SPECIAL REPAIRS TO BLDG NO P-47 (1 TO 8) OF OTHER RANK MARRIED ACCOMMONDATION AT 20 CAMP THE SRC ,SPL REPAIR TO BLDG NO T-20 (SURG WARD) AT MH, SPL REP TO BATHROOMS AND TOILETS AT OTM ACCN BLDG NO P-420,P-421 AND P-422 AT PRC, SPL REP IN OR MD ACCN B

Amount

Taking down complete existing treatment of roof/ parapet , Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc complete all as specified and directed.

M&L for brushing neat cement slurry (3 Kg of cement per Sq M) mixed with water proofing liquid in the proportion,water proofing liquid, water & cement (1:4:7) or as per manufacture instructions for bonding of old concrete surface to new concrete all as specified & directed .

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral waterproofing chemical compound @ 200 millilitre per 50 Kg cement or as per manufacture instructions as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete.all as specified & directed .

M & L cutting 75 mm wide and 65 mm deep in brick wall / PCC block / RCC surface any location shaping horizontal face grooves filled with PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate with and including water proofing chemical compound @ 200 millilitre per 50 Kg cement or as per manufacture instructions, laid when concrete is green complete all as specified and as directed.

M&Lfor rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction, finished the surface even and smooth without using extra cement over roof / sunken slab /wall complete all as specified and directed NOTE : water proofing liquid shall be measured and paid seperately .

M&L for Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete (i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps. (iii) Applying two cots of bituminous based aluminium paint @ 0.3 kg/Sqm complete all as specified and as directed.

M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Priming plastered surface of roof by applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface till the surface is properly impregnated. (b) Applying APP based polymeric membrane 3mm thick and weight should not less than 3 kg/sqm and sealed the joint with torch application. (c) Applying a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 Kg/ Sqm.

M&L for cement concrete tiles with grey cement and no pigment 25cm x 25 cm x 22mm thick , laid over and including 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry over roof complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm in sunken portion including cleaning of surfaces complete all as specified and directed.

S&F 50mm bore tubes light grade galvanised with all fittings as in spout pipe, etc complete all as specified .

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 sqm each with shutter without taking of shutter from framed complete incl removing from site

Taking down shutters of any description exc 1 sqm and n. exc 2 sq m each and removing from site

Dismantling of boarding of any description, fixed in any position with screws complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F pressed steel frames for doors of size (105x60) mm made of 1.25mm thick mild steel sheet for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., cwith and including PCC(1:3:6) type B0 using 12.5 mm graded stone aggregate filling in hollow portion of frame complete all as specifid and as directed.

M&L Pressed steel frames for doors size 125x60mm made of 1.25mm thick mild steel sheet for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc., with and including PCC(1:3:6) type B0 using 12.5 mm graded stone aggregate filling in hollow portion of frame complete all as specifid and as directed.ied and fixed

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed all as specifed and directed.

S&F 32mm thick flush shutter solid core construction with block board core and ply wood face pannels, commercial type on both side complete all as spd and directed .

S&F 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F steel windows with side hung shutters incl box type hinges with frame, steel handle, complete with glazing bars, dove tailed or welded complete all as specified and directed

S&F steel windows with side hung shutters incl box type hinges with frame, steel handle, complete without glazing bars, dove tailed or welded complete all as specified and directed

S&F steel window, ventilators, fixed type, with glazing bars welded as per IS.1038:1983 (Amendment No.3 of May 2009) complete all as specified and as directed.

M&L for mild steel Bands, straps, supports or stays for rainwater , fan clamps Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and pintol hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gd E-165 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 18/19mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete all as specified and directed.

S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete all as specified and directed.

S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel with brass polish , bright finish complete all as specified and directed

S&F Ball catcher with 8mm dia steel ball and brass body and striking plate incl letting and fixed complete all as specified and directed

S&F for steel wire cloth 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and directed

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane complete all as specified.

S&F 125 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as directed

S&F butt hinges 75mm long medium weight cold rolled MS and fixed complete all as directed

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as directed

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as directed

S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as directed

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long. all as specified

S&F 200mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and direcetd

S&F 150mm long overall length of cover plate floor door stopper of aluminium alloy body anf tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed

M & L for cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

S & F mild steel curtains rod of PVC coated 20 mm dia fancy type with fixing on bracket etc complete all as spd and directed

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design all as spd and directed.

