Repair Renovation works for office Building including interior works and services at trade world, 3rd floor, Lower Parel, Mumbai

S. No. Description of item DSR Item Item Total Amount

Sub Head Description of item DSR Rate Market Rate

A TELEPHONE SYSTEM 1,77,089.00

B LAN NET-WORKING SYSTEM 75,069.00

TOTAL COST 2,52,158.00

Digitally signed by

LV Sum CHANDRESH KUMAR 1

Renovation/ Refurbishment of Office buildings located in IFCI Mumbai

Preliminary Cost Estimate

ABSTRACT OF COST

S. NO Description of Item Unit Qty DSR rate NDSR Rate DSR Amount NDSR Amount

SH-5 REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair

cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing

and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

5.22A and binding all complete Above plinth level.

3.0 5.22A Thermo-Mechanically Treated bars. Kg 266.56 104.94 27,972.29

Total Carried over to Summary 54,760.67

SH-6 MASONRY WORK :-

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS

:12894, in super structure above plinth and upto floor V level

4.0 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.03 1093.46 10,969.56

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm

thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in

super structure above plinth level up to floor V level with RCC band at sill level and lintel level with

approved block laying polymer modified adhesive mortar all complete as per direction of

Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for

seperately). cum 6.52 8108.64 52,874.83

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick

with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super

6.0 6.38 structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand).

The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third

course of masonry work. cum 17.94 9920.17 1,77,992.83

TOTAL MASONRY WORK 2,41,837.22

SH-8 MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,

machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4

8.2 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy

touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc.

completeat all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

8.3 machine polishing to edge to give high gloss finish etc.complete as per design approved by

Engineer-in-Charge. -

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 8.98 553.20 4,965.52

Extra for providing opening of required size & shape for wash basins / kitchens sink in kitchen

11.0 8.5 platform, vanity counters and similar location in marble / Granite /stone work including necessary Each

holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing & fixing urinal partition of size 900X450X350mm. Made up of 12mm thick compact

12.0 NDSR laminate with standard stainless steel accessories etc. complete as per the direction of Engineer-

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed below:

TOTAL MARBLE & GRANITE WORK 1,19,173.77 12,918.99

SH-9 WOOD & PVC WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames,

9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia &

length ( hold fast lugs or dash fastener shall be paid for separately).

13.0 9.1.1 Second class teak wood Cum 0.13 139090.06 18,435.41

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st class hard wood and well matched

teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.2 shutters. -

14.0 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 13.17 3380.06 44,505.20

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron screws,

plugs and priming coat on unexposed surface etc. complete.

2nd Class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter

bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1

9.53 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Each 42.00 222.67 9,352.18

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with

9.165 necessary screws etc all complete -

M.R Providing and fixing SS tower bolts, ISI marked, with necessary screws etc. complete :

Providing and fixing Cylinder Lock - Solid Stainless-Brass Pin -17L x 7.5W Centimeters Ideal for

20.00 Bedroom and Entrance Doors each 7.00 1595.82 11,170.73

21.00 Providing and fixing hanging floor door stopper ISI marked, with necessary screws etc. complete. each 4.00 57.93 231.73

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60

mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not

less than 120gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The

frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm .

The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical style & 4 on

horizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made

template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter .

The frame shall be finished with a approved fire resistant primer or powder coating of not

less than 30 micron in desired shade as per the directions of Engineer - in- Charge . (Cost of SS

ball bearing hinges is excluded). Mtr 17.10 2143.42 36,652.51

Digitally signed by

Abstract CHANDRESH KUMAR 1

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating

conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory

approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical

23.00 9.162 styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of

1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation

having density minimum 96 kg/cum and fixing with necessary stainless steel ball

bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved

fire resistant primer or powder coating not less than 30 micron etc all complete as per direction

of Engineer-in-Charge (panelling to be paid for seperately). Sqm 6.48 11693.42 75,773.34

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I.

beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20

x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm

c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30

micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as

24.00 9.164 per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in- Charge with glass of

required thickness having 120 minutes of fire resistance both integrity & radiation control

(EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the stamp showing the value of E, EW

& EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation

body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC

17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock

25.00 9.139 on back side of the Panic Latch of reputed brand and manufacture to be approved by the

Engineer- in- charge, all complete. Each 3.00 8140.26 24,420.79

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer

(having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg

and door width from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete. Each 4.00 956.60 3,826.42

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50

mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by

27.00 9.105 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to

centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs,

floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed

to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of

two boards, fixed to the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and

two coats of primer suitable for board as per manufacture’s specification and direction of

engineer in charge all complete. -

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

28.00 9.105.1 Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

Providing and fixing Toilet cubical(of following standard dimension which includes 600mm door

size width) made up of thermosetting resign treated high pressure ,self supporting decorative

compact laminates with permanently incorporate anti-bacterial agents(under JIS Z2801:2000

certification) during manufacturing .Compact board should be resistance to water immersion

29.00 NDSR through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3

and fulfilled the criteria of green guard gold certification and manufactured under EN438-

2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant,

termite resistant ,Scratch resistant ,Weather and climatic shock resistant.

TOTAL WOOD & PVC WORK 8,39,345.85 1,66,966.57

SH-11 FLOORING WORK

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished

11.3 with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of

steps etc. complete.

30.0 11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 56.97 597.62 34,043.45

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with 18

11.56 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge. -

31.0 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 31.76 4360.30 1,38,469.72

Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement

marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in

11.15 proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips

of sizes from 1 mm to 4 mm nominal size by volume), with under layer 25 mm thick cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size),

including rubbing, polishing and cement slurry etc. complete : -

32.0 11.15.1 18 mm thick crazy marble stone white, black or as specified Sqm 60.18 1668.50 1,00,409.35

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness

to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,

in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement

Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

pointing the joints with white cement and matching pigments etc., complete. Sqm 84.52 1400.54 1,18,379.34

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints

with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

11.41A required thickness, leveling system and rubber mallet for placing the tiles gently and easily -

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

11.46 joint with white cement & matching pigments etc. complete. -

Digitally signed by

Abstract CHANDRESH KUMAR 2

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy grout mix of 0.70

kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),

11.48 including filling /grouting and finishing complete as per direction of Engineer-in-charge. -

Providing Nylon Carpet Tiles having density 5300 gm / m2 , Carpet tile Printed Nylon type-6

construction face carpet tile with fiber glass polyvinyl chloride backing. The rate shall be inclusive

for Comfolene, GermiShield, Markproof, ActiBack, Stainarmour, Nurturefeet, Microbefresh,

moist proof and the likes with a total thickness of 4 mm or as manufacturer’s specification.

