Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.9 LAccepted-AOC | 1 | Accepted-AOC ACCEPTED BEING L-1 | |
| 2 | 2₹17.7 L+₹1.7 L (10.3%)Rejected-AOC | 2 | Rejected-AOC REJECTED NOT BEING L-1 | |
| 3 | 3₹18.6 L+₹2.5 L (15.5%)Rejected-AOC | 3 | Rejected-AOC REJECTED NOT BEING L-1 | |
| 4 | 4₹22.8 L+₹6.7 L (41.8%)Rejected-AOC | 4 | Rejected-AOC REJECTED NOT BEING L-1 | |
| 5 | 5₹27.5 L+₹11.4 L (70.8%)Rejected-AOC NA | 5 | Rejected-AOC REJECTED NOT BEING L-1 |
| Sl No | Description | Qty | Unit | VIVEKA ENTERPRISES L4 | M/S SAI ENGINEER L3 | M/S Bharmouri Construction L1 | K KUMAR & CO L5 | M/S ER CONSTRUCTIONS L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L removing of blockage from WC/floor trap/Nahani upto 1st manhole and flushing with water for cleaning including removing the sludge if any out of MOD land and burried the sludge in pits of depth exceeding 1.50m and of required size and covering pits with minimum 30cm thick layer of earth work complete all as directed. complete all as specified and directed.
Note:-
(a) The contractor will depute a person for collecting complaints from concerned executives and solve the complaint within 48 hrs
(b) If contractor failed to rectify the complaint within 48 hrs, the panel recovery for each complaint shall be twice the quoted rate per day for delay period. | 2,000 | Each Job | 100 ₹2,00,000 | 90 ₹1,80,000 | 40 ₹80,000 Lowest | 50 ₹1,00,000 | 55 ₹1,10,000 |
| 2.00 | Desludging of soakage well/soakage pit/septic tank/manhole by taking out sludge from inside of soakage well/soakage pit/septic tank/manhole and removing the sludge out of MOD land and burried the sludge in pits of depth exceeding 1.50m and of required size and covering pits with minimum 30cm thick layer of earth work complete all as directed and to the entire satisfaction of Engir-in-Charge (solid deposited sludge only to be measured).
Note : All T&P and pumping set shall be provided by the contractor. | 600 | Cum | 300 ₹1,80,000 | 220 ₹1,32,000 | 170 ₹1,02,000 Lowest | 500 ₹3,00,000 | 175 ₹1,05,000 |
| 3.00 | De-watering of soakage well/soakage pit/septic tank/manhole by taking out water collected in soakage well/soakage pit/septic tank/manhole and removing the same out of MOD land. The water desposed off in a pit of require size complete all as directed and to the entire satisfaction of Engr-in-Charge (liquid volume above solid sludge deposition to be measured).
Note : All T&P and pumping set shall be provided by the contractor. | 2,000 | Cum | 300 ₹6,00,000 | 175 ₹3,50,000 | 180 ₹3,60,000 | 200 ₹4,00,000 | 162.5 ₹3,25,000 Lowest |
| 4.00 | M&L cleaning of existing sewage pipe lines 10mm/150mm/200mm internal dia at any depth including manholes by removing the manhole covers of any type/size and cleaning by means of hydraulic jet pressure machine manually as required at site from manholes and well flushing with water after cleaning including getting out sludge if any and liquid materials from connecting manholes deposited in sewage line removing the solids and sludge to any distance and covering the same in pit, excavation, returning filling and removal includes in the rate quoted and reinstating the manhole cover to its original position (cost of removal of sludge/liquid material from sewage lines and manholes in same line is incl. in rate of this item and rate quoted also includes for keeping particular sewage line which is undertaken once for cleaning, functional for full contract period) complete all as specified and directed. | 3,000 | RM | 40 ₹1,20,000 | 40 ₹1,20,000 | 10 ₹30,000 Lowest | 50 ₹1,50,000 | 10 ₹30,000 Lowest |
| 5.00 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.. | 5 | Cum | 350 ₹1,750 | 500 ₹2,500 | 300 ₹1,500 | 1,000 ₹5,000 | 50 ₹250 Lowest |
| 6.00 | Excavation in trenches, not exceeding 1.5m wide and not exc 1.5m in depth for foundation and getting out in any type of soil, complete all as specified and as directed. | 20 | Cum | 160 ₹3,200 Lowest | 220 ₹4,400 | 260 ₹5,200 | 500 ₹10,000 | 300 ₹6,000 |
| 7.00 | Excavation over area, not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and directed. | 30 | Cum | 160 ₹4,800 Lowest | 200 ₹6,000 | 300 ₹9,000 | 500 ₹15,000 | 300 ₹9,000 |
| 8.00 | M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling mass concrete complete all as specified and directed. | 6 | Cum | 4,000 ₹24,000 | 5,000 ₹30,000 | 2,800 ₹16,800 Lowest | 4,000 ₹24,000 | 4,500 ₹27,000 |
| 9.00 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. | 4 | Cum | 5,000 ₹20,000 | 6,500 ₹26,000 | 4,000 ₹16,000 Lowest | 6,000 ₹24,000 | 4,500 ₹18,000 |