Dismantling old brocken floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premices complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick, laid over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&Lfor machine cut kota stone slab flooring 40-50mm thick over & including 20mm screed base in CM 1: 4 as in step tread in one piece in one step, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 16-18mm thick white Marble stone flooring as in border, etc at kota stone flooring over & including 20mm screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut Kota stone 18-20 mm thick in riser of steps,skirting over & including 15mm thick cement plaster in cm (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in, skirting, dado, etc incl 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 and the same shall deemed to be included in the quoted rate.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment, laid over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for Cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) complete all as directed

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

Demolition of RCC in Roofs, floors ( other than ground floors), beams, staircases, landing, chajjas precast cover chulha hoods and similar suspended work ( reinforced) complete all as specified , reinforced cut to facilitate demolition.

M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in cover slab, shelves Chhajja and similar work set in CM (1:4).complete all as specified and directed

M & L for mild steel TMT bars 8 to10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for machine cut cudappah stone slab 20-25 mm thick, laid over & including 15 mm thick cement screed bed in CM 1:4 laid & jointed with gray cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for rounding of edges of kota/cudappa stone slabs one edge , such as in steps, cooking plateform, and other similar situation complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 25 mm bore all as specified.

S&F15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

S&F 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

S&F 25 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Refixing old galvanised steel tubes & connections on wall 15 mm bore including new fittings complete all as specified and directed .

Refixing old galvanised steel tubes & connections on wall 20 mm bore including new fittings complete all as specified and directed .

Refixing old galvanised steel tubes & connections on wall 25 mm bore including new fittings complete all as specified and directed .

S&F 500 ltr capacity rotational moulded polyethylene water storage tank double (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

S & F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

S&F in repair 15mm dia angle stop valves cast copper alloy fancy type, chromium plated complete all as specified and directed

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S & F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed

S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed

S&F in repair vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as specified and directed

S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as directed at site.

S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

Supply and fix shelf 450mm long of PTMT fixed with and incl chromium plated brass screws and wooden /plastic cleats (minimum weight 300 grams)complete all as specified and directed

S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm baw/size 410 mm x 330 mm x 160 m and including 38/40mm dia waiste pipe complete all as specified and directed

S&F stainless steel uternsil rack of size 24" X 36" X10" of approved quility and fixed in kitchen as directed by Engr-in-Charge.

S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M &L for brickwork with sub-class 'B' old size bricks, straright or corved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

All as per item No 95 here in before but except bricks, using old serviceable brick as retrieved.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and fair without using extra cement.complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) mixed with liquid water proofing compound as per manufacturere's instructions, on wall, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately)

M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and direct.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed.

S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed.

S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.

S&F 110 mm bore PVC (SWR) vent cowl all as specified and directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement all as specified and directed

S&F 110mm dia PVC (SWR)WC connector with lip ring all as specified & directed.

M&L for applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed

M&L for applying one coat of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed

M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified and directed

M&L for applying three coats of white wash on newly plastered surfaces on wall after necessary preparation of the surface, complete all as specified and directed.

M & L for applying three coats of white wash on newly plastered surfaces of ceilings after necessary preparation of the surface, complete all as specified and directed.

M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash to ceiling complete all as specified and directed

M&L for preparation of new plastered wall surface and applying two coat of wall care putty to make the entire surface free from undulations all as specified.

M&L for preparing the old surfaces by complete removal of existing treatment and applying two coat of wall care putty on surface to receive, finishes including complete all as specified and directed

M & L two coats of oil bound distemper on newly prepared puttied surfaces Complete all as specified and directed

M&L for preparing the old surfaces by complete removel of existing treatment and applying two coat of cement based paint on walls all as specified .

Supply only liquid water proofing compound complete all as specified and directed at site.

Dismantling Asbestos Cement (corrugated, semicorrugatedetc) sheets in roof covering.

Dismantling of wooden scantling , purlings , rafter etc 40sqm and over in section fixed in any position as in framed work complete all as specified and as directed.

Dismantling of wooden scantling under 40sqm and over in section fixed in any position as in framed work complete all as specified and as directed.

M&L for second class hard wood in scantling clean sawn complete all as specified and directed.

M&L for mild steel work Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410-W (grade E-250)

M&L, Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm long dia of bolt exc 12mm not exc 20mm complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in redge, fixed with self tapping screws as specified

M&L for rendering 15mm thick on brick or concrete surface in Cement mortar (1:4) finishing external surface even and smooth w/o using extra Cement complete all as directed and specified.

Preparation of new plastered surfaces of walls using sand paper and applying two coats of cement base paint over a coat of cement base primer complete all as specified and as directed.