37.0 NDSR Carpet tiles shall be complied with Flammability Test ASTM E648 , Methenamine Pill Test ASTM

D2859, Smoke Density Test ASTM E662, Appearance Retention Hexapod test ASTM D5252.

The laying work should be carried out by the authorized installer of the Company in India, all

complete as per direction of the Engineer in-charge.

TOTAL FLOORING WORK 9,46,398.54 93,457.61

SH-12 ROOFING WORK

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized

@ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints

to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced

at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of

1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm

thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved

texture in the grid including, required cutting/making, opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-

sections shall be pre-painted with polyester paint, all complete for all heights as per

specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and

0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction

Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending and perforation, and backed with a black

Glass fiber acoustical fleece. Sqm 42.13 2012.89 84,803.83

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of

Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated

with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized

polyester on the back side with all edges sealed with the face side PVC film which goes around

and wraps the edges and is bonded to the edges and the back side metalized polyester film so

as to make the tile a completely sealed unit. Sqm 382.31 2155.34 8,24,014.15

TOTAL ROOFING WORK 9,08,817.99 -

SH-13 FINISHING WORK

13.4 12 mm cement plaster of mix :

13.16.1 6mm cement Ceilling plaster of mix :- -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand

42.0 13.80 and manufacturer, over the plastered wall surface to prepare the surface even and smooth

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre of approved brand and manufacture, including

applying additional coats wherever required to achieve even shade and colour.

Providing and applying textured Paint on wall of two or more coats of approved make & shade

filling the dents with approved Acrylic putty gypsum / or approved crack filler, binder, cleaning

and making the surface dust free, preparing surfaces, applying a coat of sealer or primer as per

44.0 M.R the manufacturers specifications, applying two under coats and one finished coat of paint to

achieve the required finish including scrapping, scaffolding, cleaning etc. complete as per detail

drawing, as specified and as directed by Engineer-in-charge.

TOTAL FINISHING WORK 4,21,214.22 4,10,120.99

SH-21 ALUMINIUM & GLASS WORK

Providing and Fixing Glass Partition with12 MM thick Toughned Glass of approved make and all

45.0 NDSR Accessories including fixing on floor & wall as per the direction of Engineer-In-Charge

Providing & fixing partly Glazed partly panelled / full height partitions comprising of the following:

Aluminium vertical members out of 50mm x 50mm size rigidly fixed at 600mm centre to centre

upto 900mm height from floor level upto 2100mm level except in glass subject to sizes of glass

as per site condition and rigidly fixed. Aluminium member to be minimum 1.2mm thick (16

Aluminium horizontal members out of 50mm x 50mm size rigidly fixed at 600mm centre to centre

upto 900mm height from floor level upto 2130mm upto false ceiling level and at underside of

beam/slab levels as per site conditions except in glass portion and rigidly fixed to vertical

members. Aluminium member to be minimum 1.2mm thick (16 gauge). Partition qty will be

reckoned only till false ceiling height when considering for measurements

6mm plain BWR ply panels fixed on both sides on the above framework as per directions with

c) groove & removable type panels at skirting and 750mm levels for electrical / computer junction

d) 1mm thick laminate sheets fixed on visible surfaces at both sides as per directions.

6 mm thick clear toughened glass panels with Film as per design fixed with all round wooden

46.0 e) beadings out of 25-38mm x 19mm beading as per design (size of the glass panels will be subject

to site conditions) Sqm 22.10 4,695.57 1,03,776.50

Providing & Fixing premium quality Manually operated Roller blinds with Solar protection fabric of

high tenacity Polyester Yarn with PVC Coating & Grey Backing, & offer 100% blackout / heat

radiance. Fabric shall have Indoor Air Quality & Children & School Certified. Weight: 300 to 350

g/m2 (+/-5%), Thickness: 0.47 to 0.55 mm (+/-5%), Fabric Openness Factor: 0%, Tensile

Strength (Warp/Weft): 160/170 daN / 5cm, Tearing Strength (Warp/Weft): 11/13 daN, Solar

Transmission- 0%, Solar Reflectance 25-69%, Solar Absorption 28-31%, Fungistatic Treatment:

Degree 0, Excellent (EN ISO 846-A).

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor

48.0 21.18 spring type fixing arrangement and making necessary holes etc. for fixing required door fittings,

all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid

Providing & fixing set of Stainless Steel door handle of 25mm dia 600mm length, including all

NDSR accessories Complete Each 12.00 3399.90 40,798.75

Providing & fixing set of Stainless Steel Glass door Lock Size 7.6x5.1x3.8 cm round type with

49.1 NDSR Authenticity Card Glass to Glass Door Lock (Set of 1) including all accessories

TOTAL ALUMINIUM WORK 1,51,401.55 3,08,299.86

Digitally signed by

Abstract CHANDRESH KUMAR 3

DISMANTLING DEMOLISHING & REPAIRS

Demolishing brick work manually/ by mechanical means including stacking of serviceable

50.0 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking

within 50 metres lead : -

51.0 15.13.2 Of area beyond 3 sq. metres each 10.00 183.80 1,838.00

Dismantling steel work manually/ by mechanical means in built up sections without dismembering

52.0 15.19 and stacking within 50 metres lead as per direction of Engineer-in-charge

Demolishing cement concrete manually/ by mechanical means including disposal of material

15.2 within 50 metres lead as per direction of Engineer - in - charge -

15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) Cum 20.00 2368.53 47,370.51

15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) Cum 17.00 1463.00 24,871.05

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within

50 metres lead. -

53.0 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 538.06 71.42 38,427.61

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling

54.0 15.57 including disposal of unserviceable material and stacking of serviceable material with in 50

meters lead as directed by Engineer-in-charge. sqm 610.71 54.83 33,484.07

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

15.56 disposal of rubbish to the dumping ground within 50 metres lead. Sqm 1,000.00 53.17 53,174.45

REPAIRS TO BUILDING -

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,

including cutting the patch in proper shape, raking out joints and preparing and plastering the

surface of the walls complete, including disposal of rubbish to the dumping ground, all complete

as per direction of Engineer-in-Charge. -

56.0 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 40.00 545.37 21,814.66

TOTAL DISMANTLING & DEMOLITION WORK 2,62,944.86 -

BOQ- FURNITURE WORKS

S.N Items Unit QTY DSR Rate NDSR Rate Amount NDSR Amount

Providing and supplying of Senoir manager Table -2000x900x750 made upof Top shall be 18

mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2

mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle

board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish :

powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm

thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall

be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage

shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster)

plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock

with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7

mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick

CRCA Finish powder coat (epoxy polyster)

Providing and supplying os Side Unit -1340x450x750 made up Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster)

Providing and supplying of back storage Unit -2330x450x750 made up of Top of 4315 shall be

18 mm thick plain particle board (PLPB) Clad with 0.6 mm thick post formed laminate and 1 mm

3 MR thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The

Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative

Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Nos 23,697.83

"3 seater sofa :

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be

2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr

having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be

upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2

kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1

cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.)

and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and

3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It

should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

5 MR compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm.

Digitally signed by

Abstract CHANDRESH KUMAR 4

"Med Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall

be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

6 MR compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm.

RO head cabin -

Providing and supplying of Senoir manager Table -2000x900x750 made upof Top shall be 18

mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2

mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle

board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish :

powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm

thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall

be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage

shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster)

plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock

with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7

mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick

CRCA Finish powder coat (epoxy polyster) .

