tes

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484.

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing using 75% of naturally occurring Dust and 25% of course sand spreading in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing Flooring with Cement Concrete 1:6:10, using 40mm metal, 100mm thick and plastered over with 12 mm thick in CM(1:3) including seigniorage charges, etc., complete for finished item of work complete for finished item of work, including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) Without Form Work

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive streangth not lessthan 75 kg/sq.cm for walls for Superstructure Walls including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Supply, Delivery & Fixing of MS fabrication works., as directed by Engineer-in-charge of the work, the rate includes fabrication, transportation, erection & fixing at work site and painting with red oxide coat etc., and overheads & contractors profit complete for finished item of work .

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for New Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of 90mm dia PPR Stand Ball valve confirming to Din standards 8077/8092, including cost and conveyance of all materials to site, labour etc. complete for finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) For 11.20mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) For 28.60mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) For 34.90mm OD Pipe - SDR 13.5

Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia BMW -I.415

Repairing, servicing and restoring the existing MS gate to proper working condition, including removal and refixing wherever required, straightening of bent members, cutting, welding, fabrication, grinding, replacement of damaged hinges, rollers, locking arrangements, nuts, bolts, clamps and other minor hardware/accessories, rectification of damaged structural members and proper alignment and levelling of the gate. The work shall further include thorough surface preparation by scraping, wire brushing and emery rubbing, removal of rust, dirt, grease and loose/peeling paint, application of one coat of approved anti-corrosive metal primer and two coats of approved exterior grade synthetic enamel paint of approved make such as Asian Paints, Berger Paints, Nerolac or equivalent, including painting of all exposed MS surfaces and touch-up painting of repaired portions. The item shall include lubrication of hinges and moving parts, testing for smooth opening and closing, final adjustment and cleaning of the site, including all materials, labour, fabrication charges, transportation, loading, unloading, tools and tackles, lifting arrangements, scaffolding and all incidental charges complete as directed by the Engineer-in-Charge.

Removal, shifting, repairing, refurbishing, supplying incidental materials, reinstallation and commissioning of existing children's play equipment from the existing location to the allocated space within the park/site, including dismantling, transportation, alignment, levelling and fixing complete. The item shall include straightening of bent members, cutting, welding, grinding, replacement of damaged nuts, bolts, bearings, bushes, chains, hooks, clamps, fasteners and other minor accessories wherever required, excavation and fixing in PCC (1:2:4) concrete foundation of suitable size, curing and backfilling. The work shall further include surface preparation by scraping, wire brushing and emery rubbing, applying one coat of approved anti-corrosive metal primer and two coats of outdoor grade weather-resistant PU or synthetic enamel paint of approved make such as Asian Paints, Berger Paints, Nerolac or equivalent, including lubrication of moving parts, testing, safety inspection, cleaning of the site and handing over the equipment in complete working condition, including all labour, materials, transportation, tools and tackles, scaffolding and incidental charges complete as directed by the Engineer-in-Charge

Supply of and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH For CC for Park joinings

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH For Brick work damaged

Designing, manufacturing, supplying, delivering, installation and erection of internally illuminated Box Type Name Board of required size, fabricated using GI 1" diameter pipes / GI hollow sections of suitable gauge and thickness, forming a rigid box frame, including closing the rear, top, bottom and side faces with 4 mm thick Aluminium Composite Panel (ACP) sheet of approved make, properly fixed to the GI frame. The front face shall be provided with suitable thickness transparent / translucent acrylic sheet of approved colour and finish, over which approved grade self-adhesive vinyl / 3M retro-reflective or translucent vinyl film shall be pasted, with required letters, logo and designs computer-cut to the approved artwork, such that the letters / graphics are clearly highlighted when illuminated. The box shall be provided with suitable high-efficiency LED modules / LED strips of approved make uniformly arranged inside the box with suitable SMPS / LED drivers, wiring, connectors and electrical accessories to ensure uniform illumination without dark spots, including internal wiring, electrical connections, testing and commissioning. The item shall include complete artwork designing, fabrication, cutting, welding, grinding, finishing, ACP and acrylic fixing, vinyl sticker application, LED installation, electrical connections, transportation, loading, unloading, erection and installation at site, testing and commissioning, labour, tools and tackles and all incidental charges complete, excluding supporting columns / posts / structural supports, as directed by the Engineer-in-Charge.