M&L, for preparation of old decorated surfaces on walls including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of cement base paint complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered surface and applying one coat of distemper oil emulsion on old decorated surface of wall complete all as specified and directe.

Material and labour for 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate. as in floor and finished even and smooth w/o using extra cement complete all as specified.

Material and labour for vitrified coloured ceramic tiles 10 mm thick ,first quality (sqaure/rectangular )area of each tile exe.0.18 sqm but n.exe.0.38 sqm , in floors jointfree tiles etc set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces complete all as specified and directed.

Description all as per item No 138 here in above but on vertical surface such as skirting/ risers etc

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 , complete all as specified and directed

M&L for 10mm thick bedding layers in cement mortar 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of paver tiles.

M& L for brick work with sub class 'B' bricks straight or curved on plan to any radiusin half brick thick wall built in cement mortar 1:4, complete all as specified and directed

S&F 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to received glass gauze etc. with sash bars, edges of framing plain for securing glass etc. (without sash bars)edges of framing plain , fitted to chawkhats complete all as spd and directed by Engr-In-Charge .

S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, window and ventilator shutters , fixed / sliding track two or three track including frames ,glazing clips , cleats side hung type without sash bars, fixed window, ventilators etc with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F Anodised aluminium sliding door shutter powder coated (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium snap beading, screws , top rail , guid rail etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron) sliding , side haunge type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such locking arrangement complete all as specified

S&F for 5.5 mm thick plain tinted galss area exc 0.50 sqm each pane fixed in alu frame as in door/window/partitions/ventilators complete all as specified and directed.

S&F for 4 mm thick plain tinted galss area n.exc 0.50 sqm each pane fixed in alu frame as in door/window/partitions/ventilators complete all as specified and directed.

S&F for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated both sides with decorative choice lamination fixed in aluminum shutter/partition complete all as specified and directed.

S&F Anodised aluminium DECO Grill 10 mm thick (DG-104) fixed with U - alluminum Chanel with screws in window, ventilator , wall screws, anodised aluminium fittings such locking arrangement complete all as specified

S&F alluminum wire cloth XPM type, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with alluminum wire staples complete all as specified and directed

M&l for 50 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate as in floor and finished even and smooth w/o using extra cement complete all as specified.

S & F brass CP bracket fancy type suitable for fixing to 25mm dia curtain rod complete all as spd and directed by Engr-In- Charge

S&F Stainles steel tubing of 19/20 mm bore, 1.00mm wall thickness as in curtain rod complete including fixing brackets, stops etc. all as specified & directed. (For the purpose of measurement and payment running length of curtain rod only shall be considered).

S & F alluminum alloy butt hinges with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed

M&L for aluminium 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as specified and directed.

Dismantling wall and ceiling boarding of any descripion , thickness incl. cover fillets.complete all as specified and directed.

M&Lfor GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with ,GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre

M&L for Seamless calcium silicate ceiling made out of 1800 x 1200mm x 12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately)

M& L for hanger of 4mm dia. G.I. (up to 1200 mm length) adjusting level fixed to roof slabs by mean of ceiling cleats made out of GI flats 40X3mm size 60 mm long and expantion hold fasteners12.5 dia 40 mm long complete all as specified.

Material and labour for preparation of new surfaces of ceiling and applying two coats of OBD oil emulsion over two coats of wall care putty complete all as specified & directed.

Dismantling PVC water tanks 500 ltrs cap and removing to store or removing from site .

S&F in repairs Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 20mm fixed complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including seat and cover for pedestal pan complete all as specified and directed.

M&L for Granite slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types etc

S&F Vitreous china wash hand basin star white oval type 560 x 410mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, fixed on RCC slab and making good disturbed surfaces in CM 1:3 complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 110 mm bore branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) 75 mm bore branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction double, (double T), equal or unequal complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction double, (double T), equal or unequal complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of paver tiles.complete all as specified and directed.

M&L for Virified paver tiles any shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete all as specified and directed

M/L 35 mm thick Plain framed, paneled shutter with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1), complete as directed.

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded complete

All as per item No 178 here-in-before but without glazing bars complete

S & F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6 metres radius with old size bricks built in cement mortar (1:4)

M&L Cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in sub base, filling of Sunken floor etc complete

M&L for RCC as in kitchen platform, shelves, cover slab type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed .

Disconnecting existing tanks of capacity exc 500 & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and spd.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with CI 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type) of size 465x355x265mm, complete including providing and fixing plugs,waste coupling, waste pipe, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete.

