REPAIR/REPLACEMENT OF UNSERVICEABLE MISC E/M EQUIPMENTS OF E/M INSTALLATIONS UNDER GE FORT KOCHI

Amount

S&F Plates Fe-410-W(Gde-E-250) quality-A (plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes,withour any attachments for cable duct covers etc complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, of size 50mmx50mm, 4mm dia wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 cum, getting out in soft /loose soil, returning, filling in and ramming earth in layers not exceeding 25 cm, watering and removing surplus earth from site complete all as specified and directed.

Material & labour for PCC 1:3:6 type C2 using 40mm graded aggregate in foundation and mass concrete all as specified and as directed.

Material and labour for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

Material and labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Gd.I, IS-432 (Part I) Part- I complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of synthetic enamel over one coat of Red oxide/Zinc chrome complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with Grey Cement and no pigment complete all as specified and directed.

Surface excavation in soft soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Removing excavated material in soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for Cement concrete type C- 2,1:3:6 (40mm graded aggregate) 100mm thick complete all as specified and directed.

Material and labour for Screening road metal, Chippings, etc. on the site of the work, when specially ordered including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) complete all as specified and directed.

Supply and laying synthetic rubber insulated mats 3.0 mm thick for voltage up to 33 kv (size 2x1m) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and as directed.

Taking down unserviceable main switch/DB, Teak wood boards etc, complete all as specified and as directed.

Taking down old unserviceable Sub main wiring and making good the disturbed surfaces complete all as specified and as directed.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS) including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc complete all as specified and as directed:-

(a) One fan point controlled by one switch.

(b) One fan point controlled by one switch.

(c ) One 3 pin 5 Amps socket outlet point on independent board.

(d) One 3 pin 5 Amps socket point on the same board with other switches.

All as per srl item no 18 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket complete all as specified and as directed.

M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed.

M&L switch socket combination 2 in 1, 3 pin, 5 Amps and 15 Amps flush type universal complete all as specified and as directed.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.

Supply and fix steped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed.

S&F MCB single pole, 240 volts 6 to 40 Amps, complete all as specified and as directed.

S&F MCB single pole and neutral 06 to 40 Amps, 240 Volts, complete all as specified and as directed.

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 8 way, 240 Volts complete all as specified and as directed.

M&L submain wiring surface type with 2 runs of single core 4 sqmm size PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing caping and its accessories including provision of one run of 4 sqmm PVC insulated single core unsheathed copper multistranded conductor cable as earth continuity wire complete all as specified and directed. Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC casing caping shall be measured as one running metre.

S&F in repair LED batten 1x 20/22 watt 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 265 Volts complete with necessary electric connection through suitable size flexible wire complete all as specified and as diretcted.

Cleaning of Sluice/butterfly valve chamber of any size/depth by taking out mud and muddy water and depositing the same to a distance n. exc 20 meter from the pit including swiping, free from any type of dirt including rectification of the leakage of valve of any size with cotton rope,glands,nuts,bolts of appropriate size if required at site incl white wash on the complete internal/external PCC surfaces of valve pit all as specified and dircted by Engr-in-Charge at site.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete as specified.

Rendering 10mm thick cement plaster 1:4 on fair faces of brick work or concrete surfacescomplete all as specified and as directed.

M&L for dismantling the existing unserviceable Sluice Valve and Supply and fix cast iron sluice valve of size 150 mm flanges and drilled type PN-1.6 as per IS -14846 including hand wheel, bolts, nuts and jointing materials complete all as specifed and as directed.

M&L for preperation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on surfaces of steel /iron pipes/panel etc. complete all as specified and as directed.

Material and labour for display board of size (1500mmx 700mmx200) made out of acryilic sheet 2mm thick fixed on 4 mm thick aluminium frame all around the board including 2 nos key holes for hanging on wall for bottom supports. The board shall include description of pump/motor/tranformer/lift/AC plant or any other machinery/layout/schematic diagram of water/electric supply/fire fighting system etc all as directed. letters/diagrams made out of computer aided print in acrylic material of any colour as specified incl provn of LED lights prewired and duly connecting it to nearby electrical circuit though switch with proper point wiring as specified in SSR complete all as specified and as directed. (Note: Desgin shall be approved by Engr-in-Charge).

Material and labour for display board of size (1200mm x 750mmX150mm) made out of bakelite (Hylam) sheet 2mm thick fixed on 4 mm thick aluminium frame all around the board complete for writing letters and arrow mark for installation/office building /complaint cell etc incl LED lights and prewiring complete.Display board should be mounted on both sides with 40mm dia stainless steel pipe of 1.2 meter height include necessary PCC work for foundation complete all as specified and as directed. (Note: Design shall be approved by Engr-in-Charge)

Material and labour for notice/display board of size (1200mmx600mm) incl premium flocked fabric (velvet) cloth on surface and mounted on soft board and aluminium frame all around the board including 2 nos key holes for hanging on wall complete for fixing SOP/Shock chart/fire chart etc complete all as specified and as directed. (Note: Design and colour of display board shall be approved by Engr-in-Charge)

Material and labour for electric shock treatment chart/ board of size (300mmx300mm) on soft board and aluminium frame all around the board including 2 nos key holes for hanging on wall complete all as specified and as directed (Note: Design of board shall be approved by Engr-in-Charge)

Material and labour for danger notice board of size (300mmx300mm) on soft board and aluminium frame all around the board including 2 nos key holes for hanging on wall complete all as specified and as directed. (Note: Design of board shall be approved by Engr-in-Charge)

Material and labour for two side folding floor sign board of ' MEN AT WORK' with plastic caution standing board strong build quality,digitaly printed polypropylene plastic complete all as specified and as directed. (Note: Design of board shall be approved by Engr-in-Charge)

Supply , lay, test & commissioning LT UG cable XLPE insulated sheathed and armoured, with aluminium stranded conductor, LT 1100 Volts grade of size 4 sqmm 2 core laid on wall/floor/roof etc incl taking down old cables complete all as specified and as directed.

HIGH TECH ENGINEERS AND CO (BID ID -3256413)