| 10.00 | M&L for walling of random rubble, un-coursed, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and directed. | 6 | Cum | 2,800 ₹16,800 Lowest | 3,000 ₹18,000 | 3,000 ₹18,000 | 3,000 ₹18,000 | 3,500 ₹21,000 |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
3 Dec 2025, 6:00 pmClosed
CWE YOL
HEADQUARTERS COMMANDER WORKS ENGINEER YOL
REPAIR/REPLACEMENT OF SEWAGE LINE, SEPTIC TANK AND SOAKAGE WELLS/PITS AND CLEANING OF EXISTING SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL/PITS AT ALHILAL MIL STN
2025_MES_739410_1
CWE/Y-80/2025-26
Open Tender
Civil Works
Item Rate
334 days
ALHILAL
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE PALAMPUR
₹54,000
Yes
14 Jan 2026
12 Nov 2025
10 Dec 2025
12 Nov 2025
3 Dec 2025
26 Nov 2025
Amount
M&L removing of blockage from WC/floor trap/Nahani upto 1st manhole and flushing with water for cleaning including removing the sludge if any out of MOD land and burried the sludge in pits of depth exceeding 1.50m and of required size and covering pits with minimum 30cm thick layer of earth work complete all as directed. complete all as specified and directed. Note:- (a) The contractor will depute a person for collecting complaints from concerned executives and solve the complaint within 48 hrs (b) If contractor failed to rectify the complaint within 48 hrs, the panel recovery for each complaint shall be twice the quoted rate per day for delay period.
Desludging of soakage well/soakage pit/septic tank/manhole by taking out sludge from inside of soakage well/soakage pit/septic tank/manhole and removing the sludge out of MOD land and burried the sludge in pits of depth exceeding 1.50m and of required size and covering pits with minimum 30cm thick layer of earth work complete all as directed and to the entire satisfaction of Engir-in-Charge (solid deposited sludge only to be measured). Note : All T&P and pumping set shall be provided by the contractor.
De-watering of soakage well/soakage pit/septic tank/manhole by taking out water collected in soakage well/soakage pit/septic tank/manhole and removing the same out of MOD land. The water desposed off in a pit of require size complete all as directed and to the entire satisfaction of Engr-in-Charge (liquid volume above solid sludge deposition to be measured). Note : All T&P and pumping set shall be provided by the contractor.
M&L cleaning of existing sewage pipe lines 10mm/150mm/200mm internal dia at any depth including manholes by removing the manhole covers of any type/size and cleaning by means of hydraulic jet pressure machine manually as required at site from manholes and well flushing with water after cleaning including getting out sludge if any and liquid materials from connecting manholes deposited in sewage line removing the solids and sludge to any distance and covering the same in pit, excavation, returning filling and removal includes in the rate quoted and reinstating the manhole cover to its original position (cost of removal of sludge/liquid material from sewage lines and manholes in same line is incl. in rate of this item and rate quoted also includes for keeping particular sewage line which is undertaken once for cleaning, functional for full contract period) complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed..
Excavation in trenches, not exceeding 1.5m wide and not exc 1.5m in depth for foundation and getting out in any type of soil, complete all as specified and as directed.
Excavation over area, not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling mass concrete complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
M&L for walling of random rubble, un-coursed, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and directed.
All as per the description of serial item No 10 here-in-before but except stone. Note : Old stones obtained against demolition shall be used.
Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size fly ash bricks, built in cement mortar 1:4, complete all as specified and directed.
All as per the description of serial item No 12 here-in-before but except bricks in cement mortar 1:6. Note : Old bricks obtained against demolition shall be used.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed.
Removal of excavated materials (soil) to a distance not exc. 50 metre and not exc. 250 metre and depositing where directed at a level n. exc 1.5m above the starting point, complete all as specified and directed.
