Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dhari, Khambha, Rajula & Jafrabad of Amreli District for One Year Under M & R to Handpump.

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance,

Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with

latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dhari, Khambha,

Rajula & Jafrabad of Amreli District for One Year under M & R to Handpump.

Executive Engineer,

Public Health Mechanical Division,

Gujarat Water Supply & Sewerage Board,

Email : [email protected]

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dhari,

Khambha, Rajula & Jafrabad of Amreli District for One Year Under M&R to Handpump.

Schedule showing the material to be supplied from the store of GWSSB for the work

contracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. Rate Rs. Unit Place of

No. Delivery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought

by the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled materials

at the rate of current SOR from contractor bill.

Signature of Contractor. Executive Engineer,

P.H.Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dhari,

Khambha, Rajula & Jafrabad of Amreli District for One Year Under M&R to Handpump.

Qty. Rate Per Amount

No. Particulars

Providing light commercial (medium) four

wheeler Diesel vehicle on rental basis for one

day (particularly for H.P repairing works) with

1 Driver & POL(Per day) (The vehicle shall be fully 1 1175928

insured with fitness certificate & PUC) with

Semi skilled Labour (Per day) & 03 Unskilled

Labour (Per day) for year.

2 Hand pump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with

A-1 Hexa. Nut M-12x1.75 & Washer 4 mm 1200 5.56 Set

A-2 Hex. Bolt M 10 x 1.50 x 40 mm long 250 2.58 No

A-3 Nylock Nut M10x1.50 250 1.72 No

A-4 Handle Axle (Stainless Steel) 50 73.92 No

A-5 Washer (4 mm thick) for Handle Axle 0 1.29 No

A-6 Bearing (No.6204-Z) 250 27.63 No

A-7 Spacer(for pump Head) 50 4.26 No

A-8 Chain with Coupling 300 68.32 No

A-9 Bolt for front cover M-12x20 mm long 30 2.27 No

Volume III: Price bid Page

Pump Head Assly. Consi. of Item No.(1)

to (7) as per Fig.3.1

(B) SPARES FOR CYLINDER

B-1 Pump Bucket 1500 4.63 No

B-2 Sealing Ring 1000 3.00 No

Upper Valve Assly comp. consi. of item

as per fig 3.6 A (Part no 1 to 4 & 8 to 9)

Lower Valve Assly comp. consi. of item

as per fig 3.6 B (Part no 5 to 7 & 10)

WATER TANK consi. of item as per fig

Cylinder With Brass Liner consi. of item

(E) REDUCER CAP 100 69.54 No

(F) Spares for Conne. Rods

Hexagonal Coupler M-12 x 1.75 x

(G) UPPER VALVE ASSEMBLY SPARES

G-1 Upper Valve Seating 50 1.53 No

G-2 Plunger Yoke Body 50 111.25 No

G-3 Bucket Spacer 50 86.25 No

G-4 Follower 50 104.88 No

G-5 Plunger Rod (S & S) 50 87.58 No

G-6 Upper Valve (Guide) 50 47.50 No

(H) LOWER VALVE ASSEMBLY SPARES

H-1 Check Valve Seat 50 80.66 No

H-2 Check Valve 50 66.25 No

H-3 Check Valve Seating 50 2.29 No

Volume III: Price bid Page

H-4 Rubber Seat Retainer 50 36.63 No

Handle Bar consisting of Item no (1) &

Cylinder Assly Comp. consisting of Item

no (1) to (7) as per Fig

Conn. Rod Electro Galva. consisting of

Item no (1) to (3) as per Fig

Special Tool Kit for I. M.-II Hand pump

(L) Consi. Item (1) to (11) as per IS 15500 0 6249.60 Set

Part-8 with tool box

Standard Tool Kit for I. M.-II Hand

(M) pumps Consi. Item(1) to (16) as per IS 0 6340.32 Set

15500 Part-8 with tool box

Third plate consisting of Item (1) & (2)

Spares for deep well Hand pump-Extra

Cylinder Body with Brass Liner

O-1 consisting of Item no (1) for body fig 0 525.60 Set

5.2 & (2) for brass linear Fig 6.1 B

Handle Bar consisting of Item no (1) to

Upper Valve Assembly complete

O-3 consisting of Item no (1) to (11) as per 0 570.00 Set

O-4 Follower as per Fig 6.7 0 161.25 No

O-5 Bucket Spacer-Lower as per Fig 6.5 0 75.21 No

Manufacture Supply & Delivery of ISI Marked

32 mm dia medium quality galvanized mild

steel tubes (Continuously welded electric

3 resistance welded (ERW)/high frequency 450 211.86 Mtr.

induction weled (HFIW) /Hot finished welded

(HFW) type screwed at both ends to IS:554/

1985 for pipe suitable for water and gas

application, socket on one end and other end

Volume III: Price bid Page

protected with plastic thread protector in

approximate length of 3 mtrs conforming to

IS:1239 (Part-I) 2004 With latest amendment

and socket to conforming to IS:1239 (Part-II)

1992 With latest amendment

Total Cost for one year (Vehicle with manpower + HP Spares Consumed in year + 32

mm GI pipe consumed in year)

1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender

of the Volume I (GCC).

2. Contractor has to keep number of manpower for each repairing team as per the condition

no. 1 of the Special Condition of the Volume II (Technical Bid).

3. Payment will be made as per the deduction conditions mentioned in the Volume I (General

Commercial Terms Conditions).

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 1575425.00 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Signature of Contractor Executive Engineer,

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta.Dhari,

Khambha, Rajula & Jafrabad of Amreli District for One Year Under M&R to Handpump.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor

Executive Engineer,

P.H. Mech. Division.

Volume III: Price bid Page