Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹37.8 L+₹9.5 L (33.6%)Rejected-AOC | L2 | Rejected-AOC Rejected being not L1 | |
| 3 | L3₹38.2 L+₹10.0 L (35.3%)Rejected-AOC 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L3 | Rejected-AOC Rejected being not L1 |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
1 Feb 2023, 6:00 pmClosed
GE (MES) Roorkee
GE MES Roorkee 247667
REPAIR POLISHING AND PAINTING INCLUDING DAY TO DAY MAINT OF WOODEN FURNITURE IN MD OTM ACCN IN AOR OF GE ROORKEE
2022_MES_571386_1
8392/225/E8
Open Tender
Civil Works
Item Rate
270 days
Roorkee
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Roorkee
₹85,000
Yes
19 Jun 2023
28 Dec 2022
6 Feb 2023
28 Dec 2022
1 Feb 2023
18 Jan 2023
Amount
Chair Dining JCO / OR MAP Wooden FD/MAP-II / 05 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/back/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Back horizontal rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC moulded seat
Stiffener set of three at legs made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC ring
Chair Dining FD- 279/ similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Upper/lower stiffener set of three of back support made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffner set of three of Leg bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Canning of seat with approved quality of PVC cane
PVC shoe
Chair dining officer MAP Wooden FD/MAP-II / 04 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Seat with ply and Rexene instead of tapestry
Front/back/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Back vertical rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Back horiozontal top rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffner complete at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC ring
Chair Easy FD- 229 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front left/right Leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Left/right arm rest made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Top/bottom/left/right rail of back frame
Canning of seat with approved quality of PVC cane
Canning of backet with approved quality of PVC cane
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Chair writing ( FD- 280 ) /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Upper/lower stiffener of back support made of Ist class hard wood (teak wood) of size as shown on drawing.
Left/right arm rest made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear//left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Canning of seat with approved quality of PVC cane
PVC shoe
Bed plytop wooden Drg No - FD/MAP/01 and similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Stiffener made of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Head rest without rexene & leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Rexene best quality for each head rest
Foot rest without leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Head leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Foot leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Top ply for sleeping made of 12mm thick plywood BWR grade of aproved quality of size as shown on drawing
Bed plytop wooden Drg No - FD-246 and similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Stiffener made of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Head rest without leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Foot rest without leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Head leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Foot leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Top ply for sleeping made of 12mm thick plywood BWR grade of aproved quality of size as shown on drawing
TRESTLE STORE ROOM WDN FD 86(M): Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Taking out old U/S leg from Trestle store room (wooden) and S&F new wooden leg of secton size 100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and all as specified and directed.
Taking out old unserviceable long rail from trestle store room and S&F new long rail of section size 2440x100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and all as specified and directed.
Taking out old unserviceable short rail from trestle store room and S&F new short rail of section size 600x100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and all as specified and directed.
Taking out old unserviceable long middle rail from trestle store room and S&F new long middle rail of section size 2040x100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and directed by Engineer in charge.
Table wooden 3' x 2' with Drawer FD-283/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg without PVC shoemade of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Drawer made out of 12mm thick BWR grade commercial plywood with front side made out of 12mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 3mm thick Ist class hard wood beading on top edges.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Table Computer FD/E6/MAP/03 or Any type
Top 18 mm thick of table computer made of Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
ScrewingWelding wherever required as directed by E-in-Incharge
Drawer made of 18 mm thick pre laminated Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with telescopic channel of make: Hettich/Ebco/Link. Rest all as per drg.
Shelves made of 18 mm thick pre laminated Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex with telescopic channel of make: Hettich/Ebco/Link. Rest all as per drg.
Table computer framing made out of 25 mm sq pipe 18G as per drg.
Rectangular PVC cover made to shape with nylon buffer std quality as per drg
Table center wooden frame FD-274, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing. without PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Table wooden 3' x 2' without Drawer FD-284/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.
