Substsationn road

retarring

75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

OD405463/2025-2026:Levelling undulation between 20mm & 40mm with 12mm aggragates by spreading the premix (formed of 1 cum of loose aggragate mixed with 48 kg of bitumen vg 30) to line and level ,rolling to dense surface,including cost of bitumen, aggragates, all conveyance, heating ,mixing, compacting and other sundry expenses

OD405464/2025-2026:Levelling undulation less than 20mm with 12mm aggragates by spreading the premix (formed of 1 cum of loose aggragate mixed with 48 kg of bitumen vg 30) to line and level ,rolling to dense surface,including cost of bitumen, aggragates, all conveyance, heating ,mixing, compacting and other sundry expenses

75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)

OD405465/2025-2026:Sectioning/surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm and disposal of rubbish lead upto 50 m and lift upto 1.5m kind of soil