Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-AOC ERINJIL HOUSE PERAKAM | KERALA | L1 | Accepted-AOC COUNCIL ACCEPTED | |
| 2 | L2₹1.7 L+₹5,215.62 (3.19%)Rejected-Finance PAVARATTY GRAMAPANCHAYAT | PAVARATTY | THRISSUR | KERALA | 680577 | L2 | Rejected-Finance COUNCIL REJECTED |
| Sl No | Description | Qty | Unit | VIBINDAS.E.M L2 | MOHANAN L1 |
|---|---|---|---|---|---|
| 1.00MAINTENANCE | |||||
| 1.00 | 14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand) | 1.17 | sqm | 610 ₹713.7 | 599 ₹700.83 Lowest |
| 1.00 | 15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below | 1 | each | 148 ₹148 Lowest | 148 ₹148 Lowest |
| 1.00 | 13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 312.21 | sqm | 27 ₹8,429.72 | 26 ₹8,117.51 Lowest |
| 1.00 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 326.04 | sqm | 180 ₹58,686.48 | 165 ₹53,795.94 Lowest |
| 1.00 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 40.8 | sqm | 240 ₹9,792 Lowest | 240 ₹9,792 Lowest |
| 1.01 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 16.31 | sqm | 108 ₹1,761.26 Lowest | 108 ₹1,761.26 Lowest |
| 1.01 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 0.38 | cum | 7,279 ₹2,751.46 Lowest | 7,279 ₹2,751.46 Lowest |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 3.78 | sqm | 369 ₹1,394.82 Lowest | 369 ₹1,394.82 Lowest |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.85 | cum | 9,230 ₹7,863.96 Lowest | 9,230 ₹7,863.96 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,166
Closing Date
29 Jan 2026, 2:00 pmClosed
ASSISTANT ENGINEER
OFFICE OF ASSISTANT EXECUTIVE ENGINEER GURUVAYUR MUNICIPALITY
Annual Plan PRO NO 516/2024 MAINTENANCE OF HOMEO DISPENSARY (GURUVAYUR ) GURUVAYUR MUNICIPALITY General Civil Work
2026_LSGD_829265_1
Etdr-2/2026
Open Tender
Civil Works - Roads
Item Rate
240 days
GURUVAYUR
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
₹4,166
27 Apr 2026
21 Jan 2026
30 Jan 2026
21 Jan 2026
29 Jan 2026
21 Jan 2026
MAINTENANCE
14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)
15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below
13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
OD319231/2025-2026:Providing and fixing U.V sheet in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):UV sheet of 3.00 mm thickness
OD319227/2025-2026:Providing and fixing aluminium square shape handle ( length 30 cm) of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium
OD302432/2025-2026:Carpenter (average)
OD320484/2025-2026:Engaging Electrician for Electrician works
OD302434/2025-2026:Engaging Man Coolie
OD320520/2025-2026:Welder
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1392491.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.61 MB
BOQ_1392491.xls
BOQ • 0.31 MB
SBD.pdf
Tender Documents • 1.73 MB
PRELIAGREE.pdf
Tender Documents • 0.26 MB
AFFIDAVIT.pdf
Tender Documents • 0.24 MB
FOT.pdf
Tender Documents • 0.25 MB
EPAYMENT.pdf
Tender Documents • 0.23 MB
INTEGRITY.pdf
Tender Documents • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .