Road Repairing of Bisalpur Dy Service Road from Km 30.700 to 33.650 (Railway Crossing Bridge to Puranpur- Pilibhit Road) in Sharda Sagar Division, Pilibhit

Amount

Clearing jungle including uprooting of vegetation grass, bush, wood, trees and sapling of girth upto 30 cm measured at distance is 1m from ground level & removal of rubbish upto a distance of 50m outside the periphery of area.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 4.7-405(3)

Applying tack coat with Bitumen (VG-10) using emulsion distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 5.2-503(iii)

Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per Technical Specification Clause 5.9-508.

Laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 5.12-510.

Providing and Fixing of typical Irrigation canal informatory sign board size (0.60x0.90) on MS plate of 1.60 mm thickness duly welded with MS flat iron 35mmX 5mm size on bock on edges. With MS angle iron frome of 35X35X5 mm enbedded in cement concrete M-15 grade block of 300X300X600 mm below ground level. lettering and printing logo etc. will be painted with ready mixed synthetic enamel paint of approved qualitiy in required shade and colour all skeltons of framed post and plate will be painted with primer and two coats expoxypaint including supply of material labour T&P etc required for proper completion of work.

Videography/Photography of silt clearance works in canal and drains before, during and after silt clearance by DRONE as per requirement including supply of Videography/Photography in Pen Drive and vehicles for movement as per direction of Engineer in charge.