ICDS 2025-26 ,Construction of New Anganwadi Building at Village Sadadvera Pavar Faliya . Tal.Dharampur, Dist. Valsad (Re-invite)

Name of Work : ICDS 2025-26 ,Construction of New Anganwadi Building at Village

Sadadvera Pavar Faliya . Tal. Dharampur, Dist. Valsad

BILL OF QUANTITIES

Item No. Item of work Quantity Unit Rate In figures Amount

Excavation for foundation upto 1.5 m

depth including sorting out and

stacking of useful materials and

disposing off the excavated stuff upto

Meter lead. (B) Dense or Hard Soil ' ( I )

To 1.5 mt. Depth

Excavation for foundation for depth from

1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing

off the excavated stuff upto 50 Meter

lead.(B) Dense and Hard Soil ' ( II ) 1.5 To

Filling available excavated earth

(Including rock in trenches plinth, sides of

3 foundations etc. in layers not exceeding 20 9.50 Cu.Mt. 130.390

cm. in depth consolidating each deposited

layer by ramming and watering)

Providing & filling in plinth with murrum

or yellow soil or selected soil in layers of

20 cm. Thickness. Incl. watering, ramming

& consolidation etc. complete.

'Filling in plinth with sand under floors

5 including watering ramming, consolidating 4.50 Cu.Mt. 460.190

and dressing complete

Providing and laying cement concrete

1:3:6 (1- Cement : 3- Coarse sand : 6-

6 graded stone aggregates 20 mm nominal 7.36 Cu.Mt. 3313.290

size) and curing complete including cost of

formwork in (A) PCC

Providing and laying Ordinary cement

concrete M.250 and curing complete

inculding the cost of formwork but

7 Excluding the cost of reinforcement for 4.54 Cu.Mt. 4683.400

reinforced concrete work in foundation,

footings base of column and mass

concrete. (A) Footing

Providing and laying Ordinary cement

concrete M.250 and curing complete

inculding the cost of formwork but

8 Excluding the cost of reinforcement for 1.36 Cu.Mt. 8577.930

reinforced concrete work in All Types of

Column D) Column, Pillers, posts and

struts , upto Plinth

Providing and laying Ordinary cement

concrete M.200 and curing complete

inculding the cost of formwork but

9 Excluding the cost of reinforcement for 2.25 Cu.Mt. 8542.580

reinforced concrete work in All Types of

Column D) Column, Pillers, posts and

struts, upto Ground Floor

Providing and laying Ordinary cement

concrete M.200 and curing complete

inculding the cost of formwork but

10 Excluding the cost of reinforcement for 0.38 Cu.mt. 8582.980

reinforced concrete work in All Types of

Column D) Column, Pillers, posts and

struts, upto First Floor

Providing and laying Ordinary cement

concrete M.250 and curing complete

inculding the cost of formwork but

Excluding the cost of the cost of

reinforcement for reinforced concrete work

in Beams. (E) Beam, upto Plinth

Providing and laying Ordinary cement

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in All Types of

Beams,(E) Beam, Ground Floor

Providing and laying Ordinary cement

concrete M.200 and curing complete

inculding the cost of formwork but

13 Excluding the cost of reinforcement for 5.29 Cu.Mt. 6167.060

reinforced concrete work in All Types of

Slab,All Thickness (C) Slab upto Plinth

and Ground Floor

Providing and laying Ordinary cement

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Chajja. Upto

Providing TMT Bar FE 500D

reinforcement for R.C.C. work including

bending, binding and placing in position

complete upto floor two level,Ground

Floor, First Floor , Second Floor, Third

Floor, Terrace Floor (all floor).