S&F 100mm bore sand Cast iron soil pipe , waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete.

Description all as per item No 196 above, but fixed to walls

S&F 75mm bore sand Cast iron soil pipe , waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete.

Description all as per item No 199 above, but fixed to walls

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete.

S&F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete.

S&F in repair 75mm dia Cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

S&F in repair 100mm dia Cast iron vent cowl complete.

S&F CP Peg set of Three Peg complete all as specified and directed by EIC

S&F in repair Grating doom type 100mm dia of PTMT (Min wt 25gms)

M&L two coat of white wash on old plastered or un plastered surfaces on walls including necessary preparation etc complete all as specified and directed.

M & L preparation of old steel surfaces any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete.

Repair to pot holes any depth, n.exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road path etc cutting around edge to at least 25 mm in depth, making good by filling in screened & graded road metal, watering, well ramming, compacted and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed.

M&L of preparation of existing black top surfaces by wire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and applying a priming coat of bitumen primer @5 kg/10 sqm of VG-10 grade bitumen

M&L for Bituminous premix aphaltic semi-dense concrete 30mm thick consolidated thickness with 5.5% binder content(VG 30) by weight of total mix rolled and compacted to required camber and gradient, complete all as specified and directed.

M&L for premix bitumenous mecadam laid/rolled and compacted to required gradient and camber (Consilidated thickness 75mm or less)

M&L for road marking paint with hot applied thermoplastic paint 2mm thick having clear and sharp edges over road surfaces including straighting portion, curve etc in any situation. The therrmoplastic material shall be homogeneously composed of aggregate pigment resin and glass reflector rizing beads in equal percentage as specified. The work include for cleaning of road surface, heating the paints within temperature limits as specified by the manufacturer making proper arrangement for traffic during operation etc conforming to specification.

S & F road stud ABS body plastc reflector (cat eye) of size 100mm x 100 mm dynamically designed very high impact strength & fitted with 3 panels of glass beads containing 7 highly reflective glass beads and reflector element on two sides fixed ovre road surface and complete as directed.Make-3M/Dark Eye

Removing excavated/demolised material, soil, n. exc 150m and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified.

M&L for Cement Concrete nominal Mix PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in road/pavements finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Forming contraction/dummy joints of 65 mm x 10mm wide primed & filled with sealing compound of bitumen (VG-10) & sand 1:3 mix, complete all as specified and directed by Engr-in-Charge.

S & F in repair harrison rails, mild steel,chromium plated with fixing in bracket etc complete all as spd

Taking down carefully any type of point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendent, regulator, socket and brackets switch fuse etc removing materials from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed .

M & L for point wiring for one light/ fan point controlled by one switch with 1100 volt grade PVC FRLS insulated-unsheathed 1.5 Sq mm multi stranded copper conductor cable with continuous PVC FRLS insulated-unsheathed earth wire of 1.5 Sq mm multi stranded copper conductor cable drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover sheet for housing/fixing switches etc complete all as specified and directed.

All as per item No 220 above but 1.5 Sq mm for 5 Amp socket outlet on same board with 1.5 Sq mm earth wire complete.

All as per item No 220 above but 1.5 Sq mm for 5 Amp socket Switch socket combination on independent board with 1.5 Sq mm earth wire complete.

All as per item No 220 above but wiring with 2.5 Sqmm for 15 Amp Switch Socket combination on independent board with 2.5 Sqmm earth wire complete.

M & L Sub main wiring two single core 6.0 Sqmm PVC insulated unsheathed FRLS multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLS multistanderd copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia in ncluding taking down of existing conduit or batten complete and making good disturbed surface complete all as specified and as directed. Note :- Two run of cable and one run of earth cable and PVC conduit shall be measured as one length.

S& F switch piano type 5 Amp 230 volt one way flush type complete all as specified and as directed.

Supply and fix ceiling rose 3 terminals PVC/ Polycarbonate, isolated body complete all as specified and as directed.

S&F socket outlet 3/5pin 5 Amp flush type 230 volt complete all as specified and as directed.

S&F socket combination 2 in 1, 5 pin 5 Amp flush type universal 230 volt complete all as specified and as directed.

S&F switch socket combination 2 in 1, 6 pin 5 Amp and 15 Amp flush type universal complete all as specified and as directed.

S&F angle holder complete all as specified and as directed.

S&F Led bulb 9W complete all as specified and as directed.

