PERIODICAL SERVICES OF MT AREA SHIVALIK CLASS ROOMS SWIMMING POOL AND MA BN BOUNDRY WALL AND CERTAIN REPAIRS IN SOUTH COMPLEX UNDER AGE BR I AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of brick work/stone masonary built in cement mortar complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed Note:-work to be carried upto a height of 10.50m)

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed including dismantling existing wooden scantling/frame work.

Sandwitched PVC wall lining 5 mm thick wood grain printed coloured PVC sheet inclusive of PVC beads and angles at corners /edges and fixing at site with nails fixed in repair complete all as specified and directed.

Sand witched 5mm thick PVC sheet any colour/print in ceiling fixed to MS or timber frame work with nail or screws complete all as specified & directed. Note: Frame work shall be measured & paid under relevant item.

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

6mm thick Cement corrugated or semi corrugated sheets in roof fixed with ' L' type or ' J ' type hooks or cranked bolts and nuts complete all as specified and directed including dismantling existing sheet.

2.00 mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J or L hook and washer in roof, wall etc. complete all as specified and directed including dismantling existing sheet

6 mm thick AC serrated ridge for corrugated or semi corrugated sheets fixed with L or J Hook complete all as specified and directed including dismantling existing ridge

MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

PCC 1;4;8 type D-2, using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises all as directed.

Vitrified ceramic tiles planks size 195x1200mm wooden colour (dark shade) 9-10 mm thick polished, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete and dismantling of existing floor tiling/stone including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed.

Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 455 gms fixed in repair complete all as directed.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

Plastic water closet seat cover, white, closed pattern with flat bottom cover and mild steel chromium plated or aluminised hinging device fixed in repair complete all as specified and directed.

PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as specified and directed

PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed

Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No.SQT-526KN or equivalent of Make cera/Hindware

15mm dia pillar cock Super Delux with Aerator fixed in repair complete all as directed. Make- ESSCO (Jaquar) SQT-508KN or equivalent make of cera/Hindware

Vitreous China wash basin, white, flat back, size 550x400 mm with and including 32mm CP waste coupling, waste pipe, fixing brackets fixed in repair complete all as specified & directed.

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed

Preparation of new plastered surfaces of wall and applying three coats of white wash complete all as directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound emulsion over a coat of chalk whitening complete all as directed

Preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed. Note : Work will be carried out upto triple storied buildings.

Preparation of new wooden surfaces over 10 cm width or girth by rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and applying spirit lak dana polishing up to desired finishing as directed by GE complete all as specified and directed.

Preparation of old plastered surfaces of walls/brick masnory surface/corrogated AC sheet roofing by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint (SNOWCEM) complete all as specified and directed

Preparation of existing varnished wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic clear varnish complete all as specified.

M/s caspur construction company

SAI CONSTRUCTION

M/S PUNDIR BUILDERS

VERDHMAN ASSOCIATES

Meher enterprises

Sahil Builders