Brick work using common brunt clay

building bricks having crushing strength

not less than 35 kg/sqcm. in superstructure

16 above plinth level upto floor two level in 33.23 Cu.Mt. 4295.990

cement mortar 1:6 (1 cement :6 fine sand)

etc.comp. (B) Conventional Ground Floor

Brick work using common brunt clay

building bricks having crushing strength

not less than 35 kg/sqcm. in superstructure

17 above plinth level upto floor two level in 3.55 Cu.Mt. 4336.180

cement mortar 1:6 (1 cement :6 fine sand)

etc.comp. (B) Conventional First Floor

'Half brick masonry in common brunt

clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 (1- Cement : 3 -coarse

sand ) in (B) Conventional Ground Floor

'Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of

single or Full/half brick walls for interior

plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:3

(1-cement :3-sand) Ground Floor

'Providing & laying10 mm. thick cement

plaster in single coat on fair side of

ceilings for interior plastering upto floor

two level and finishing with smooth mala

plaster.(i) Cement mortar 1:3 (1 cement :

sand) Ground Floor

'20mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12mm thick backing

21 coat of C.M. 1:3 (1-cement : 3-sand) and 174.49 Sq.Mt. 300.660

8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Providing throating or plaster drip and

moulding to R.C.C. Chhajja.

Providing and laying polished Granite

Slab 18mm thick in Flooring laid 20mm

thick Cement Mortar 1:4 (1-Cement : 4-

23 Coarse Sand) and jointed with Grey 9.92 Sq.Mt. 2234.120

Cement Slurry including full molded round

front edges , rubbing and polishing etc.

Providing and laying polished Granite

Slab 18mm thick in Risers of steps Dedo,

window sill, jembs and pillars laid 10 mm

thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey

Cement Slurry including full molded round

edges , rubbing and polishing etc.

Providing and laying Vitrified tiles, 24'' x

24'' in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar

25 1:3 (1-cement : 3-coarse sand ) finishing 55.34 Sq.Mt. 1073.130

with flush pointing in white

cement.Soluble Salt PVT. Tiles in All

Providing and laying Vitrified tiles, 24'' x

24'' in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with white

cement slurry Soluble Salt PVT. Tiles in

Providing and fixing flush door both sides

laminated andshutter fabricated from

mm thick solid core malemine faced three

layered pre laminated flat pressed wood

based exterior grade bonded BWP/BWR

synthetic resin having stamped IS

grade I type II including Stainless steel

decorative type designs fixtures / fastening

2Nos. Handles, 2Nos. Aldropes, towerbolt

etc.including I.T.W. triangular batten patti

of size 30m.m.x30m.m.etc. as per

architectural detailed drawing and as

directed by engineer in charge..

Providing and fixing FRP frame size

125x65 mm and 35mm thick FRP shutter

having extra reinforcement on sides &

edges in polish finish. The core of the

shutter & frame is to be filed up with

injected polyurethene foam done in situ

alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be

water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with necessary

screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 63.50 x

horizontal two track with Mosquitoe Net

member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding

29 shutters of horizontal member size 40mm x 6.50 Sq.Mt. 3477.630

vertical member of size 40mm x 18mm x

0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with

powder coated aluminum fittings and

fixtures and transparent silicon sealant

glass fixing to frame as per details etc

complete for window.

'Providing and fixing standared extruded of

alluminium section of size 63mm x

38.10mm x 1.2mm (Wt. 0.643 Kg/mt) with

colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

Providing and fixing M.S. grill of required

pattern of windows etc. with M.S.. flats at

required spacing and frame alround square

31 or round headed bolts and nuts or by 538.68 Kg 111.610

screws.including applying a priming coat

of red lead paint and two coats of oil

Applying two coats of Birla (white cement

based) or (acrylic lapy- putty) or

equivalent & two coats of primer of

approved brand and manufacture on new

wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

32 foreign matter and sand papered smooth. 133.50 Sq.Mt. 161.460

with Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface

to give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and

sand papered smooth.

Applying two coats of Birla (white cement

based) or (acrylic lapy- putty) or

equivalent & two coats of primer of

approved brand and manufacture on new

Ceiling surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

33 foreign matter and sand papered smooth. 45.90 Sq.Mt. 166.870

Ceiling painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated Ceiling

surface to give an even shade including

throughly brushing the surface free from

mortar droppings and other foreign matter

and sand papered smooth.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete. Priming: Apply a

liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours.