Providing and supplying os Side Unit -1340x450x750 made up Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster).

Providing and supplying of full height storage Unit -2400x450x750 made up of Top of 4315 shall

be 18 mm thick plain particle board (PLPB) Clad with 0.6 mm thick post formed laminate and 1

9 MR mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The

Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative

Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

Single seater sofa :

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be

860W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr

having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be

upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2

kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1

cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.)

and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and

3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It

should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

11 MR compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm.

"Med Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall

be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

12 MR compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm.

Workstations -

Digitally signed by

Abstract CHANDRESH KUMAR 5

The system shall be a desk-based system with a platform understructure made up of a

combination of MS. Tubes and plates. The terminating legs can be chosen from the different

varieties of inhouse design and manufactured legs. These terminating leg structure shall be in

M.S. CRCA sheet/ tubes/rods finished with epoxy power coating of the approved colour as per

the project designer. The terminating legs can be provided with modesty panels optionally. These

modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick

CRCA. The legs shall be provided with translucent glide screws to take care of the levelling as

per the site requirements. Worktop shall be made of 25MM thick Pre-Laminated Board. All the

edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued

with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as

well as for wire management on the workstation. Provisions for fixing of the switches shall be on

the wire tray/channel. Wire management shall be a part of the understructure and can be in the

13 MR form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management

throughout the cluster formation. Provision for separation of Data and power cable shall be

provided in the selected option. Wire riser leg or independent wire risers shall be provided as per

the layout structure. All the wire management components shall be of MS sheet with varying

thickness as required to support and form a sturdy understructure to carry wires. Screen shall be

provided as per the requirement of the design and layout. The screen finishes can be selected

from Fabric, laminated coloured glass, and DL marker board. Fabric screens shall be of 19 mm

overall thick, Glass screens are of 8 MM thick. The screens provided shall be complete with its

set of PDC clamps for fixing on the worktop. The fabric screens could be optionally provided as

removable screens also. The screens shall be placed along the width of the worktop. The overall

size of the worktop shall be 1200mm x 600mmD. The overall size of the workstation shall be

Size: 1200X600X750

Pedestal : 400x450x650

Providing and supplying of full height storage Unit -2400x450x2490 made up of Top of 4315

shall be 18 mm thick plain particle board (PLPB) Clad with 0.6 mm thick post formed laminate

and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading.

The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative

Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Nos 1 29502.30 29,502.30

Overhead Storage of size-3790x375x750 made up of 18mm thick ply with approved laminate of

1mm thickness . All expose edges are covered with 2mm thick edgebanding. Including all

necessary hardware such as wire baskets , hinges, locks, channels of approved brand Nos 1 47245.67 47,245.67

"Med Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall

16 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 5 8699.20 43,496.00

Providing and supplying of Pantry storage -2400x600x750 Overhead made up of 18mm thick ply

with approved laminate of 1mm thickness . All expose edges are covered with 2mm thick

edgebanding. Including all necessary hardware such as wire baskets , hinges, locks, channels of

Ozone brand .Without Stone. Nos 1 48745.54 48,745.54

Providing and supplying of modular breakfast table of size-1800x700x750 made up of 18mm

18 MR thick ply with approved laminate of 1mm thickness . All expose edges are covered with 2mm

thick edgebanding Nos 1 21867.99 21,867.99

Dining Chairs The seat and Back are made up of injection moulded high impact strength

PolyPropylene polymer compound with indoor grade UV resistance. Seat size shall be 52.5cm x

53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular welded frame is made of dia. 2.22cm

x 0.12cm and 3.5cm x 1.5cm x 0.12cm stainless steel 202 grade tube. The rubes are buff

polished to give shiny finish. The shoes and Amrest are made of high impacy strength

PolyPropylene polyemr compound with indoor grade UV resistance and pressed and press fitted

with tubular frame. The overall dimensions of the chair shall be 52.4cm x 55.8cm x 84.5cm. The

seating height shall be 45.0cm. Nos 6 5699.47 34,196.85

Providing and supplying of back storage Unit -1800x600x750 made up of Top of 4315 shall be

18 mm thick plain particle board (PLPB) Clad with 0.6 mm thick post formed laminate and 1 mm

thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The

Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative

Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Nos 1 21373.04 21,373.04

L type Reception Counter in ply & laminate Finish with the size of 1500x1490x600x1050

Supplying and placing in position Main desk of the following specifications. Main Desk size shall

be 900 Width x 600 Depth x 750 Height. The Top shall be in white cedar and black and shall be

18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty

panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white

Fully Unpolistered with a wooden base / Legs

Product weight will be 30 Kg Approx |Material: Fabric, Base: Wooden Base|

Product Dimensions: Width - 42.91 Inch, Length - 72 Inch, Height - 28.35 Inch, Seating Height -

18-19 Inch (Approx)"

Providing and supplying of single seater sofa Nos 1 67793.79 67,793.79

Corner Table: 450x450x450

23 MR The Oval shaped top will be in stone/ Corien with Plywood Supported Understructure in CRCA

MS frame with powder coated in the approved color Nos 1 6749.39 6,749.39

Digitally signed by

Abstract CHANDRESH KUMAR 6

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

24 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 1 9749.11 9,749.11

Providing and supplying of full height storage in FILE ROOM -2700x450x2400 made up of 18mm

25 MR thick PLPB of approved shade & make with necessary hardaware such as Lock, handle , Hinges

Providing and supplying of full height storage in FILE ROOM -1740x450x2400 made up of 18mm

26 MR thick PLPB of approved shade & make with necessary hardaware such as Lock, handle , Hinges

Providing and supplying of full height storage in FILE ROOM -1000x450x2400 made up of 18mm

