REPAIR TO FENCING, GATES, DRAIN, FOOTPATH AND HARDSTANDING AT MIL STN GANDHINAGAR

Amount

M&L for plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1, using 40 mm graded stone aggregate as in surface channels complete all as specified and directed.

M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in copings, hold fast block etc. Including necessary form work complete all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4), type B1, using 20mm graded stone aggregate, solid block in kerb stone set in cement mortar (1:4) complete all as specified and directed.

M&L pre-cast reinforced cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate for drain covers etc. set in cement mortar (1:4) complete all as specified and directed. Note: Reinforcement shall be measured and paid seperately.

M&L factory made precast reinforced cement concrete post/strut 1:2:4 type B1 using 20mm graded stone aggregate with reinforcement of 4mm dia tendon wire complete all as specified and directed. (Note : reinforcement shall be measured and paid separately)

Supply only, integral water proofing compound.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 but except bricks complete all as specified and directed.

S&F, mild steel work such as angle, tee and flat iron etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Fixing only mild steel work such as angle, tee and flat iron etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. conforming to Fe-290 (Gde E-165) complete all as specified and directed. (Refix old retrieved steel post/strut) complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed

S&F, small items such as pintel hinges, lage hasp & staple, hand made sliding bolts, hold fast etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire 0.9 mm dia complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L, in repair, galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

M&L for restraining and resecuring old barbed wire fencing in any description including making good staples etc. complete all as specified and directed.

Supply only mild steel galvanised, plain wire of 4mm dia as in reinforcement of precast RCC post complete all as specified and directed.

Supply only mild steel galvanised, chain link fencing of any size or shape complete all as specified and directed.

M&L for taking down mild steel rolling shutter any size manual operated, oiling, greasing, and staraigtning the lath, lock rail, guide channel, gears, connecting rods, shaft of MS hallow pipes and helical springs etc and replacement of any members of rolling shutters such as lath, helical spring, shaft, gears, connecting rod, hood cover and guide channel etc (Note : Replacement items measured and paid separately)

M&L for taking down mild steel rolling shutter any size gear operated, oiling, greasing, and staraigtning the lath, lock rail, guide channel, gears, connecting rods, shaft of MS hallow pipes and helical springs etc and replacement of any members of rolling shutters such as lath, helical spring, shaft, gears, connecting rod, hood cover and guide channel etc (Note : Replacement items measured and paid separately)

Supply only, 0.80mm thick MS lathe of rolling shutters of any size complete all as specified and directed.

Supply only, 0.63mm thick MS hood cover of rolling shutters of any size complete all as specified and directed.

Supply only, 1.25mm thick guide channel of rolling shutters in any length complete all as specified and directed.

Supply only, 600mm long MS helical spring suitable for shaft of rolling shutters complete all as specified and directed.

Supply only, 40mm dia medium weight MS tube shaft for rolling shutters complete all as specified and directed.

Supply only, 1.25mm thick only lock rail any size with provision of side locking arrangement for rolling shutters complete all as specified and directed.

Supply only, safety lever locks of mild steel with 4 leversfor rolling shutters complete all as specified and directed.

Supply only, ball bearing for rolling shutters complete all as specified and directed.

M&L for 100mm thick cement concrete (1:2:4), type B-2 (using 40mm graded stone aggregate) as in floor etc. finished surfaces even and smooth without using extra cement complete all as specified and directed .

M&L for 75mm thick cement concrete 1:3:6 type C-2, using 40mm graded stone aggregate as in in sub base of floore etc. and finished even and fair without using extra cement complete all as specified and directed.

M&L, for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size of M-35 grade including and over sand cushioning complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cmx20 cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in cm (1:4) complete all as specified.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for cement plaster 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces mixed with using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cement to receive WPT complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Dismantling of stone slabs and paving tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling expanded metal, any thickness or nesh, fixed with steel or wood fillets, if any n.exc 4 kg weight per sqm complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in (Concrete, brick work, masonry), portion and making good sturbed ground complete all as specified and directed.

M&L brick work with sub class 'B' bricks laid flat beded and jointed in cement mortar 1:6 and pointed out in CM1:3 as in drain complete all as specified and directed.

M&L brick work with sub class 'B' bricks laid on edges and jointed in cement mortar 1:6 and pointed out in CM1:3 as in drain complete all as specified and directed.

Raking out joints/ pointing brick work in walls or bricks laid in flat in floor, surface channel etc and flush pointing CM mortar 1:3 complete all as specified and directed.

Raking out joints/ pointing brick work in walls or bricks laid on edges, surface channel etc and flush pointing CM mortar 1:3 complete all as specified and directed.

Ramdev and Sons

M/s ESS KAY Construction

Choudhary Traders and Engineers

Shree Builders

ARTI CONSTRUCTION