Partition works for Administration and Accounts section in the existing Library Area at ICAR-CTCRI

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and falseceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion: Powder coatedaluminium(minimumthickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS: 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, paneling and dashfasteners to be paid for separately) :For shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and makingprovision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (Fittings shall be paid for separately):Powder coated aluminium(minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofengineer in-charge.:Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item): With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction ofEngineer-in-charge complete.Upto 5mm depth and 5 mm width

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) foraluminium doors including necessary cutting and making good etc.complete.

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-incharge : Powder coated minimum thickness 50 micronaluminium

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sagelastomeric PU sealant over backer rod of approved quality as per architecturaldrawings and direction of Engineer-in-charge complete, complying to ASTM C920,DIN 18540 F & ISO 11600 :Upto 10 mm depth and 10 mm width

Providing and applying white cement based putty of average thickness 1 mm, ofapproved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete.

Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound ) content. With waterthinnable cement primer on wall surface :having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50grams/ litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour. :Two coats

5A Modular sockets -as pethe Sl.No.Bl specification

Switches fixed in Modular boxes ( 4 Sockets and 4switches in each box) as pethe Sl.No.Bl specification

Ceramic wash basin with basin taps and necessary fittings as pethe Sl.No.C1 specification