27 MR thick PLPB of approved shade & make with necessary hardaware such as Lock, handle , Hinges

Cubicle tables -

Providing and supplying of Senoir manager Table -2100x750x750 made upof Top shall be 18

mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2

mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle

board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish :

powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm

28 MR thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall

be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage

shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster)

plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock

with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7

mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick

CRCA Finish powder coat (epoxy polyster) . Nos 2 37496.57 74,993.15

Providing and supplying os Side Unit -1285x450x750 made up Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

29 MR ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster) . Nos 2 14398.69 28,797.38

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

30 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 2 9749.11 19,498.22

Cabin Tables -

Providing and supplying of Senoir manager Table -1600x750x750 made upof Top shall be 18

mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2

mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle

board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish :

powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm

31 MR thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall

be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage

shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster)

plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock

with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7

mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick

CRCA Finish powder coat (epoxy polyster). Nos 1 29997.25 29,997.25

Providing and supplying os Side Unit -790x450x750 made up Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

32 MR ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster) . Nos 1 10349.05 10,349.05

Digitally signed by

Abstract CHANDRESH KUMAR 7

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

33 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm Nos 1 9749.11 9,749.11

"Med Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall

34 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 2 8699.20 17,398.40

13 seater: Conference Table

Supplying and placing in position Conference table of the following specifications . The top shall

be made from 25 mm thick pre- laminated board with 2 mm PVC edge beading. The

understructure shall have side panels of 25 mm thick pre-laminated twin with 2 mm thick PVC

lipping of same color on sides and 0.8 mm PVC lipping of matching coloron the bottom curve.

The Modesty shall be made from 18 mm thick pre-laminated board with 0.8 mm PVC lipping of

matching color. Centre Support Panel For 10 - Seater shall have panels made from 25 mm thick

pre- laminated twin with 2 mm PVC lipping of matching color on sides and 0.8 mm PVC lipping

of matching color on the bottom curve. The w/o wire management access flap and switch

mounting tray made from matt silver anodized aluminium extrusion and plastic moulded

components to facilitate access of electrical / data voice sockets from top Powder coated switch

mounting tray made made from 0.8 mm and 1.2 mm MS sheet . Switches to be mounted on tray

as per requirement . Wire manager REHAU made from RAU - PVC 1309/7558. Nos 1 233978.58 2,33,978.58

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

36 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 13 9749.11 1,26,738.44

Providing and supplying of MD Table -2000x900x750 made upof Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

37 MR ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster) . Nos 1 36746.64 36,746.64

Providing and supplying os Side Unit -1340x450x750 made up Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

38 MR ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster) Nos 1 11398.96 11,398.96

Digitally signed by

Abstract CHANDRESH KUMAR 8

MD Cabin High Back Chair Made up of combination of 12mm (7 layers) & 4mm (3 layers) thick

hot pressed plywood and 37mm thick, 32 Density U foam upholstered with fabric or Leatherite.

The back ply and foam is designed with contoured lumber support for achieving comfortable

seating posture. Back rest available in two sizes - High Back 860mm (H) X 550mm (W). The

backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat

foam upholstered with fabric. Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000

cycles to be completed with a load of 57kg impact force on the seat as per ANSI / BIFMA

X5.1.,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and

Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness

and reinforced with 2mm thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests

are fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick. HR steel.

39 MR 2D arms with height adjustable up to 80mm & front and back with adjustable up to 60mm. Arm

rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1.

MECHANISM : FOUR POINT SYNCHRO MECHANISM : Mechanism with two lever control for

lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is

tilting angle is 0°~6°. and back tilting angle is 89°~109°. Also it has the back tension adjustment

knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift

tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all

applicable ANSI/BIFMA, EN performance standard

BASE :ALUMINIUM BASE : The base made up of pressure die casted in aluminium fitted with

5Nos twin wheel castors. The base is 650mm pitch circle diameter. The base tested for static

load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTERS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and

diameter of Castor 50 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

40 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 2 9749.11 19,498.22

The system shall be a desk-based system with a platform understructure made up of a

combination of MS. Tubes and plates. The terminating legs can be chosen from the different

varieties of inhouse design and manufactured legs. These terminating leg structure shall be in

M.S. CRCA sheet/ tubes/rods finished with epoxy power coating of the approved colour as per

the project designer. The terminating legs can be provided with modesty panels optionally. These

modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick

CRCA. The legs shall be provided with translucent glide screws to take care of the levelling as

per the site requirements. Worktop shall be made of 25MM thick Pre-Laminated Board. All the

edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued

with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as

well as for wire management on the workstation. Provisions for fixing of the switches shall be on

41 MR the wire tray/channel. Wire management shall be a part of the understructure and can be in the

form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management

throughout the cluster formation. Provision for separation of Data and power cable shall be

provided in the selected option. Wire riser leg or independent wire risers shall be provided as per

the layout structure. All the wire management components shall be of MS sheet with varying

thickness as required to support and form a sturdy understructure to carry wires. Screen shall be

provided as per the requirement of the design and layout. The screen finishes can be selected

from Fabric, laminated coloured glass, and DL marker board. Fabric screens shall be of 19 mm

overall thick, Glass screens are of 8 MM thick. The screens provided shall be complete with its

set of PDC clamps for fixing on the worktop. The fabric screens could be optionally provided as

removable screens also. The screens shall be placed along the width of the worktop. The overall

size of the worktop shall be 1200mm x 600mmD. The overall size of the workstation shall be

Size: 1200X600X750

Providing and supplying of Full Height Unit -2400x450x2100 made up of Top of 4315 shall be 18

mm thick plain particle board (PLPB) Clad with 0.6 mm thick post formed laminate and 1 mm

thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The

Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative

Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading Nos 1 75593.08 75,593.08

Providing and supplying of Senoir manager Table -1600x750x750 made upof Top shall be 18

mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2

mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle

board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish :

powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm

43 MR thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall

be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage

shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster)

plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock

with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7

mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick

CRCA Finish powder coat (epoxy polyster) . Nos 1 29997.25 29,997.25

Providing and supplying os Side Unit -790x450x750 made up Top shall be 18 mm thick Pre

laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC

edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The

Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat(

epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW

44 MR ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection

moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be

having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the

drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10

lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick

CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish

powder coat (epoxy polyster). Nos 1 10349.05 10,349.05

Digitally signed by

Abstract CHANDRESH KUMAR 9

"High Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 70.5 cm (H). The HR polyurethane foam shall

45 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min99.5 to max 110.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm. Nos 1 9749.11 9,749.11

"Med Back chair: ( Mesh Chair in White Colour )

The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per

QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery

covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0

cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame

of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar

support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn.