Designing, manufacturing, supplying, delivering and fixing of MS framed Name Board of required size, fabricated using MS pipes / square hollow sections of suitable size not less than 40mm x 40mm x 2.6mm and thickness for the main frame, including providing and fixing MS angle sections not less than 32mm x 5mm at the rear side as necessary for stiffening and support, and fixing suitable gauge MS sheet 1.6mm over the frame by welding / riveting to form a rigid and uniform signage panel. The complete MS frame and sheet shall be thoroughly cleaned, free from rust, oil and loose material, followed by application of one coat of approved anti-corrosive metal primer and two coats of approved exterior grade synthetic enamel paint of make such as Asian Paints, Berger Paints, Nerolac or equivalent. The front face shall be provided with approved quality self-adhesive vinyl sticker of specified size, colour and design, including computer designing, cutting / printing of required letters, logos and graphics as approved by the Engineer-in-Charge, surface preparation, pasting and proper finishing without wrinkles or air bubbles. The item shall include fabrication, cutting, welding, grinding, painting, vinyl sticker application, transportation, loading, unloading, erection and fixing at site, labour, tools and tackles and all incidental charges complete, excluding supporting columns / posts, as directed by the Engineer-in-Charge.

Collection and supply of Red Earth from approved quarry including cost of material, conveyance to work spot and spreading the same irrespective thickness including all labour charges etc complete as directed by the site engineer.

Supply and transportation of 16 SqmmX 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-4.1.1-f S0R 26-27

Labour charges Layingof Cable including Earth work excavation of trench in hard ground soil, laying of U.G. cables upto 50 Sq.mm. on sand cushion covering the cable with bricks and back filling of trench including cost and conveyance of all materials and all labour charges etc. complete.as per Ele data 2026-27

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II Makes DURA LINE (Dura Guard)/Precision/CPE or its equivalent make including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-4.3.1 a of S0R 26-27

Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes : FP MCBmake :Legrand / Schnieder / L&T including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. of SSR 2022-23 ELEC-6.1.24 of S0R 2026-27

Supply of 6-32A SP MCB 10KA C/D Curve ISI Mark Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-2.10.1-a of S0R 2026-27

Supply of 63A Porcelain Rewirable Fuse Units Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal /GM/ Benlo /Anchor including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-2.7.1 of S0R 2026-27

Supply of 6-32A DP MCB 10KA C/D Curve ISI Mark Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-2.10.1-c of SSR 2022-23

Supply and delivery of MS Box with required size 3feetx x 2feet x 1feet deapth with suitable wooden plank including cost of materials, and all labour charges and conveyance to wroks spot etc.,complete.as directed by the departmental authorities.(LR)

Supply and delivery of 63A neutral link with aluminium busbar strip including necessary bolt and nut etc complete as directed by the departmental authorities.

Supply and Run of 4 of 10 Sq.mm WPSC Alluminium cable Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal /Sudhakar/ Rajnigandha/ Airson/Orbit/ollvin along with No. 10 SWG G.I. bearer wire through PVC cleats with all accessaries including labour charges etc. complete for service mains. as per Ele data of SSR 2022-23

Supply of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/ Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor /Million including cost of material and conveyacne to work spot etc complete as departmental authorities.ELEC-1.5.4-L of S0R 2026-27

Supply and delivery of heavy duty 63A RYB FP Connector with bolt and nuts etc complete as directed by the departmental authorities.

Supply and delivery Single phase electro mechanical analogue time switch ON /OFF (24hours) of approved make for out door lighting including costof material and conveyance to work spot etc complete as directed by the departmental authorities.

Labour charges 1) Skilled Electrician-1No and helper -1No 1) Fixing LED lights and cable terimation and necessary cable connection 2) load balancing of 3phases including testing and commissioing and handed over to departmental authorities.(1531.25x4-1job)

Repairing, servicing and restoring the existing MS Lighting Poles by replacement of defective LED luminaires, LED drivers, control gear, wiring, connectors and other electrical accessories wherever required, fabrication, cutting, welding, grinding shall further include thorough cleaning of the pole surface by scraping, removal of rust and loose paint, application of one coat of approved anti-corrosive metal primer and two coats of approved synthetic enamel paint of approved make such as Asian Paints, Berger Paints or Nerolac or equivalent. The work shall also include replacement/tightening of nuts, bolts and clamps, servicing of head frame, pulley arrangement and lowering/raising mechanism wherever required, testing, commissioning and trial run of the complete High Mast Lighting System to ensure satisfactory performance, including all materials, labour, fabrication charges, transportation, loading, unloading, tools and tackles, lifting arrangements, scaffolding, safety equipment and all incidental charges complete as directed by the Engineer-in-Charge.

Supply and fixing of 20W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics istribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete MAT03360 a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE / VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG 9

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484.

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing using 75% of naturally occurring Dust and 25% of course sand spreading in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing Flooring with Cement Concrete 1:6:10, using 40mm metal, 100mm thick and plastered over with 12 mm thick in CM(1:3) including seigniorage charges, etc., complete for finished item of work complete for finished item of work, including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) Without Form Work

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive streangth not lessthan 75 kg/sq.cm for walls for Superstructure Walls including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Supply, Delivery & Fixing of MS fabrication works., as directed by Engineer-in-charge of the work, the rate includes fabrication, transportation, erection & fixing at work site and painting with red oxide coat etc., and overheads & contractors profit complete for finished item of work .

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for New Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of 90mm dia PPR Stand Ball valve confirming to Din standards 8077/8092, including cost and conveyance of all materials to site, labour etc. complete for finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) For 11.20mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) For 28.60mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) For 34.90mm OD Pipe - SDR 13.5

Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia BMW -I.415

Repairing, servicing and restoring the existing MS gate to proper working condition, including removal and refixing wherever required, straightening of bent members, cutting, welding, fabrication, grinding, replacement of damaged hinges, rollers, locking arrangements, nuts, bolts, clamps and other minor hardware/accessories, rectification of damaged structural members and proper alignment and levelling of the gate. The work shall further include thorough surface preparation by scraping, wire brushing and emery rubbing, removal of rust, dirt, grease and loose/peeling paint, application of one coat of approved anti-corrosive metal primer and two coats of approved exterior grade synthetic enamel paint of approved make such as Asian Paints, Berger Paints, Nerolac or equivalent, including painting of all exposed MS surfaces and touch-up painting of repaired portions. The item shall include lubrication of hinges and moving parts, testing for smooth opening and closing, final adjustment and cleaning of the site, including all materials, labour, fabrication charges, transportation, loading, unloading, tools and tackles, lifting arrangements, scaffolding and all incidental charges complete as directed by the Engineer-in-Charge.

Removal, shifting, repairing, refurbishing, supplying incidental materials, reinstallation and commissioning of existing children's play equipment from the existing location to the allocated space within the park/site, including dismantling, transportation, alignment, levelling and fixing complete. The item shall include straightening of bent members, cutting, welding, grinding, replacement of damaged nuts, bolts, bearings, bushes, chains, hooks, clamps, fasteners and other minor accessories wherever required, excavation and fixing in PCC (1:2:4) concrete foundation of suitable size, curing and backfilling. The work shall further include surface preparation by scraping, wire brushing and emery rubbing, applying one coat of approved anti-corrosive metal primer and two coats of outdoor grade weather-resistant PU or synthetic enamel paint of approved make such as Asian Paints, Berger Paints, Nerolac or equivalent, including lubrication of moving parts, testing, safety inspection, cleaning of the site and handing over the equipment in complete working condition, including all labour, materials, transportation, tools and tackles, scaffolding and incidental charges complete as directed by the Engineer-in-Charge

Supply of and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH For CC for Park joinings

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH For Brick work damaged

Designing, manufacturing, supplying, delivering, installation and erection of internally illuminated Box Type Name Board of required size, fabricated using GI 1" diameter pipes / GI hollow sections of suitable gauge and thickness, forming a rigid box frame, including closing the rear, top, bottom and side faces with 4 mm thick Aluminium Composite Panel (ACP) sheet of approved make, properly fixed to the GI frame. The front face shall be provided with suitable thickness transparent / translucent acrylic sheet of approved colour and finish, over which approved grade self-adhesive vinyl / 3M retro-reflective or translucent vinyl film shall be pasted, with required letters, logo and designs computer-cut to the approved artwork, such that the letters / graphics are clearly highlighted when illuminated. The box shall be provided with suitable high-efficiency LED modules / LED strips of approved make uniformly arranged inside the box with suitable SMPS / LED drivers, wiring, connectors and electrical accessories to ensure uniform illumination without dark spots, including internal wiring, electrical connections, testing and commissioning. The item shall include complete artwork designing, fabrication, cutting, welding, grinding, finishing, ACP and acrylic fixing, vinyl sticker application, LED installation, electrical connections, transportation, loading, unloading, erection and installation at site, testing and commissioning, labour, tools and tackles and all incidental charges complete, excluding supporting columns / posts / structural supports, as directed by the Engineer-in-Charge.

