray,

Light Fixture made out of specified size sheet/Angle/Flat/rod/

channel etc as per design with all necessary accessories like

bend, junction boxes, coupler, Anchor fastener, Bolt Nuts,

etc.. & work from MS structure for other work with anchor

fastener of Hilti make and necessary hardware with necessary

welding has to be done to complete the job from ISA / ISMC /

PLATE. The job also includes to paint the structure with two

coats of red oxide and two coats color of enamel paint as

approved and recommended by consultant. Complete in all

respect to be installed at any height with all necessary

arrangements. Contractor has to complete the work up to

satisfaction of Consultant

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables

70 sq.mm x 3.5c Al. XLPE Arm. Cable

156 50 sq.mm x 3.5c Al. XLPE Arm. Cable mt 30.00 289.87

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

157 crossing or floor of following size of cables. mt 50.00 723.16

(C) 4 core 10 Sq. mm

158 6 sq.mm x 4 c Cu. XLPE Arm. Cable mt 75.00 544.39

159 6 sq.mm x 3 c Cu. XLPE Arm. Cable mt 200.00 422.18

Providing & erecting XLPE(IS:7098) (I)-88 ISI armoured cable

multistrand copper conductor for 1.1 KV. To be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size cable.

4 sq.mm x 3 c cu. XLPE Arm. Cable

Supplying & erecting XLPE (IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

3 core 2.5 Sq.mm.

SITC of 10 Core X 4sq.mm. Cu. multicore Unarmoured cable

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Cable Termination

SITC of Cable end termination of the following XLPE insulated

PVC sheathed aluminum/copper conductor armored cables of

1100 volt grade including supplying and fixing of bimetallic

Long neck crimping lugs, double compression type Brass

glands with earthing.

70 sq.mm x 3.5c Al. XLPE Arm. Cable

164 50 sq.mm x 3.5c Al. XLPE Arm. Cable no 2.00 156.55

165 10 sq.mm x 4 c Al. XLPE Arm. Cable no 4.00 88.88

166 6 sq.mm x 4 c Al. XLPE Arm. Cable no 38.00 60.60

167 6 sq.mm x 3 c Al. XLPE Arm. Cable no 6.00 55.55

168 4 sq.mm x 3 c Al. XLPE Arm. Cable no 20.00 55.55

Supplying & erecting XLPE (IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

3 core 2.5 Sq.mm.

MV Switchgear & Power Panels

Panel should be made in 2 Sections as oer substation layout,

The cost of connection between both the section of panel is

included in the price of this panel. Nothing extra shall be paid

Supply, Unloading at site, shifting to site, assembling, leveling,

grouting, erecting, Testing, & Commissioning main L.T. panel

board, fabricated from M.S. sheet & folded channel totally

enclosed cubical type compartmentalized. Scope Covers

Unloading at Site, Store in Weather Proof Condition, Shift to

the Location Basement / GF / FF, Grouting, Installation,

Testing & Commissioning complete in all respect & As per the

instruction of Architect / Consultant / Engineer Incharge.

Scope also covers Co ordination with Panel Manufacturer.

Design, fabrication, assembling, supply, installation , testing

of Panels for 415 V, 3 phase, 50 Hz, 4 wire power supply

Panels shall be fabricated out of 2 mm thick CRCA sheet steel

in cubical formation, compartmentalized in Form 4b

Construction, floor mounted, free standing and shall be dust

and vermin proof. 3 mm thick cable gland plate, shall be

provided both at the top and the bottom of the panel.

All large panels shall be provided with lifting hooks.

Distribution panels shall be fabricated in accordance with the

specifications.

Note : Panel vendor has to provide Surge Protection at every

stage of the Distribution.

1) Supporting rigid steel framework.

2) Cubicle type, 14 gauge CRCA sheet steel enclosed.

3) Complete with interconnections and distribution bus bars.

4) Proper bonding to earth.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

5) Painting/lettering on Breakers and distribution boards,

the location they serve, providing on each panel its circuit

6) Providing cable clamps / supports within distribution

boards cable alley.

7) TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s

with adequate size of neutral link.

8) All MCB’s shall be of minimum 10 KA breaking capacity.

9) The breaking capacity of MCCB’s are mentioned panel

10) All motor feeders MCCBs shall be of motor duty.

