COMPREHENSIVE REPAIR / MAINT WORKS FOR MD JCOs / ORs ACCN AT JK ROAD, VIJAY LINES, MK LINES, NSL, OSL AND QUEENS ROAD AREA UNDER AGE B/R-I AT GE(N) AHILYANAGAR.

Amount

Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key, scrubbing down with water etc all as specified and as directed

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for special treatment ot sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid chemical and applying one coat chemical on plastered surface rendering again 10mm thick in CM 1:4 mixed with chemical filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 3.00 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement

M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement with WPC.Note:- WPC shall be measured & paid seperately.

M&L for rendering 10 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.

M&L applying two coats of OBD over a coat of primer on newly plastered wall surfaces iover 2 coat of wall care putty preparation of surfaces all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

Supply only integral water proofing compound.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Engineer-in-charge.

M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white washincluding scafolding at any height complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment and prepartion of surfaces including filling the cracks if any on surfaces of walls / ceiling and applying a coat of wall care putty & including applying primer and scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls including scafolding at any height complete all as specified and directed by Engineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of distemper oil emulsion on surfaces of walls including and scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of Apex exterior paint of required colour shade on surface of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Engineer-in-charge..

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Engineer-in-charge.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes

M&L PCC in 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.

S&F Vitrified Ceramic tiles in patches 8 to 10 mm thick (square/ rectangular) polished, of size 600x600, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 .

S&F vitrified ceramic tiles in patches 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36sqm,in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

S&F Non-skid Coloured ceramic tiles in patches 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

M&L for Glazed ceramic coloured tiles in patches in vertical surface 350*250*7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc.

M&L for machine cut kota stone flooring 18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc as directed by Er-In-Charge.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

M&L for machine cut cudappah stone 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 18 to 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including moulding or rounding of edges, machine polishing to edge to give high gloss finish complete all as specified.

M&L for rough dressed shahabad stone, 20 mm to 25 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

Fixing only 20 to 25 mm thick Rough dressed shahabad stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 including 15 mm thick screed bed in cement and sand mortar (1:6), etc complete all as specified and directed by Engineer-in-Charge.

M&L for laying 60mm thick factory made glossy finished chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand in sand cusion, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engineer-in-Charge

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

M&L for re-fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Re-securing or easing & adjusting, without taking down shutters of any description not exceeding 1 Sqm each.

Re-securing or easing & adjusting, without taking down shutters of any description exce 1.Sqm and not exceeding 2 Sqm each.

S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010

M&L for aluminium framed windows any pattern, fixed/ side hung/ silding (three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing all as specified Note-: (glazing shall be measured and paid separatly)

S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides .

S&F in repair for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Taking down old one and S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including CP handle, knobs, magnets all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges only shall be paid separately)

S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified inSSR part-I section 8 clause 8.20 (a) fitted to chowkats .

Hacking out old broken glasses any thickness, size, quality or description from wooden frames / metal frame (any type Frame) glazed with putty or fixed with bead all as specified and as directed.

S&F sheet glass ordinary quality 3 mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.

Ditto all as per ser item No 53 above but pin head type

S&F sheet glass ordinary quality 4.8 mm thick with oil putty exceeding 0.5 sqm in each pane all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

Ditto all as per above item but fixed in repair to steel / wooden shutters.

S&F in repair butt hinge, stainless steel 100mm long all as specified and as directed.

S&F in repair butt hinges stainless steel 75mm long all as specified and as directed.

S&F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

Ditto all as per ser item No 63 above but 150mm long

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long

Ditto all as per ser item No 65 above but 100mm long

S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.

M&L mild steel frame work such as grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0 and taking down old one .

M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Ditto all as per ser item No 69 above but on steel surfaces over red oxide primer

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

S&F of Harrison/curtain rails, stainless steel, chromium plated with fixing SS brackets, SS stops, SS rollers etc all as specifed and as directed by Engr-in-Charge. (All materials shall be stainless steel).

Taking down and re-fixing of Harrison/curtain rails, any type of brackets, stops, rollers etc

M&L for welding in repairs n exc 2.5cm in length n exc 6mm thick including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for welding in repairs exc 2.5cm and n.exc 5.00 cm in length n exc 6mm thick including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L in 18/19 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions and fixed in repairs.

