Providing installation, testing and commissioning of One No. Thirteen (13) passengers electric traction elevator in warehouse for storage of Electronic Voting Machine (EVMs) and VVPATs at Dharamshala Distt. Kangra (HP)

Amount

Providing installation testing and commissioning of electric traction 13 passenger elevator to relevant standard to be erected with following Specifications:

TYPE & CAPACITY: Elevator Approximately 884 Kg,13 Persons

SPEED (mps):1.0 meter per second

DRIVE: A.C.Variable voltage variable frequency with 16-Bit Microprocessor.

Motor: Permanent Magnet EcoDisc Gearless Motor to be placed in the machine room directly above Hoist way.

Travel: Approximate 15 meters [First Floor to 3rd Floor]

Serving: 04 Stops 04 Openings 4 Levels [All on the same side ]

Hoistway required: 1800 MM [wide] x 2600 MM [deep] Clear Dimensions

Headroom Required: 4000 MM beyond finished floor level of last landing

Pit Depth Required: 1600 MM below the finished floor level of first landing

Car Size: 1100 MM [wide] x 2000 MM [deep]

Car Enclosure: Constructed out of Stainless Steel Panels in hairline Finish.

Car Entrance: Center Opening Automatic Stainless Steel Panels in Hairline Finish with a clear opening of 900 MM [wide] x 2200 MM [high]

Hoistway Entrance:Center Opening Automatic Stainless Steel Panels in Hairline Finish with provision of Emergency Key Opening at all Landings with a clear opening of 900 MM [wide] x 2000 MM [high]

Door Operation: Automatic D.C. Door Operation with adjustable Door Opening and Closing timings

Control: Simplex Full Collective Control with or without attendant

Operation: Automatic

Power Supply: 415 Volts, 3 Phase, 50 Hertz Alternating Current

Fan:1 No. with 300 MM Sweep

Flooring: Black granite Flooring as per standard

Lighting: Diffused LED Lighting in car

Indicators: Digital 7 Segment Direction and Position Indicators in both car and at all landings

Other Features:   Battery Operated Emergency Light with Rechargeable Battery  Battery Operated Emergency Alarm with Rechargeable Battery  Adjustable Guide Shoes  Micro Movement L.E.D. based Buttons  Hands Free Press and Speak Intercom.  Load Weighing device with overload Bypass feature  Steel items, Door Frames Sill Angles, Fascia Plates, Spring Buffers.  Automatic Phase Reversal Device  System Capable of withstanding +10% to –20% Variation in Supply Voltage Fluctuations  KDS 90 – Call registration: White with hall lantern and indicator at all landings  Manual Break Lever  Stainless Steel Handrail  Additional Car Gate Lock  Automatic Break Testing  full height Infrared Safety Curtain  Braille Fixtures  Kick Plate / Skirting  Lift Announcement System to announce floor levels in English language only  Car Operating Panel  Landing Door Fire Rated for two hour  Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel  2 Phase Device Fire Man Drive  Fire Man Switch at Main Lobby  Car False Ceiling in Stainless Steel Finish  Pit Ladder  Motor compatible for 180 Starts Per hour.  Automatic Rescue Device to bring the Elevator to a nearest Landing in case of power failure.

The prices of complete job as per the specifications above shall be inclusive of steel Items, 3 way intercom- press and speak, floorannunciator with music, fireman switch minor Civil Building works,Chipping, Lift licence, free service for one year, Scaffolding etc. All sundry fittings, assemblies, accessories, hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not.

Makes:- Kone/Johnson/Mitsubshi/OTIS/Thysion

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Make:- Legrand(Myrius), L&T(Oris), Havells(Roma Plus)

Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make:- Legrand(Myrius), L&T(Oris), Havells(Roma Plus)

2x1.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:- Legrand(Myrius), L&T(Oris), Havells(Roma Plus)

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. ( Make:- Legrand (Myrius)/ SSK(Lica)/ Anchor Roma (Plus)

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Make: L&T/ Legrand/Schneider

Single pole. 6 Amp

Single pole. 16 Amp

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Make: L&T/ Legrand/Schneider

Double pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Make: L&T/ Legrand/Schneider

Double door-8 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Make: KEI/SCI/Havells

Armoured cable 25 sq. mm (3.5 core)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make: Usha/Bajaj/Crompton

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and fixing LED Bulk head of following rating made of aluminium housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Bulk head fitting 10 watt.

Makes:- Panasonic (Cat No PBHM01107)/Bajaj/ Wipro/Philips

Providing and fixing LED tube fixture (including the cost of Batten/channel and LED Lamp) of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED tube fixture 18 Watt

Makes:- Havells (Cat. No. Batten 1X18WDSBSWH & Cat. No. 18WLED865SPC)/ Wipro/Philips

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.

63 Amp. Category-A

Regular examination, lubrication and Adjustment of the equipment and planned maintenance in the systematic manner and replacement of parts as detailed below:-

(i) Renew all wires ropes and chain to maintain an adequate factor of safety, to equalie tension on all hoisting ropes, repair or replace conductor cables and hoist way and machine room elevator wiring.

(iii) Examine periodically all safety devices and governor and all customary safety test.

(iv) The firm will provide emergency minor adjustment all back services 24 hours as all working days as well as holidays/ Sunday. The firm will maintain the lift in reliable and efficient operating connections.

After free/under warranty annual repair and maintenance for Ist Year

Second Year @

Third Year @

Fourth Year @

Fifth Year @

PRAGATI ELECTRICAL AND ELECTRONIC CO