'Providing and laying integral cement

based water proofing treatment including

preparation of surface as required for

treatment of roofs, balconies, terraces etc.

consisting of following operations. (a)

Applying and grouting a slurry coat of neat

cement u ',brick bats is finally covered by

jointless cement plaster 20mm th. in C.M.

1:4 added with special water proofing

compound confirming to IS:2645 & top

smooth finished with trowel with false

chequered marking of 300 mm.size.The

treatment is carried along

Providing and constructing sandwitch type

Granite stone top & bottom Kota Stone

platform 0.6 mt. wide & 0.75 mt. height,

including front granite stone patti and top

granite skirting pati, vertical partitions of

Kota stone and Edge vertical granite stone

on Both sides with cement Mortar(1:1) as

required comp as per drawings and

Instruction of Engineer incharge.

Providing and fixing wash down water

closet (European type, W.C. Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover to

be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour,

Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as

lead valve less syphon, 15mm nom.nal size

brass ball valve with polythene float, C.P

brass handle unions and couplings for

connections, with inlet, outlet and

overflow pipes, 40mm dia.porcelain

enamelled flush bend including cutting

holes in walls and making good the same

connecting the flush bend with cistern and

closet (overflow pipe to be measured and

paid for separately)(A) Vitreous China (I)

In white colour, Providing and fixing

plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber

buffers. (B) Black plastic seal and cover,

With Jet spray heavy duty with S.S.

Braided hose 60 cm long.

Providing and fixing washbasin with single

hole for pillar tap with C.I. or M.S.

brackets painted white including sutting

38 holes and making good the Providing and 2.00 No. 2463.460

fixing C.P. brass waste for washbasin or

sink. (A) 32mmdia.,Providing and fixing

pillar tap, stop tap, bottle trap etc.

Providing and fixing PVC SWR Nahni

trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter

39 of self cleansing design with C.I scread 4.00 No. 571.080

down or hinged grating including the cost

of cutting and making good the walls.

Providing and fixing screw down bib taps

40 of following size.(A) Brass screw down 7.00 No. 186.830

bib tap polished bright. (i) 15mm dia.

Providing & fixing of overhead shower

mm (3”) dia with 3 flow with Overhead

Shower arm 200 mm with wall flange

complete (i) 15mm dia.,Providing and

fixing brass screw down stop tap.(A)

Providing and fixing Kitchen sink with

C.I. or M.S. brackets, painted white

including cutting holes in walls and

making good the same (C) S.S. & Sink.(i)

600mm x 450mm x 150mm size with

Providing and fixing C.P. brass waste for

washbasin or sink, piller tap, stop tap,

bottle trap etc.

'Providing and fixing Gun metal check or

43 non-return fullway wheel valve. 25mm. dia. 2.00 No. 420.630

Providing and fixing Gun metal check or

44 non-return fullway wheel valve. 40mm. dia. 2.00 No. 663.430

'Providing and fixing chromium plated

brass half turn flush cock of approved

quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

Providing and fixing ball cock of

46 approved. quality as directed.(A) Copper 1.00 No. 132.890

Metal (A) 25mm. dia.

Providing laying and jointing in true line

and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line

and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line

and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing, laying and jointing in true line

and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one

end plain and other end socketed with

rubber ring, & fittings conforming to ISI

14735-1999 of approved make for

drainage system pipe line, pipe shall be

jointed with each other with rubber

50 lubricant, pipe shall be fixed on wall using 12.00 Rmt 836.730

of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

Providing and fixing S.W. gully trap with

C.I. grating brick masonry chamber and

water tight C.I. cover with frame of

51 300mm x 300mm size (inside) with 1.00 No. 1246.920

standard weight.(i) Square mouth traps.(B)

150mm x 100mm size P or R type

Constructing Brick masonry road gully

chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal

grating wih frame complete.

'Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.

'Providing & fixing G.I. Rain water spout

of 50 mm.dia & 30 cm length etc.

Providing and fixing in position cowel

went to pipes.(C) 100mm dia

'Providing erecting and fixing double

coated PVC. (ISI) water tank of required

56 capacity each with all necessary fittings 500.00 Ltr 3.950

and connection etc. complete on terrace.