11) Distribution panels shall be Powder Coated with Siemens

gray paint shade no. RAL-7032 of IS-5.

12) Degree of protection for following type of distribution

panel enclosure shall be as per IS:13947-1993.

a) IP 52 for indoor panels.

b) IP 54 for kitchen and laundry panels.

c) IP 55 for outdoor panels.

13) All MCCB’s shall be provided with operating

mechanism for door interlock & with the roraty handle.

14) Current density of aluminium shall be 1 sq mm for

amps for rated current of bus bars and current density of

copper shall be 1 sq.mm for 1 amps for rated current of bus

15) Tinned copper earth bus as specified in the BOQ / SLD

shall be provided through out the length of each board.

16) All measuring instruments (Meters) shall be of digital

electronic with LED of approved make and compatible with

17) All hinged door shall be earthed through 2.5 sq mm

tinned braided copper wire.

18) All panels shall have provision of the following:

a) IP 55 for outdoor panels.

b) Pad locking of MCCB’s handles in “OFF” Position.

19) Additional set of C.T.s, potential free contacts,

connectors, contactors with wiring etc are to be provided for

BAS including space required for various transducers in Main

Switch Board sections. Only transducers shall be supplied by

BAS contractor.

20) All the C.T.s should be auto short link type.

21) All the MCCB's should be with rotary handle.

22) All MCB’s used for protection of resistive and lightly

inductive load shall be type “B” characteristic and inductive

(motor) load shall be of type “C” characteristic and discharge

lamps and UPS etc. shall be of type D characteristic.

23) All incoming and outgoing air circuit breakers shall be

placed on middle portion of the vertical in single tier

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

24) All PTs / control transformer shall be provided with centre

tap earth secondary.

25) If Any descripancy found in SLD & BOQ, it should be

brought in the notice of the Client / Consultant, Client /

Consultant's decision will be final in case of any descripancy.

26) G.A. Drawing should be checked & Finalised by consultant

before fabrication.

Incoming : From Supply Co. Meter

160 amps FP MCCB (16 KA) with following accessories: 1 Sets

i. LED type Phase indicating & ON, OFF light shall be protected

by 2 amps SP MCB's. - 5 nos.

ii. 3 Nos. of Digital type 0-160 / 5 amps CTR digital ammeter

with 3 nos 160 / 5 amps, 15 VA Class I CT’s.

iii. Digital type 0-500 Volt digital voltmeter with inbuilt

selector switch & shall be protected by 2 amp TP MCB’s -

iv) Load Manager of Schneider make PM 5110 with RS

connectivity with 3 nos. of Class 1, 160 / 5 Amp. CT of 15 VA

Incoming : From D.G.

160 amps FP MCCB (16 KA) with following accessories: 1 Sets

i. LED type Phase indicating & ON, OFF light shall be protected

by 2 amps SP MCB's. - 5 nos.

ii. 3 Nos. of Digital type 0-160 / 5 amps CTR digital ammeter

with 3 nos 160 / 5 amps, 15 VA Class I CT’s.

iii. Digital type 0-500 Volt digital voltmeter with inbuilt

selector switch & shall be protected by 2 amp TP MCB’s -

iv) Load Manager of Schneider make PM 5110 with RS

connectivity with 3 nos. of Class 1, 160 / 5 Amp. CT of 15 VA

160 amps FP Tinned copper bus bars with colored heat

shrinkable insulated sleeve.

63 amps 4 pole MCB ( 10 KA ) : 9 Nos.

40 amps 4 pole MCB ( 10 KA ) : 10 Nos.

6-32 amps 4 pole MCB ( 10 KA ) : 17 Nos.

6-32 amps 2 pole MCB ( 10 KA ) : 4 Nos.

32 amps 4 pole Contactor : 8 Nos.

Astronomical Digital Time Switch : 4 Nos.

Panel should be as per SLD & Specifications

SITC of 6W LED Uplighter for Pillar's of 3000K, with inbuilt led

driver, IP65, IK08, and all kind of accessories Of Cat. No.