S&F in repair Block board, grade 1 quality, exterior grade, commercial type with one side decorative face 18/19mm thick

S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as pecified, supplied and fixed in repairs.

Dismantling boarding, any description, fixed in wall or ceiling any position with nails complete all as specified and as directed

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specified as per manufacturere's instructions and all as directed.

M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed

S&F in repair vitreous china wash basin, white back, size nearest 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor. Make of Cera Code : S2040121 or other equvelent in approved make.

S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, including taking down old one complete all as specified and as directed.

S&F Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs including suitable size of PVC water closet seat cover excluding flush pipe and flushing cystren

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet (flush pipe) ball valve, float and handle including brackets and taking down old one complete all as specified and as directed. Make of Cera Code : B1010110 SN or other equvelent in approved make.

S&F in repair suitable size of PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.Make of Cera Code :B1510124 Regular or other equvelent in approved make.

S&F in repairs Towel Rail 600mm long of brass chromium plated D type with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make of Cera Code :F8030103 or other equvelent in approved make.

S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixed complete in wall ,floor etc including taking down old one all as specified and as directed.

S&F in repairs 32/40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store

Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

S&F for 15mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor

S&F for 20mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 250 ltrs n.exc. 500 Ltrs capacity.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 500 ltrs n.exc. 1000 Ltrs capacity.

Disconnecting existing tanks,exc 500 n.exc 1000 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position.

Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit.

S&F 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including brass gate valve crutch or butterfly handle and GI suitable nipple at outlet all as specified and directed .

.-ditto- all as per ser item No 101 above but 1000 ltrs

S&F in repairs PVC float valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe ferrule

S&F in repairs stop valves / angle cock cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated).Make of Cera Code :F2002201 or other equvelent in approved make.

S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.Make of Cera Code : F1003104 or other equvelent in approved make.

S&F in repairs 15mm dia Chromium plated fancy type long body Bib tap cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of Cera Code : F1015151 or other equvelent in approved make.

S&F in repair Brass chromium Brass CP wall mixer 3 in 1 system with provision of hand shower/overhead shower for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed. Make of Cera Code :F2002401 or other equvelent in approved make.

S&F in repair Brass chromium Brass quarter turn CP hole basin mixer without popup for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed. Make of Cera Code : F2002461 or other equvelent in approved make.

S&F in repair Brass chromium Brass Sink mixer without popup for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed. Make of Cera Code : F1015501 or other equvelent in approved make.

S&F in repair bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F in repair pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms)

S&F nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)

S&F in repairs for SS grating doom 125 mm dia with waste hole or without hole. (Minimum weight 40gms)

S&F any type of Unions/spindal brass to connect iron to polyethylene and fixed of 15 mm dia in repairs complete as all specifed and as directed.

S&F waste coupling of PTMT 32 / 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F in repair Brass chromium plated bottle traps of 32/40 mm dia for wash asins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union and 15mm bore 200mm long shower arm. Make of Cera Code : F7020305CH or other equvelent in approved make.

S&F shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes.

S&F 110 mm bore PVC (SWR) bends of any radius.

S&F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors / walls including taking down old pipes.

S&F PVC (SWR) bends any radius 75mm bore

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size nearest 915mm x 510mm bowl size 510mm x 405mm x 178mm

Supply and fix syphon kit for low level flushing cistern

M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste

M&L for Filleting in any position and to any shape in cement mortar 1:3 including all mitres, stops, etc Exc. 25 but n exc. 50 sq. cm

S&F in repairs Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm

M&L for Beads, I st class hard wood straight ( any size ) for glazed or gauzed joinery renewed including mitres etc. and removing old beads to store

M&L for flush pointing to random rubble masonry uncoursed or brought up to courses in cement mortar 1:4

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A,

Dismantling of plain or corrugated steel sheeting and asbestos cement (corrugated semi corrugated) any gauge, thickness, including ridge all as directed.

S&F Pre-painted Galvalume sheet shall be 0.50mm thick corrugated steel sheet (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge.