Hard Top with 18/19mm thick Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing. without PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Table wooden 2’x2’ without Drawer FD-293 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener set of leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing without PVC ring
Front/back/left/right rail of top sheet made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Table Dining 06 persons wooden FD- 273 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 6mm thick Ist class hard wood beading on all exposed edges.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing. without PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffener at top made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Table Dining 08 persons wooden FD-273/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick Pre laminated MDF of Grade-I Exterior quality with decorative lamination on one side and other side with balancing white as per IS : 14587 with 6mm thick Ist class hard wood beading on all exposed edges.
Leg without made of Ist class hard wood (teak wood) of size as shown on drawing. PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
Sofa MAP Wooden FD/MAP-II / 02 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Leg front made of Ist class hard wood (teak wood) of size as shown on drawing.
Vertical rail/Leg of back made of Ist class hard wood (teak wood) of size as shown on drawing.
Side rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Arm rest of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Bearers / stiffener of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Back ply made of 12mm thick BWR grade for single seater
Seat ply made of 12mm thick BWR grade for single seater
Front rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Rear rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Top/bottom rail of back made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Removing of existing unserviceable cushion from sofa sets (MAP) 3/1 seater and S&F new cushion for seat & back of size 21"x22" x100mm thick made of 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside of superior quality (Rate not less than Rs. 500/- Per mtr) width not less than 4 feet complete all as specified and directed by Engineer-in-Charge.
Sofa wooden FD-281/ similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Battens of back made of Ist class hard wood (teak wood) of size as shown on drawing.
Battens of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Vertical rail of back made of Ist class hard wood (teak wood) of size as shown on drawing.
Side rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Arm rest of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Front rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Top/bottom rail of back made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Bearers of back made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Bearers of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Removing of existing unserviceable cushion from sofa sets 3/1 seater and S&F new cushion for seat & back of size 21"x22" x100mm thick made of 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside of superior quality (Rate not less than Rs. 500/- Per mtr) width not less than 4 feet complete all as specified and directed by Engineer-in-Charge.
Table Bed Side FD-276/248
6 mm thick back ply BWP grade shall be used as per shape and size shown in drg.
b) Top/bottom/Shelf made out of 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg.
Sides made out of 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg.
PVC shoe as per sample.
Bin soiled multipurpose FD/E6/MAP/09
Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Greenply/ Archidply/ Century ply) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg.
Cabinet door made out of 18 mm thick BWP grade plywood (Make: Greenply/Archidply/ Century ply) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) be provided in Cabinet all as directed by GE/EIC and as per drg.
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg.
Fancy Knob CP as per sample held in yard.
M&L for Repairing and melamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz FD/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. Note : Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE Roorkee including BSO's Furniture Yard as directed by Engineer-in-Charge.
Almirah wooden Large 1/2 H x1/2S
Chair dining JCO / OR MAP Wooden FD/MAP-II / 05
Chair Dining FD- 279/ similar pattern.
Chair dining officer MAP Wooden FD/MAP-II / 04 /similar pattern
Chair Easy FD- 229 /similar pattern
Chair writing ( FD- 280 ) /similar pattern
Chair WBB w/o arm FD- 225 /similar pattern.
Bed plytop wooden Drg No - FD/MAP/01
Bed plytop wooden Drg No - FD-246
TRESTLE STORE ROOM WDN FD 86(M)
Table wooden 3' x 2' with Drawer/without drawer FD-283/284
Table Computer FD/E6/MAP/03 or Any type
Teapoy wooden FD-278 similar pattern.
Table center wooden frame FD- FD-274.
Table Dining 06 persons wooden FD- 273/Map pattern.
Table Dining 08 persons wooden FD-273/Map pattern.
Sofa MAP Wooden FD/MAP-II / 02 3 seater.
Sofa MAP Wooden FD/MAP-II / 02 single seater
Sofa wooden FD-281/ similar pattern 3 seater
Sofa wooden FD-281/ similar pattern single seater
Table one piece AP
Bin soiled multipurpose FD/E6/MAP/09
Table Bed Side FD-276/248
M/S CHANDER SHEKHAR
JAISWAL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .