S.R. to Court building at Dhanpur Dist. Dahod (Repairs to Indoor - Outdoor colour work, compound wall, Toilet)

No. Figures Amount

1 Wall painting (two coats) with plastic emulsion paint of approved 1389.00 Sqm. 90.48

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth in

2 Wall painting (two coats) with plastic emulsion paint of approved 1761.00 Sqm. 84.82

brand and manufacture on undecorated wall surface including

applying acrylic wall putty & scraping of old colour from the surface

to give an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

3 Finishing wall with weather proof exterior emulsion paint on wall 3249.00 Sqm. 122.14

surface (two coats) to give an required shape even shape even shade

(shade should be company tainted ready to use) after thoroughly

brushing the surface to remove all dirt, dust and remains of loose

powdered materials etc. complete.

4 Providing and laying Ceramic tiles 6mm thick in flooring treads of 40.00 Sqm. 1017.30

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

5 Providing and laying ceramic tiles 6mm thick of approved standard 10.00 Sqm. 1070.50

quality in skirting, risers of steps and dedo laid on 10mm thick cement

plaster 1:3 (1-cement : 3 coarse sand) and jointed with white cement

6 Providing, laying and jointing in true line and level I.S.I. mark 110mm 90.00 Rmt. 897.79

dia. U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end

plain and other end socketed with rubbering & fitting conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diameter x 149 mm length

x 145 mm height at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

7 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100mm 4.00 No. 600.23

diameter with jali of the following nominal diameter of self cleaning

design with C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

8 Removing dry or oil bound distemper by a washing and scraping and 6399.00 Sqm. 11.82

sand papering the wall surface smooth including necessary repairs to

scratches complete.

9 Dismentaling tiled of stone floors laid in mortar including stacking of 50.00 Sqm. 50.28

serviceable materials and disposal of unserviceable materials with all

lead and lift..

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

10 Providing laying and jointing in true line and level I.S.I. mark 15mm 40.00 Rmt. 72.65

dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials.

11 Providing laying and jointing in true line and level I.S.I. mark 25mm 60.00 Rmt. 91.84

dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials.

12 Painting two coats (excluding priming coat) on previously painted 1088.00 Sqm. 117.73

steel and other metal surface with synthetic paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

13 Applying two coats of primer of approved brand and manufacture 3249.00 Sqm. 65.65

on existing wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

14 Constructing Sandwitch Platform of 18 mm thick Polished Black 4.80 Sqm. 4429.86

Granite at top and 25 mm thick Kota stone slab using cement mortar

1:3 for sandwich and fitting at bottom & edges with waterproof rigid

adhesives including making necessary grooves in walls with Vertical

Kota stone 30 mm x 2 No sandwitch thick every 60 cm centre to centre

including all labour material of approved quality including full moulded

round front edge fixed in wall for partition and jointed with grey cement

slurry including rubbing and polishing etc. complete.

15 Providing and fixing Stainless steel Kitchen Sink Glossy ASIS 304 2.00 No. 2417.94

grade and 1 mm thick with over all size 610 x 460 x 330mm deep

having bowl size 560 x 410 x 200 mm of Nirali brand or equivalent with

all fittings with C.I. or M.S. brackets painted white/ or fixing on stone

base including cutting holes and making good the same, C.P. brass

waste and M.I. fisher union fittings including all necessary fittings.

TOTAL Rs.

Rs. Twelve Lakhs, Sixty Thousand Five hundred Twenty Nine and Fifty Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Limkheda (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Limkheda Dahod Dahod