GRAZIA-PIGMY 6W

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

SITC of 20W LED Uplighter for Ghumbaj of 3000K, with inbuilt

172 led driver, IP65, IK08, and all kind of accessories Of Cat. No. no 70.00 3,605.70

AERO FLOOD QUBIK20W3K

SITC of 7W LED Uplighter for Jali of 3000K, with inbuilt led

173 driver, IP65, IK08, and all kind of accessories Of Cat. No. no 20.00 4,767.20

LENEA-LED 7W 3K

174 SITC of LED Driver DRIVER 200W IP67 no 147.00 5,928.70

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110

175 LED driver efficiency > 85 % no 4.00 254.52

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux

make LED used for luminaire. ( fitting required LM-79 & LM-

80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(a) 5-9 Watts, Surge-2 KV, IP-20,2 feet, Cat-lll

(d) 22-24 Watts, Surge - 2KV,IP-20,

Supplying & erecting approved make low noise decorative

177 exhaust fan having size 200mm with 1350 RPM with square no 7.00 2,009.90

frame ABS body with inbuilt lowers & square frame.

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size

and maximum speed in RPM

[A] 305 mm dia 900 RPM

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having

179 3blades with aluminium blades with , canopy & 30 cms. down no 14.00 2,090.70

rod erected with 24/ 0.2, 3 core flexible wire with

earthing.(Make shall be approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with necessary 24/ O.20, 3 core flexible wire with

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Supplying & erecting funnel type earthing having earth plate

of following size burred in specifically prepared earth pit

mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with

Funnel with a wire mesh for watering & bricks masonry block,

C.I. Cover complete as per para 7.3 of IS 3043 with necessary

length of double Galvanised Iron / copper earth wire No

SWG bolted with lug to the plate and covered in 12 mm dia.

G.I. pipe 2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction & duly tested by

earth tester confirming to IS (As per drawing) with following

with 60 x 60x 0.315 cms. Copper earth Plate

Supplying & erecting in earthpit of minimum bore dia. 225mm

size ASH or approved make Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia

of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications.

For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Earth wire/strips :

Supply and laying cu. earthing strips for interconnecting the

earthing stations, panels, DB's etc. in built up trenches, on

walls/ceiling, buried in ground generally as specified and

shown on drawings complete with : fixing accessories

183 Corrosion protection of buried conductors with bituminous kg 350.00 90.90

coating and covered with PVC tapes.

Providing and erecting HOT deep Galvanised iron strip / wire

Supply and laying cu. earthing strips for interconnecting the

earthing stations, panels, DB's etc. in built up trenches, on

walls/ceiling, buried in ground generally as specified and

shown on drawings complete with : fixing accessories

Corrosion protection of buried conductors with bituminous

coating and covered with PVC tapes and with all type of

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel, relays, power

185 switchgears, motor starters & control wiring) with required mtr 15.00 55.55

size of copper lugs, nuts and bolts if required.

Supplying and Laying mains with 1 no. of 6 sq mm Cu. PVC

insulated FRLS flexible wire ( Green Color Only )

SITC of Water Tight Junction Box of Hensel make Cat. No.

KG9003IN With necessary clamp for mounting of the J.B. ( All

the cable / wire connections to the JB shall be with the Water

tight Glands only )

Supplying & erecting carbon dioxide (CO2) fire extinguisher

user of following capacity with necessary clamps made from

50 x 6 mm M.S. Flat with nut & bolts grouted in wall

For 4.5 Kg Capacity

Supplying rubber matting of following thickness as per IS

Providing and erecting metallic vitrified danger notice board

189 for MEDIUM VOLTAGE installation to be erected as per IS. no 10.00 80.80

Providing printed instruction chart both in English and

190 Gujarati and duly framed with front glasses, for treatment of no 1.00 151.50

person suffering from Electric shock

Providing the A0 Color size print of the Final Plan / SLD duly

191 framed out on Glass for Electrical room & BMS Room no 5.00 959.50

Providing the A1 Color size print of the Final Plan / SLD duly

192 framed out on Glass for Electrical room & BMS Room no 5.00 787.80

Providing the A2 Color size print of the Final Plan / SLD duly

193 framed out on Glass for Electrical room & BMS Room no 5.00 686.80

Providing the A3 Color size print of the Final Plan / SLD duly

194 framed out on Glass for Electrical room & BMS Room no 5.00 474.70

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to make

ground as per original.

I/We am/are willing to carry out the work at… % above/below percent (Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under.

Sr. No. Description of item Unit Quantity RATE Total Amount

Sr. No. Description of item Unit Quantity RATE Total Amount

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all