Designing, manufacturing, supplying, delivering and fixing of MS framed Name Board of required size, fabricated using MS pipes / square hollow sections of suitable size not less than 40mm x 40mm x 2.6mm and thickness for the main frame, including providing and fixing MS angle sections not less than 32mm x 5mm at the rear side as necessary for stiffening and support, and fixing suitable gauge MS sheet 1.6mm over the frame by welding / riveting to form a rigid and uniform signage panel. The complete MS frame and sheet shall be thoroughly cleaned, free from rust, oil and loose material, followed by application of one coat of approved anti-corrosive metal primer and two coats of approved exterior grade synthetic enamel paint of make such as Asian Paints, Berger Paints, Nerolac or equivalent. The front face shall be provided with approved quality self-adhesive vinyl sticker of specified size, colour and design, including computer designing, cutting / printing of required letters, logos and graphics as approved by the Engineer-in-Charge, surface preparation, pasting and proper finishing without wrinkles or air bubbles. The item shall include fabrication, cutting, welding, grinding, painting, vinyl sticker application, transportation, loading, unloading, erection and fixing at site, labour, tools and tackles and all incidental charges complete, excluding supporting columns / posts, as directed by the Engineer-in-Charge.

Collection and supply of Red Earth from approved quarry including cost of material, conveyance to work spot and spreading the same irrespective thickness including all labour charges etc complete as directed by the site engineer.

Supply and transportation of 16 SqmmX 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-4.1.1-f S0R 26-27

Labour charges Layingof Cable including Earth work excavation of trench in hard ground soil, laying of U.G. cables upto 50 Sq.mm. on sand cushion covering the cable with bricks and back filling of trench including cost and conveyance of all materials and all labour charges etc. complete.as per Ele data 2026-27

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II Makes DURA LINE (Dura Guard)/Precision/CPE or its equivalent make including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-4.3.1 a of S0R 26-27

Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes : FP MCBmake :Legrand / Schnieder / L&T including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. of SSR 2022-23 ELEC-6.1.24 of S0R 2026-27

Supply of 6-32A SP MCB 10KA C/D Curve ISI Mark Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-2.10.1-a of S0R 2026-27

Supply of 63A Porcelain Rewirable Fuse Units Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal /GM/ Benlo /Anchor including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-2.7.1 of S0R 2026-27

Supply of 6-32A DP MCB 10KA C/D Curve ISI Mark Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-2.10.1-c of SSR 2022-23

Supply and delivery of MS Box with required size 3feetx x 2feet x 1feet deapth with suitable wooden plank including cost of materials, and all labour charges and conveyance to wroks spot etc.,complete.as directed by the departmental authorities.(LR)

Supply and delivery of 63A neutral link with aluminium busbar strip including necessary bolt and nut etc complete as directed by the departmental authorities.

Supply and Run of 4 of 10 Sq.mm WPSC Alluminium cable Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal /Sudhakar/ Rajnigandha/ Airson/Orbit/ollvin along with No. 10 SWG G.I. bearer wire through PVC cleats with all accessaries including labour charges etc. complete for service mains. as per Ele data of SSR 2022-23

Supply of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/ Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor /Million including cost of material and conveyacne to work spot etc complete as departmental authorities.ELEC-1.5.4-L of S0R 2026-27

Supply and delivery of heavy duty 63A RYB FP Connector with bolt and nuts etc complete as directed by the departmental authorities.

Supply and delivery Single phase electro mechanical analogue time switch ON /OFF (24hours) of approved make for out door lighting including costof material and conveyance to work spot etc complete as directed by the departmental authorities.

Labour charges 1) Skilled Electrician-1No and helper -1No 1) Fixing LED lights and cable terimation and necessary cable connection 2) load balancing of 3phases including testing and commissioing and handed over to departmental authorities.(1531.25x4-1job)

Repairing, servicing and restoring the existing MS Lighting Poles by replacement of defective LED luminaires, LED drivers, control gear, wiring, connectors and other electrical accessories wherever required, fabrication, cutting, welding, grinding shall further include thorough cleaning of the pole surface by scraping, removal of rust and loose paint, application of one coat of approved anti-corrosive metal primer and two coats of approved synthetic enamel paint of approved make such as Asian Paints, Berger Paints or Nerolac or equivalent. The work shall also include replacement/tightening of nuts, bolts and clamps, servicing of head frame, pulley arrangement and lowering/raising mechanism wherever required, testing, commissioning and trial run of the complete High Mast Lighting System to ensure satisfactory performance, including all materials, labour, fabrication charges, transportation, loading, unloading, tools and tackles, lifting arrangements, scaffolding, safety equipment and all incidental charges complete as directed by the Engineer-in-Charge.

Supply and fixing of 20W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics istribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete MAT03360 a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE / VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG 9

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

3) Provision for Seigniorage charges

4) DMF @30% on Seigniorage charges

5) MERIT @2% on Seigniorage charges

6) Consideration 100% on Seigniorage charges