Supply and fix Pre-painted 0.50 mm thick plain, galvanised sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with, 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge.

Cleaning of blocked sewage line of the dia 75 mm to 300 by using bamboo sticks or MS rods and revolving with rope or with sludge sunction /pumping machine inside the sewer line between two manholes and cleaning the sewer line and pouring water under pressure and cleaning and clearing sewer line to efficient and smooth flow of sludge/waste water .

Cleaning of blockage from water closet, Gully trap,nahani trap, floor trap and bends by rodding thoroughly and pouring water under pressure and cleaning and clearing drainage to efficient and smooth flow of sludge/waste water all as specified and directed by Engr-in-Charge (the rates quoted shall be deemed included transport if reqd).

Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

.-ditto- all as per ser item No 142 above but 200 mm bore pipe

M&L for 150 mm bore Reinforced cement concrete pipe, type NP-2, laid and jointed complete with collars making necessary connection after cutting into existing sewer line/ manhole to make it functional complete all as specified as following.

M&L for 200 mm bore Reinforced cement concrete pipe, type NP-2, laid and jointed complete with collars making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .

M&L for 300 mm bore Reinforced cement concrete pipe, type NP-2, laid and jointed complete with collars making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) for man holes and drain cover slab all as specified and directed.

S& F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending hookinng etc and binding with MS wire 0.9mm dia(annealed)

M&L for dewatering of the following including desluding and pumping out effluent dirty liquid and sludge from bottom of manholes by sewage pump lifting the same upto 4.50 mtr depth of tank/MH incl. collecting sludge and dirty liquid into closed container and cleaning the manholes with fresh water, after wards opening the inlet of manhole for re-use and lifting the sludge to outside premises, as directed by Engr-in-Charge (the rates quoted shall be deemed included transport if reqd).

(a) Manhole of any dimension upto 1.50 mtr deep

(b) Manhole of any dimension exc 1.50 mtr deep but n exc 3.0 mtr deep

Taking down carefully existing unserviceable bitumen felt (any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500m from the building and depositing where complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified.

M&L for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed.

M&L for rendering 10mm thick CM (1:4) on roof slab top mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. (WPC shall be measured and paid separately)

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. here in after of pressure grouting shall be operated at the required locations). (ii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm.(iii) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq.M (iv) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures. (v) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm per coat over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed

M&L preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying special grade of primer PR-71 of chokesy chemicals 1.10 Kg/Sqm or equivelent of Dr fixit,Pidilite,Asian,Sika. Note:- Application of liquid water proof material only will be carried out thorugh manufactures.

M&L preparation for applying two coats (with colour pigment) of high performance PU based cold applied elastomeric coating having solid content 80% shore, a hardness Min 60,tensile strength 1.50 to 2.0 N/mm2 TECH O THANE PU white @ 0.95 Kg per Sqm (0.45 Kg /Sqm /per coat) with dry film thickness of 1 to 1.20 mm on previously primed surface of chokesy chemical or equivelent of Dr.Fixit, pidilite, Asian, Sika. Note:- Application of liquid water proof material only will be carried out thorugh authorised manufactures. 05 years waranty will be submitted by manufacturer.

M&L for cutting of existing cracks on wall up to last edge of crack and n exc 10 mm wide and clean the groove properly and fill crack with filler adhesive materials (Water proofing sealent) with gunating machine up to last edge of crack in two coat and apply two coat of wall care putty and 2 coat of oil bound distemper.

Removing tree from building with chemical treatment including scafolding at any height complete all as specified and directed by Engineer-in-charge.

M&L for joint filling by white cement or coloured cement with water proofing compound including grouting complete all as specified and as directed.

M/s. A P INFRA (BID ID -3416148)

Priyadeep Construction (BID ID -3416298)

HG PATHAN CONSTRUCTION COMPANY (BID ID -3416302)

MUDRIK ENTERPRISES (BID ID -3416053)

M/s A G Gund (BID ID -3416094)

M/S CHHTRAPATI CONSTRUCTION (BID ID -3416106)

Maruti Abhiyantriki (BID ID -3416318)

BHAVIN INFRA (BID ID -3416117)