The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall

46 MR be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25%

compression. The one-piece armrests shall be injection moulded from black Co-polymer

Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt

m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height

adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece

telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection

moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal

is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be

injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to

max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from

pedestal - Width-76.3 cm and Depth-76.3 cm Nos 2 8699.20 17,398.40

Back Storage Unit 1500X450X750 made up Top shall be 18 mm thick Pre laminated particle

board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding.

Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular

frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy

polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube

47 MR ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded

polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell

and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front

shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and

handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA

Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder

coat (epoxy polyster) . Nos 1 13108.81 13,108.81

Full height storage 1400X450X2400 made up Top shall be 18 mm thick Pre laminated particle

board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding.

Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular

frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy

polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube

48 MR ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded

polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell

and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front

shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and

handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA

Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder

coat (epoxy polyster) . Nos 1 46015.80 46,015.80

Total furniture 2168783.92

BOQ of PLUMBING

S.N Description Unit DSR Amount NDSR Amount

DSR-2023 DSR Rate NDSR Rate

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with

dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat 1,02,159.21

cover, and cistern fittings nuts Bolts and Gasket Etc

Providing and fixing Under counter with white glazed vitreous china wash basins with C.P. brass

eurometic self closing pillar tap with flow rate of 3.8 LPM complying to Green Building, C.P.

brass waste and unions and sealing of joints between wash basins and counter slabs around the

wash basins with Silicone rubber cement of approved make of matching colour all complete

88 MR-1 including cutting and making good the walls and floors where required. Each 5.00 7,340.62 36,703.11

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with

white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders

with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass, including painting of fittings and cutting and making

good the walls and floors wherever required :

90 17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern Each 3.00 21462.68 64,388.03

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm

deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as direction of En ineer-

in-cha e and finished smooth.

91 8.10.1 White Agaria Marble Stone sqm 6.00 3405.50 20,433.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS:13983 with C.I.

brackets and stainless steel plug 40 mm, including painting Of fittings and brackets, cutting and

17.10 making good the walls wherever required :

Providing and fixing of C.P WALL MOUNTED SWIVEL SPOUT KITCHEN SINK MIXER with all

93 MR-2 accessories as per approved specifications, Material: Brass,Mounted : Wall mounted,Series :Florida Each 3.00 1,619.84 4,859.53

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved

17.22B by Engineer in charge

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long

with S.S- triangular plate to Eureopean W.C- of quality and make as approved by 1,698.61

95 17.16A Engineer - in - charge- Each 5.00 339.72

Providing and fixing C.P. brass long bay bib cock of approved quality conforming

18.51 to IS standards and weighing not less than 690 gms-

Digitally signed by

Abstract CHANDRESH KUMAR 10

17.34 Providing and fixing toilet paper holder :

Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw

98 MR-3 complete as required. Each 5.00 401.44 2,007.20

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

Providing and fixing 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers

Without Nipple (Suitable for Geysers)

15 mm nominal bore

102 MR-5 Providing & fixing of ABS plastic body liquid soap dispenser of approved design and make. Each 5.00 1,543.66 7,718.31

103 MR-6 Providing & fixing of C.P. brass Soap Dish holder of approved design and make. Each 5.00 1,433.07 7,165.36

Providing and fixing of C.P Towel rail with all accessories as per approved ACC04

specifications, with 600 mm length, SS 721.65 304, and making good the walls wherever

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and 7,822.68

105 17.31 washers complete. Each 5.00 1564.54

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

106 17.22A direction of Engineer-in-charge. Each 5.00 1006.86 5,034.30

Supply of solid state, no touch operating, fully hygienic hand drier of approved shade with single

blower, with time delay, summer & winter control, music while drying, volume ON/OFF controls

107 MR-7 complete as required. Each 5.00 8,486.58 42,432.90

Providing and fixing of Storage type water heater/ Geyser with required accessories like 15 mm

CP angle valve on inlet & outlet line, heavy duty reinforced flexible PVC connector for cold water

line and flexible CP brass connector with CP checkout for hot water line, CPVC line connection,

MS bracket with two coats of enamel paint, anchor fastners etc. to hang the units, providing and

fixing of 16 A 3 Pin plug of Anchor make, etc. complete as required.

108 MR-8 Capacity 15 Liters Each 1.00 14,260.81 14,260.81

B. WATER SUPPLY (INTERNAL)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same including testing of joints

18.8 complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

109 18.8.2 20 mm nominal outer dia Pipes Metre 19.00 523.08 9,938.61

110 18.8.3 25 mm nominal outer dia Pipes Metre 16.00 610.31 9,765.03

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe -

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

18.7 solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall -

110 18.7.2 20 mm dia nominal bore Metre 34.00 325.96 11,082.47

111 18.7.3 25 mm dia nominal bore Metre 12.00 390.71 4,688.50

18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

112 18.12.3 25 mm dia nominal bore Metre 10.00 455.12 4,551.21

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats

18.18 complete :

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : -

Providing and fixing motorized valve including control wiring upto panel & ON/OFF arrangement

and all other accessories required to make the system complete including control unit to be made

of good quality PVC box, as per IP 65 with cable gland also as per IP 65 and suitable for

outdoor installation complete with suitable wiring. This unit should be suitable to operate solenoid

valve, float switch and consisting of contactors, control transformer, MCB, Potential free

contacts for BMS, indicating lamp for automatic operation of filling OH tank with level to be

mentioned between 70% (low) to 100% (full)

115 MR-9 25mm nominal bore Each 2.00 16,777.42 33,554.84

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701

marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for tank. per liter 3,000.00 10.70

INTERNAL DRAINAGE (SOIL, WASTE, VENT, RAIN WATER

C. PIPES & FITTINGS)

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system conforming to IS : 13592

(Type-B) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses,

boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other

materials, plugs, reducers, cowls, offset and other specials. Jointing shall be done with push fit

EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and

specials which are not manufactured with push fit rubber joints. Fixing at wall/ceiling level

supported by galvanized steel clamps & hangers etc. Making proper connection and also pipes

may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall

be encased with not less than 75 mm thick cement concrete (1:2:4) all around. The installation

shall be complete in all respects including cutting chases / holes in walls, slabs and making good

the same as per specifications. (All major MS structure to hold the stack is included in this item).

Providing, jointing, testing and fixing UPVC Rain water system conforming to IS : 13592 (Type -

A) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss

connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other

materials, plugs, reducers, cowls, offset and other specials. Jointing shall be done with push fit

EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and

specials which are not manufactured with push fit rubber joints. Fixing at wall/ceiling level

supported by galvanized steel clamps & hangers etc. Making proper connection and also pipes

may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall

be encased with not less than 75 mm thick cement concrete (1:2:4) all around. The installation

shall be complete in all respects including cutting chases / holes in walls, slabs and making good

the same as per specifications. (All major MS structure to hold the stack is included in this item).