Rendering 15mm thick plaster on fair faces of brick or concrete surface in CM 1:4 finished the surface even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided (reinforcement cut as required to facilitate demolition), complete all as specified and directed.
Precast reinforced cement concrete, M-15 (Nominal mix), type B-1 (using 20mm graded crushed stone aggregates), as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed. Note: Reinforcement shall be measured and paid separately
RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushe stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Form work to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Mild steel TMT bars 5mm dia and over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed .
Rolled mild steel section such as joint, channel, tee sections or angle iron or other section without connecting plates fixed independently as in frames for manhole cover etc conforming to Fe-410-W, gde E-250 complete all as specified and directed.
Dismantling of PVC drain pipes of internal dia 100mm, jointed in cement mortar and taking out of trenches/fixed to wall including all fittings complete all as specified and directed.
Dismantling of PVC drain pipes of internal dia 75mm, jointed in cement mortar and taking out of trenches/fixed to wall including all fittings, complete all as specified and directed.
PVC (SWR) 110mm bore of pipe single socketed in any length with rubber ring joints, fixed to walls, ceiling, floors etc complete all as specified and directed.
PVC (SWR) 75mm bore of pipe single socketed in any length with rubber ring joints, fixed to walls, ceiling, floors etc complete all as specified and directed.
S&F in repairs PVC (SWR) 110mm bore bends complete all as specified and directed.
S&F in repairs PVC (SWR) 75mm bore bends complete all as specified and directed.
PVC (SWR) 110mm bore branch pieces (Double 'Y') equal or unequal complete all as specified and directed.
PVC (SWR) 75mm bore branch pieces (Double 'Y') equal or unequal complete all as specified and directed.
PVC (SWR) 110mm bore junction single, (single 'T') equal or unequal complete all as specified and directed.
S&F PVC (SWR) 75mm bore junction single, (single 'T') equal or unequal complete all as specified and directed.
25mm thick PCC 1:2:4, type B-0, (using 12.5mm graded aggregate) as in floor finished rough to receive floor finishes,complete all as specified and directed.
Vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, setting trap and pan in lime concrete and jointing to flush pipe (fixed in repairs) and making good disturbed surfaces of floor and match with existing floor, complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with fixing bolts & PVC seat cover with chromoum plated mild steel hinging device etc. including connection to trap, flushing pipe, anti-syphonage pipe, (excluding flushing cistern and flushing pipe) and and making good disturbed surfaces of floor and match with existing including taking down the existing old one complete all as specified and directed.
S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed.
S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.
S&F in repairs vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed.
Demolition of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, incl dismantling complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base etc and finished the surface even and smooth without using extra cement complete all as specified and directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete including demolition of existing tiles and removal outside the MoD land complete all as specified and directed.
Removing of existing filling in sunken floor WC/EWC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 150 micron polythene and testing to water tightness then filling with PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate and inserting 32mm bore 70 cm long GI water spout to the wall complete all as specified and directed. (Note: EWC & tiles shall be measured and paid separately)
32mm bore, PVC waste pipe for WHB, sink, urinal, complete all as specified.
CP grating with or witout hole, fixed in poistion with cement, fixed in repair, complete all as specified.
Taking up or down 15 mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed by Engineer in Charge.
Taking up or down 20 mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed by Engineer in Charge.
Steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required, complete all as specified and directed.
Steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required, complete all as specified and directed.
M&L cleaning and removing all scale and dirt etc. from tanks exc 250 & not exc 500 ltrs and from mouths of circulating pipes, etc incl marking date of cleaning of tank with paint complete all as specified and directed.
M&L cleaning and removing all scale and dirt etc. from tanks exc 500 & not exc 1000 ltrs and from mouths of circulating pipes, etc incl marking date of cleaning of tank with paint complete all as specified and directed.
S&F in repair fancy pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F in repairs 32/40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete al as specified and directed.
S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed.
S&F in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed.
S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing, union and cap and fixed complete all as specified and directed.
S&F center hole brass chromium plated wall mixture for mixing hot and cold water, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed.
S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed .
S&F in repairs 100/110 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed .
Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 24 of tender doucments.
M/S ER CONSTRUCTIONS (BID ID -3494093)
M/S SAI ENGINEER (BID ID -3488781)
VIVEKA ENTERPRISES (BID ID -3485008)
K KUMAR & CO (BID ID -3494278)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
E-tender80.pdf
Tender Documents • 1.43 MB
BOQ_827946.xls
BOQ • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .