Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC NEW HARIGAON BEHIND BASE HOSP PO NIKAMUL TEZPUR ASSAM 784001 | SONITPUR | ASSAM | 784001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹36.5 L+₹2.3 L (6.81%)Rejected-Finance | L2 | Rejected-Finance BecomeL2 | |
| 3 | L3₹39.4 L+₹5.1 L (15.0%)Rejected-Finance | L3 | Rejected-Finance BecomeL3 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur, Mission Charlia
WELCOME MAINT SERVICES TO MD ACCN AT ZONE-1 TO ZONE-4 AND REPAIR/REPLACEMENT OF JOINERY, ROOF AND CEILING AND MISC B/R WORK AT CERTAIN OTM BLDG ZONE-1 AND ZONE-1A UNDER GE (S) TEZPUR
2023_MES_590404_1
8745
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹80,000
Yes
5 Jul 2023
20 Apr 2023
25 May 2023
20 Apr 2023
22 May 2023
6 May 2023
21 Apr 2023 - 5 May 2023
Amount
Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts, complete all as specified and directed.
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and directed.
Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each, complete all as specified and directed.
Taking down of shutters of any description n.exc 1.00 Sqm and each, complete all as specified and directed.
Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and directed.
Refixing of shutters of any description n. exc 1.00 Sqm each in same opening including of taking down, easing, adjusting and refixing/renewal of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and directed.
S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhats , complete all as specified and directed.
Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in bed block or hold fast/coping all as specified and directed.
Supply and fix, 30 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed
Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth will be measured and paid separately).
Supply an fix,30mm thick, flush shutter, solid core construction, with particle board core and plywood face panels commercial type on both sides all as specified and directed.
S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supply and fixing in opening , complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement, supply and fixing at site , complete all as specified and directed.
S&F Anodized aluminum frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F Anodized aluminum window and ventilator shutters, sliding type without sash bar, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, etc, complete all as specified and directed.
Anodized aluminum door shutters, aluminum section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc, complete all as specified and directed.
S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labors articles n.exe 200 cum each , complete all as specified and directed.
S&F 50mm Butt hinges medium weight cold rolled mild steel , complete all as specified and directed.
S&F 100mm size type B-21 Butt hinges extruded aluminum alloy with galvanised MS sheet hinges pin anodized , complete all as specified and directed.
S&F Aluminum anodized barrel tower bolts of extruded section 200 mm long and fixed with screws , complete all as specified and directed.
S&F extruded aluminum alloy handels fabricated type, anodized, 150 mm long and fixed with screws , complete all as specified and directed.
S&F MS 250 mm ordinary pattern door spring including roller and roller plate for wooden/ steel frame , complete all as specified and directed.
S&F Aluminum anodized sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy, complete all as specified and directed.
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed.
S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed.
M&L for chequred cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed.
S& F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares, complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar , complete all as specified and directed.
M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strength not less than 75 kg/Sq cm all as specified and directed.
All as per item No 32 except bricks all as specified and directed
Material and labour for old size sub Class B bricks , straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strength not less than 75 kg/Sq cm all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level , complete all as specified and directed.
M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with bitumen and sand & ratio of 1:3 complete all as specified and as directed.
M & L for 40 mm PCC 1:2:4 ( 20 m graded stone aggregate) type 1as sub floor , sub base even and rough to receive the topping layer on roof /floor all as specified and directed
Demolition of reinforced cement conc of any description and in any position , complete all as specified and directed.
M&L for RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like , complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and directed.
S&F Formwork to soffits of suspended slabs such as cooking slab and similar work; exceeding 200mm thick (Horizontal or sloping) , complete all as specified and directed.
Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works , complete all as specified and directed.
S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete with glazing bars, done tailed or welded , complete all as specified and directed.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded , complete all as specified and directed.
Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed.
Taking down existing damaged water closet along with complete PCC from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasting of polythene film, 150 micron, natural colour with cold cut back adhesive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness. Complete all as specified and directed.
Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.
Supply and fix mild steel guard bars to window frame with necessary drilling holes etc including taking out old guard bars from old chowkats all as specified and directed.
Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water , complete all as specified and directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) in two layers 10 mm thick and 5 mm thick on fair face of brick or concrete surface finished even and smooth without using extra cement.complete all as specified and directed.
Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and smooth without using extra cement. complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished even and smooth without using extra cement.complete all as specified and directed.
M&L Applying two coats of acrylic emulsion distemper to newly plastered/previously untreated wall over a coat of 1 mm thick layer of wall care putty over a coat of primer by smart painting method including preparation of newly plastered wall all as specified and directed.
M&L Applying two coats of acrylic emulsion distemper by smart painting method to old plastered wall over a coat of 1 mm thick layer of wall care putty over a coat of primer including complete removal of existing treatment all as specified and directed.
M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L two coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surface of ceiling by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L Applying one coat of acrylic emulsion distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L Applying two coats of acrylic emulsion distemper by smart painting method to old plastered wall including complete removal of existing treatment all as specified and directed..
M&L for applying for preparation of old painted surfaces of wood and wood base surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for applying for preparation of old painted steel surfaces and iron surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of weather coat (Exterior emulsion) over a coat of 1 mm thick layer of putty to make surface smooth and one coat of damp shield primer by smart painting method .complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of exterior emulsion weather coat over a 1 mm thick layer of wall care putty to make surface smooth and one coat of damp shield primer by smart painting method .complete all as specified and directed.
M&L for cleaning of existing terrazzo flooring with machine cutting to make the existing floor surface smooth including filling of joints rough surface by using white cement and pigment if required to match the existing surface of floor complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm the cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed.
M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm the cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets , complete all as specified and directed.
S&F false ceiling with powder coated exposed G.I. grid suspension system Everest E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner (3600 mm long, 0.25 mm thick, 38mm height) Cross Tee (1200mm/600mm long, 0.25 mm thick, 27 mm height) and Wall Angle (3000 mm long, 0.4 mm thick, 22 mm height). The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board or equivalent quality having Density>1200 Kg/m3, size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling, complete all as specified and directed.
Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for riveted in forged into spikes, framed guard bars, railing and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
M&L Verified Ceramic tiles 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 , complete all as specified and directed.
All as per item No 71 above but in skirting over 10mm thick screening in cement mortar 1:3 , complete all as specified and directed.
Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4, complete all as specified and directed.
S&F Coloured Glazed ceramic tiles 450 x 350 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screening in Cement mortar 1:3 , complete all as specified and directed.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.
S& F for laying 15mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls/ceilings or laid in floors including taking down all complete all as specified and directed
S&F for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down all as specified and directed.
S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 KG/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down all as specified and directed.
S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 KG/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down all as specified and directed.
Supply only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix, as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix, as in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix, as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.
Supply and fix, waste coupling CP 32/40mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.
Supply & fix as in repair stainless steel curtain rod of dia 38 mm with fixing brackets,etc. with two Nos of end knob complete for doors/window opening all as specified and directed
Material and labour, as in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed
Supply & fix in repair 20 mm dia anodized aluminum alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for applying for preparation of old painted surfaces steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specified and directed.
M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.
Supply and fix, as in repairs, sheet glass shelf/corner shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.
Supply and fix, as in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix, as in repair, 10 ltrs capacity PVC valve less symphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.
Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing contriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section in any position in framed work, complete all as specified and directed.
M&L 2nd class Hard Wood in scantling fixed clean swan in framed work , complete all as specified and directed.
Dismantling timber scantling under 40 Sqcm in section In fillests, rails , posts, rafters and purlins etc in any position in framed work or unframed work , complete all as specified and directed.
M&L 2nd CL Hard Wood plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil , complete all as specified and directed.
S&F 2nd class hard wood plain, solid, straight in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement, complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.
Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches , complete all as specified and directed.
Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.
Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in tranches or floor all as specified and directed.
S&F for PVC (SWR) with access door bend 110mm dia, complete all as specified and directed.
S&F for PVC (SWR) with access door bend 75 mm dia, complete all as specified and directed.
S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore, complete all as specified and directed.
S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore, complete all as specified and directed.
S&F in repair tubular Towel rail chromium plated 600mm to 750mm long 20mm dia D type complete all as specified and as directed.
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent , complete all as specified and directed.
Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.
M&L Prelaminated particle board 12 the, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S & F 100 mm long hasp and staple aluminum anodized wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.
S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.
S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.
Supply and fix, as in repair, bib tap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.
Supply and fix, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed.
Supply & Fix as in repair CP shower rose 125 mm with revolving joints and fixed to GI pipe or union all as directed.
Taking down existing aluminum shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after repairing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed.
S & F in repairs Aluminum (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight between 61 to 80 kg complete all as specified and directed
S & F in repairs aluminum mortise lock vertical type 75 mm 4 levers all as specified and directed
S & F in repairs floor door stopper aluminum alloy body overall length 140 mm and tonge , anodized with hard drwansteel spring all as specified and directed.
S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.
Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed
M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm.all as specified and directed
Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyester fabric weight not less than 150gms per Sqm. The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminum paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capacity on same place with all required necessary fittings complete all as specified and as directed.
Demolition of cement concrete unreinforced of any description and in any position, not otherwise specifically provided for and M & L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregates for , in roof Kerbs,rounded or chamfered or haunching in chajjas, benching, filleting, slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platform for tanks wherever required as directed.
M&L for water proofing treatment of External walls DFT: 110 microns by applying two coats of elastomeric coating Raincoat, material covering capacity 3 Sqm per litre in 2 Coats without dilution & 1 coat of efflorescent resistant primer 10sqm/litre/coat after cleaning the surface thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturers , complete all as specified and directed. Make :- Raincoat shall be of PlDlLlTE or equivalent make.
Cleaning the surfaces of existing RCC Slab with wire brush and M&L for application of one coat of CORE COAT LP (F) minimum 1mm thick (12 to 14Sqm per coat for 1mm thick coat per pack) or equivalent approved in PIDILITE and grouting with a coat of neat cement slurry using 2.70 Kg /Sqm of cement admixed with liquid water proofing admixture and one coat of SBR cement, complete all as specified and directed. Make :- Core coat shall be of Build core Chemical /or equivalent approved product of PIDILITE.
Cleaning the surfaces of existing RCC Slab with wire brush and M&L for application of 2 coats of Fast flex, minimum 1mm thick (1.5Kg/sqm) or equivalent approved in PlDlLlTE and grouting with cement slurry using expansive additive Pedigree AM, @ 225gm/bag of cement and one coat of SBR latex , complete all as specified and directed.Make :- PIDILITE or equivalent
M&L for treating the dampness of wall with Silicon ate injection grout (The spacing of holes shall be 2 Nos holes in every 1m) by making 12mm to 15mm holes at an inclination of 455 degrees to the extent of 112 to 3/4 of the wall thickness and inject the diluted chemical liquid (1 :4) (Min 10 Ltrs), in the lowest possible point by using a pressure grouting machine with a pressure of approximately 3 Kg/sqcm' till the point of return of liquid and seal the treated holes with suitable compound and washed thoroughly the treated areas with water , complete all as specified and directed.
S & F in repairs wall mixer 3-in-1 CP 15 mm bore including 125 mm dia overhead shower, complete with 15 mm long bend pipe and wall flange including making good wall surface complete all as specified and directed
S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed.
S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position , complete all as specified and directed.
S& F in repair of Towel Ring of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed.
S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws, complete all as specified and directed.
Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern ) but including seat cover white closed type and flush pipe complete all as specified and directed
Supply and fix, as in repairs, plastic water closet seat, closed pattern with flat bottom, and cover for water closet pan (pedestal pattern) all as specified and directed.
Supply & Fix as in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 900mm X 850mm X 250mm with three shelf complete all as specified and directed.
M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enameled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings (both) and new capacitor complete all as specified and directed
Supply and Fix louver shutter (with Mosquito net made out Aluminum wire cloth 0.36 mm nominal dia ) made out GI sheet for Exhaust fan 300/400 mm sweep including proper fixing with screw in wall at existing Hole including taking down old unsv louver shutter complete all as specified and directed.
S & F Capacitor( 2.5-4) MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep including taking down old unsv capacitor , complete all as specified and directed. Make- Havells/Usha/Tipton/Universal
S & F Down rod 15mm bore medium grade GI pipe including cut in required length and drilled as per existing size including taking down old unsv down rod complete all as specified and directed.
S & F Fan blade for Ceiling fan of 1200mm sweep of white colour including taking down old unsv fan blade complete all as specified and directed.
S & F in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed.
All as Per Item No-149 , but for DB 6 way.
S & F in repair MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed .
S & F in repair MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed .
S & F in repair MCB DP 40-63 Amps, B series, 230 Volts complete all as specified and directed.
Taking down the existing U S wiring carefully of aluminum/copper point wiring (light, fan, bell, socket, power point etc.) with conduit/casing caping, along with all connected accessories etc complete all as directed.
