Cheramangalam Scheme - Urgent rectification works to canal sluice shutters to main and branch canal, maintenance of Vadakethara canal shutter and river shutter.

Amount

DISMANTLING existing shutter and hoisting bridge. EARTH EXCAVATION, DEMOLISHING, FORM WORK and CONCRETING.

od70488/2019_2020/MH : Dismantling of the Canal Shutter ( Less than 2 Tonne weight ) including . in correct alignment ; setting and aligning complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

od70489/2019_2020/MH : TAKING OUT the MUD debris and cleaning the bay, removing plastic and bio waste and disposing at suitable place 50m away from site

od70490/2019_2020/MH : HIRE charges of GENERATOR SET

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

SUPPLY, FABRICATION, PAINTING and ERECTION of SS and MS EMBEDDED PARTS

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od70491/2019_2020/MH : Fabrication and supply of Embedded parts of Canal gate ( Less than 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od70492/2019_2020/MH : Erection of the Embedded parts of Canal Shutter ( Less than 2 Tonne weight ) including . in correct alignment ; setting and aligning complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

od70493/2019_2020/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

SUPPLY, FABRICATION, PAINTING and ERECTION of MS SHUTTERS

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od70495/2019_2020/MH : Fabrication and supply of Structural steel canal gate ( Less than 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od70496/2019_2020/MH : Erection of the Canal Shutter ( Less than 2 Tonne weight ) including . in correct alignment ; setting and aligning complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

SUPPLY of SCREW ROD and WORM & PINION with mechanical stopper

od70590/2019_2020/MH : Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc complete

od70592/2019_2020/MH : THREAD LESS portion of the screw rod for 63mm dia screw rod

od70586/2019_2020/MH : Providing EN-8 screw rod 7.50 tonne capacity 4.00 M lift screw hoist having one number of EN -8 scerw shaft,worm gear units having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

od70510/2019_2020/MH : SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

SUPPLY, FABRICATION, PAINTING and ERECTION of HOISTING BRIDGE

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od70589/2019_2020/MH : supply of bolt and nut upto 300 mm length including cost of conveyance

od70587/2019_2020/MH : Fabrication and supply of Hoisting bridge and platform of Canal gate ( Less than 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od70588/2019_2020/MH : Erection of the hoisting bridge and platform of canal shutter ( Less than 2 tonne weight ) including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Bidder Name

SAI ENGINEERING