Providing Sock pit of 5.0 Cum Volume

(internal diameter of 1.50 meter) including

Excavation and filling brick bats with dry

masonary work attop for 45cm height

including covering the top with R.C.C.

57 SLab with One Man hole and C.I. cover of 1.00 No. 25286.360

0.60 x 0.45m , including providing vatas in

Cement Motar 1:3 with the finishing

curing and necessary connection with the

septic tank outlet etc complete as directed

by Engineer in charged.

Providing septic tank of inside dimensions(

2.5 mt. x 2.0 mt.x 1.5 mt.) as Directed by

incharge with brick masonary of CM 1:6

the foundation floor with 1:5:10 B.B.C.C.

finished with 15 mm C.P. in C.M. 1:4 root

cover of R.C.C. slab inclunding connection

pipe from inlet and outlet etc.comp.

Providing of Bala Work for Anganwadi

like Wall paintings on inside and outside

walls upto the Slab height or lintel height,

Measurements - vertical Scale Paint, Wall

arts, Black board, Drawings of Animal,

59 birds, Vegetables, Nutrition chart,Days- 1.00 Job 30300.000

Months, Making Yojana Logo Board with

all the deatils, writing bruilding name in

paint on the front side, etc complete as per

Annexure (A) & as per Directed by

Engineer in charged.

'Providing, erecting & Fixing Fibre

Fabricted make childern Slide fit for

children age group coming to Anganwadi

60 and approved by Engineer in charge, in the 1.00 No. 10100.000

playground of approved brand and quality

at the site ad directed by engineer in Charge

Providing, erecting & Fixing Fibre

Fabricted make childern Swing for

children age group coming to Anganwadi

61 and approved by Engineer in charge, in the 1.00 No. 11110.000

playground of approved brand and quality

at the site ad directed by engineer in Charge

Providing Cello/Nikamal two Seat

polypropelene Plastic Junior Well finished

Study/Play Table with Chairs for Kids

62 from 3-10 Years (Attractive colours like 5.00 No. 3030.000

RED/Yellow/Green) with all necessary

charges and taxes as Directed by the

Engineer in charged.

Supplying & installing of Dry Chemical

Powder type 6 Kg. Capacity fire

extinguisher as per I.S. 2171 ISI. Mark

with necessary fittings etc. complete.

Providing and fixing kitchen platform

trolley having three drawers of SS (IS 304)

of required size like thali, katleri,

perforated, partition, cupsosar type in

kitchen platform having drawer front side

and backside by using 19mm thick all

64 proof plywood of ( IS 710 ) quality all side 2.41 Sq.Mt. 17281.100

laminated etc. as directed. The size of SS

(IS 304) basket of size 4" to 18" for thali,

dish, katleri, perforated, partition, cupsosar

type as directed including necessary S.S.

fittings, handles, nobs, telescopic channels,

etc. as directed

'Providing Office table with wooden top

of approved brand Ply base of appropriate

thickness of required dimensions with base

support made up of Waterproof Ply of

65 approved Brand(ISI make) on site with all 1.00 No. 5555.000

necessary fittings , Fixtures like handles

and adhesives,etc complete of design

directed by Engineer incharged

Providing Chair with armrest with leather

/PVC / Mesh finish and proper cushion on

66 site with all necessary fittings , Fixtures 2.00 No. 4040.000

and adhesives,etc complete of design

directed by Engineer incharged

Providing and fixing of Polished Kota

Stone / Kadapa for making Horizontal

Shelves on wall using appropriate

adehsive/motar and making appropriate

vertical supports wherever necessary in

brickwork or Kota Stone and and jointed

with gray cement slury mixed with pigment

to match the shade of slab and making the

site cleaning as original with all necessary

material and labour charges etc complete

as per design directed by Engineer

I/We am/are willing to carry out the work at…% above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Deputy Executive Engineer Executive Engineer

Panchayat (R&B) Sub.Division Panchayat (R & B) Division

Dharampur Valsad