S&F Fan regulator electronic type 5 step, 230 volt complete all as specified and directed.

S&F call bell Ding dong, AC 230 volts, single pole complete all as specified and as directed.

S&F bell push flush type 5 amp AC 230 volts, single pole complete all as specified and as directed.

Supply & fix retro type tube light along with fixture,18W complete all as specified & as directed.

Supply & fix retro type bulk head ,10 W complete all as specified & as directed.

S&F in repair sheet metal enclosures for DBs single pole & neutral 08 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

S&F in repair sheet metal enclosures for DBs single pole & neutral 12 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

S&F in repair MCB single pole 6 to 32 Amp 240 V, ‘B’ Series, 10 KA, complete all as specified and as directed.

S&F in repair MCB DP 40 Amp 240V, ‘B’ Series, 10 KA complete all as specified and as directed.

S&F in repair MCB 63Amp FP, 240V, ‘B’ Series, 10 KA complete all as specified and as directed.

S&F LED bulb light batten suitale for LED T-8 lamps cat part No-DMLN1T8-16 pre-wired with LED tube rod 16 W cat part No-LTT8-16 with extruded aluminuum body PC diffuser and inbuilt driver of crompton greaves or equivalent model of philips/wipro/GE including electricl connection from ceiling rose to light fitting by PVC flexible wire 23/.0076 mm size including earth connection.

S&F LED floodlight up to pressure die cast aluminium housing with touhened glass and high power LEDs and secondary lenses with IP66 protection. Option for 3000K 10 KV SPD included Make -Crompton (Cat part No LFL-50-CDL/60-M) including electrical connection from ceiling rose to light fittng by PVC flexible wire 23/.0076 mm size including earth connection and all as specified as directed.

S&F sheet metal enclosures for DBs single poke and neutral 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connecti through suitable lugs by crimping and making good distrubed area of wall completed all as specified and as directed.

S&F sheet metal enclosures for DBs TPN 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified and as directed.

Supply and fix 4 pole MCCB 32 Amp 50 Hz, 415 V with rupturing capacity 25 KA alongwith MCCB enclosure complete all as specified and as directed.

S&F 1100 Volt grade heavy duty cable PVC insulated alumunium conductor served with inner sheathing of PVC tape and hangers not more than 1 mtr apart including 4mm suspension wire two single core cable,single core multistranded 6 sqm alumunium conductor all as specified and directed.

S&F MCB SPN, 20A 240V, "B" series, 10 KA complete all as specified and as directed.

M&L for cable XLPE insulated screened PVC bedded, Galavanised steel strip or wire armoured, eletric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16sqmn 4 core complete all as specified and as directed.

M & L for tubes GI Light grade laid in trenches / floors / on pole / on road for cable protection with all fittings of size 40mmm 4 core complete all as specified and as directed

Removing excavated/demolised material, soil, n. exc 50m and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified.

Material and labour for sand cushioning for protection of under ground cable, consolidated and compacted with clean dry sand all as specified and as directed .(Note : The depth of sand shall be measured after punning only)

Material and labour for supplying and laying reinforced pre case concrete cable cover class LV, Type-1, flate, size 250mm X150mm X 40 mm complete all as specified and as directed.

S&F Metering panel suitable for operation on 03 phase and neutral , 415 v, 50 Hz AC system (04Nos Energy Meteres) including 63 Amp MCCB with testing and refixing of old meter complete all as specified and as directed.

Excavation in trenches not exceeding 0.50 mtr wide and not exceeding 0.45 mtr in depth for cable trencehs and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in trenches including spreading, leaveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter ground level connected to galvanized iron earth lead wire 4 mm dia by means of bolts checks but and washers made of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I (2009) connected to earth dolly of main DB/main switch all as specified directed including construction of earth camber with PCC (1:3:6) type causing stone aggregate with pre cast RCC cover slab of size 54 cm x 54 cm x 5 cm thick (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8 mm dia deformed bars ,150 mm spacing both way and one No. handle with 10 mm dia MS rod for lifting cut to required length bent to shape and size as directed 20 mm bore GI watering pipe (medium grade) and earth protected by galvanized iron pipe 15 mm bore (light grade) and earth wire mess funnel charcoal and slat in alternate layers including necessary excavation and earth work in soft / loose any type of soil and dismantling of the existing rusted / deteriorated one complete all as specified. Note:- Earth wire up to 7.5 meter connected to earth point shall be deemed to be included in unit rate.

M/s Deepak kumar sinha

M/S ABHAY KUMAR AND BROTHERS