Digitally signed by

Abstract CHANDRESH KUMAR 11

Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe

conforming to IS :4985-1983 of class 3 (6kg/cm2) as specified below and fittings (moulded as

well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with

suitable extension piece for drain point and other specials jointing with cement solvent, chasing,

cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick

concrete all around, complete in all respects including testing of complete installation.(All major

MS structure to hold the stack with fixing including anchor fasteners, sand, cement etc is included

121 MR-13 40 mm od 6 kg/cm2 (Class III ) Metre 2.80 232.14 650.00

122 MR-14 63 mm od 6 kg/cm2 (Class III ) Metre 0.80 304.13 243.30

Providing and fixing UPVC/SWR trap (P trap) of self cleaning design as per IS:13592 : 1992

complete including cost of cutting and making good the cutouts in walls and floors etc.including

cutting and making good the walls and floors wherever required complete.

123 MR-15 110 mm inlet and 110 mm outlet Nos. 12.00 314.23 3,770.77

Providing and fixing floor drain made out of 110x63 mm OD uPVC elbow connected to uPVC

124 MR-16 pipe complete as per direction of Project Manager. Nos. 12.00 112.76 1,353.16

Providing and fixing Inlet Fitting for Urinal trap, formed out of 110 mm PVC pipe with multiple

MR-17 side inlets formed with saddle pieces, suitable for 40, 50 and 63 mm dia side connections as per

standard detail and support through galvanized steel support from slab or set in cement concrete

125 mix 1:2:4 including cutting and making good the walls and floors wherever required. Nos. 3.00 167.18 501.54

Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring. Including

MR-18 110 mm dia PVC pipe / bend of required length and proper connection with M seal to C.I. pipe

126 complete as required. Nos. 5.00 159.88 799.42

Sub Total 31,028.35

DSR Ref- Description Unit DSR Rate NDSR Rate DSR Amount NDSR Amount

A ELECTRIC PANEL AT SUB STATION

Supplying, installation, testing & commissioning of cubicall type LT panel suitable for 415 V, 3

Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA

sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning &

MR 1 finishing complete with 7 tank process for powder coating in approved shade as per standard. Each 1.00 1,23,209.00

320A 4P 36kA MCCB TM Release, Type: DN1-250C, 415V AC, 50Hz

Extended Rotary Handle for DN1 MCCB O/G -1Nos 200A 4P 36KA MCCB 3 Nos 100A 4P

25KA MCCB 123209.00

TOTAL CARRIED TO SUMMERY 1,23,209.00

B Main Distribution Board AT 3RD FLOOR

Providing and fixing following rating and breaking capacity and pole MCCB With thermomagnetic

2.2 release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle

panel, rnaWng connectors, etc. as requWed.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB

distribution board Of sheet steel, dust protected, duly powder painted, inclusive Of 200 A tinned

2.5 copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs

and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

Supplying and fixing following rating, TP, 415 V, MCB in the existing MCB DB complete with

connections, testing and commissioninq etc. as required

TOTAL CARRIED TO SUMMERY 23,503.84 8454

C DISTRIBUTION BOARDS

Supplying and fixing following way, horizontal type three pole and neutral, sheet Steel, MCB

distribution board, 415 V, on surface/

DSR 2.4 recess, complete With tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc.

as required. (But without MCBIRCCB/lsolator)

Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker

2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Single pole and neutral

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, MCB in the existing DB complete with

connections, testing and commissioninq etc. as required

TOTAL CARRIED TO SUMMERY 86,148.32 8454

Supply of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100

volts grade, cross-sectional area as follows

Laying of one number PVC Insulated and PVC sheathed XLPE power cable of 1.1 KV grade of

7.1 following size direct in ground including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for

following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

TOTAL CARRIED TO SUMMARY 174492.032 491170

HOT DEEP GI CABLE

TRAYS & GI RACEWAYS

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

146 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 48 740.7670844 35,556.82

147 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 48 996.3110367 47,822.93

TOTAL CARRIED TO SUMMERY 83,379.75 -

148 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

5.15 Providing & fixing of 25mm x 5mm GI strip on surface or recess for earth connection as required. Meter 11 252.4401796 2,776.84

5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Meter 9 72.421363 651.79

Digitally signed by

Abstract CHANDRESH KUMAR 12

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing enclosure With Cover

plate having bocking arrangement and watering pipe of 2.7 metre

151 Iona etc. with charcoal/ coke and salt as required. 7730.463205

TOTAL CARRIED TO SUMMERY 92,223.43

G INTERNAL WIRING:

Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable

1.3 in surface / recessed steel conduit, with modular switch, modular

plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as required.

Wiring for group contrdled (looped) light point fan point/exhaust fan point/ bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper comiuctor core cabe in

1.54 surface/ -

recesed steel conduit, and earthirg the 1.5sq. mm FRLS

PVC insulated copper conductor single core cabb etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

1.5 cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper meter 210 94,075.35

154 conductor single core cable for loop earthing as required. 447.9778597

Wiring for circuit/ submain wiring alongwith earth wire with the

1.7 following sizes of FRLS PVC insulated copper conductor, single -

core cable in surface/ recessed steel conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface

1.31 or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A Each 24 11,844.00

157 modular switch, connections etc. as required. 493.4998593

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

1.32 recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A Each 21 12,731.68

158 modular switch, connections etc. as required. 606.2702674

Supplying & fixing suitable size GI box wih modular plate and cover in

front on surface or in recbss including providing and fixing 25 A modular

socket outlet and 25 A modular SP MCB, "C" curve including

159 connections, painting etc. as required. 752.1475843

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

TOTAL CARRIED TO SUMMERY 6,63,836.97

H LIGHTING FIXTURE AND FANS

Supply, Installation, testing and commissioning of following type Fluorescent/ Compact

fluorescent/LED light fixtures on wall/ Ceiling including all fixing accessories such as leads, etc

complete as required. The Fluorescent /CFL fixtures shall be complete with Low loss copper

ballast PF improvement capacitor, Bipin Rotor type lamp holder, starter, starter base, all pre

wired upto the terminal block. All fixtures shall be supplied with lamps.

161 MR 6 SITC of 12 W recess type LED downlighter neutral white (4000K) with LED Light Nos 84.00 605.00 50,820.00

162 MR 7 SITC of 18 W recess type LED downlighter neutral white (4000K) with LED Light Nos 9.00 873.00 7,857.00

163 MR 8 SITC of surface mounting 30 W Rating Lighting schindler Nos 6.00 6988.00 41,928.00

SITC of 36 W, 2 feet *2 feet LED Panel Light, Cool White (CW): 6500K ±500K ,

Recessed/surface panel for false-ceiling complete set

165 MR 10 SITC of LED Strip Lights 50 Mtr Roll Roll 1.00 5804.00 5,804.00

166 MR 11 SITC of 12 W Hanging spotlight No. 8.00 2021.00 16,168.00

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm Sweep with,

blades, and frame and louvers

169 MR 14 SITC of LED MIRROR LIGHT 6W No. 4.00 2017.00 8,068.00

SITC of Industrial socket 16 Amp along with FRLS PVC insulated copper conductor single core

MR 15 cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper

170 conductor single core cable for loop earthing as required. No. 26.00 1236.00 32,136.00

TOTAL CARRIED TO SUMMARY 3,13,104.00

I UPS/Inverter System

SITC of 6 KVA, 3PH:3PH ONLINE UPS 3/3 PHASE WITH INBUILT ISOLATION

TRANSFORMER at 50 Hz, batteries backup of minimum 30 minutes duration including SMF

MR 16 Nos 1.00

batteries (12V), controls, protection and instruments etc. complete as required. Cost to include

171 battery stand/rack, interconnecting cables etc. 152608.00 1,52,608.00

TOTAL CARRIED TO SUMMARY 1,52,608.00

J Electric Meter With Panel

SITC of Meter With Panel set 4 pole mccb 200 amp, CT 200 A rating, box 1000x400x300

MR 17 approx, Nos 1.00

TOTAL CARRIED TO SUMMARY 40983.00

BOQ Low Voltage

DSR REF Description Unit DSR Rate NDSR Rate DSR Amount NDSR Amount

A TELEPHONE SYSTEM

S.I.T.C. telephone point wiring with 2 pair telephone wires of minimum 0.61mm. diameter

annealed copper wire, PVC insulated, PVC sheathed in 25 mm diameter concealed PVC conduit

system complete with all accessories, sheet steel terminal box and socket to accept RJ-11 plugs

173 as follows

Telephone point wiring with 2 pair telephone wires for one no. telephone socket out let. Each 18

Telephone tag block as per ITI design for termination of specified number of pairs housed in

suitable sized Sheetsteel Box with hinged cover duly painted tag box and

making the connections as follows

Telephone wires Mtr 95

Digital EPABX (specified make) equipped for 8 Trunks and 50 nos. extensions user ports

complete with : Each 1

one Operator Console with 24 Key DSS.

Built-in Charger & battery back-up (at-least for 4 Hrs.),

facilities such as ISDN, DTMF/DISA, Conference, MDF,COLA

for PIT protection,

TOTAL CARRIED TO SUMMERY Set 1 177089 177089

B LAN NET-WORKING SYSTEM

S.I.T.C. Network point wiring for computer local area network (LAN) comprising of RJ-45 socket

connectors connected to a 10 base T network using UTP category 6 cable (CAT 6). The cable

shall be laid in 25 mm. diameter concealed /exposed metallic I PVC conduit system and shall be

174 complete with

Sheet metal switch box & RJ-45 connector-socket at one end and male connector at the other

end (Hub end) Each 66

24 Ports, 10/100Mbps, + 2 Port 1 OOOBase-T Unmanaged .

Stand-alone Switch. Each 1

19" 6U Rack with accessories Each 1

Patch panel Each 1

Cable Manager Each 1

Patch Cord Each 66

Information outlet ( 1/0) Each 66

Wi-Fi Router ( 50 mtr. Range ) Each 1

TOTAL CARRIED TO SUMMERY Set 1 75069 75069

BOQ FIRE FIGHTING

S.N Description Unit DSR Amount NDSR Amount

DAR-2022 DSR Rate NDSR Rate

Digitally signed by

Abstract CHANDRESH KUMAR 13

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and minimum 120 detectors loop and

loop length up to 2 k m, network communication card, minimum 320 character graphics/ LCD

display with touch screen or other keypad and minimum 4000 events history log in the non

volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back- up with 24 volt

17.2 sealed maintenance free batteries with automatic charger. The

panel shall have facility to connect printer to printout and facility to have seamless integration with

analog/digital voice evacuation system (which is part of the schedule of work under SH: PA

System) and shall complete with all accessories . The panel shall be compatible for IBMS system

with open protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of indicator on

176 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all Each 5 1,427.74

connections etc as required. 285.5470884

Supplying, installation, testing & commissioning of intelligent addressable

177 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor complete Each 25 70,507.37

with base as required. 2820.294793

Supplying, installation, testing & commissioning of addressable manual call

point complete as required.

Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE

179 17.4.1 with end caps including making air sampling opening of appropriate dia on Mtr 120 6,952.45

appropriate interval and all accessories as required,(rate for area protected in 57.9370904

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1 OOOV rated

180 17.5.2 with annealed conductor having XLPE insulation, steel wire armouring Mtr 150 26,847.63

& FRLS outer sheath com lete asre uired. 178.9842257

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets -

etc. and fixing the pipe on the wall/ceiling With suitable clamp/support frame and painting With

18.7 two or more coats Of synthetic enamel paint of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to -

18.11 IS 13095 of following sizes as required :

18.15 Providing, installation, testing and commissioning Stainless steel strainer fabricated out of 1.6

mm thick stainless steel sheet with 3 mm dia holes with stainless steel flange -

providing, installation, testing and commissioning Of non-return valve Of

following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, -

18.14 nuts, washers etc.as required :.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68

degree centigrade with required accessories :

192 18.21.1 Pendent Sprinkler Each 54 540.0564498 29,163.05

Supplying, installation, testing & commissioning of sprinkler flexiblepipe (UL Listed) of stainless

steel complete with 15 NPT on reducer thread with maximum working pressure Of 175 PSI test

pressure Of 875 PSI (Burst) With branch line (Inlet) 25mm NPT male thread to sprinkler head

(Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as required.

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white

finish UL Listed or FM approved complete as required.

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

Providing & fixing Of pressure switch in M.S. pipe line including connection etc. as required.

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S.

cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal

discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket

conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets

MR-1 complete with internal charge.

Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. cylinderical

body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube

30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to

IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with

MR-2 inernal charge.

DSR-2019 Description of Item Unit DSR Rate (INR) NDSR Rate DSR Amount NDSR Amount (INR)

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100%

hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors

(with individual separate PCB) for above 14HP modules, microprocessor based Controller, top

discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with

suitable foundation etc. complete as required. To have better efficiency condenser fan shall be

capable to operate at different speed with respect to load. The unit shall deliver the rated

capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at

50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated

capacity upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase,

50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the

refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film

to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion,

and reduce the risk of degradation, thereby improving overall performance and durability. The

Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation

and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD

specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 7.4,

Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building)

Digitally signed by

Abstract CHANDRESH KUMAR 14

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette

Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan /dynamically balanced blower, multispeed motor, coil section with DX Copper

coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz

AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from

the BMS System/Fire Signals. The system shall be capable to adjust air flow as per room

requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27

Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor)

Supply, Installation, Testing and Commissoning of following minimum capacity Shgle way

wall/corner VRVNRF Cassette Type Indoor ceding mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise fan/dynamically balanced bbwer, multispeed

motor, coil section with DX Copper cod, electronic expansion valve, outer cabinet, drain pump,

grill, necessary supports, vbration Isolation, Corded remote control etc., suitable for operation on

single phase 230 V ± 10%, 50HzAC supply,complete, as requWed. The Indoor units must shut

down upon receiving a singal from the BMS System/Fire Signals. The system shall be capable to

adjust air flow as room requirement automatically. The cooling capacity of indoor unit will be at

air inlet conditions of 27 Degree C DB and 19 Degree C WB tem perature. (Make will be same

7.6 as of Outdoor)

4 Copper piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

206 7.14.10 34.9 mm dia OD Hard drawn with tube thickness 162 mm Rmt 60.0 1,286 77160

207 7.14.8 28.58 mm dia (OD) (Hard drawn with tube thickness 12 mm Rmt 32.0 1,157 37024

208 7.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 12 mm Rmt 45.0 1,068 48060

209 7.14.6 22.2 mm dia (00) (Hard drawn) with tube thickness 12 mm Rmt 73.0 904 65992

210 7.14.5 19 mm dia (00) (Hard drawn) with tube thickness 1.2 mm Rmt 25.0 739 18475

211 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 12 mm Rmt 28.2 615 17324.55

212 7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 12 mm Rmt 31.6 487 15389.2

213 7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 12 mm Rmt 101.2 346 35004.82

214 7.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 12 mm Rmt 31.6 256 8089.6

Supply, Installing, testing and commissioning of UPVC pipe for condensate complete with 9mm

thick nitrile rubber insulation covered with inter woven glass cloth for CAHUs/ FCU, cut to

required length with necessary, clamps, supports, hangers, fittings such as bends, tees, reducers

etc to nearest drain point complete as per technical specifications with all the necessary

5 mounting accessories as required for complete installation.

Supply, Installation, Testing and CommissOning of YIT/Multi Joints. Joints

218 7.13 shall be ofsameoriginal Equipment Manufacturer (OEM) makeas of ODUs

7.13.1 Indoor Unit Each 12 4,535 54420

7.13.2 Outdoor unit Each 3 8098 24294

Controlcable: - Supply and laying, testing & commissioning of following sizes of copper conductor

control cables on existing tray including fixing clamps & proper connections to equipment etc.

9 complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

DSR-EL- surface/recess including cutting the wall and making goodthesamein caseofrecessed conduit as

2022/1.21 required.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays

DSR-EL- with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended

2022/4.1 from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etcas required.

221 4.9.2 150 mm width X 50 mm de th X 1.6 mm thickness Metre 55 1,383 76,065.00

223 MR-6 Cordless remote controller for indoor units Nos 3 2,800 8,398.66

Electric Panel For VRV out Door Unit

Designing, fabrication, Supplying, Installing, testing & commissioning of cubical type main MV

panel board suitable for 3 phase, 415 V, 50 Hz and of 35 MVA rupturing caoacity at 415 volts,

fabricated from minimum 2mm thick CRCA Sheet powder coated through seven tank process

facility for pickling and degreasing complete with following mountings, inter connections etc as

required (Main Electric Panel). The panel shall be free standing floor/wall mounted, dust and

vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats

wherever necessary. 16 gauge CRCA sheet steel shall be used for final distribution panels. 3

mm thick cable gland plates shall be provided on top as well as at the bottom of the panels.

Panels shall be treated with all anti corrosive process before powder coating as per

specifications and final approved shade. 2 Nos. earthing terminals shall be provided for all

distribution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system.

Lifting hooks shall also be provided in case of large panels. Approval shall be taken for

each panel in the form of shop drawings. Galvanized hardware with zinc passivated shall be

used in fabrication of panels. Degree of ingress protection of IP-55 for Outdoor.

Main Incomer With Metering & Control

63 A FP MCB 16KA With Microprocessor based release having S/C & O/L Protection. BUS

BAR Electrolytic Grade Aluminium Busbar with PVC Heat Shrinkable Colour Coated Sleeve

Suitable for Incoming & Outgoing Feeders (Main Busbar 100A Aluminium)

Outgoing Section - -

4P 25A 10kA Thermal Magnetic Release based MCCB (With S/C,O/L Protection) -3 Nos

233 MR-16 TOTAL CARRIED TO SUMMARY set 1.0 85500.00 85,500.00

Supply of Al. Arm. XLPE

Total Amount (INR) 1639098.82 1,28,311.99

Total Amount (INR) 1639098.82 1,28,311.99

BOQ - AUDIO VISUAL SYSTEM

S.No Description Unit DSR Rate/MR Rate NDSR rate DSR Amount NDSR Amount

AUDIO-VIDEO system

SITC of audio-video system as per standard with required necessary items.

MR 1 Interactive Flat Panel Nos 1

SITC of 86” display size with 4K Ultra-HD (3,840 x 2,160) resolution , Backlit D-LED (IPS Panel)

, Viewing Angle : 178°/178°, Life Time : 50,000 Hours , Wireless Screen Sharing, Screen

Broadcasting, Whiteboard, WPS, Teaching Tools, Screen Recording, Live Annotation, Browser,

App Store, Media Player , WiFi 6 (802.11a/b/g/n/ax 2.4 GHz/5GHz), Bluetooth 5.2 , 1 x HDMI-

Out (up to 4K@60Hz), 1 x Line-Out (3.5mm mini jack ), 1 x SPDIF-Out , 1 x Mic (3.5 mm mini

jack), 3 x HDMI 2.0 (60 Hz /4K) , Thick Toughened Glass (Level 7H on Mohs scale of Mineral

Digitally signed by

Abstract CHANDRESH KUMAR 15

MR 2 Speaker with wall mount bracket Nos 2

236 SITC of Line Array Column Loudspeaker , Built-in 70V/100V transformer, plus 8 ohm direct 58,459.56 1,16,919.12

MR 3 Amplifier/Mixer Nos 1

SITC of Commercial mixer/amps , 8 inputs with 2 outputs of 40,80, 120-watts of power , 120W

TOTAL CARRIED TO SUMMARY 3,97,796

Digitally signed by

Abstract CHANDRESH KUMAR 16