M&L for point wiring complete for One light point with 1.5 Sqmm single core multistandard copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through PVC casing caping including provn of 1.5 sqmm single core multistandard copper conductor FR PVC insulated and unsheathed as earth wire continuity including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed.
All as per Item No 155 above but for one fan / Exhaust fan point
All as per Item No 155 above but for One 3 pin 5 Amp socket outlet on the same board
All as per Item No 155 above but for One 3 pin 5 Amps socket out let on independent board
All as per Item No 155 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.
All as per Item No 155 above but for one bell point controlled by one 5 amp switch
All as per Item No 155 above but for one light point controlled by two way switches
S & F in repair electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan , complete all as specified and directed.
S&F in repair switch piano type, 5 Amp. SP, one way , complete all as specified and directed.
S&F in repair switch piano type, 15 Amp. SP, one way , complete all as specified and directed.
S&F in repair socket outlet, 2 in one 5 pin, 5 Amp, piano type , complete all as specified and directed.
S&F in repair socket outlet, 2 in 1, 3 pin 5 and 15 Amp flush type universal , complete all as specified and directed.
S&F in repair switch bell push, flush type, 5 Amp , complete all as specified and directed.
S&F in repair bell, AC, 230 V, SP, ding dong type , complete all as specified and directed.
S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body , complete all as specified and directed.
S&F in repair switch two way switch flush type, 5 Amp , complete all as specified and directed.
M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.
M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.
M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 105 mm and 50 mm deep complete all as specified and directed.
M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and directed.
M&L in repair laminated sheet or hylam sheet for mounting, switches, sockets, fan regulator etc. of any size as per site requirement complete all as specified and directed.
S & in repair PVC casing caping of any size complete all as specified and directed.
M & L for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistandard 1100 volts grade, ISI marking drawn through and existing/new non metallic concealed PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, including one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) all as specified and directed Note - The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes, laminated hylem sheet if required shall be deemed to be included in the unit rate, complete all as specified and directed.
All as per Item No 177 above but for one fan / Exhaust fan point
All as per Item No 177 above but for One 3 pin 5 Amp socket outlet on the same board
All as per Item No 177 above but for One 3 pin 5 Amps socket out let on independent board
All as per Item No 177 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.
All as per Item No 177 above but for one bell point controlled by one, one 5 amp switch
S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module , complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module , complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair modular switch, 16 Amp flush type 1 module , complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair modular socket outlet, 3 pin, 6/16 Amp flush type 2 module , complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair modular bell push, flush type, 5 Amp,1 module , complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair modular Fan Regulator step type 2 module ,120W , complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG
Taking down old unsv sub main wiring of any size complete all as specified and directed
M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed conduit and all accessories, including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.
All as in Item No-190 above but for 2 x 6.0 sqmm + 1 x 6.0 sqmm earth wire
S & F in repair 9 Watt LED fitting, B22 base, 3 star, colour temp 6500k, including taking down old unserviceable type bulb , complete all as specified and directed. make-Havells /Phillips/Bajaj
S & F in repair angle bulb holder for LED fitting, B22 base, including taking down old unserviceable type holder, complete all as specified and directed.
Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting, complete all as specified and directed. Make Havells,Cat No-LHEXACP7IN1W010 or equivalent make of Philips/Bajaj/CG/Surya .
All as Per Item No- 195 , but for 20W 4 ft.Make Havells,Cat No-LHEXAWP7IN1W020 or equivalent make of Philips/Bajaj/CG/Surya
S & F in repair 10 Watt LED panel fitting surface mounted including surface accessories , colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light including taking down old unserviceable type down lighter all as specified and directed. make-Havells/Phillips/Bajaj
M & L Earthling complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire of dia 4 mm as earthling conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations , complete all as specified and directed. Note: 1.The above quoted rate shall include cost of main earthling lead of 32 x 6mm GI earth strip, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthling with all its accessories is deemed to be included in the unit price.
S & F in repair connection pipe (both hot & cold) of any size as per site requirement for geyser of any capacity complete all as specified and directed. Note- Both hot and cold pipes are deemed to be one unit, complete all as specified and directed.
S &F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and directed
Supply and fix in repair Heating element of 1500/2000 watts suitable for 25 ltrs capacity water heater including taking down old unsv element complete all as specified and directed.
S & F in repair Thermostat of range 0-80 degree Celsius suitable for 25 Ltrs water heater including taking down old unsv thermostat complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
M/S RHINOTECH BUILDERS
Chinmay Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .