Road

Bill of Quantities

QUANTITY STATEMENT

It. No. Description of item Quantity Unit Total Amount

It. No. Description of item Quantity Unit Total Amount

1 Clearing & Grubbing road land including uprooting rank vegation grass

bushes shrabs saplings and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials.( C ) By 0.40 Hect. 28393.04

Mechanical Means Light Jungle ( SOR I No :26117C, Pg No: 96)

2 Earthwork for embankment including breaking clods, dressing with all

lead and lift and including watering rolling and consolidation of subgrade

in layer sat O.M.C. to required dry density including filling the depression

which occurduring the process using powerroller 8T to 10T. (E)From

Borrow area within 3.0KM. lead (26004EA)

3 Construction of Grannular sub base of in by providing GSB Gr - I coarse

graded material using B.T Metal 26.5mm to 53 mm @ 35 % ,26.5mm to

4.75mm 45% & Below 2.36mm 20 % in uniform layer with motor grader

on prepared surface mxing by mix in place method with vibratory roller to

achive the desired density complete as per close

4 Supplying and fixing reinforced concrete heavy duty non-pressure pipes

with collars for culverts carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M. 1:2 watering and laying 12.00 Rmt 1176.49

(to level or slopes) of class NP3 of following internal daimeters.(i)

mm dia. (26089ba)

5 Providing and laying cement concrete 1:4:8 (1-Cement : 4- coarse sand : 8-

hand broken stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A)Foundation and Plinth (05004a)

6 Providing and casting in site Controlled cement concrete M-250 for

average 200 mm thick as directed including compacting with surface

mechanical screed vibrating, mechanical floater, chennaling form work

and grooving including filling asphalt filer joint Excluding dowel bar, tie

bar expansion, construction and contruction joint as per insruction

engineer in charge.

7 Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4

including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8

including painting,lettering etc. complete (For O.D. road V.R.)

8 Providing and fixing Pre Cast Hectometer as per I.R.C. type design

including painting, lettering etc. complete.(ii) Fixing in C.C. 1:5:10 As Per 4.00 No. 356.50

S.O.R. I.Code. 26044 B Sr No. :

9 Providing and fixing guard stone as per I.R.C. type design including white

washing etc. complete.(ii) Fixing in C.C. 1:5:10 As Per S.O.R. I.Code. 75.00 No. 108.69

10 Road marking with hot applied thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass beads

@ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking should

provide liminance coefficinet on cemend road shalll be min 130 204.00 Smt. 367.72

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years. (S.O.R. 26161)

QUANTITY STATEMENT

It. No. Description of item Quantity Unit Total Amount

It. No. Description of item Quantity Unit Total Amount

11 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised

Pavement Markers made of polycarbonate and ABS moulded body and

reflective panels with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face and shall support a

load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with minimum

reflective area of 13 Sqcm on each side and the slope to the base shall be

35 +/- 5 degree. The strength of detachment of the integrated cylindrical

shanks, (of diameter not less than 19 +/- 2 mm and height not less than

30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing

will be by drilling holes on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as per manufacturers

recommendation and The color of the marker should be as per the IRC 35-

2015 and as directed by Engineer-in-charge.(26162)

12 Chevron sign :-Providing and fixing sign boards made out of 1.5mm

aluminium sheet / 3mm ACP (Aluminum composite Panel); size 60x50cm

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.3 mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of35x35x3mm; painted with bestquality

epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-B Type-4 Retro

Reflective sheeting (SOR 26171)

13 Cautionary Warning Sign :-Providing and fixing sing boards made out of

2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per

design of IRC-67-1977. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest

M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from

suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required;

painted with bestquality epoxy coatings in black andwhite bends. The

details of symbol foreach board shall be as per theinstruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer Grade(VR). 26092A.

14 Village name/ Bump Ahed sign :-Providing and fixing sing boards made

out of 2mm aluminium sheet; size 90 x 60cms. rectangle as as per the

design of IRC-67-1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-

1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size

iron angle of 50 x 50 x 5mm painted with best quality epoxy coatings in 2.00 No. 4842.24

black and white bends. the details of symbol or inscription / numerals for

each board shall be as per the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.

including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)... 26101A.

QUANTITY STATEMENT

It. No. Description of item Quantity Unit Total Amount

It. No. Description of item Quantity Unit Total Amount

15 Regulatory/Mandatory signs :Providing and fixing sing boards made out

of 2mm aluminium sheet; size 60cms. diameter circle as per the design of

IRC-67-1977 pre treated with phospheting process & acid eteching; coated

with one coat of epoxy primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with

best quality epoxy coatings in black and white bends. the details of symbol

for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each

leg. including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)... 26094a.

16 Direction (Junction) Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size

244x122 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM

D-4956 and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post

of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50x50x5mm; painted

with bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the supervision

of engineer in charge. (A) engineering grade. 26098A.

17 STOP SIGN:-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 90cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process & acid teching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with 1.00 No. 4676.06

best quality epoxy coatings in black and white bends. the details of symbol

for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each

leg. including excavation curing tec. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)... 26095a

18 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 30cms. rectangle as as per the design/drawing

attached (IRC) pretreated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm & 50 x 50 x 5mm painted with best

quality epoxy coatings The fixing at site shall be in 1:2:4 CC block of size

45x45x 60cms. for each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A) Engineer Grade(VR)...

QUANTITY STATEMENT

It. No. Description of item Quantity Unit Total Amount

It. No. Description of item Quantity Unit Total Amount

19 "KISANPATH LOGO" Board : Providing and fixing of KISANPATH

LOGO informatory sign board with Logo as per section 1700 of MORD

specifications and drawing. The board will be a composite unit consisting

of Two Plates of ACM (Aluminum Composite Material), material

specifications as per clause 17001.3. The top most plate will be of 3mm

ACP in diamond shape of 600x600mm size, riveted with MS angle iron

frame of 25mmx25mmx5mm size on back on edges. The Lower plate will

be of 4mm ACP of 1100x300mm size riveted with MS angle iron frame of

25mmx25mmx5mm size on back on edges. Riveting of all the sheets over

angle and flat iron frame will be done neatly to have plain surface on one

side. The angle iron frame of Both the plates will be welded to a 75mm

x75mmx6mm Mild steel post at Centre and this post will be embeded in

cement concrete M15 grade block of 450x450x600mm below ground

level. The height of the bottom of the lower plate will be 1200mm from 1.00 No. 217.40

normal ground level. The spacing between the diamond shaped plate and

Lower Plate is kept 150mm. MMGSY logo, letters and numerals on the

ACM should be made up of Retro Reflective sheeting of Type-1 AEGP

Class-A grade as per the latest MORD section 1700 and IRC 67-2012

specifications. Al the section of the frame and posts shall be painted with

primer and two coats of epoxy paint. The design, painting and lettering

shall be done as per the MMGSY Logo sign Design and as directed by

Engineer in-charge. A warranty for 5 years for the Retro reflective

sheeting for Type-1 Class-A from original manufacturer shall be submitted

Total Bid Price (in Figure)

Rupees Fifty Eight Lakhs Fifty Seven Thousand Nine Hundred

Nine and Paise Sixteen Only

I/We am/are willing to carry out the work at ___________% above/below the (percentage should bewritten in figure and words only)

Estimated rates as mentioned above,amount of my/our tender works out as under.

Estimated Amount Estimated Amount

Put to Tender: RS. Put to Tender: RS.

Net : RS. Total : RS.

In Words RS. In Words RS.

(Please Strike out whichever is not applicable)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Signature of contractor R&B (p) Sub Division, R&B (P) Division

Dholka Ahmedabad