PROVN OF LADIES AND GENTS TOILET BLOCK NO 17 1 DINING HALL AT AR RC NAINITAL AND REPLACEMENT OF EXISTING SODIUM VAPOUR SECURITY LIGHT WITH 60 WATT LED SECURITY LIGHT POST NO 3 TO ASC WASHING POINT AND BACK SIDE OF OFFR ACCN P 35 TO P 2 AT HALDWANI U

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class B old size brick straight curved on plan exceeding 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated material exc. 250m but n exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat surface complete all as specified and directed.

M&L for RCC type B1 1:2:4 using 20 mm graded stone aggregate, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for black Granite (of any type) tiles 18 to 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishig types in cooking platforms and like complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape requred, including cranking, binding spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

Supply only water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specfied and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as specified in clause No 8.2.1 of SSR Part-II complete all as specfied and directed.

S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F one piece floor mounted vitreous china EWC (size 690x390x770mm) with integrated flushing cistern, soft closing seat cover and necessary nut and bolts for fixing complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 455 gram complete all as specified and directed.

S&F in repair 15 mm bore PVC connections with PTMT Nuts of length 450mm long complete all as specified and directed.

S&F 15 mm bore dia angle cock, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20 mm dia, CP brass tubular towel rail, D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F of 15 mm bore dia stop valve, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm stone aggregate) as in sub base finished even and rough complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM 1:6 to receive floor finishes even and rough complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surace of tiles as floor/staps complete as all specified and directed.

M&L for glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces complete all as specified and directed.

M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick, light shade (square/ rectangular) polished area of each tiles n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment to match complete all as specified and directed.

S&F counter top wash basin white 460 mm x 460 mm size and round, square complete all as specified and directed.

S&F 15mm bore dia single lever chromium plated sink mixer table mounted complete all as specified and directed.

S&F vitreous China urinal, half stall type size (365mm x 335mm x 670mm)including urinal spreader, waste coupling and waste pipe, including providing and fixing plgs, bedding urinl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe complete all as specified and directed.

S&F 15 mm bore CP brass hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV Back Flow Preventer complete all as specified and directed.

S&F towel ring including necessary stainless steel screws, rawl plugs and washers complete all as specified and directed.

S&F vitreous China urinal partition of size 90x320mmx720mm complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for unlpasticised PVC pipe 110 m dia type B with wall thickness 4mm (mnimum) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 150 mm complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in cover slabs (for manholes etc) shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including necessary form work complete all as specified and directed.

M&L for old plastred or unplastered surfacses applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F rolled mild steel for joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe-410 (Gde E-250) complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for 32 mm dia CP waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors (rate included for making good disturbed surface) complete all as specified and directed.

S&F 75 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F 32 mm bore of pipe Low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

Taking down old unserviceable street light including all fittings complete all as specified and directed.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including clamp, nut, bolts, bracket made of GI pipe light grade dia 32mm, length not less than 1.5m, bent to shape for LED fitting for fixing of LED light on electric LT pole including 2sqmm PVC twin core aluminium cable from conductor to street light not less 2.0 meter testing to satisfaction of Engineer-in-Charge complete all as specified and directed.

M/S S R Construction

Ramsons

OM SAI ASSOCIATES AND DEVELOPERS